Resume - • Knowledge in Geochemistry, Geophysics, Well Logging, Oil Phase, Structure Dri...

Misco Jobs

Resume #77269

CONTACT INFORMATION:
View contact information...

Profession: WELL TESTING ENGINEER
Residence Country: United Arab Emirates

CAREER OBJECIVE

Geologist with over 4 years in different well service disciplines with more concentration on Production & Drilling services.
My professional career started as geologist, after that joined the Well Test Engineering at AL AHLIA Oilfields Development Company Abu Dhabi, UAE.

EMPLOMENT HISTORY

*December 2005 – Present: Well Test Engineer
(Al Ahlia Oil field Development Co.)Abu Dhabi, UAE.
Highlights: some consultant jobs.

*August 2005 –February 2006: production geologist
(Egyptian Drilling Co.) Cairo, Egypt.

EDUCATION

 Qualification: B.SC. of Geology (Faculty of Science, AL AZHAR University, Egypt)
 Specialization: general graduation (Geochemistry, Production, Drilling).
 Graduation year: May20 – 2004
 Graduation degree: very good
 Project title: Good, Reservoir Project

PROFESSIONAL EXPERIENCE

* December 2005 - Present: W/T Engineer
Al Ahlia Oilfield Development Co. (UAE).

Around 3 years as surface Test Eng. Started as junior testing operator then upgraded as a senior operator carry out the night supervisor duties as:

* Visit the well location even it was offshore tower, rig or rigless sites, meet
The client, discuss the operation then define the job requirements.
* Carry out the mobilization & equipments spotting in a suitable manner then start the rig up and pressure test operations.
* Carry out varity testing jobs ( Clean up, Modified Isochronal, production or Capacity, Killing, Pumping and Flaring jobs) for both Oil & Gas wells at Onshore and offshore.
* Performing on site water analysis. Tests include finding the specific gravity, TDS, pH, Titremetric and spectrometric analysis of various compounds in the sample. Finding oil & gas gravity, Salinity. Measuring H2S and CO2 concentration of well fluids
* I have finished about 75 Gas Well in BAB Field, as rigless operation.
* Handle the test equipments such as Separator (1440, 2000),SSV, ESD Panel, Sand filters, Choke manifold, Eruption manifold, Heaters, Acidizing &Sweetening unites, Water treatment unit, Loading equipment, Tanks firm, Generators, Compressors, Burners, Calibrating and Metering devices.
* Collecting all the required data during the operation beside pressurized, unpressurized samples, calculate the flow rates (gas, oil, water), curing the data & put it in a daily report for production department.
* Loading all the maintenance operations at yard for the previous equipments
* Developing group member, safety & operation trainer inside the company.
* Support the shared service branches (perforation- DST-Coiled tubing – Wire line- Pumping – PVT sampling – Multi Phase Meter).

* Attending courses trips to improve my self, the company system and provide a variety service for the clients.

* Performing (TBT) Tool box talk before each job which gives a short safety briefing and covers the:

 Work plan procedure
 Identifies risks and hazards and how to control them
 Emergency procedures

*August 2005-February 2006: Production Geologist
Egyptian drilling company
Around Seven month at a company working in drilling at shallow &deep depths, started as a training geologist, provide the company with all data about Direction Drilling, Well logging, all structure properties for all types of Rocks.

* CLIENTS WORKED FOR: ADCO CO., ADMA CO., ZADCO CO,
TOTAL CO.
* WORKINING AREA: ONSHORE, OFFSHORE

SKILLS:

* Knowledge in Geochemistry, Geophysics, Well Logging, Oil Phase, Structure Drilling, and Direction Drilling and Economic Geology, mud operation, oil gas analysis, 3D interpretation, Well testing operation.

LANGUAGES & PC.COURSES

* Arabic: Native Language.
* English: Fluent in both written and spoken.
* Full using of PCs, dealing with various windows versions.
* Office Group (Excel – Word – Power point).
* Internet – Maintenance courses.

TRAINING EXPERIENCE:
* A training period in Schlumberger Co. (Egypt)
* A training period in Halliburton Co. (Egypt)
* A training period in PetrobelCo. (Egypt)
* A training period in Suez oil Co. (Egypt)

PERSONAL DATA:
NATIONALITY: Egyptian
DATE OF BIRTH: 24 /3 / 1982
RELIGION: Muslim
MILTARY STATUS: Finished
MARITAL STATUS: Single

SAFTEY COURSES (ABU DHABI)
* PTWS (Permit To Work System).
* Basic first aid.
* Offshore survival.
* H2S Awareness & Breathing apparatus.
* Fire fighting.
* Authorization of gas testing & using of testing instruments.

ADDTIONAL INFORMATION
* Good physical condition and health.
* Have safety passport.
* Hard worker &excellent team spirit, Capacity to work under high pressure.
* Performing the job at best and safety manners according to HSE policies.
* Willingness to work out doors.

INTERESTES & HOBBIES
Computer, Reading, Sports and Cars.

REFRENCES
References are available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2501 to 2550 of 7040)

Go to Search Parameters...

Brief Description

I am an Electrical Engineer from Colorado School of Mines. I have worked for two major oil companies. I have worked on several areas of energy industry as an Electrical Engineer.

Customer service, Training and I & C; Problem Solving + fault finding; Contract negotiations / Presentations; Flexibility and adaptability to rapid changes

A result oriented professional with 15.0 years of experience in Production Planning and Control, Quality Assurance, Operations & maintenance and Projects. Currently associated with Equate Petrochemical Company, Kuwait

I have 3 yrs experience as a Mud Engineer and a landscape irrigation license. I am also working toward a Masters in Project Management

Perform a loop checking to check the data output from Field to DCS should be no Tolerance and Testing the Integrity of the Loop and the operation of any recorders or similar devices installed in the loop.

Seeking a suitable challenging position in the field of Electronic & Telecom Engineering which gives scope for future growth and learning opportunities.

15yrs In the Indian Navy as a Hydrographic Surveyor, served onboard various Indian Naval Surveying Ships and four years as a Hydrographic Surveyor with Fugro India Pvt Ltd worked on various survey ships and offshore construction Barges in oil and gas field.

Very Good Experience in Honeywell DCS,Safety Manager

Hplc Chemist,Responsible for Research & development of Analytical chemistry methods

Free! I come with17 yrs exp in the technical, operational and management aspects of Well Completions in the Oil & Gas industry. I am interested in rewarding and challenging opportunities as a Completions / Well Services / Well Test Consultant where I can contribute from my wealth of experience.

A seasoned professional with rich experience of 3.5 years in the areas of process engineering, equipment erection and commissioning with specialisation in the area of Oil and Gas Industry.

Work as Instrument Technician in oil & gas for almost 9 years. Familiar with most of the instrument and equipment for calibration. Work with Petronas,Malaysia before and now with Ras Gas,Qatar.

Electrical Engineer

Detail Driven Engineer with an experience of 3 years. Diploma in Mechanical Engineering and a track record of success in consistent achievement of engineering project goals.

Well Test and C&WI services, i.e., Coiled tubing, acidizing, sand control, wireline, Fracturing, cementing, well testing, slickline, e-line, perforation programs, down hole plugs, x-mas tree change outs, and other.

Maintenance and Commissioning of Process control Instruments in Oil and gas Plant.Trouble shooting and faultfinding of ESD and DCS loops.Servicing and calibration of Control valves,pressure,flow,temperature,level control instruments.

2+ years of experience in Automation field. Currently working as Executive Engineer in M/s.Yokogawa India Limited

Analytical chemistry lab-skills for testing materials in quantitative and qualitative purpose with conventional or instrumentation techniques (UV-VIS, Atomic Absorbance and Infra Red Spectrophotometry, High Performance Liquid Chromatography, Gas Chromatography, Flamephotometry.

I have over 36 years in the Oil & Gas Industry. International experience on land & offshore. Experience in remote location logistics. Have worked in desert, mountains, & jungle. Have drilled HTHP wells with oil base mud. Experience drilling horizontal & underbalanced. Spanish Speaking.

Bachelor in Engineering - Metallurgical Engineering.

BE in Mechanical Engr

Design Engineer-Static Equipments with 4 years Experience

Ensuring good quality control of mud system by analysis of drilling Mud additives

Have 10 years in cementing, tools and drill stem testing

MIET Polytechnic, Trichy, India Diploma in Mechanical Engineering, St.Joseph's Higher Secondary School, Trichy. Engineering Group

FEED, DFR, RFP, Detailed Engineering

GULF EXPERIENCE

Instruemnt engineer( PLC ,DCS ,ESD,field instruments )

My name is Adenowo Tosin Akeem, i hold a Bachelor of Science (B.Sc) degree in Earth Sciences(geology). Am interested in your reputable firm which i believe would need my experience. The following is a brief on my experience;

A highly motivated and experienced Construction and Structural Supervisor , with experience in oil and gas industry. An awareness and commitment to HSE implementation. Valuable team member, able to work on oBrief Description:* (Plwn initiative, with excellent man management and communication skills.

Experienced in Planning & Scheduling, Good knowlege of Primavera and MS-Project Software Operations, etc. HND in Mechanical Engineering

I have done post graduation in Geophysics with 1st class/A Grade. i have a year of seismic servicing industry experience working as an Assistant Geophysicist in one of the leading geophysical companies in Pakistan furthermore i have done 4 weeks internship in Prospect Generation Department of OGDCL

Drilling Fluids Engineer, Power Plant Engineer

A hard worker who can create mechnical design. Knowledgeable 3D design such as Autodesk Inventor and Solidworks and can give from the scartch design. Have designed various of automated machine such as test handles, coveyors, laser handlers, jigs and fixtures.

Mechanical engineer, autocad, offpipe, microsoft

Specialized in Corrosion & Materials Technology, Failure analysis, Quality control and Project Management

Electronics Engineer with 7.75 years of exp. in installation, testing, commissioning and troubleshooting of Satellite communication equipments and Vessel Traffic Management Systems which includes Radar Systems, AIS, VHF Systems, Hyd/ Met. Stations, etc

Flow Assurance Engineer

I am Graduated in M.Eng in Petroleum Reservoir Engineering from University of Calgary - Canada in 2006. I have more than two years of experiences in Research Institute of Petroleum Industry (RIPI), National Iranian Oil Company in reservoir simulation projects.

4 1/2 years oil & gas engineering experience (of which 3 years upstream) in conceptual, front end and detailed design.• Bachelor of Mechanical engineering, 2000-2004, from Visvesvaraya Technological University Karnataka, India with First Class.• Post Graduate Diploma in Petrochemical & Refining,

Procees Engineer With 5 Year of Exprience

Diploma Instrumentation, B. Tech Electronics(Appeared) , Skill in Automation Technologhy. Experties in Simens System, step7 , PCS7

I am seeking a Well Site Geologist/Mudlogging position with a quality, client service oriented company. I have worked in Environmental Consulting and Mudlogging/Well Site Geology. My oilfield experience is in Utah, primarily in the Uintah Basin, and also in Colorado, New Mexico, Wyoming, and Texas.

Instrumentation Design Engineer with 5 years experience in Petrolium,Oil&Gas,Fertilizer EPC projects. Knowledge of INtools,AutoCAD,Instrucal,PDMS,Flowel,conval. Knowledge of instrument specifications,loop drawings,JB schedule,INdex,I/O list,Technical Recommandations,Hookup,BOM,wiring

COMPUTER LITERATE MS Excel .MS Word. MS Power Point, (CMMS) Main Saver : JDE Edwards and Maximo & Electrical & Instrument Technician

B.Tech mechanical Mechanical Sr. Sales Executive in Leading MNC.

• Knowledge in Geochemistry, Geophysics, Well Logging, Oil Phase, Structure Drilling, and Direction Drilling and Economic Geology, mud operation ,oil gas analysis ,3D interpretation , Well testing operation.

Technical Sales manager - Electrical Engineering

Caterpillar field service engineer

Piping Designer, MicroStation, Power (Nuclear, Fossil, etc.), Petrochemical, Chemical, Heavy Industrial.

First Prev [ 51 ] 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out