Resume - High Voltage Electrical Testing and Commissioning and Electrical Start-up

Misco Jobs

Resume #77575

CONTACT INFORMATION:
View contact information...

Summary:

As an Electrical Start-up Field Engineer with over twenty years of experience in Power Generation and T&D Projects my experience includes testing of Generators, Substation Transformers, Circuit Breakers and other High Voltage Components of 69KV to 500KV as well as Private Industry indoor Metal-Clad Switchgear of 480V, 4160V and 13.8KV. My Power Generation experience has been to perform start-up and commissioning of Generating Stations and associated Relaying, Synchronizing, Pumps and Motors, DCS Loops and Balance of Plant Electrical Systems.

Employment History:

Independent Contractor References – Darren Kimbrough (225)-261-7807
March 1997 to Present Kelvin Wrenn (713)-302-2377
Position: Electrical Start-up Engineer Marshall Kennison (225)-270-3302

Job Description: Perform testing and commissioning of power plant construction projects. The scope of work is from providing initial Back-feed Power to Transformers to the Synchronization of Generators to the Grid. Perform Electrical Start-up Commissioning of 480V MCC's, 480V Motor Run-ins and DCS Loop Checks to Valves and Pumps. Perform PLC Programming for 480V Buckets. Also perform Construction and Installation Supervision over Electrical Contractors and Testing Groups.

Gulf Western Electric, Inc.
Field Testing and Start-up Services
10538 Kentshire Court
Baton Rouge, La. 70810

January 1990 to March 1997
Position: Electrical Field Engineer

Job Description: Performed high voltage NETA testing within Power Plants, Substations, Refineries and Paper Mills. Testing included Doble testing of Transformers and Circuit Breakers, Hi-pot testing of Shielded Cables, ratio testing of CT's and PT's as well as setting and testing of Protective Relays. I also performed installation of 480V and 4160V Switchgear, 480V MCC's and associated Motors for Balance-of-Plant Electrical Systems.

Resume of
TROY E. DAVIS 850-723-9639

Gulf States Utilities (now Entergy Co.) Gulf States Utilities (now Entergy Co.)
Transmission and Distribution Relay Dept. River Bend Nuclear Station
P.O. Box 2431 P.O. Box 220
Baton Rouge, La. 70821 St. Francisville, La 70775

December 1984 to January 1990
Position: Transmission and Distribution Relayman

Job Description: Calibrated and maintained Transformer Differential, Bus Differential, Impedance Distance, Over-current and Frequency Relays within Transmission and Distribution Substations. Calibrated and maintained Negative Sequence, Loss of Excitation, Reverse Power and other Generator Relays within Generating Stations. Tested and maintained the RTU/SCADA system used for remote control of T&D Substations. I performed high voltage switching orders for Line and Circuit Breaker Isolation.

Overseas Project Assignments:

* Egyptian Electric Authority Generation Project – Cairo, Egypt
Two 825MW GE Steam Turbines (GE Start-up Technician)
* Black and Veatch Coco Power Substation Project – Rayong, Thailand
138KV Substation (ABB Field Engineer)
* Mitsubishi Mansiloc Generation Project – Mansiloc, Philippines
ABB Switchgear Testing (ABB Field Engineer)
* Enron/NEPCO Transfield Generation Project – Smithfield, Australia
Two GE Frame 7 and One Steam Unit (Start-up Engineer)
* Enron/NEPCO Ecoelectrica Generation Project – Penuelas, Puerto Rico
Two GE Frame 7 and One Steam Unit (Start-up Engineer)
* SCECO Relay System Modernization Project – Dammam, Saudi Arabia
Saudi Consolidated Electric Co. (Relay Technician and SME)
* Kwajalein Island Generation Project – Kwajalein, Marshall Islands
Six Caterpillar Diesel Units (Relay Technician)
* Yerevan International Airport Utility System Upgrade – Yerevan, Armenia
Substation Installation (Field Testing Engineer)

Personal:

Education: Sullivan Technical Institute - 1981
Louisiana State University - 1985
Age: 44 years old

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 7051)

Go to Search Parameters...

Brief Description

Instrument Design engineer having 6+ yrs of experience

POST GRADUATE - MTECH MECHANICAL (FROM NIT NAGPUR-INDIA),STORAGE TANK

Electrican and Instrumentation Design and Site Construction. LV Distribution, MCC, UPS, Lightings, Field Instrumentation, SCADA, Shutdown Systems, Fire and Gas Systems, Gas Station Facility Design, Pipeline Facility, Cathodic Proteection

I have 20 years experience across the petrochemical industry, including Petrochemical refining, offshore gas compression, FPSO experience, and fixed platform oil/gas separation and export. Supervisory/Control Room/Commissioning. In many countries, Singapore, Dubai, Qatar, Brazil, U.K.

Over 20 years of various offshore vessels, ship yards, offshore rig, gas platforms, drill ship and engine factories as Oilier, Junior Engineer, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Chief Engineer, experience with expertise in following: Supervision and Tra

Experienced in Oil and gas projects.

Time served Electrical Engineer with 16th Edition qualification.

Danish marine geologist. Experienced in acquisition and interpretation of seismic data - scientific production of 6 papers on the topic. Seismic facies and texture interpretation. Experianced in Landmark interpretation tools. Fluvial, deltaric and coastal environment interpretation.

14 years experience in piping, pipeline and mechanical engineering within the oil and gas and petrochemical industries. Experience of all project phases including Estimation, Front – End Engineering, Detailed Design, Construction and Commissioning.

B.Sc. of Petroleum Engineering from Suez Canal university with general grade “Good“ in may 1992 Refining Eng. Branch.

Drilling Engineer: Challenge-driven and decisive professional offering nearly 16 years of experience as Drilling Engineer / Production & Operations Engineer on land, jackup, and off-shore platform drilling rigs. US & International.

PETROLEUM ENGINEER HAVING 16 YEARS OF VERSATILE EXPERIENCE IN PRODUCTION OPERATIONS.

To work for a company in the petroleum/oil field that allows professional and personal growth.

A position utilizing strengths in leadership and technical operations to accomplish Company objectives. Willing to travel and/or relocate.

Total 18 years of design and project management experience in offshore and onshore construction field. Working in M/S Oil & Natural Gas Corporation Limited of India (ONGC) since July, 1985. Documentation and project implementation under ISO 1994 / 2000 for past 4 years.

I have More than 16 years experience with pioneer engineering companies. My major experience is as “Document Data Controller/ Incharge Design Department, refineries and process industries. I am ready to join on short notice.

Extensive experience as an engineer with proven ability to be a part, manage, and provide support and team supervision for startup / acceptance testing, troubleshooting, calibration, and maintenance of systems. Experience in applying UL, NEC, NFPA, CSA, and FM codes and IEEE standards.

Process Engineer working with DSM(Work Exp. 5 years)

Reservoir simulation, reservoir rock and fluid characterization, production optimization, static and dynamic test analysis

High Voltage Electrical Testing and Commissioning and Electrical Start-up

I have worked as a Contracts Engineer in both Drilling and Production for more than 20 years, primarily for Shell and Esso. Recently I moved back to Canada after working overseas for 17 years. I am now looking for either ad-hoc or rotational work either in Canada or internationally.

Drilling Engineer now working with NIKO Resources Ltd as a well Site Drilling Eng. and has worked with Oilex Ltd. australian Comapny as NSD,Night drilling Supervisor Niko Resources Ltd west block India, Drilling Eng. Sun Drilling Kazakisthan, Trainee directional Driller Mitchell Drilling (Australia)

EXPERIENCED METALLURGIST & INSPECTION ENGINEER

I am a Diploma holder in Electronics discipline and one year Instrument mechanic in chemical plant, more than eleven plus years of experience in various plants & projects like Petrochemicals and Refineries. In these years, I have acquired the knowledge of Maintenance, testing and commissioning of d

Well- organized innovative and result oriented Person. Flexible attitude, highly energetic, innovative. Willingness to learn & accept new challenges. Ability to perform under crunch situations. Major strengths are good communication skill, ability to work independently and as well as a team L

To obtain a position that suits my qualifications

To be a dynamic, dedicated, respected and recognised Engineer and to contribute relevant experience to the position applied.

Material Balance, PVT analysis, Reserves Estimation, Production Enhancement, Workover, Decline Curve Analysis, Pressure Surveys, Field Surveillance and Development

Professional with experience oriented to the seismic interpretation in the exploratory and production area, synthetic seismograms, velocity conversion, Geological and attributes seismic map generation, Evaluation, plan and execution of new wells drilling. Integration geophysical data with petrophysi

Safety officer with more than four years experience in construction field and oil and gas

I am seeking employment as a Petroleum Engineer in Production, Workover & Completion engineer, where I have had some experience of off shore & on shore production workover operations. I believe that my education, experience, and training will enable me to make a significant contribution in differen

5+ Years Experience in field Engineering, Instrumentation, Automation and Control, Mastering Honeywell EXPERION and YOKOGAWA CENTUM CS3000, Outstanding Skill in HMI/MMI Design

Five (5) years of work experience as PDS Designer. Results oriented and enthusiastic professional with a solid background in piping design and lay-out. Proven record in delivering quality works and consistent in meeting deadlines. Quick learner, easily adapting to new system of works.

E&I Engineer

A Professional Engineer with over 4 years' experiences in Process Control Systems for the design, development & implementation of process control applications, Extensive knowledge in Honeywell Distributed Control Systems' (DCS) Hardware & Software: -TDC 3000/TPS& ExperionPKS systems and FSC, SM Tric

CHEMICAL PROCESS ENGINEER IN PETROCHEM/OIL/GAS INDUSTRY EXPERIENCE

A professional petroleum engineer based in Hassi Messaoud, Algeria, with over 5 years of experience in various aspects of petroleum engineering. Looking for a challenging and interesting opportunity world-wide. Fields of interest: Reservoir engineering. Production engineering. Petroleum engineering

BE with first class. Action taking, decision making, high confidence level, good team leader, good communication skills, hard working, excellent faultfing skills, logic development and control configs.

Seeking a position to utilize my skills and abilities in the Civil Engineering Field that could offer professional growth while being resourceful, innovative and flexible.

Pressure vessels, Heatexchangers and tanks designre

Project Construction and Commissioning Coordinator, Concentrating for MD Totco System Mud Logging Systems

Manager, design systems, HSE mechanical service

Bachelor Mech Engg, FEED preparation and review, preparing PMS, piping standards and specifications, developing plot plan, piping layout and isometrics review, piping MTO, MR/PR, bid evaluation, dwg approval, stress analysis using CAESAR-II, Tender inputs for construction

I graduated with a second class upper division in Chemical Engineering from LAUTECH, Nigeria and a holder of MS Petroleum Engineering from UI, Nigeria. I have beeing Working as a research assistance since 2006 with an experience in Paints industry.

outdoor field technician

Designer, Drafter

Carry our inspection activities on static equipment as per specified inspection test plan or inspection work list given by client in accordance mentioned codes and standards

Experienced Mechanical Designer. Over twelve years drafting experience with ten years of design experience designing automated and semi-automated assembly machines for the automotive powertrain industry.

Graduate Mechanical Engineer with expertise in Design of Process plant equipment like pressure vessel, columns, reactors, tanks, skids etc. having expereince more than 6 years,.

layout ,project management,model review

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out