Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #77591 next resume »»
CONTACT INFORMATION:
View contact information...

NAME OF COMPANY: SAIPEM S.A.
Address: Paris, France
Inclusive Date: July 10, 2008 - Present

POSITION: Sr. QA/QC ENGINEER (E&I)
PROJECT INVOLVEMENT:

Pearl GTL
PMC: JK (JGC-KBR Joint Venture)
Client: Shell
Ras Laffan, Qatar
July 2008 – Present

JOB DESCRIPTION:

* Review and approve Subcontractors Work Method Statements, Quality Procedures and Inspection and Test Plans.
* Lead the team of QC inspectors to ensure that project work meets the required specifications. Supervised the team to make sure that proper inspections are carried out, and required PMC representative are notified for witness/hold point inspections at site and relevant Request For Inspections (RFI) are completed as per the ITP. Raising punchlist if any deficiency is observed.
* Issues Non-Conformance Reports (NCR) on works that deviates standards, quality procedures and design specifications.
* Coordinate with client (PMC) and vendor representative for all technical related issues of project clearing all doubts/bottleneck by raising Technical Queries and expediting issuance of site instruction to close the issue and smooth flow of RFI without loss of time.
* Coordinate, monitor and control site QC activities including stage wise inspections of systems/sub-systems.
* Maintain all inspection records, check lists, data sheets for final handover of the system to Client.
* Ensure that construction activities meet the HSE requirements applicable at site.
* Ensure that Flawless Start-up Initiatives are carried-out from initial stage up to precommissioning stage.

NAME OF COMPANY: UTS KENT CO. LTD (KENTZ GROUP, Ireland)
Address: Abu Dhabi, U.A.E.
Inclusive Date: February 25, 2006 – June 6, 2008

POSITION: QA/QC ENGINEER (E & I)

PROJECT INVOLVEMENT:

I&CS Upgrade and Integration of Pneumatic Control Loops to DCS (OGD-0)
Client: Abu Dhabi Gas Industries Ltd. (GASCO)
Habshan, Abu Dhabi, U.A.E.
January 2008 – June 2008

Onshore Gas Development Phase III (OGD III) Construction Project
Main Contractor: Eastern Bechtel Co. Ltd.
Client: Abu Dhabi Gas Industries Ltd. (GASCO)
Habshan, Abu Dhabi, U.A.E.
May 2007 – December 2007

Control System Upgrade of GE Turbine-Compressors (Shutdown Works)
Client: Abu Dhabi Gas Industries Ltd. (GASCO)
Asab, Abu Dhabi, U.A.E.
January 2007 – April 2007

Excitation System Upgrade of GE Turbine-Generators (Shutdown Works)
Client: Takreer Ruwais Refinery
Ruwais, U.A.E.
November 2006 – January 2007

Taweelah Gas Receiving Facility Construction Project
Main Contractor: Al Jaber-Technip Consortium
Client: Dolphin Energy Ltd.
Taweelah, U.A.E.
May 2006 – November 2006

Boil Of Gas and Sulfur Recovery Unit Construction Project
Main Contractor: Chiyoda/Costain
Client: Abu Dhabi Gas Liquefaction Co. Ltd (ADGAS)
Das Island, U.A.E.
February 2006 – May 2006

JOB DESCRIPTION:

* Conducts inspection, surveillance, and monitoring of installation activities as per issued for construction (IFC) drawings, clients specifications and standards, and other internationally recognized standards.
* Prepares and submits Request For Inspection (RFI) on completed works to clients for their approval.
* Inspects installation of process instruments, impulse tubings, instrument air lines, JBs, DCS, RTU panels, power, control, and instrument cables, cable glanding and terminations, motors, transformers, variable speed drives, capacitor banks, HV & LV swicthgears, lighting systems, earthing systems, cathodic protection systems, etc.
* Witness standard tests conducted on new equipment such as transformers, switchgears, MCCs, grounding systems, motors, cable IR and Hipot tests, etc.
* Witness calibration activities for instruments such as PTs, FTs, PDTs, MOVs, TTs, etc.
* Maintains calibration records of instruments (such as transmitters, transducers, etc.)
* Issues Non-Conformance Reports (NCR) on works that deviates standards and design specifications.
* Prepares and maintains inspection and test reports, quality records and documents.
* Prepares redlined drawings.
* Facilitate clean-up of exception items/punchlist items.

NAME OF COMPANY: M.R. AL-KHATHLAN EST. FOR CONTRACTING
Address: Dammam, K.S.A.
Inclusive Date: August 10, 2002 – August 21, 2005

POSITION: PROJECT QA/QC Manager (Aug. 2004 – Aug. 2005)
QA/QC Electrical Inspector (Aug. 2002 – Aug. 2004)

PROJECT INVOLVEMENT:

Process Area Emergency Shutdown System and Marine Control System Replacement (BI-3038), Yanbu Refinery
PMC: SNC Lavalin
Client: Saudi Aramco
Yanbu, K.S.A.
Designation: Project QA/QC Manager
Saudi Aramco SAP No.: 70003595
August 2004 – August 2005

Control System Replacement (BI-3535), NGL Plant (Yanbu Gas Plant)
PMC: SNC Lavalin
Client: Saudi Aramco
Yanbu, K.S.A.
Designation: QA/QC Electrical Inspector
Saudi Aramco SAP No.: 70002842
November 2003 – August 2004

Control System Replacement (BI-3536), Yanbu Crude Oil Terminal (YCOT)
PMC: SNC Lavalin
Client: Saudi Aramco
Yanbu, K.S.A.
Designation: QA/QC Electrical Inspector
September 2003 – November 2003

Control System Replacement (BI-3536), Saudi Aramco East/West Pipeline
PMC: SNC Lavalin
Client: Saudi Aramco
Abquiq-Riyadh-Yanbu, K.S.A.
Designation: QA/QC Electrical Inspector
August 2002 – September 2003

JOB DESCRIPTION:

As Project QA/QC Manager
* Prepares Quality Plan, Work Instructions, Special Work Procedures, Inspection and Test Plans, monthly and weekly quality reports.
* Implements Quality Management System in the project as per Saudi Aramco Quality Schedule (Sched. Q) and ISO 9000 series.
* Monitors the quality activities of the project.
* Coordinates with the client representatives on matters involving quality assurance and control activities.
* Initiates and prepares site technical queries.
* Review the quality of materials in quotations prior to submission to client for approval.
* Review materials Inspection Assignment Packages (IAP).
* Maintains calibration records of instruments (such as transmitters, transducers, etc.)
* Maintains records of test results conducted on cables and equipment.
* Review and sign-off Instrument Installation Inspection Records.
* Review Instrument Loop Folders.
* Initiates and conducts quality process improvement activities.
* Maintains database of audit, corrective actions and matters relating to quality measures.
* Prepares Photostat and Inspection Record books after project's completion as per contract requirements.

As QA/QC Electrical Inspector
* Prepares Inspection and Test Plan (ITP), Work Instructions, and Special Work Procedures.
* Prepares 2-Week Inspection Look Ahead Schedules.
* Conduct site inspections and implements the approved Project Quality Plan, ITP, Work Instructions, Special Work Procedures, Saudi Aramco Standards, and other recognized international standards (e.g. NEC, NEMA, etc.).
* Conducts material receiving inspections.
* Prepares and submits Request For Inspection (RFI) on completed works to clients for their approval.
* Issues Non-Conformance Reports (NCR) on works that deviates standards and design specifications.
* Prepares daily quality reports, quality records and document.
* Witness standard tests conducted on electrical equipment such as Insulation Resistance, Contact Resistance, Over Current Trip Test for Circuit Breakers and Ground Fault Protection, low voltage Transformers winding Turns Ratio, Impedance, Polarization Index, etc.
* Inspects calibration of intruments such as transmitters, transducers, gauges, etc.
* Inspects installation of field instruments (e.g. Pressure Transmitters, Pressure Differential Transmitters, Flow Transmitters, Level Transmitters, etc.)
* Prepares Instrument Installation Inspection Records.
* Assists in preparation of Loop Folders.
* Witness instrument loop checks and function tests.
* Witness pre-commissioning works for UPS and Stationary Battery System, Battery Monitoring System, Equipment Smoke Detection System, DCS, ESD, and SCADA System.
* Prepares redlined drawings.
* Facilitate clean-up of exception items/punchlist items.
* Prepares partial/final Mechanical Completion Packages.

NAME OF COMPANY: AL-SAIGH TRADING AND CONTRACTING
Address: Buraidah, Al-Qassim, K.S.A.
Inclusive Date: June 28, 2000 – April 15, 2002

POSITION: PLANT ELECTRICAL ENGINEER

PROJECT INVOLVEMENT:

Operation and Maintenance of
Water Treatment Plant and Tower
Ministry of Water
Buraidah, Al-Qassim, K.S.A.
June 2000 – April 2002

JOB DESCRIPTION:

* Prepares Plant Electrical Maintenance Schedules.
* Identifies actual potential problems and deficiency situations and provide prompt solutions.
* Conduct electrical inspections on sub-contractors activities as per their approved Contract's Scope of Works and Specifications.
* Review materials quotations.
* Prepares maintenance report and the likes.

NAME OF COMPANY: FORMOSA PETROCHEMICAL CORPORATION (FPCC)
Address: Mailiao, Yunlin, Taiwan, R.O.C.
Inclusive Date: May 7, 1999 – May 6, 2000

POSITION: ELECTRICAL INSPECTOR

PROJECT INVOLVEMENT:

* Crude Oil Refinery Construction
Formosa Petrochemical Corporation
Mailiao, Yunlin, Taiwan, R.O.C.
May 1999 – May 2000

JOB DESCRIPTION:

* Performs 'Hold', 'Witness' and 'Surveillance' inspections and tests on contractors' construction activities.
* Inspect materials and equipment as applicable to ensure compliance with FPCC specification requirements for proper handling, storage and protection at warehouses and/or construction sites.
* Monitor Contractors' Quality System, records and Quality Personnel for compliance with requirements.
* Review and evaluate Contractor's Quality document submittals.
* Witness on-site and offsite material, equipment, and installation test for compliance with standards and approved procedures.
* Record legibly and accurately all controversial and non-complying construction practices, materials and equipment and report to supervisor detailed potential problems for early resolution.
* Write inspection reports and initiates Non Conformance Reports (NCRs), Worksheets, and Equipment Deficiency Reports (EDRs) as needed.
* Assist in the training of Maintenance Personnel for operation of electrical equipment to be handed-over.

NAME OF COMPANY: GLOBAL TECHNOLOGY SYSTEMS PHILS., INC.
Address: Pasig City, Metro Manila, Philippines
Inclusive Date: September 7, 1997 – May 6, 1999

POSITION: PROJECT ENGINEER

COMPANY DESCRIPTION:

Global Technology Systems Phils., Inc (GTSPI) is a construction company which handles mechanical & electrical projects ranging from Building construction to Industrial plants. GTSPI is also supplier of Groupe Schneider products such as Circuit Breakers, Contactors, Variable Speed Drives, etc.

PROJECT INVOLVEMENT:

* Construction of
Sulfuric Acid Plant with Co-generated 16MW Power Plant
Main Contractor: Monsanto Environchem Co.
Client: Philippine Phosphate Fertilizer Corporation
Leyte, Philippines
September 1997 – May 1999

JOB DESCRIPTION:

* Responsible for examining bid documents, plan specifications and procedures to be performed on the project.
* Perform job costing, planning, documentation, and evaluates change orders and billings.
* Supervise electrical installation works as per Project's scope of work and specifications.
* Review redlined and as-built drawings.
* Prepares progress reports.

NAME OF COMPANY: HI-ELES INDUSTRIAL CORPORATION
(HITACHI Elevators and Escalators)
Address: 1351 Angono St., Makati City, Philippines
Inclusive Date: August 7, 1995 – July 21, 1997

POSITION: INSTALLER

PROJECT INVOLVEMENT:

Installation of Elevators and Escalators for the following projects:
EDSA Shangri-La Hotel (Makati, Phils.)
South Center Tower (Alabang, Phils.)
Asian Plaza 2 (Makati, Phils.)
Prince David Condominium (Manila, Phils.)
Vernida 1 Bldg, (Makati, Phils.)

Maintenance of Elevators and Escalators at the following areas:
Makati City Area (189 Elevators, 20 Escalators, and 2 Moving walks)
Manila City Area (86 Elevators and 13 Escalators)

JOB DESCRIPTION:

* Responsible for proper installation of power and control system of elevators and escalators.
* Conducts testing and commissioning of elevators and escalators.
* Adjusting and setting elevator and escalator parts and devices for normal operation.
* Conduct repairs and replacements of defective and damaged parts and devices.
* Prepares installation and maintenance reports.

NAME OF COMPANY WIREWAYS Engineering
Address 1125 Metrica St., Sampaloc, Manila, Philippines
Inclusive Date June 1, 1993 – July 31, 1995

Position ELECTRICAL ENGINEER

PROJECT INVOLVEMENT:

Construction of Sulfuric Acid Plant
Client: Chemphil LMG
Pasig City, Philippines
April 1994 – July 1995

Construction of Flour Mill
Client: Philippine Foremost Corporation
Iloilo City, Philippines
June 1993 – April 1994

JOB DESCRIPTION:

* Responsible for examining bid documents, plan specifications and procedures to be performed on the project.
* Perform job costing, planning, documentation, and evaluates change orders and billings.
* Supervise electrical installation works as per Project's scope of work.
* Prepares daily activity report.
* Prepares redlined and as-built drawings.

TRAININGS AND SEMINARS

1. Internal Quality Management System (QMS) Auditor Training Course
SGS Inspection Services
Dammam, K.S.A.
Certificate #: SGS/SSCE/IQMSA/505830/P/12489
January 4-5, 2005

2. ISO 9000:2000 Series Foundation Training Course
SGS Inspection Services
Dammam, K.S.A.
Certificate #: SGS/SSCE/QMSFTC/505829/P/1802
January 3, 2005

3. Computer Aided Construction Project Management (CPM)
CADVision Engineering Technologies
Manila, Philippines
May 21, 2000 – June 25, 2000

4. Computer Aided Drafting and Design (CADD)
CADVision Engineering Technologies
Manila, Phils.
Nov. 1998 – Jan. 1999

5. Safety of Life At Sea (SOLAS)
* Survival Craft Handling
* Personal Survival Technique
* Fire Fighting and Fire Prevention
* First Aid at Sea
Philippine Seafarers Training Center
Manila, Philippines
Feb. 6-20, 1995

COMPUTER APPLICATIONS
1. MS Office
2. AutoCAD
3. Microstation
4. Primavera Project Planner

EDUCATIONAL ATTAINMENT
COLLEGE: CENTRAL PHILIPPINE UNIVERSITY
Bachelor of Science in Electrical Engineering
Jaro, Iloilo City, Philippines
1993

LICENSES:
1. Board Passer: Philippine Registered Electrical Engineering Licensure Exam., April 1994
License No. 0017647, Feb. 1995
2. Board Passer: Philippine Registered Master Electrician Licensure Exam., October 1993
License No. 0016327, Nov. 1994

View contact information...
«« previous resume next resume »»
Search Results (Resumes 651 to 700 of 7051)Go to Search Parameters...
Brief Description
This is Esmaeil Rezaei from Iran and I have 37 Years old. I was graduated form Shiraz University with M.S. degree in chemical engineering. I have 12 years experience in petrochemical company in Shiraz city.
Subject: Application for the Post of Geologist
Experience in commissioning 5MW wartsila diesel engines, underwater mountable Thrusters, marine systems, meeting with owner and class surveyor, technical management of ships, operation and maintenance of marine systems
An Instrument & Electrical Inspector/Supervisor with 15 years of extensive experience in the field of Inspection, Engineering, Construction, Hook-up, Commissioning and Certification of various kinds of Plants such as Petrochemical Plant, Desalination Power Plant, Sewage Water Treatment Plant, Oil &
I am a graduate Mechanical Engineer with over 20 years Oil & Gas Refining industry experience, out of which about 10 years at a AMOCO fuels and lube refinery at India. I am currently working as the Mechanical Design Engineer for a prestigious mega refinery project (world¡¦s largest grassroots refine
senior geologist
A qualified engineer with over 16 years of experience in production
"Rotating Equipment Engineering Specialist" with 17 years experience in refinery, gas plants, LNG plants and petrochemical plants for rotating equipment maintenance support, diagnostics, troubleshooting, reliability improvement and repair.
EM/MWD/LWD Gamma
I was assigned as Production Technologist for PETRONAS. My assignment mainly in Field Development Project whereby my job scopes are focusing on well &tubing design i.e. well completion design, artificial lift screening/selection & design, Sand prediction & sand control selection,
I am Expert on Reservoir Engineer, my capabiliity can cover whole petroleum engineering
Over ten years of experience in the design, troubleshooting, maintenance and optimisation of new and existing facilities including sweet and sour natural gas plants, oil batteries, water injection, water treatment and chemical plants.
This letter is to express my interest for a Senior position in oil & gas Exploration. Based on my skills in Geology and oil and gas Exploration and New Ventures, Experienced Geoscientist, Explorationist and new ventures activities; PhD graduated In Geology (1991), bachelor (structural geology).
Electrician - Canadian journeymen , Instrument Technician - Canadian certification,10 years Supervisory, Startup and commissioning expert. Offshore FPU FSO. PLC Expert/ DCS, Experenced Trainer. High Voltage, protection relay testing, Valve repair, Work exp. in Canada, Libya. Indonesia.
I have over 32 years in the Coatings industry, 22 years as a Coatings Inspector (British Gas/CSWIP BG57012), with 14 years as a Coatings Advisor to ExxonMobil Nigeria. My duties For Exxonmobile included Inspection of all onshore and offshore facilities also new construction projects. Other duties in
Senior Piping Designer
25+ years experience in piping design of power plant,refinery, and chemical plant exoeriences. Field experience included.
QA/QC NDT and RT Interpreter Coordinator 5 Years QA/QC Welding and Fabricating Inspector Lev 2 8 Years Welding Instructor /Team Leader 3 Years Supervisor/ Superintendent / Piping-Mechanical-Structural 7 years
Electrical Design, Drafting, Construction and Procurement
Autocad, microstation, frameworks 2-d and 3-d cad structural designer
Quantity Surveyor - Estimator for Oil and Gas, Petrochemical, Hydro Power Plant, Fabrication Shop, 24 yrs. exp.
Sr.PDS/PDMS Piping Design Engineer/Designer / PDS Administrator /Lead piping Engineer/Designer.
A Mechanical Engineer with 20 + years of experience in O&M of large Diesel engines and various machineries in power plant and marine industry
Project / Engineering of facilities for the domestic and international oil and gas industry with emphasis on Structural and Foundation Engineering. Strong knowledge of processing, and construction of platforms, pipelines, platform drilling /workover rigs, etc.
Fifteen years of experience in Refinery, Oil & Gas and Petrochemicals field as a Piping designer in producing plot plans, Equipment Layout, Piping General Arrangement Dwgs, Piping isometrics, Jacketed piping isometrics, M.T.O., Stress isometrics, Sketches, Nozzle orientation and as-built Drawing on
chemical engineer in pakistan steel mills
I am an IRCA (UK) Registered QMS 2000 Lead Auditor, currently working QA/QC Manager with an EPC Company for Yemen LNG Project, Balhaf site, Yemen.
Petroleum Engineer with extensive experience in Drilling, Operations, Drilling Management. Trained in: Offshore, Onshore, Inland-waters. HTHP wells, Gas wells, Horizontal drilling.
Engineering professional with 17+ years of experience within diverse oil, gas field, refinery and petrochemical industrial arenas. Expert level engineer for instrumentation and control disciplines.
Reliability / Maintenance / Rotating Equipment Engineer with 20+ years of experience in Oil / Gas / Petrochemical / Utility industries.
Over 13 years of solid experience in piping stress/pds design for Refineries,petrochemicals,fpso&power projects.
Saudi Aramco Approved Vendor Inspector SAP No. 70004827, Certified API-510, Cswip 3.1, NDT Level2, ISO 9001.
13 years oil industry experience,• Drill wells up to 6500 mt, High temperature gas wells, drilling of horizontal multi-lateral hole, sidetracks, H2S Environment,Run 5 1/2" expandable liner & Run 4 1/2" completion assy., with 4 1/2" liner cemented off bottom
Mechanical engineer graduated in 1991 from Damascus university (machinery department)since that date (15 years experience in oil and gas industry in onshore and offshore)I have been in several companies(SPC,SCOT,Alfurat petroleum co with SHELL in their gas plant.
20 years experience in process and laboratory analyzers in refinery and Petrochemicals operations world wide. Graduate degree in analytical chemistry. Willing to relocate.
Sr. Civil Structural Designer
Working as Well Site Geologist for Oil Field Instrumentation, India. Our client is MEDCO international an Indonesian company. Presently I am working in Oman. I have worked in the following fields of Oman: Simsim, Warad, Basma and Irad.
CAREER SUMMARY : Vast experience in the field of industrial piping, i.e. petrochemicals, fertilizer, synthetic fiber, refinery, polyester and pharmaceuticals industries. Main responsibilities includes - model review, piping designing, supports, drawings checking, site survey and coordination.
My career objectives, strengths and experience in the workforce I am a skilled, experienced and respected heavy equipment mechanic with substantial experience onshore & offshore Australia and overseas particularly here in Asia.
Able to make piping design from conceptual to detail design and field engineering work( see career summary on my resume)
CATIA V5 (1600 Hours), Kaizen/Kanban - Continuous Production Improvement, Lean Manufacturing/Six Sigma, Microsoft Office Systems
QA/QC Engineer-International projects-Oil&gas industry
I have 14.5 years of experience in the field of instrumentation/control system engineering for Oil/Gas industry. I have served with Reliance Industries Limited (A Indian largest Oil/Gas/Petrochemical Company ) & and SABIC (A Saudi Arabia largest Oil/Gas/Petrochemical Company).
More than 15 years of comprehensive knowledge and experience in the field of electrical and instrumentation engineering. Over 12 years of involvement in inspection and construction of Oil & Gas, Petrochemical, and Utilities Plants. Have good knowledge in implementation of SHELL DEP (Design and Engin
Analyst/Technical Assistance for reservoir/production operations
Vast experience in Well and Reservoir Surveillance, Integrated Reservoir Studies, Integrated Production Systems Modeling, Well Optimization Production Engineering and Hydrocarbon Accounting. Proven record of accomplishments in deepwater production operations in the U.S. and West Africa
Electrical Engineer
Twenty-Eight(28) years of progressive experience in Piping Design with function relevant to all aspects of Font End Engineering and Design, Plant Layouts, Piping Layouts, Isometrics, Material Take Off, Stress Analysis, Procurement and Preparation of Specifications, Plant Modifications, etc.
Over 13 years piping stress and mechanical engineering experience with EPC companies in Sinopec, China, Fluor Canada and Jacobs Canada
Having substantial knowledge and experience (14 years) in Piping/Mechanical engineering, especially in the Piping Engineering and Design. Involved in industrial plant, petrochemical. Expert in PDMS, including Design, Draft, Isodraft and ability to design and drafting Pipe support using MDS
First   1   2   3   4   5   6   7   8   9   10   11   12   13   [ 14 ]   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com