Resume - More than 20 years experienced in project design services which involved mechani...

Misco Jobs

Resume #77640

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE
May 1989 to Present
Employer: Saudi Consulting Services, KSA
Position: Principal Engineer (Mech'l. / Piping)
Duties & Responsibilities:
Developed FEED (Front-End Eng'g Design), conceptual design and preparation of detailed design packages for various projects and upgrading of plant facilities in Saudi Aramco Ras Tanura Refinery, Ras Tanura Terminal Tankfarm, Juaymah Offshore Terminal, Yanbu NGL Plant and Crude Oil Tankfarm. Work involved revision of existing P&ID's, Line Designation Tables, preparation of new piping plans, isometric piping details, material take-off, hydrostatic test diagrams, hydraulic calculations, hot tap/stopple & reinforcement pad calculations. Design of piping system for flexibility using CAESAR II program for pipe stress analysis. Developed equipment specification (pumps, steam turbines, tanks, pressure vessels, heat exchangers, fin fan coolers, etc.) in accordance with ASME / API standards. Technical evaluation of vendor offered equipment as compared with the purchase order specification and data sheets. QA/QC review to ensure compliance with the scope of work and ASME / API Standards. Coordination with other disciplines (civil / structural, electrical and instrumentation). Attended a training course for Internal Quality Auditors (ISO 9000) in Sept.1997 conducted by NITTCO, FAHSS/TUV and IQM-Middle East. PMC during the construction of additional 300 Tons/Day Sulfur Forming Unit Project in Samref, Yanbu, KSA.

Nov. 1987 to July 1988
Employer: Nesma Costain Process Co. Ltd., KSA
Position: Mechanical Draftsman
Duties & Responsibilities:
Engineering services contract with Yanbu Petrochemical Company (YANPET). Work involved preparation of piping plans, elevations (on piperacks, above ground and underground), isometric piping details and material take-off as per approved P&ID's for the Yanpet Project 85-141 (Methane Ballast Vaporization and Acetylene Conversion).

Oct. 1979 to Jan 1986
Employer: Saudi Aramco, KSA
Position: Engineer II
Duties & Responsibilities:
Preparation of project design scope for engineering service order on various projects in Ras Tanura Refinery. Carry out constructability review of project design packages submitted by Design Consultants. Oversee and monitor progress of project construction being done by Construction Contracting Companies. Selection of alternative materials for non-stock items specified in MTO. Technical evaluation of vendor offered equipment as compared with the purchase order specification and data sheets. Coordination with other engineering disciplines (civil / structural, electrical and instrumentation).

June 1977 to Sept. 1979
Employer: Parsons International Ltd., Philippines
Position: Sr. Mechanical Engineer
Duties & Responsibilities:
Participated in the engineering design for the 110-MW Bulalo Geothermal Gathering System. Work involved the design of wellhead piping, satellite station piping, plant station piping system and the cross-country two-phase flow pipelines. Work included provision of expansion loops, directional anchors, pipe supports and guides, thermal insulation and cladding. Calculations for piping flexibility using standard tables and charts to ensure that the piping does not become overstressed.

June 1976 to June 1977
Employer: San Miguel Corporation, Philippines
Position: Engineer/Draftsman
Duties & Responsibilities:
Participated in the engineering design for the 3200-MT Malleable Cast Iron Pipe Fittings Plant. Preparation of utility piping plans for the Malleable Cast Iron Pipe Fittings Plant. Work involved layout of raw water piping, plant air piping and firewater piping. Layout of machineries and associated equipment in the foundry section, moulding & sand preparation section, annealing and machining section.

Oct. 1972 to Dec.1975
Employer: Marinduque Mining & Industrial Corp., Philippines
Position: Junior Engineer
Duties & Responsibilities:
Inspection and monitoring of cross-country pipeline installation (30" dia. x 25 km water transmission mains) from dam site pumping station to 5M-gallon Plant reservoir. Inspection and monitoring of Sabang Concrete Gravity Dam construction including the 3-800 Hp peerless vertical turbine pumps, 7.5-Ton overhead bridge crane, tank farm transfer pumps and piping installation to ensure that these are done according to the design drawings, ANSI / ASME codes and AWS specification. Design and modification of process piping system according to the requirements of engineering service orders.

May 1969 to Sept 1972
Employer: Paper Industries Corp. of the Philippines
Position: Draftsman
Duties & Responsibilities:
Piping layout of steam lines, process lines and utility lines interconnecting the 50-MW Power Plant, Refiner Groundwood Mill, Kraft Pulp Mill, Paper Mill, Electrolytic & Recausticizing Plant. Layout of the 26" dia. X 10 km water pipeline from Bagnan reservoir thru settling basin / pumping station to plant reservoir.

Feb. 1968 to Feb. 1969
Employer: Atlas Consolidated Mining & Dev. Company, Philippines
Position: Installation Mechanic
Duties & Responsibilities:
Participated in the construction of the 15-MW Sangi Power Plant Expansion Project. Work involved installation of piping system for steam, condensate and condenser cooling water under the Turbine area. Installation of structural supports for the belt conveyor to loading platform for shipping copper concentrates at Sangi pier.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 6999)

Go to Search Parameters...

Brief Description

I have Fifteen (15) years of professional and technical engineering experiences in my field of expertise. Strong civil, structural and geotechnical engineering, analysis, design and calculation skills in vertical and horizontal projects such as petrochemicals, industrial, institutional

A production/well completion engineer with over 20 years experience in Canada and overseas

I have Very good Experience in the Petrophysical Operation, Studies and Well reservoir Survillance. Have experience in QC/QA of integrated studies. Have leadership experience

Geoscientist

Honor degree in Mechanical Engineering form UK and have gained more than twenty five years experience in the fields of major sub-sea assets management, assets integrity, offshore operations, projects and contracts management, inspection, maintenance and marine related projects.

Multi skilled engineer, Technical Advisor, Mud Engineer

15 years Mechanical Engineer within Oil / Gas & refinery industry, inclusive 5 years maintenance experience; 5 years for nuclear power project; P.Eng of APEGGA, Canada

Can perform both technical work and sales work involving oil/gas industry more specifically as an advisor, planner, support or salesperson.

Drilling Engineer – DCWO planning, programming, engineering, operations evaluation, performance analysis; deep HPHT gas wells, high deviated, ERD and horizontal oil wells, sidetrack wells; land operations; harsh desert (Middle Asia) and arctic (Siberia) environment; English-Russian-Slovak

Senior Mechanical Engineer experienced in detailed mechanical / thermal / process and E&I design of Fired Heaters, Reaction Furnaces, Reformers, SCR’s WHRU’s, Boilers, Incinerators, Flares and associated ancillary equipment. Very strong E&I, DCS / PLC & BMS skills.

By working 17 years in the field of petrochemical field, I experienced all kinds of key projects like FCCU, Hydro-cracking unit, Hydro-treating unit and have expert ability to do piping static and dynamic stress analysis. Also I have five years working experience as a mechanical engineer in refinery

35 years of experience in the process industry working for engineering firms, equipment manufacturers, chemical company

Conducting a piping training program from zero skill up to a skill trainees supervising the assigned work from planning, organizing, leading and controlling. Performed piping work activities from designing and drawing the piping tie-in to existing pipelines, drawing various structural platform

Twenty years of professional experience in, design, consultancy, construction and maintenance, covering a broad range.

25 years of experience in construction, installation, commissioning, testing and maintenance of Electrical, Electronics and Instrumentation equipments and controls in Petrochemical Industry

Have more than 20 years experience in Piping Design and Engineering including Stress Analysis and Piping Materials Control for various projects in petrochemical plants, refineries and commercial chemical plants. Presently working in Worley Parsons (Colt Engineering Corporation), Calgary, Canada

Overview: Thirty (30) years of engineering management experience, 25 years of which were in the oil, gas and shipping industry and EPC projects that include the following: Project management, conceptual, feasibility studies, detailed design engineering, procurement, constr. and commissioning

Over 18 years experience in 2D and 3D seismic data processing. Processing land desert and mountain data. Processing experience gained in Geofizyka Krakow Ltd, WesternGeco and CGGVeritas. User knowledge of Unix, Linux , excellent Omega SPS and Tango, basic ProMAX. Good MS Office skills.

Advanced Process Controls, RealTime Process Information Systems, LIMS

PROJECT MANAGEMENT, CORROSION & MATERIALS,INSPECTION & INTEGRITY ENGINEER/MANAGER

More than eighteen years of experience in premium International Oil and Gas Engineering Consultancy Companies within the field of Process Safety, Technical Safety and Loss Prevention.

well services, production technology, safety, beam pump

Licensed Professional Engineer, performance oriented, with extensive broad-based experience in multidisciplinary projects. Particular expertise in Instrumentation and Control Systems Engineering for Chemical and Oil & Gas Industries. Supervision of complex detailed Engineering and Procurement.

Reservoir Geologist  To perform characterization Reservoir integrated Studies and reservoir Modeling. Generation and evaluation Geological Prospects and development opportunities. Elaborate Exploitation Plans. Planning (targets) and monitor of Special Wells. Volumetric reserve estimations.

Primavera, MS Project, MS Office, EVMS, Planning

Versatile technology professional with expertise as a Senior Reservoir Engineer and Operations Business Manager. Resourceful problem solver who performs well under pressure. Outstanding leadership, organizational, and communication skills. Granted Top Secret Security Clearance. Analytical.

More than 13 years of multi-international reservoir engineering experiences in gas and oil developments from sandstone and carbonate in land fields and offshore,including different stages of appraisal and development planning & management, well test, reservoir characterization & simulation, economic

SmartPlant 3D/P&ID Application support

I wish to apply for suitable position in the highly motivated & challenging environment. I am having 21 year of experience in different fields of Gas, Petroleum and Chemical industries. Also involved actively involved as an engineering material coordinator. I am having experience in identifying

More than 20 years experienced in project design services which involved mechanical and piping design preparation of conceptual design packages and detailed design packages, specification of pipes, fittings, valves and other specialties. Developed specifications for pumps, steam turbines, tanks, pre

A total of 15 years of professional work experience, (9) years in the Gulf region, of which seven years Were in the oil/gas, petrochemical, power/desalination plant and building construction projects. A Computer literate and proficient in oral and writing English communication skills.

Geophysicist position in a oil-field services company. I have more than 18 years of seismic data processing and data management experiences.

Welding Inspector, CSWIP 3.2, ASNT-II Certified, 18 Years working experience in Oil and Gas Industries in various countries.

Has 20 Years Expeierence in various aspect of Control and Automation and last 7 years in Middle East with ABB /Invensys. Has done large projects and several latest DCS/ESD systems such as Triconex,ABB infi90 , Foxboro I/A , Honeywell TDC3000 etc

I am qualified Degree chemical Engineer from the reputed Maharaja Sayaji Rao Uni, Vadodara

I’ve total of Eighteen (18) years experience in the area of Pipeline design and Piping design for oil & gas and petrochemical projects.

Over 30 years and broad range of experience in oil and gas exploration. Bachelor degree Geophysics/ Geology and MSc degree in Geophysics. Worked in most aspects of exploration, such as seismic survey planning, acquisition, data processing, interpretation, AVO, seismic attributesand seismic inversion

Expertise in gas sweetening, gas compression, gasification process, and U&O facilities.

Over 16 years experience as Electrical Engineer

I have been a Process Engineer for 16 years. My experience includes process design of oil, gas and petrochemical plants and steam and power generation units, expertise in conceptual design, basic design, FEED and detailed engineering, experienced also in optimization and troubleshooting projects.

Over 20 years experience in chemical, petrochemical and oil&gas industry.

Have about 25 years of experience in logging operations (Open hole, Cased hole and Production Logging Services) and interpretation of well logs (Open hole, cased hole and Production Logging)

To provide technical expertise of piping, mechanical engineering for Oil & Gas, Petrochemical, Power plant. Support to projects management, Supply division and projects controls through all phases of major and minor projects

Process Design Engineer with experience o fEPC contracts in Saudi Arabia. I also have expereince in operating plants, providing plant support. I am currently working as Technical Manager of 20 process engineers, doing small projects execution for Sasol Infrachem Utilities.

Seismic interpreter and reservoir geophyscist with experience in reservoir modeling, geostatistics and rock physics

An experienced Control & Instrumentation Engineer with extensive achievements in leading, designing, executing, and organizing project activities for process industries, e.g. oil/gas refineries, chemical/petrochemical complexes, Power plants, steel and copper industries.

Accomplished PLC, HMI, automation, programmable controls specialist

A Production Engineer with over 25 years of oil and gas field experience in domestic and international operations. Solid record in building project teams in multidiscipline and multilingual work groups. Strengths include planning, organization, and communication.

15 years of experience in PDP/FEED/Detailed Engineering and Construction support in Petrochemical/Chemical industry. Extensive experience with Pressure Vessels (ASME Boiler and Pressure Vessel Code: Sec. VIII, Div. 1/2), Piping (B31.1/31.3), Above Ground Storage Tanks (API 620/API 650)

Chemical process/project engineer, small projects manager

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out