Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #77953 next resume »»
CONTACT INFORMATION:
View contact information...

REGISTERED MECHANICHAL ENGINEER
CERTIFIED CSWIP 3.1 WELDING INSPECTOR
SUMMARY OF WORKING EXPERIENCE

Three & half ( 3 1/2 ) years working in Production Solution & Well Testing Company as QA/QC Engineer, Quality Assurance Specialist respectively in POWER WELL SERVICES (now EXPRO) in Jakarta Indonesia, Tangguh Shore Base Papua Indonesia, Batam Indonesia, Doha,Qatar & Al-Khobar Saudi Arabia.

Thirteen (13) years combination experience as QA/QC Engineer, QA/QC Supervisor & QA/QC Inspector in an institution that was engaged on construction of oil & gas plant such as:
a)Three & half years in Power Well Services ( Now EXPRO)
b)Three (3) years in Kellogg Brown & Root / JGC in Algeria.
c)One (1) year in Kellogg Brown in Root / Technip in Doha, Qatar.
d)Six months in Gamma Al-Moushegah under the supervision of Alstom Power in Jeddah, KSA.
e)One & a half (1 ½) year working in Brown & Root International in TFT, Algeria.
f)One & a half (1 ½) year working in Mohammad Al-Mojil Group in Saudi Arabia.
g)Six years (6) years working in Atlantic Pacific Gulf in the Philippines.

At present I am connected to PT.EXPRO Company in Indonesia.

CERTIFICATIONS:

I was certified as a CWSIP 3.1 Welding Inspector by TWI Certification Ltd Group Company, England & given a license number of 3108202.
Also I passed the Mechanical Board Examination of Professional Regulation Commission of the Philippines as Registered Mechanical Engineer on February 1994 with license number 0047136.

SKILLS:

High technical knowledge of construction quality control relating to single or multidiscipline construction quality control activities; knowledge of an engineering discipline and construction activities in relation to an assigned area of responsibility; well-versed in computer; and AUTO CAD & Knowledge in inspection in well testing equipment. Well versed in different code & standards such as AWS, ASME & API.

CAREER PROFILE:

September 2005 – Present QA SPECIALIST / QA/QC ENGINEER
Power Well Services (Now EXPRO)

September 2002 – August 2005 QA / QC SUPERVISOR / QA/QC INSPECTOR
Kellogg Brown & Root / JGC

May 2001 – April 2002 QA/QC MECHANICAL INSPECTOR
Kellogg Brown & Root / Technip

September 2000 - February 2001 QA/QC ENGINEER / MECHANICAL INSPECTOR
Gamma Al-Moushegah Arabia Ltd.

October 1997 – March 1999 QA/QC ENGINEER / INSPECTOR
Brown & Root International

March 1996 – September 1997 QA/QC INSPECTOR
Mohammad Al-Mojil Group

January 1990 – March 1996 QA/QC ENGINEER / INSPECTOR
Atlantic Gulf Pacific

TRAINING & SEMINARS:

CSWIP 3.1 Welding Inspector
August 20-27, 2007
Makati, City Philippines

Forklift Operator
March 15 2006 Doha, Qatar
Conducted by First Safety Solution W.L.L

First Aid training
March 2006 Doha, Qatar
Conducted by First Safety Solution W.L.L.

ASNT-TC-1A Film Interpretation LEVEL II
April 6 – April 20 2005 In-Amenas, Algeria
Conducted by KBR Corporate Level III.

Auto Cad Release 14 Level-1 & 2
June – August 2000 Batangas City, Philippines
Conducted by ABCC Philippines, Inc.

Non – Destructive Testing, " Technological Necessity in the Next
Millennium " 14th Annual Convention and General membership Conducted by
Philippine Society for Non -Destructive Testing
November 19, 1999
Holiday Inn Resort, Clark Field, Pampanga, Philippines

National Training Course on Non-Destructive Testing in Radiography – LEVEL II
June 14-30, 1999
Diliman, Quezon City, Philippines
Conducted by Philippine Nuclear Research Institute (PNRI)

Quality Control Training for ISO 9001
March 1996 Dammam, Kingdom of Saudi Arabia
Conducted by Mohammad Al-Mojil Group, KSA

Visual Welding Examination
March 1996 Dammam, Kingdom of Saudi Arabia
Conducted by Mohammad Al-Mojil Group, KSA

Non-Destructive Testing – BHFY Visual Testing Level II
October 18-19, 1994 Batangas, Philippines
Conducted by SGS Philippines at AG & P

Basic Refinery Process Course – CDU, Batangas Refinery Operators Development Program
April – September 1993 Batangas City, Philippines
Conducted by Caltex Philippines

Quality Assurance / Quality Control Inspector
January - March 1990 Bauan, Batangas, Philippines
Conducted by AG & P, Philippines

Basic Pneumatics and Instrumentation
August 1990 Batangas City, Philippines
Conducted by SMC Pneumatics

PROJECTS:

British Petroleum Tangguh, Rubicon Vantage & Intrepid FPSO Topsides, Noble Chuck Syring (NCS), Ocean Heritage (OH), Panon, Total, In-Amenas Project, In-Salah Gas, Qatar Chemicals, 3x365 Shoiba Steam Power Plant, TFT Gas Development, RTRUP Refinery, MTBE Plant, Honkong Conventional Exhibition center, NPC Calaca 1 & 2, Pagbilao Power station, 570m3/hr desalination, NPC Combine cycle Power Plant, Gas Compression Modules, 8 Unit Asahi Settler, Semi-conductor Manufacturing Plant, Cooling of water pipe intake System & 7.5MW NPC Power Barge.

CLIENT:

British Petroleum, Rubicon, Conoco Philips, Oxy, Sonatrach, BP, Chevron Philips & Q-chem., Sceco, Total, Repsol, Saudi Aramco, Sadaf, Cleveland Structural Engineering, MHI, Mitsui Engineering & Shipping Co., KHI, Tokyo Kyuie Co. Ltd., Flour Daniel, Sumitomo Heavy Industries, Gateway Electronics Corporation, National power Corporation.

WORK LOCATION:

Jakarta Indonesia,Tangguh Shore Base Papau Indonesia, Batam Indonesia, Alkhobar Saudi Arabia,Doha,Qatar, In-Amenas Algeria, In-Salah Algeria, Tin Fouye Algeria, Umm Said Doha Qatar, Jeddah KSA, Jubail KSA, Rastanura KSA & Philippines

RESPONSIBILITIES:
(QA SPECIALIST) ----- June 2008 to present
* Reviewed manufacturing data report (MDR) including modification of all equipment & find out what were the missing documents on each data books.
* Reviewed / verified all certificates like pressure testing, NDT report, lifting sling & shackles, functional test of each equipment were in place & make sure it is up to date.
* Reviewed / verified NDT technician qualification before doing inspection of equipment.
* Witnessed Well Test equipment certification like MPI, wall thickness, hydrotesting, lifting sling & all kind of testing to be done on equipment.
* Provide Job Safety Analysis (JSA) & Risk assessment before performing the job.
* Checked material safety data sheet (MSDS) are in place in each corresponding chemicals.
* Checked / monitored the maintenance of each equipment in well testing & wire line are done by operator or maintenance personnel & confirm that the job card were complete as well.
* Provide checklist to well testing & wire line equipment as per equipment requirements.
* Witness pressure testing of pressurize equipment prior for shipment to job location.
* Reviewed & verified calibration status of pressure gage & pressure recorder to be used.
* Witnessed wall thickness, magnetic particle inspection, penetrant testing & load testing all static & rotating equipment by Third Party Inspection Company.
* Witnessed function test of chemical injection pumps, transfer pumps, steam generator, air compressor & burner on burner booms.
* Assessment of all well testing equipment condition & making recommendation to maintenance & operation based on evaluation.
* Gathered certificate to Third Party Company, operator & compile it to corresponding equipment
* Gave a helping hand to maintenance group on rigging up & rigging down when they were shortage of personnel.
* Encode & update all re-certification on the data base to monitor easily its expiration dates.

RESPONSIBILITIES:
(QA/QC ENGINEER) ------- February 2007 to May 2008
* Reviewed / approved Inspection Test Plan, WPS / PQR procedure, Welders Qualification Certificate, NDE procedure, Hydrostatic procedure, Blasting & painting procedure of different subcontractors to be used on Rubicon Intrepid & Vantage Floating Production Storage & Offloading (FPSO) Topside project.
* Reviewed fabrication drawing of structural skid, vessel, tanks & piping.
* Review & implement procedure requirements of the project.
* Supervise to all rentals QA/QC inspectors for all jobs to be done.
* Assisted to third party (DNV) for all quality matters.
* Inspection & monitor on-going fabrication job for structural, vessel, tanks & piping.
* Inspections of welding, dimensional, Non Destructive Examination (NDE) & painting.
* Internal inspection stationary equipment such as tanks, separators, heaters, water degasser vessel & deoiler cyclone vessel.
* Witness tube expansion of heaters & hydro testing of shell & tubes.
* Witness pressure testing of all static equipment & piping.
* Witness performance test of pump on the factory based before sending it on location.
* Witness load testing of main process deck including all the equipment.
* Witness pressure safety valve pneumatic prior to installation.
* Audit the sub-contractor & make sure that they were follow the project specification & requirements.
* Provide as-built drawing to isometric drawing & P&ID when project engineer is on leave or not available.
* System line checking of piping to make sure every pieces or material were installed as per drawing.
* Raise Non-Conformance Report.
* Checked & signed all manufacturing data report (MDR) done by the subcontractor.
* Distribute the manufacturing data report (MDR) including the electronic copy of each data book to client & third party.

RESPONSIBILITIES:
(QA SPECIALIST) ----- September 2005 to February 2007
* Monitor & update certification & re-certification of all static equipment such as meter tanks, separators, burner booms, heaters, test tree, flow head, heat exchangers, choke manifold, sand filters, coflex hose, pipe spools, pipe rack, propane rack, basket container, laboratory container, flame arrestor, data heaters, diverter manifold, air manifold, lifting equipment such as sling, turn buckles, shackles, padeyes of all well testing equipments.
* Monitor & update certification & re-certification of all rotating equipment such as pumps & air compressor.
* Schedule the certification & re-certification of all static equipment & rotating equipment as per company requirements.
* Inquire quotation of load testing, pressure testing, NDT inspection such as visual inspection, dye penetrant testing, magnetic particle testing, radiographic testing, and ultrasonic testing on Third Party Inspection Company & choose which is economical & competent in performing the job.
* Inquire quotations on different purchaser on local & abroad by calling & surfing to internet for equipment to purchase, fabricate & spare parts & find out which is best & economical.
* Witness wall thickness, magnetic particle inspection, penetrant testing, load testing, and hydrotesting of all static & rotating equipment by third party inspection.
* Witness function test of chemical injection pumps, transfer pumps, steam generator, air compressor & burner on burner booms.
* Check procedure & requirements of well test equipment on PWS management system & implement it.
* Check data books & maintenance files & locate all missing documents.
* Prepare certificate for all equipment for shipment to location &other country.
* Assist to Third Party Company for re-certification of all well test equipment.
* Presided safety & toolbox meeting when coordinator is not available.
* Implement HSE procedure & PWS guidelines on pressure testing, function test & maintenance of well test equipment.
* Provide Job Safety Analysis (JSA) & Risk assessment before performing the job.
* Modify P&ID drawing as per instruction by coordinator using AUTO CAD.
* Give help to maintenance group on their job when lack of personnel & when they need.
* Assessment of all well testing equipment condition & making recommendation to maintenance & operation based on the assessment.
* Encode & update all re-certification on the data base to monitor easily its expiration dates.

RESPONSIBILITIES:
(QA/QC SUPERVISOR / QA/QC ENGINEER / INSPECTOR) --- September 2002 to August 2005
* Responsible for supervision of Quality Inspectors & assisting the Quality Manager in his duties during his absence.
* Responsible for approval & qualification of (PQR) Procedure Qualification Record & (WPS) Welding Procedure Specification.
* Responsible for documentation of inspection activities and maintenance of quality control records.
* Responsible for the performance of on-site tasks related to quality control compliance.
* Responsible for providing technical direction to less experienced construction quality control engineers.
* Implements quality control procedures and establish detailed schedules for on-site inspection activities.
* Performs inspection functions in accord with inspection plan and monitors inspection duties assigned to subcontractors and reviews results of inspection.
* Performs or provides input for personnel evaluations on subordinate personnel.
* Ensures inspection duties are in accord with quality program.
* Monitors subcontractors and supplier's workmanship, material, and equipment for quality control compliance.
* Inspects and documents acceptances on construction activities and installations.
* Inspection of static equipment installation such as tanks, vessels, column, eat exchangers, air coolers as per drawing requirements & by using thedolite, plum bob, level instruments, level hose & other measuring tools to ensure it is as per requirement.
* Internal visual inspection of all static equipment with sub-contractor, client & approve for internal installation & final closure.
* Monitor installation of internal trays on column, installation of internals of vessels as per drawing & manufacturer recommendation.
* Inspection of rotating equipment installation such pumps, compressor, fin fan coolers.
* Witness preliminary & final alignment of coupling of all rotating equipment.
* Witness pneumatic testing of reinforcing pads on vessel, tanks & pipes & hydrotesting of it.
* Help the piping inspector on pipe line checking.
* Review / interpret radiographic film of fabricated tanks & piping spools.
* Review / check Post Weld Heat Treatment & Brinell Hardness Number.
* Raising Non Conformance Report (NCR) to all non-conformity.
* Performs Mechanical System Completion & (RFO) Ready for Operation walk down with commissioning & client.
* Audit sub-contractor & ensure they follow the project specification & requirements.
* Review & sign all final documents

RESPONSIBILITIES:
(QA/QC MECHANICAL INSPECTOR) --- May 2001 to April 2002
* Inspection of static equipment installation such as tanks, vessels, column, eat exchangers, air coolers as per drawing requirements & by using thedolite, plum bob, level instruments, level hose & other measuring tools to ensure it is as per requirement.
* Internal visual inspection of all static equipment with sub-contractor, client & approve for internal installation & final closure.
* Monitor installation of internal trays on column, installation of internals of vessels as per drawing & manufacturer recommendation.
* Inspection of rotating equipment installation such pumps, compressor, fin fan coolers.
* Witness preliminary & final alignment of coupling of all rotating equipment.
* Witness pneumatic testing of reinforcing pads on vessel, tanks & pipes & hydro testing of it.
* Help the piping inspector on pipe line checking.
* Review / interpret radiographic film of fabricated tanks & piping spools.
* Raising Non Conformance Report (NCR) to all non-conformity.
* Performs Mechanical System Completion & (RFO) Ready for Operation walk down with commissioning & client.
* Review & sign all final documents

RESPONSIBILITIES:
(QA/QC MECHANICAL INSPECTOR) --- September 2000 to February 2001
* Inspection of static equipment installation such as tanks, vessels, column, eat exchangers, air coolers as per drawing requirements & by using thedolite, plum bob, level instruments, level hose & other measuring tools to ensure it is as per requirement.
* Internal visual inspection of all static equipment with sub-contractor, client & approve for internal installation & final closure.
* Monitor installation of internal trays on column, installation of internals of vessels as per drawing & manufacturer recommendation.
* Inspection of rotating equipment installation such pumps, compressor, fin fan coolers.
* Witness preliminary & final alignment of coupling of all rotating equipment.
* Witness pneumatic testing of reinforcing pads on vessel, tanks & pipes & hydro testing of it.
* Help the piping inspector on pipe line checking.
* Review / interpret radiographic film of fabricated tanks & piping spools.
* Raising Non Conformance Report (NCR) to all non-conformity.
* Performs Mechanical System Completion & (RFO) Ready for Operation walk down with commissioning & client.
* Review & sign all final documents

RESPONSIBILITIES:
(QA/QC ENGINEER / INSPECTOR) --- October 1997 – March 1999
Since characters was limited will send the responsibilities when requested.

RESPONSIBILITIES:
(MULTIPLE QA/QC INSPECTOR) --- March 1996 to September 1997
Since characters was limited will send the responsibilities when requested.

RESPONSIBILITIES:
(QA/QC ENGINEER / INSPECTOR) --- January 1990 to March 1996
Since characters was limited will send the responsibilities when requested.

GOVERNMENT EXAMINATION TAKEN:
Professional Licensure for Mechanical Engineering by Professional Regulation Commission committed a Professional License Number 047136 last January 1994.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 351 to 400 of 7040)Go to Search Parameters...
Brief Description
Extensive hands-on international and United States oil and gas industry experience focused in the full spectrum of Exploitation geology (Development and Production), from mapping and geocellular modeling through prospect generation, operations and reserves reconciliation. TX Lic. #1455
Inspection/Welding Engineer
20+ Years in Drilling, Sr. Drilling Engineer. Land & Offshore
B.E with nearly 17 Years Experience as an Instrumentation Engineer in Construction, Commissioning and Start up, Maintenance support in Power and Oil/Gas plants (On Shore and Offshore) Projects.
21 years in oil and gas industry in field operations
Mechanical Q.C. Engineer and Safety Engineer in Construction, Consultancy.
Project Engineer
civil inspector, site manager, civil engineer
DCS engineering experience : HoneyWell DCS Experion C300 / C200 / TDC2000 / TDC3000 : over 8 year experience in Oil and Gas field in Canada: Revamping and Commissioning at site, and Testing: Another 10 years PLC experience.
Has 18 years + eexp in field of Automation and control and 7 years Middleast experience Previously employed with ABB and Invensys UAE .
Mechanical Engineer/Supervisor(rotating machinery)
Extensive experience of combined domestic and international on well logging industry
Results oriented Senior Piping Designer with experience in managing project scopes, costs, and schedules for numerous small to medium size projects.
Automation Engineer with a Instrument and controls background who has installed and commissioned various DCS Systems worldwide,currently working as a C&I Specialist in the middle east as a client rep. on site acceptance of Control,ESD and Fire & Gas systems.
Process Engineering Opportunity
Dynamic Positioning Control System Specialist
More than 15 years experience in instrumentation, process control, control system (PLC / DCS) and automation (SCADA) design, programming, commissioning and startup, and maintenance. Completed a large variety of the projects in energy, oil & gas, petrochemical process, and water treatment.
Sr Subsea Controls Consultant
A Post Graduate (M.Tech. – Electrical) after Engineering (B.E. – Electronics & Communications), supplemented with training on Project Management having total experience of over 28 years, including initial 20 years in Indian Navy and later 8 years in Project design for Utilities, Oil & Gas, Process
Petroleum Engineer, Safety Specialist.Managing, Administering, and Operating Safety and Environmental Health (HSE) programs. * Management/Budgeting. * Supervision. * Team Leadership. HSE/Strategic Planning and Program Development.
I have an extensive experience in detail design and stress analysis of piping and pipeline system for Oil and Gas Project for more than 18 years. I am familiar with International Code and Standards, EPC Company standard, and Major Oil Company Standard.
Pipe stress engineer
Currently a Senior Reservoir Engineer working with an Oil/Gas Major in Lagos Nigeria. I have had various trainings, both through formal courses and on the job. I worked in a studies team in Aberdeen, basically undertaking studies of hydrocarbon fields.
Over 46 years international experience in IT-Enabled EPC projects for onshore/offshore oil and gas, pipeline, petrochemical, chemical process and cryogenic plants, thermal power including cogeneration plants, refineries, iron and steel, pharmaceutical and other industrial plant construction.
Duties & Responsibilities in different Oil & Gas Operator Companies :
16 years of continuous experience in various field of construction in Oil & Gas, Petro Chemical Plants, Manufacturing Plants, Buildings and Infrastructure as a Lead Field Control Engineer, familiarized & having experience to different kind of works of a Planning Engineer, Schedule Engineer, Cost Con
Inspection in the field of Electrical & Instrumentation Works
Passed in diploma instrument & conrtol skills in dcs system and manage/conrol our staff
Automation, Control, Electrical, Instrument, SCADA Engineer - 30+ years experience
PDMS Piping/Mechanical Designer
20+ Years piping designer
Working for Petrofac International as Commissioning Engineer
Senior process engineer
Marine chief engineer and technical superintendent onshoreGood team player with excellent organization and motivation skills
I have 14 years experience in Piping Design and 5 years in PDMS piping design. I have been responsible for job packages start to finish, Isometric extraction, material extraction, survey & field investigation, P&ID changes, working with PDMS, all versions of Autocad, Microstation, and Cadworx
A Mechanical engineer with 17 years experience in marine,mechanical, hydraulics, pneumatics, electrical, elctronics engineer, Presently working as a hydraualic engineer in bosch rexroth, United Arab Emirates.
Materials Science and Mechanical Engineering, Solid lab skills in materials testing and examination, Failure analysis to determine the root cause. +10 years manufacturing & energy industry experience. Strong Computer skills-Stress analysis, Numerical simulation. Multi-languages
Eighteen years of combined experience in the petrochemical/petroleum and aerospace industries working for engineering contractors and operating companies. Experience with project management, project development, construction engineering, equipment maintenance/reliability, design, cost estimating.
15+ years of experience
Register Mechanical Engineer & certified 3.1 Welding Inspector.Speak , write, read english fluently.Well-versed in computer & different codes & standard like ASW,ASME,API & BS.Good knowledge of AUTO CAD & engineering drawings.
ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING, FIELD SERVICE, SUPERVISION
Petroleum engineering professional with diversified domestic USA and international experience in E&P
Senior Instrument , Electrical, Rotation, Engineer, Project Management
Highly experienced in dealing with Engineering, Project and Procurement coordination for Static equipments and Packages. Experienced in EPC,PMC,FEED and Study type of jobs and well versed with renowned Codes and Owner Company Standards. For further details, please refer my CV attached.
An experienced Manager with muti-skill in Quality Assurance, Quality Control, NDT, Offshore experience, Oil and Gas sector, Rig building projects, internal/external/regulatory audits, Interpretation of International codes and standards .
Experince at:: small and mid-sized projects involving integrity/rehabilitation/repair/construction of pipelines and piping systems – Oil & gas, Pigging operations, Pipeline design
Having more than 15 years of experience in the field of Installation,alignment and inspection of Rotating and static equipments in the field of Oil and Gas,Power ,Petrochemical projects.Can lead a team of engineers,foremans and work force involved in Installation,alignment and inspection of equipmen
19+ years of experience in Electrical Designer Field. Experience in Oil & Gas 3 Years and Power Plant Field More than 16 Years
PROFESSIONAL SKILLS : Sales Management; Sales Force Automation; Team Player and Leader; Project Management; Schedule Maintenance; Auto Cad; Caesar II ; Technical Writing; B31.3; Process Improvement; Strategic Planning; Microsoft Office
I am a petro;eum engineer, holding BsC in petroleum engineering in 1990 worked in drilling as drilling and workover company man and coordinator with Waha Oil Co. for more than 16 years., My experience in vertical and horizontal drilling, UBD, exploration and development , well completion,
First   1   2   3   4   5   6   7   [ 8 ]   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com