Resume - Senior controls and Scada Systems Analyst

Misco Jobs

Resume #78098

CONTACT INFORMATION:
View contact information...

AREAS of EXPERTISE

Emphasis: SCADA

1. PROGRAMMABLE LOGIC CONTROLLERS
A. Allen-Bradley PLC 5 series, old and new platforms
B. Allen-Bradley SLC-500 series, fixed and modular styles
C. Allen-Bradley MicroLogix series
D. Allen-Bradley PLC 2 series
E. Allen-Bradley ControlLogix 5000
F. Allen-Bradley Flex I/O
G. GE-Fanuc Series 90/30 & 90/70
H. Siemens Step 5 and Step 7

2. DISTRIBUTED CONTROL SYSTEMS
A. Honeywell TDC 2000
B. Honeywell TDC 3000

3. MES
A. Rockwell FactoryTalk View
B. Wonderware Archestra and Application Server

4. BARCODE PRODUCTS
A. MicroScan

5. VISION PRODUCTS
A. Cognex
B. DVT

6. COMPUTER LANGUAGES
A. Basic
B. SQL
C. VB
D. VBA

7. NETWORKING (SCADA is one of my very strong areas)
A. DeviceNet
B. ControlNet
C. CANBus
D. ModBus
E. FieldBus (IEC 61158)
F. ProfiBus
G. ModBus
H. ASI_bus
I. Ethernet
J. Cisco routers and Switches
K. Hawking Managed Switches
L. Wireless/WiFi
M. OPC

8. ALLEN-BRADLEY/ROCKWELL SOFTWARE
A. RSLogix 5, 500, 5000
B. RSNetWorx (Cnet, Dnet, Ethernet)
C. PanelBuilder (Icon Based), PanelBuilder (VGA Based), PanelBuilder32 (VGA Based)
D. RSTune
E. DrivesExplorer

9. OPERATOR INTERFACES
A. Allen-Bradley PanelView (icon-based) 1xxx(e) series and (VGA-based), 1000, 900, 600, 550 series
B. Allen-Bradley Redi-Panel
C. Allen-Bradley T-30 (Xycom)
D. Allen-Bradley Dataliner
E. Maple Systems
F. Siemens Coros

10. PC BASED DATA ACQUISITION AND CONTROL
A. Wonderware Archestra and Information Server
B. GE-Fanuc (Intellution) iFIX, RTIP and Historian
C. Rockwell RSView 32
D. Rockwell FactoryTalk View SE
E. Kiethley
F. NI LabView
G. Wonderware InControl
H. Beckoff Twincat
I. 3S CoDeSys

11. MOTORS/DRIVES
A. Allen Bradley Powerflex line
B. Allen-Bradley: SMC Dialog Plus 150, 1336,1305

12. ELECTRONIC INSTRUMENTATION
A. Fluke digital multimeters
B. Tektronix T935A, 214 Oscilloscopes

13. PROCESS / CONTROL EQUIPMENT
A. Burner Management: Honeywell
B. Temperature Controllers: Red Lion, Barber-Coleman, Omron
C. CIP/SIP: Hygienic Pigging Systems

14. SENSORS
A. Capacitive & Inductive: Allen-Bradley, Efector, Honeywell, Pepperl+Fuchs, Turk
B. Conductivity: Endress+Hauser
C. Flow: Endress+Hauser and MicroMotion
D. Humidity: Endress+Hauser
E. pH: Endress+Hauser
F. Photoelectric: Allen-Bradley, Banner, Efector, Pepperl+Fuchs
G. Pressure: Allen-Bradley, Efector, Endress+Hauser, Pepperl+Fuchs
H. Ultrasonic Level: Endress+Hauser
I. Turbidity: Endress+Hauser

15. INDUSTIAL/CUSTOMER STANDARDS:
A. NFPA: NEC 2002, NFPA 79
B. FDA CFR 21
C. GMP/cGMP

16. MANUFACTURING PROCESSING EQUIPMENT
A. Nordson 2K (two part epoxy)
B. Nordson Adhesive Dispensing Equipment

17. SAFETY
A. OSHA-compliant lockout design and verification
B. Customized OSHA-Compliant Control-Reliable Lockout Devices
C. Banner light screens
D. Safety Relays: Pilz, Guardian
E. STI Opto-Mat floor mat controllers, Opto-Fence and Opto-Safe light fences

18. PC SETUP AND DEBUG (DOS, Win3.x, Win95, Win98, NT, XP)

19. FIELD AND TEST ENGINEERING / TROUBLESHOOTING

20. VERIFICATION and VALIDATION
A. IQ/OQ-PQ
1. Pharmaceuticals
2. Food and Beverage
3.Hair Care

21. CONTROLS SYSTEMS / OPERATOR INTERFACE DESIGN (SCADA is one of my very strong areas)

22. TEAM LEADERSHIP / CLASSROOM INSTRUCTION
A. Adjunct Professor-Union Institute and University

23. SUPERVISORY:
A. Managed UAW electricians, pipefitters millwrights, toolmakers over several installation projects
B. Construction and Engineering Superintendent-Ford Motor Co.
C. Lead engineer on multiple FORD system projects
D. Project Manager on multiple FORD system projects

Experience 1979-1985 Ford Motor Company Cincinnati, OhioConstruction and Engineering SuperintendentResponsible for construction of new plants and processes.Supervised upwards of twenty plus engineers and tradesmen.
1984-Present ANZ Engineering, Inc. Owensville, OhioPresident and senior control and scada systems analystStarted business part time in 1984 and incorporated in 1987.20 plus years of continuous businessProjects with ANZ Engineering:1987-1989 R.A.Jones Erlanger, Ky.* Designed and programmed control systems for high speed packaging equipment. HMI development and onsite installation. PLC and PC controls. C programming language was used for HMI.1989-1992 Procter & Gamble Cincinnati, Ohio* Design, Program and Install new soap formulation batching system-TDC 30001992-1994 Procter & Gamble St. Louis, Mo.* Installation of Scada system in soap processing plant. TDC-3000 and PLC data to the Oracle Database. 1994-1999 Siemens/Osram/Sylvania Winchester, KyIn plant projects in Winchester and support of operations in Juarez, MexicoTechnology used: GE 90-30 PLCs; LabView, AB-RSView-AB PLCs; Siemens SIMATIC/ProTools HMI; Step 5 PLCs, Profibus, Data Highway, EthernetSQL, VBA, Ladder Logic and Statement List programming.
1999-Present Pilot Chemicals Cincinnati and Middletown, OhioMaintain and introduced present MES, Scada, and PLC process controlsAllen Bradley-PLCs-RSView-Ethernet, Data Highway +, SqlServerSQL and VBA used for the SCADA system.2002 US Playing Card Co. Cincinnati, Ohio* Wonderware InTouch install and integration of Honeywell gamma gauge used for moisture measurement using OPC communications. VBA used extensively for the scripts in this project.2006 Portion Pac(H.J.Heinz) Cincinnati, Ohio* Maintain and introduced present MES, Scada, and PLC process controls* Allen Bradley-PLCs-RSView-Ethernet, Data Highway +, SqlServer* MSDE 2000 used as data engine. Migrated Access DB (recipe management) to MS Sql Server.2007 LaFarge Cincinnati, OhioPlant upgrade with AB ControlLogix 5000, GE Fanuc iFix HMI, RTIP and Historian. VBA and SQL used.2008 Amylyn Pharmaceuticals Cincinnati, OhioNew plant with AB ControlLogix 5000, AB-FactoryView HMI, PowerFlex drives, Ethernet, ControlNet, DeviceNet, ModbusVBA and SQL used extensively in this project.
Education 1991 Union Institute and University Cincinnati, OhioB.S. Computer Science.
Military 1967–1971 US Navy VietNam Veteran.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 7055)

Go to Search Parameters...

Brief Description

Piping Designer with PDS, Rebis Autoplant, Plantspace, Microstation, AutoCad and ProCad experience.

E & I Technician

i am an fabrication enginner working with saudi aramco gas oil seperation project as a approved qa qc mechanical supervisor since june 2007

Automation, Instrument and Control Engineer Manager

I have B.S in Mechanical Engineering from Bushehr University in IRAN and I have more than 8 years of experience in Oil&Gas field and Power Plant companies, especially in piping division.

B.Sc.(Engineering) Metallurgy and Materials Science.

Certified Cost Engineer. Graduate Mechanical Engineer with over Eighteen Years experience in preparing Project Cost Proposals / Tendering including Estimation / Quantity Survey, Costing and all related activities. Completed Eleven Years in Gulf (Bahrain).

Fifteen years experience in the area of Seismic Data Processing including 2D and 3D land, transition zone, marine and OBC processing. Specialized areas including demultiple applications, imaging techniques, and Amplitude versus offset.

7-year offshore structural engineer with M.S degree

power system protection engineer with avery good experiance in protective relays testing control scheme troublshooting

Instrument Supervisor

Project Planner/Scheduler (Primavera P3 & MS Project Planning Software, MS Word / Excel). Vast experience in Steel Works Business - Planning, Fabrication / Erection (Storage Tanks & Steel Structures), Gas Plant / Pipelines. Completed Structural Engineering and 4 years in BS Mech'l Engineering.

Maintenance supervisor / Reliability specialist / Project Management

Broad base of experience within the Pulp/Paper, Pharmaceutical/Chemical and Bio-Technology industries involving design, engineering, construction, and commissioning. Management of projects (automation, instrumentation and electrical/instrumentation systems), quality, personnel and resources.

Developing & producing plot plans using PDMS 11.2 (CLS), pipe modelling (PDMS-PMS), Equipment modelling (PDMS-EMS), producing Piping Study & General Arrangement Drawings(PDMS-CAST), Producing Isometrics(Isodraft) & used Review Reality station for reviewing the plant model.

Certified ( Project Controls, AACE, #1366), published Engineer (BSPE and MBA) with over 15 years of direct field experience in Operations, budget design, Inventory control, Drilling Engineering, Oil Well Fire Control, Well design and Turnkey Bid estimates.

Education: Master in Chemistry Various certifications on Drilling Technology and Oil and Gas operations. Worked as Mud Engineer with MI Overseas. BakerHughes INREQ and IDF schlumberger in middle east. Worked as lab chemist with QGPC Qater, Mud Engineer with ADC Saudi Arabia ETC

Pr. Management-Estimating man hours, developing WBS CBS, Progress measurement techniques, monitoring by Primavera, project control, invoicing. Engineering-Prep. basic Instr data sheet, detailed ENGINEERING of DCS, FGS, SDS, control logic, SAFE. Commissioning -Elect system of process platforms

I am experienced in long & short range mine planning, scheduling, budgeting, design of safety procedures & standards, production & destress blasting, mine backfill, ventilation, ground control, geomechanics modeling & design of stable openings (using the bifurcation theory in mechanics).

Senior controls and Scada Systems Analyst

Mechanical Engineer Bsc. Hons. Project Engineer. Commissioning Engineer

Directional Driller with horizontal experience in shale and lime. Also have workover and completion experience,

Piping Stress Engineer

Registered civil engineer with Master’s degrees and 5 years of work experience primarily in structural design

Experience on process design of oil and gas industry units, engineering and tender documents preparation. Well familiar with process codes and standards and design requirements

Piping Engineer

Programming/maintenance of PLC/DCS controllers and SCADA systems. Maintenance of electrical/electronic and pneumatic/hydraulic instrument equipment. Maintenance of fire/gas detection systems (turbines, oil/gas production facilities). Excellent communication and management skills.

I am experienced in Air separation Units (Oxygen plants, Nitrogen plants, Argon plants) and Carbon dioxide plants. I am a plant manager and looking after all the activities involving in mafucturing and selling

I am Diploma Engineer in electrical and post diploma holder in Instrumentataion & control having 28 years experience in petro chemical, Heavy chemical , Oil & gas industries in a diffr\erent position in project, maintenance of instrumentation.

Instrumentation Automation Engineer 9+ Yrs Exp

Seeking very challengeable, risky and more responsible jobs to acquire a technical/management position where engineering experience and managerial skills will significantly contribute to product and process development

Control room operator, commissioning, precommissioning, plant start up, normal shut down, fire and gas, process, production, turbine.

Technical and sound Instrument engineer

15 years in the oil and gas industry including WesternGeco and Halliburton – Landmark Graphics Corporation. Areas of expertise include seismic data management, seismic and well data loading and conversion.

I am a Senior Instrumentation Technologist with 15+ years experience in the Instrumentation Engineering field; and I am well versed in project execution from FEED through to commission and start-up with a strong emphasis on efficiency and safety.

IT , Hysys,English language

Duties and Responsibilities:

Senior coatings/painting inspector

I am an Instrumentation and Control Engineer with a Doctorate Degree. I am experienced in designing and developing advanced controllers

Rotating equipment Engineer

QA/QC Inspection Engineer

Over Eight (8) years of total experience in Process Engineering which includes Basic Engineering, Detailed Engineering for Oil & Gas Offshore (fixed platform) & Onshore Processing Unit, Underground Gas Storage Facilities, Hydrogen Generation Unit, Naphtha Splitter Unit and Flow Assurance Study fo

Electrical commissioning technician / completions

I have spent 12 Years working as a DC Surveyor / Piping Designer in an onshore/offshore environment. Two of the main construction projects that I have been involved in was the BP Holstein and the Chevron Tahiti Spars. I have also spent a substantial amount of time working in petrochemical refineries

Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream, midstream and downstream activities in oil and gas industry.

Control System professional with 18 years experience and PMP and Six Sigma Green belt certified

Acting as QA/QC Manager/Cordinator (Welding, Inspection & NDT), with more 15 years of experience in the Middle East and European Union in the field of Oil & Gas and power piping projects. Experienced in work with multinational engineering companies (ALSTOM. TOTAL, KAVAERNOR¡K)

Experienced Instrumentation & Control system Engineer, interest in Projects, Proposals and Commissioning

Surface and Interfecial Sciences, Condensed Matter Physics, materials Sciences, UHV Techniques, Analytical Chemistry.

I have 12 years experience in drilling oil wells(development and exploration) and operation monitering. I have a bachelors degree in mechanical engineering.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out