Resume - Please accept this cover letter and enclosed resume as my application for the po...

Misco Jobs

Resume #78134

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE: To obtain a challenging position in Instrumentation & Controls division, where I can fully utilize my Professional skills & experience, which I have acquired over the last 15 years in Design, Construction of instrumentation, control, electrical and piping engineering on onshore and offshore oil & gas projects.

DEFINITION:
Under general direction of a Lead Engineer or Project Manager, performs and oversees professional field and office Instrument and Control engineering work related to the planning, design, construction of OIL & GAS projects. Checking, including managing complex detail engineering projects; providing professional assistance and technical advice to clients; coordinating projects with contractors, other departments and other agencies; evaluating requests for changes or additional work; directing the work of subordinate professional staff; and performs related work as required.

PROFESSIONAL SUMMARY:

* Skilled in a variety of areas from estimation through to design completion, including instrument specifications, package unit control, DCS interface and design team liaison
* Supported the project team in cost estimation, EPC tender package compilation, Bid Reviews, Liaison with Vendors, and Assistance with Scheduling of Projects.
* Trained in Control Valves, Pressure Relief Valves sizing.
* Executed Inspection, calibration, Installation, Testing, Loop checking and Commissioning of all field devices (Yokogawa, Fisher Rosemount), including on line Sulpher analyzers.
* Thorough knowledge in use of Standards relating to Instrumentation engineering: CSA, API, ANSI/ISA, and Hazardous Area Classification of Instruments.
* Proficient use of MS Office: Excel, Autocad and InTools.
* Sizing and selection of the Valves and Flow meters.
* Flexible, self-motivated and self-starter professional who always meets deadlines.
* Analytical, problem solver, quick learner and dedicated team player.

PROFESIONAL EXPERIENCE:
SNC-LAVALIN INC. Calgary, Alberta, Canada 2004 – 2008
Senior Instrument Technologist
* Husky Energy, Clean Fuels Gas Project, Prince George, BC (March 2004 – March 2005). Engineering for field Instrumentation. Preparation of instrument specification, Review vendor Technical bids, Approve Vendor Drawings and specifications.
* Petroleum Development Oman L.L.C. Saih Nihayda Gas Plant And Associated Facilities, Saih Nihayda, Oman (April 2005 – June 2005). Involved in Plant start up and commissioning related activities, resolve Punch list, gather site mark up and supervise As built design team.
* Saudi Arabian Oil Company (Saudi Aramco) Sauthern Area Water Treatment Plant (July 2005 - 2007) Involved in Detail Engineering. Preparation of instrument specification, Review vendor Technical bids, Approve Vendor Drawings and specifications.
* Saudi Arabian Oil Company (Saudi Aramco) Shaybah GOSP-4 (July 2007 - 2008) Involved in Detail Engineering. Preparation of Material Requisitions, Sizing and Selection of Flow Instruments, Control Valves.

MOTT MACDONALD LTD. Abu Dhabi, U.A.E.
Instrument Specialist 1998 - 2003

Mott MacDonald Engineering is a UK based ISO-9001 and ISO-14000 certified, multi discipline engineering consultant with offices worldwide.

MAJOR PROJECTS:
* Cawthron Channel Associated Gas Gathering Project: SHELL, Nigeria.
* Asab & Bab Integrated Control System: GASCO, Abu Dhabi.
* Al Khalej Northern Area Field Development: TOTAL ELF FINA, Qatar.
* Emergency Shutdown Reliability study: ADMA-OPCO, Abu Dhabi.
* Das Island - Flares System Revamp: ADMA-OPCO, Abu Dhabi.
* Bu Hasa - Replacement of main oil line pump: ADCO, Abu Dhabi.

RESPONSIBILITIES:

* Review and Approve I/O List, ILD (Instrument loop diagrams), Hook Ups and RFQ Packages for Instrumentation and Control systems.
* Prepared detail design wiring diagram, Cable Routing Layout, Instrument Layout, Plot plan, Fire & Gas equipment layout, Cable schedule, Process Hook up drawing.
* Prepared Piping and Instrumentation Diagrams, Cause and Effect matrices, Logic Diagrams, Cable block diagrams.
* Review Vendor bids, drawings and specifications.
* Discuss with clients on design, time, cost estimations and other project management related issues.
* Provide technical support to contractor during field installation and commissioning.
* Onshore and offshore site survey.
* Preparation of instrument specifications.

ABU DHABI MARINE OPERATING COMPANY(ADMA OPCO) Abu Dhabi, U.A.E.
Senior Instrument Specialist 1997 - 1998

ADMA-OPCO is a pioneering oil and gas producer in Abu Dhabi, whose operations are centered in the offshore areas of Abu Dhabi.

MAJOR PROJECTS:

* Modernization of Offshore Control System from Pneumatic to Electronics.
* Modernization of Das-island Control System. from Pneumatic to Electronics

RESPONSIBILITIES:
* Project involved the replacement of existing field pneumatic instrumentation and conventional operator control panels with new smart series field instruments and state of art control system which included Honeywell TDC-3000X DCS, Triconix ESD system, F&G systems
* Reviewed P&ID, Instrument Specifications, ILD (Instrument loop diagrams), Hook-ups, cable schedule, equipment location and as built drawings.
* Liaison with manufacturer and engineering contractor.
* Co-ordinate with design and construction department.
* Assisted in drawing development, site work with sub contractor to check all facet of Instrumentation modification.
* Check and Approved as built drawings.

NATIONAL PETROLEUM CONSTRUCTION COMPANY. Abu Dhabi, U.A.E.
Senior Instrument Specialist 1996 - 1997

RESPONSIBILITIES:

* Involved in commissioning and construction activity at site Answer technical inquiries; make technical recommendations to construction team.
* Instrument Installation, Testing.

JACOBS ENGINEERING Abu Dhabi, U.A.E.
Instrument Technologist 1992 - 1995

RESPONSIBILITIES:
* Develop design documents for Abu Dhabi Onshore Oil Operation Company (ADCO) at its various onshore oil producing facilities.
* Field survey and study manufacturer's drawings to carry out modification in existing facilities.

KAVERNER POWERGAS LTD, Bombay, INDIA
Instrument Technician 1988 - 1992

RESPONSIBILITIES:
* Prepared Instrument Index, Hook UP Drawings, Bill of Material, Control Panel Layouts, Relay Logic Diagrams, Loop Diagrams and Instrument Layout.

EDUCATION
* 2004 Instrumentation and Control Diploma from SAIT.
* 1987 Mechanical Engineering Diploma, Bombay Polytechnic. Bombay, India.
* Piping Design Diploma, Academy of Technician, Bombay, India.

REFERENCES AVAILABLE UPON REQUE

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 6997)

Go to Search Parameters...

Brief Description

QUALIFICATION :- DIPLOMA IN ELECTRICAL ENGINEERING WITH FIRST CLASS

MSc in Petroleum Engineering from the University of Oklahoma, USA with over 11 years of experience in both Industry and Academia to offer.conduct reservoir management activities and participate in interdisciplinary reservoir study teams. Bring a focus on performance of complex tasks.

Extensive experience in the petroleum, chemical, pharmaceutical, nuclear and environmental fields. Directed engineering, manufacturing, and construction efforts, including startup and commissioning for owners and contractors alike.

Control Systems (SIS/DCS/PLC) Engineer with >25 years of experience on various process, gas, refining, chemical and petrochemical plants/EPCM in Canada, Saudi Arabia, India & USA. „« Currently doing Detailed Engineering to SAT of Shell¡¦s Upgrader Expansion Project at Bechtel Canada Ltd.

All I&C design aspects. IN-Tools, Microstation, Autocad, MS Office suite software.

Over twenty-eight years in various assignments throughout the oil and gas industry, I have had twenty one years within the production side of the field, including work off the Gulf of Mexico and Venezuela. I have been in charge of multimillion dollar production platforms, responsible for monthly we

Vastly experienced electrical engineer, manager, superintendent, supervisor

Over 25 years of Diverse Design and Drafting Experience

instrument Engineer in OIL& GAS field

Write-up pre-commissioning, commissioning procedures, start-up schedules and reviewing. Provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules.

A piping designer that has multiple experience in piping industry. Holder of BS Mechanical Engineering with piping design experience over 7 years and more than 5 years of field assignments. A designer that has proficiency in 3D CADWorx, Microstation, AutoCAD, Navis Works, Laser Scan, & PDS trained.

12+ years of project and design engineering with subsea oil and gas installation contractors and consultants working on package management, site management, installation engineering, FEED and Detailed Design with a strong focus on Subsea Pipelines

Doctor of Philosophy in Science in Exploration Geophysics, IIT, Kharagpur, Calcutta, India (1977-82).• Master of Science, Technology in Exploration Geophysics, Osmania Univ., Hyderabad, India (1974-77).• Master of Information Technology, Curtin University of Technology, Perth, WA, Australia

Mechanical Engineer - Rotating Machinery & Packages

Sound knowledge of all aspects of Oil and Gas Field Process Engineering including Process Simulation, Pipeline Simulation, Preparing PFDs and P&IDs, Vessel Sizing and Specifications, Pump Hydraulics, Line Sizing, PSV Sizing and Flare Header Sizing, Depressurization and Blow down Calculation.

I am having 10 years experience in Oil & gas industry (Offshore & Onshore) in the field of Inspection, QA/QC & NDT. Certified CSWIP 3.2, API 570 & ASNT Level II-RT, UT, MT & PT

Areas of Expertise: Design of offshore structures performing Global and Local analysis of Floating Production Systems, Jack up Platforms, Semi Submersible Platforms & Jackets,

QA/QC-INSPECTOR/ENGINEER- E&I

9+ years of work experience in Content management & Data Cataloguing

Mechanical Engineer with 10 years of professional experience mostly in ESP and HPS designed worked for Schlumberger REDA and Woodgroup ESP. in artificial lift.

Groupement Berkine (Sonatrach-Anadarko Corporation) currently base in Hassi Messaoud, Algeria

Field Engineer in Middle East

I am a Petroleum Engineer of 14 years of oil and gas experience I have broad based skill that spread into financial and management and Reservoir modeling,seismic interpretation,seismic inversion ,great marketing skill.I have created a niche for myself in directional surveying in Nigeria.

Condition monitoring Engineer with 10 years experience in oil and gas industry(Vibraton Analysis,Thermography)

Oil & Gas Offshore Architect: Living Quarters / FPSO Accommodation Design

An Inspection / Static Equipment Integrity Engineer with 14 years experience in oil and gas industry.

Motivated drilling/completion engineer, with considerable hands-on experience and excellent credentials, seeks opportunity to perform at peak potential for an aggressive company. Has achieved a solid reputation for managing challenging technical operations efficiently and economically.

A motivated, team player possessing outstanding problem solving skills related to internal/external offshore operations, along with excellent communication and computer skills. Over 20 years of hands on engineering and operations experience in offshore drilling, subsea control systems, installation

8 Years Experience in NDT field. Performing NDT Inspection on Vessels, Columns, Cross Country Pipe Lines and Oil Field, Offshore Plat form, Petroleum Refineries, Fertilizers, Tanks and Fabrication Yards.

APPLY IN TECHNICIAN TURBOMACHINERY AND PLANT OPERATORS KNOWLEDGE

Piping design for PetroChemical,Refinery,Offshore,Marine,Mining,Pipeline,Power, Pulp and Paper fields. 15 years PDS experience. Field and fabrication shop experience. Capable of orienting towers and platforms. I pride myself with working with other disciplines. Willing to travel.

Senior/Principal Piping Designer/Checker

Structural Design, Stress Analysis, FE Analysis (Nastran / Patran, ANSYS 11.0) and Structural Calculations in MathCAD (Ref: Roark’s, API, ASME B31.3 and DNV)

24 years experienced Sr. Piping designer, well skilled in PDS, PDMS and microstation

Wide experience leading project engineer assignments working with design/engineering teams in the supervision, development and preparation of engineering and construction documents and drawings.

Mechanical Engineer - Project Engineer- Construction Supervisor – Mechanical/Construction Superintendent and Contract Administrator for Oil & Gas Industries.

Highly skilled in Electrical and Instrumentation field engineering and technical Advisor on GE control systems

Compounding & QA enginer

Mechanical Engineer

Please accept this cover letter and enclosed resume as my application for the position of Instrument Technologist with your organization.

More than 6 years work experience as a Project Engineer and successful in running 40 gas station projects.

Many years of work and academic experinces with the AutoCAD software and some classes in the ESRI -GIS software.

NAME:JOHN GOODDY

Master Electrician \ Instrument Tech \ PLC Programmer

Responsible for implementing and execution of water well drilling/work over programs given by Clients. Ordering materials required for Well Construction. Organizing and controlling the rig crew. Monitoring the daily drilling activity. Communicating with Client and Company.

MEng is a Staff Petrophysicist with 14 years experience specialising in petrophysical evaluation and 4 years in wireline/LWD operations. Career history includes working currently as a petrophysicist to support logging and coring operations, and performing petrophysical evaluations

Currently working as Senior Corrosion Engineer. Experienced in routine and non-routine corrosion mitigation and control activities, Topside inspection.

I am a postgratuate with 15 years experience in Oil/Gas - design of HV and LV from 132kV, 66kV, 33kV, 22kV, 11kV, 6.6kV & 440V level

Static Equipment Mechanical Engineer

Simulation studies, preparation of detail feasibility reports, FEED package, detail engineering, HAZOP, licensor selection, debottlenecking of existing units etc.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out