Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #78144 next resume »»
CONTACT INFORMATION:
View contact information...

Education:University degree in civil engineering ( M.S.), Bachelor degree in Economics

Languages: English, German, French, Dutch, Portuguese, Mandarin Chinese (Basic)

Areas of expertise:

Management of projects covering design, procurement, fabrication, construction, installation, hook up and commissioning involving:

FPSO's (refer to Bunga Kertas,, Espoir field development, Girassol and Rospo Mare projects), including topsides.

Jackets and decks (refer to SYMS, SHG and I-MNTW projects, total 7 jackets) SYMS platform

Pipelines (refer to SHG, I-MNTW,SHW field development projects, Upper Zakum Main Oil Line & Loading lines, IPC-Heera trunk line project)

CALM buoys and Offshore terminals (refer to Sungai Udang, Sirte Oil, Cilacap, Upper Zakum, Girassol(deep water buoy), Erha (deepwater buoy), Ash Shirh and Dung Quat projects)

Onshore pipelines and pump stations (refer to extension of Indian Oil terminal at Salaya, Sungai Udang and Dung Quat projects)

Hook up works (refer to SHG,I-MNTW,SHW, upgrading of BPB and wellhead platforms in Bombay high field)

In depth knowledge of contractual terms and conditions, design and construction methods and keen commercial negociator.

Computer skills: Extensive programming experience in C, FORTRAN, and Visual Basic languages.Enthusiastic PC user, fully conversant with the use of word processing, spreadsheet, scheduling and data base software. Fully conversant with drafting programs such as AutoCad 2007, Microstation, and Primavera planning package.

Contact details
E-mail: jvdh_2@hotmail.com (note the underscore "_" between 'h' and '2')
Mobile: (+)-60-12-499 36 63 or +(60)-12-503 82 87
Fax: (+)-60-4-826 9722 or (+)-1-770-818 5773
-----------
2006-2008
----------
Company: Bluewater China Offshore Equipment Production Co Ltd.
Position: Construction Manager/Site company representative
Responsibilities: Construction Management for fabrication of Jacket, topsides, covering all phases from shop drawing, procurement, fabrication, testing and pre-commissioning to load out.
Structure: Construction of Soft Yoke Mooring System (SYMS) platform for the Bohai field, client ConocoPhillips China Inc. the project involved the fabrication and load out of:: jacket (2000 tons), Piles (2000 tons), topsides (2,800 ton) and yoke arms (800 tons).

----------
2005-2006
----------
Company: Technip Malaysia Sdn Bhd
Position: Construction Manager
Responsibilities: Construction Management for fabrication, erection, offshore installation works, for onshore/offshore pipeline, tank, pumps and SPM
Projects: Construction of crude oil offloading terminal, water intake and outfall lines and associated basins.- Client: Dung Quat refinery, Vietnam
-------
2005
-------
Company: Canyon Offshore Ltd.
Position: Project Manager
Responsibilities:
Management of sub sea trenching, umbilical laying and survey projects, responsible for all aspect of the works including client liaison, procedure development, appointment and supervision of subcontractor, offshore works, QA and HSE aspects, financial close out. Outfitting of cable lay vessel for umbilical lay, trenching works.

Projects: several projects involving trench, umbilical and flexible pipeline installations, clients BP, Gaz de France.
------------
2004 -2005
------------
Company: Pegasus Inc.
Position: Client representative
Responsibilities:
Management/Supervision of offshore pipeline installation contract on Owner 's behalf
Projects

Installation of Ashdod to Hadera pipeline with related onshore tie in works, offshore Israel, client Israel Electric Corporation Ltd.

-----------
2003- 2004
-----------
Company: Stolt Offshore Services S.A.

Position: Project Manager offloading and mooring system

Responsibilies:

Management from engineering through field installation, including subcontract and vendor management of FPSO mooring and deep water offloading system.

Project: Erha FPSO
-----------
2002—2003
-----------
Company: Intec Engineering SEA Sdn Bhd
Position: Construction Manager
Responsibilities:
Management of all aspects of the works performed by shipyard, topside fabricator and bow turret designer and fabricator. Starting with contract negotiations with shipyard, coordination of day to day works, interface management with contractors and suppliers. Project schedule and cost control
Projects

Projects:

Conversion of MT "Bunga Kertas" to FPSO –Penara & North Lukut field, offshore Peninsular Malaysia- Malaysian International Shipping Corporation.

-----------
2001- 2002
-----------
Company:Canadian Nexen Inc.

Position: Project Manager

Responsibilities

Management of all works related to the installation of second buoy and associated pipeline at Nexen's Ash Shihr Export Terminal. Starting project definition, budgeting followed by preparation of tender document, evaluation and contract award.
Projects

Second loading buoy and associated pipelines at Ash Shihr Export Terminal –Offshore Yemen- Canadian Nexen Petroleum Inc.

-----------
2000- 2001
-----------
Company: Prosafe Production Pte Ltd (company formerly called Nortrans Offshore Pte Ltd. before take over early 2001)

Position: Project Manager

Responsibilities

Management of all activities related to a FPSO conversion project, covering the design, procurement & fabrication of all equipments, components for a floating production system. including its installation. Interface with client, supervision & coordination of design activities performed in house and by outside consultants, subcontractor and vendor supervision and inspection. Responsible for performance of all project activities within the budget, and in accordance with project schedule.

Projects:

FPSO for Espoir field development – Espoir field offshore Ivory Coast – Client Ranger oil Cote D'Ivoire SARL – Processing capacity 45,000 BCPD and 40 MMSCF of gas per day

-----------
1998-2000
-----------
Company: MPG – Mar Profundo Girasol – joint venture between Buoygues Offshore and Mc Dermott ETPM (Stolt Offshore)

Position: Project Manager loading buoy and FPSO mooring

Responsibilities
Management of all project activities related to the design, fabrication, transportation of an offloading system and installation of loading buoy & FPSO, both located in 1400 m water depth. Coordination and supervision of in house design work on loading lines and their interface with the loading buoy & FPSO. Contract negotiation, approval of design, site supervision and quality control of the works undertaken by the buoy manufacturer. Profit and loss responsibility for this part of the project. Emphasis was on the technically challenging aspects buoy project, the CALM buoy in the world's deepest waters, and the commercial complicated nature of this state of the art project. For the FPSO mooring system activities covered the design, procurement of the different components, and integration of these in the floater's hull. Development of detailed procedures for installation of both mooring buoy and FPSO on location.

Projects

Offloading and mooring system for MPG FPSO

----------
1997-1998
----------
Company: Intec Engineering, Houston, USA

Position: Construction Manager

Responsibilities

Overall management of Construction projects undertaken by Intec's regional office in Kuala Lumpur, Malaysia. Duties covered the overall coordination of the works design review & approval, contract negotiation, supervision and quality control of procurement activities and subcontracts, progress assessment, payment control, interfacing with client on a day to day basis and by formal presentation to client's board of directors. This position required a wide hands-on experience in contractual and technical matters. Training and education of local staff was part of the assigned responsibilities. Preparation of bid packages and pricing of new projects.

Projects

Installation of SPM system for 350'000 Dwt tankers at Sungai Udang (Melaka), client MRC, management of EPC contract

-----------
1995-1997
-----------
Company: GAL Offshore Services limited. Bombay, India

Position: General Manager/vice president Construction

Responsibilities
Set up from grass roots of offshore construction department Execution of all offshore works undertaken by the company.

Projects

My duties with this company started with setting up an offshore construction department to perform all activities from price preparation, commercial negotiations with client, project execution, till financial phase out of the project. Recently the company has merged with Great Eastern Shipping Company.

Installation of three replacement pipelines in the Dorood field, client Oceaneering, Owner, National Iranian Oil Company (NIOC),Location Kharg Island, Arabian Gulf

Upgrading of BPA-BPB platform's, subcontractor to Essar Oil Limited, Owner, Oil and Natural Gas Corporation, Location Bassein field, offshore India.

SHG remedial works, subcontractor to Daewooo shipbuilding and heavy Industries, Korea,, Owner, Oil and Natural Gas Corporation, Location Bombay High field, offshore India

Upgrading of wellhead platforms in Bombay High field. Subcontractor to Mazagon Docks,, Owner, Oil and Natural Gas Corporation, Location Bassein field, offshore India.

------------
1991 – 1995
------------
Company: National Petroleum Construction Company Abu Dhabi, United Arab Emirates

Position: Deputy Project Manager

Responsibilities

Overall project management responsibility for major Offshore Installation and Hook up Works for jackets and

Projects

SHG Process complex client Oil and Natural Gas Commission, location Bombay High Field offshore India l-MNTW infill platform project, subcontractor to Larsen and Toubro, Owner, Oil and Natural Gas commission, Location Bombay high field, offshore India

SHW project, Subcontractor to Daewoo Shipbuilding, Owner, Oil and Natural Gas Commission, location Bombay High Field offshore India.

IPC-Heera trunk line, Client Oil and Natural Gas Commission, Location Bombay High & Heera Field, offshore India.

-----------
1985– 1990
-----------
Company: Single Buoy Moorings, Monaco

Position: Manager Installation Department

Responsibilities:

Preparation of detailed procedures for installation Mooring Buoys, Floating Production Units, including loading lines and intra field pipelines. Development of Bid Packages for Installation Works, negotiation of contracts for execution of same. Monitoring of execution of offshore works, end of contract settlement and claim negotiation.

Projects
Installation of Mooring Buoy including Design, Procurement and Offshore pulling of 32 inch deballast line, Client Sumed, Location Sidi Kerir (Alexandria) Egypt

Design and construction of 8 and 6 inch lines. The concrete coated pipelines were simultaneously pulled from onshore make up site to sea., with PLEM attached. The spread mooring consisted of four buoys, tied to the seabed by anchors. The contract included the installation of land lines (10 km) connecting the terminal to the onshore facilities.

Repair of 1O inch oil line at Ekpe platform client Mobil Oil Nigeria, location offshore Nigeria

Repair of a 6 and 8 inch pipeline, client ELF, location offshore Gabon.

Installation SBM and 48 inch loading line at Sirte oil terminal, client Sirte oil Cy, Offshore the Libyan coast.

Installation of 3O kV electrical cable at Djeno terminal client Elf Congo, location offshore Congo

Project management for installation of 30 km long electrical cable between an offshore platform and the onshore oil terminal.

Fabrication and installation of SBM, with associated extension of 42 inch oil line at ADCO oil terminal, client ADCO oil Cy, location offshore Abu Dhabi

Project management for design and construction phase of pipeline extension at ADCO's Abu Dhabi oil terminal, including the re-use of existing pipe supports and combined pipe cum plem installation from a lay barge.

------------
1981 - 1985
------------
Company Bouygues Offshore, Paris, France

Position: Project Manager Offshore projects

Responsibilities:

covered all aspects related to offshore contracting such as preparation of bids, design engineering, development of installation methods, follow up during execution of the works. Technical aspects included for platforms: jacket launching, upending and pile driving ;for pipelines: design (hydraulic, stability, weight coating design), detailed procedures for pipe laying riser installation, specification for all materials and services required for the project. Client relations from bid till claim settlement stage.

Projects

Installation of jacket, topsides and associated flow lines for process platforms in the Kambala and Takula fields, Client Gulf Oil Co., location offshore Cabinda.(West Africa)

project management of the outfitting of lay ramp on the BOS 400 barge

------------
1978 - 1981
------------
Company: R.J. Brown and Associates Rijswijk, The Netherlands

Position: Project Engineer

Responsibilities:

design of pipeline systems and supervision of construction activities on sealine installation works

Projects

Development of the Upper Zakum field, Client ADNOC, location Arabian Gulf offshore Abu Dhabi

Design of the Main oil line and three loading lines, pipe sizes were 42 to 48 inches.48 inch pipeline across the Firth of Forth, client British Gas, location Scotland

24 inch gas line from North Rankin platform to Dampier client Woodside Petroleum Offshore Western Australia.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 951 to 1000 of 7054)Go to Search Parameters...
Brief Description
I am Vasu Jajala working in Shell Nig.Ltd. As a Construction Instrument Supervisor. I have 16 years plus of practical experience in the field of Process/Machine Control Instrument of Offshore & Onshore, Petrochemical, Petroleum refinery, Oil/Gas and QATAR LNG industries.
A proactive and analytical Mechanical Engineer with over 12 years experience of Working in a Multinational and Multi cultural work environment in fabrication operations, welding processes, project management, quality / process enhancement ,maintenance with highly regarded organizations.
Over 15 years of relevant experience in Mechanical Engineering and management. Over 5 years of technical authorship in Oil & Gas Industry. Extensive knowledge of machinery, equipment and heavy duty vehicles, maintenance and repair strong practical skills and managerial abilities.
sedimentologist with 16 years of experience in siliclastic and carbonate rock:core descripton, petropgraphic analysisand diagenesis interpretation
Professional Geologist with over 16 years worldwide experience working for major operating companies in asset management/development teams, exploration and production. Worked on a wide variety of clastic and carbonate reservoirs. Key competences are listed below.
Sr. Piping Designer - CadWorx/AutoPlant
An ambitious and highly skilled Petroleum engineer with extensive experience in reservoir engineering, well testing, reservoir fluid analysis, ISO certification, production, management, product development and launch, and customer support.
Contracts specialist with Engineering background having more than two decades experience in both Operating and Contracting companies.
Piping Design Engineer with 15 years of international experiences in the EPCM environment. Performed at a various level in the engineering design to construction site for oil sands projects, refineries, petrochemical, pump station & pipeline, and onshore facilities.
Senior Reservoir Engineer with 15+ years of broad based international experience gained in reservoir simulation, field appraisal, field development planning, reservoir surveillance, reservoir management, wellsite operations and working in integrated multi-disciplinary study teams.
Graduate, Electrical Engineering Degree Holder, Working In Indian Petrocehmicals Corporation, India Since Last 19 Years - As A Senior Technician (Supervisory Post)
Senior process engineer upstream oil and gas design consultancy. Ammonia plant operation manager. Process engineer for chemical petrochemical plants
Reservoir Engineer
PDMS Instrumentation Designer
Well experienced in the field of Mechanical maintenace of rotating equipments like compressors, pumps,turbines in Petrochemical and Oil & Gas Industry in India and Middle East. Worked with Shell affiliate NOCIL in India, Reliance India and Sabic, KSA as Mech.Technician & Supervisor.
QA/QC Engineer in onshore oil field with ASNT Level -II in UT RT PT MT . M.TECH and B.TECH in Mechanical Engineering.B.TE
Electricial technician now i am working in mask oil qatar
PDS(2.5Years),SmartPlant,Navisworks,MicrostationV7.1(3Years),AutoCad2006(5 years),MS-Office
Skill: 11 Years Structural designer ( Including 2 Y rs. in PDMS , 2 Yrs. in PDS & Micro-Station ,3 Yrs. in X-Steel , 4 Yrs. Auto-Cad ) Qualification: B.E Production Engineering - First class – April 2009 – MIT Anna University, Diploma in Mechanical Engineering – First class - April 1998.
I start my profession life from Techno Agriculture when I done Agriculture machinery repairing. After that I went to Saudi Oger and work on Hydraulic
Total 7+ years of experience in Refinery, Petro chemical, Power Plants (steel & RCC structures) and Industrial Buildings.
Project Engineer with filed experience in Marine industry, oil & gas and renewable energy industry
A qualified mechanical engineer having a litany of professional courses with 11+ years of extensive track record in heading key engineering divisions and technical operations/maintenance, across diverse geographical locations in the Oil & Gas industry, seeking a managerial/engineering position with
Rock physics / Petrophysics
“Petroleum and Gases” University Ploiesti, Romania
Over 6 years of experience in analysis and design of steel and concrete structures
15 Years Geospatial Experience. Oil/Gas, Pipeline Design/Engineering, Land Management, Geospatial RDMS
I am an Instrument Designer with more than 25 years experience, predominantly in the Oil and Gas Industry. I have extensive supervisory experience in multi-discipline and multi-national working enviroments.
Lead Auditor - ISO 9001:2000 Series; CSWIP 3.2 Senior Welding Inspector; CSWIP 3.4 Radiographic Film Interpreter for Group A & B materials; CSWIP - BGas Grade 2 Painting Inspector; 28 years of oil and gas industry experience both onshore and offshore. 5 years Refinery experience as Plant Inspector.
Talented and accomplished Naval Architect with extensive FPSO, FSO Conversion, Ship Design and Shipbuilding background particularly in the areas of trim and stability, strength of ships and ship structures. Proven ability to design FSO, FPSO and various types of ships. Able to liaison between tech
Well established Petroleum Exploration and System Analyst with over 15 years of experience in the international petroleum industry combined with a PhD in Petroleum Geochemistry.
I am a fully qualified and experienced Health, Safety and Environmental professional with 14 years upstream Oil & Gas industry experience working around the world for International Oil companies
Registered Professional Engineer in Ontario, Canada, Mechanical Engineer BSc. & M.Eng.
Project Management and General Management Professional
Project /construction director/manager FPFO, Jacket and decks, Modules, loading terminals (shallow and deep water)
Has proven ability in design engineering, fabrication drawing detailing, material quantity estimation, fabrication, and installation & commissioning supervision. Familiar with international design codes, standards, procedures, and engineering practices.
Sr. piping design
Professional Civil Engineer with over 11 years of experience in the oil and gas industry focused in the analysis and design of different types of structures, such as frameworks, pipe racks, bridge trusses, operation platforms, vertical tanks supports and their foundation, and retaining walls.
A geologist with experience in the oil industry involving exploration and development projects in Guatemala South Peten basin, geological information database management, mud logging in oil drilling activities, oil tanks gauging(1996-2004). Logging geologist in USA (Nov 2005-Mar 2009)
Experienced and motivated Ph.D mechanical Engineer
Oilfield Experience 34 years. 33 years with Well Services. I began my career as Well services Technician and my last jobs with Well Services as a Team Leader responsible for Slick Line operation in both Gas and Oil wells.
Civil engineer/pipeline precommissioning
multi-disciplined autocad designer
Performing work as per international standards following operational excellence management system
Extensive 20+ year’s professional experience in instrumentation, control and automation for Oil, Gas and Petrochemical industries.
I have sufficient exposure in dealing with International Audit and Inspection like MCA-UK., U.S.F.D.A., MCC - South Africa, WHO Etc. Man Management is my proven skill for years. Maintain focus on achieving bottom line result while formulating and implementing the advanced technolog and productivity.
Experienced Drilling and DHS Supervisor
M.Tech Geo-Engineering, 9 years of proven industry experience in Geology, GIS, RS, Image processing, QA & Testing, Performance Engineering on Financial, Accounting, CRM, ERP, Retail, B2C Web & Client Server applications like ESRI arcGIS, ERDAS, MapInfo, AutoCAD, Java, J2EE & .Net, Data Warehousing
Perform all oil and gas estings, envirmental testings, wwtp testing, utility relating testing, chemical preprations, well testings, auxlery fireman, first aider, isorelating working, hse relating working, master in chemistry,
Instrumentation and Control - FEED, Detail Design, Construction, Pre-Commissioning, Commissioning
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   [ 20 ]   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com