Resume - Drilling exploration production, per cv below

Misco Jobs

Resume #78200

CONTACT INFORMATION:
View contact information...

Point of Hire: Singapore

Place and Date: Montenegro former Yugoslavia 11-02-1962
Of Birth

Marital Status: Single

WORKING EXPERIENCE

Position: VIETNAM BASE MANAGER
Company: AKER SOLUTIONS
Country: Vung Tau, Vietnam
Position: Aker Solutions Base/Service Manager
Year:: August, 2006 to present time
Duties: Responsible for Base and Service in Vietnam

Position: LOGISTIC COORDINATOR
Company: SOMEPORT-WALON, AMEC SPIE, UK
Country: Yemen
Year:: May, 2006 to August 2006
Duties Mainly responsible for transporting pipe from Aden to Balhaf south of Yemen route required for building pipeline on YLNG project, besides, involved in transporting heavy equipment compulsory for building Yemen LNG plant.

Position: SERVICE REPRESENTATIVE
Company: AKER KVAERNER
Country: Vung Tau, Vietnam

Year:: February, 2004 to May 2006

Duties: Working as Service engineer in Vietnam, mainly covering work for Cuulong JOC, PCVL TSJOC, KNOC, JVPC, BP,DAU HOUNG Also, I was with Aker Kvaerner working for Dauphin Energy in Qatar and Statoil-Iran.

Position: Sr. SERVICE REPRESENTATIVE
Company: COOPER CAMERON CORPORATION
Country: UNITED ARAB EMIRATES
Year: Sep 2000 – Sep. 2003

: Three years worked with ADCO,ZADCO,ADMA,BUNDOQ mainly on Cameron, WKM, McEvoy, Ingram Cactus,Demco,
Willis, Thornhill Craver, Surface/ Subsea, Equipment. In addition worked in Bahrain, Oman Iran and Pakistan, mainly working service for all customers in these countries. Short term held position deputy service manager increasing service revenue.
However, I was directly involve in Cameron sales group and occasionally with tendering team.

Position: SALES/ SERVICE REPRESENTATIVE
Company: COOPER CAMERON CORPORATION
Country: QATAR
Year: Sep 1996-Sep.2000
Duties Installing and maintaining all types of Cameron conventional compact wellheads, mudline suspension system and sub sea completions. Directly working in partnership for Qatar Gas, (Mobil-Total), Ras Gas (Exxon-Mobil), OXY, Qatar Petroleum, and Pennzoil). Major achievement at that time was installation of premium SSMC compact wellhead system on largest single gas field in the world; hence fully involved in supporting Cameron Doha sales team.

Position: SERVICE REPRESENTATIVE
Company: COOPER CAMERON CORPORATION
Country: UNITED ARAB EMIRATES
Year: Sep 1995-Sep.1996
Duties: Working with Cameron as Service Engineer. Implementing installation and maintenance for all type of Cameron wellhead and BOP's for mayor oil companies and drilling contractors in UAE, besides that worked on assemble floor in Sigma Enterprises

Position: DRILLING ENGINEER
Company: SPERRY SUN- DRILLING SERVICES
Country: DUBAI, UAE
Year: April 1993-Sep 1995
Duties Drilling Engineer working on Directional Drilling Tools ie MWD, LWD and FE tools. While working for Sperry Sun I received intensive training for Directional Driller, In addition to that I was working on planning directional drilling wells. Mainly my initial responsibilities were to build DD tools, as such: mud motors, jars, adjustable stabilisers, shock tools and multi-lateral tool, at the same time I was working on maintaining and servicing MWD and FE tools. Later on, I assisted and followed directional driller for first directional well with
4-3/4'' short radius mud motor in UAE (Amoco Sharjah), as well as I was involved in operation for building the first coil tubing directional well with 1'' mud motors in UAE. (Amoco Sharjah). However at the same time I was fully engaged with assisting Directional Drillers who were working and looking after Dubai Petroleum Company (DPC) and ADCO Abu Dhabi.

Position: Coiled Tubing Operator. Well Testing Operator.
Company: UAE- OIL FIELD SERVICES
Country: U.A.E.
Year: April 1991-April 1993
Duties:: Mainly working as Coiled Tubing Operator. Well Testing Operator in
U.A.E. Also maintained and worked on all kinds of completion tools manufactured by: Macco (Sub Surface Safety Valves, Gas Lift
Valves), Arrow-Oil Tools (Completion Packer-s), and
Az-Grand Products ( Pack Stack, Wipe Stack and Drilling Tools).
.

Position: DRILING ENGINEER
Company: YUGO PETROL MONTENEGRO
Year:: Nov 1987-Jan 1991
Country: Former Yugoslavia. Currently Montenegro
Duties: Assisted supervision work on Jack up drilling rig (Panon), then assisted supervision on land rig drilling well JJ-1, after that assist supervision for well JJU-1 in South Adriatic Sea. At this period of time I received intensive drilling training from major national oil companies INA and Nafta Gas.

Educational Background

Month/Year

Nov-1987 BS Degree, Petroleum Engineering

Month / Year Certificate

Professional Petroleum Engineer certificate
February 1988: Completed professional exam in Turbo
Drilling Zagreb, Croatia 1988, and became Professional Petroleum Engineer.

May 1988: International Well Control School: -
Drilling Supervisors level Well Control
School. Zagreb, Croatia.

March 1988 thru July 2008: Drilling Courses and Training:-
INA-NAFTAPLIN, Zagreb Croatia

July 1989: Drilling Courses and Training:-:-
NAFTA GAS, Novi Sad, Serbia

April 1991 thru Jun 1991: Well Completion Courses:-
ADMA –OPCO and ADCO
Abu Dhabi UAE

Nov-1993: Directional Drilling Courses:-
Sperry Sun Dubai UAE

May-1996: International Well Control School:-
Attend Well Control school supervisors level
Cameron Houston.

May-1996: Cameron training courses and school:-
Houston Texas
Surface Wellhead Engineering.
Divisional Quality.
Engineering Standards.
Gate Valve and Choke Engineering.
Drilling Engineering.
Controls Engineering.
Project Management.
Purchasing Department.
Manufacturing and After-Market Department.
Safety and Environmental Department.

Sep-1996 Cameron training courses and school:-
Liberty Texas
Shipping/Receiving Department.
Assembly Floor.
Welding.
Inventory Control.
Drilling Engineering BOP'S (Pit Crew)
Purchasing.
QA/QC. Scheduling.
W.H. Engineering.

Nov-1996 Cameron training courses and school:-
Paterson Louisiana
Cameron Mud Line System, WMSW. WMSWI-Sub-Sea. Completion Courses. Single Trip Metal –STM10 and Single Trip Metal – STM15.

Jan2007 thru Dec 2008 Crestcom's Bullet Proof Management courses
Ho Chi Minh City Vietnam.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 7040)

Go to Search Parameters...

Brief Description

MS in Petroleum Engineering, 20+ Years experience as Reservoir Engineer. Skilled in Reservoir simulation, Field Development Plans and Well & Reservoir Management.

Sailed for lasat 18 years on board Chemical, petroleum, OBO and Bulk carriers. Extensive experience on drydocking and repair yard. Completed conversion of a ship to FSO at Keppel Shipyard.

I have 18 years experience in Oil & Gas Industry.Experience in completion execution: Completion activity and workover operation, Well Testing (Oil / Gas), Gravel Pack, Gas Lift, Submersible Pumps, Perforating Technique, Well Stimulation (Acid / Frac), Cement Squeeze Operation.

Well-developed interpersonal skills.

Senior Process and flow assurance engineer with full project cycle experience.

I am a licensed Canadian engineer with M.Sc. degree and 28 years experience in Instrumentation & Control Systems (DCS&PLC) design, instruments specification (InTools), purchasing, commissioning, start-ups, maintenance, and training. In past twelve years I worked with major EPC offices in Calgary

Piping Stress Oil/Gas, Off/Onshore, FPSO's and Nuclear - Caesar,Autopipe and PSA5

I am Petroleum Geologist with +20 years experience in subsurface projects. These experiences cover mostly production geology, drilling operations and a few exploration projects. I was also involved in heavy oil projects, including drilling operations, well geostering and geocelular 3D geologic model

Experience 14 years in Refineries (Fuels & Lube) as a Process Engineer to Technical Services Manager in India. 9 years in KNPC as a Process Design Engineer, in Project Department, implemented minor and major projects in 3 Refineries. 3 years in EPC Company, Canada, Designed SAGD utilities and SRU.

Over 30 years experience in Oil and Gas Petrochemical Industries onshore and offshore in the UK and overseas. Experience gained on various onshore projects, i.e. Power Plants, Chemical Plants, Pumping Stations, Alumina Plant, and Petrochemical Refineries ;BSc Mech. Eng..

Free! I am an International Sr. Well Engineer with a wealth of worldwide experience and knowledge. I have a Petroleum Engineering degree and 27 years in the industry. I want to continue to contribute to the technological challenges of the energy arena, particularly offshore, subsea and deepwater.

Over 25 years of international oil/gas industry experience as a professional Geologist, I worked on Africa, Middle East, Canada, North Sea, India, Kazakhstan, Trinidad & others. Proven track record in geological exploration & development venues: prospect generation, new ventures andplay fairway

Drilling exploration production, per cv below

B.E. (Mechanical) - 1980

Petroleum Engineer with 26 years of professional experience mostly in Production Engineering. Spanish and English fluent speaker. Artificial lift, workover and well service recommendations. Well Completion programs. Well testing. Field Evaluation and Production Optimization.

30 + year mud engineer, experienced in all phases of drilling fluids & BOP.

I have more than 17 years experience in exploration and development domains. During my career, I have explored for hydrocarbon in the Algeria sedimentary basins. North Sea Norwegian sector, Libya and now I`m working in Canada for Fugro-jason.

23 YEARS EXPERIENCE IN PETROCHEMICALS -PROJECT , OPERATIONS ,ERECTION ,COMMISSIONING

Seasoned and versatile process engineer (Oil & Gas, Refining) seeking a Process Engineering position that utilizes my analytical and communication skills to enhance organizational growth and profitability.

Project management, Coordination with End User/ Vendors/Contractors/Consultants, Progress monitoring& reporting, Supervision, Quality/Safety assurance and Tender documents

Professional API 510 and AWS CWI Inspector

With thirty years experience in the workforce in industries such as oil & gas, mining, fabrication/construction, and marine engineering, I have a very strong mechanical aptitude in all disciplines and a strong commitment for OHSE having started with my apprenticeship as a Mechanical fitter/1st class

Petrophysicist

Over 15 years of experience in Instrumentation Engineering, Procurement, Construction, pre-Commissioning and commissioning of projects

Highly skilled and experienced Sr. Drilling Engineer, experience with land/offshore (including deepwater), having worked as Drlg Engineer through Drilling Engineering Supervisor for a large scale GoM deepwater developement project.

20 years experience in drilling/work

Engineering design, offshore and onshore pipelines and facilities, Report writing DBM, FEED, PEP

Production chemist involved in oil & gas flow assurance, development and validation analytical operating procedures, reliability plant engineering

B.E.(Mechanical); 22 Years total Industry Experience; Served with SABIC, Reliance, SPIC & Shell;

More than twenty (20) years experience in the field of Engineering Construction in

A professional, well-qualified MECHANICAL ENGINEER with extensive project management experience in the oil refining, gas, LNG/LPG, petrochemical and associated industries.

Senior Plant Inspection Engineer. Mechanical engineering graduate with 29 years of experience in Oil/ Petrochemical industries loking after Process Plant Inspection, Materials Inspection, NDT, Corrosion, Failure Analysis, Fabrication/ Welding inspection in running plants + new grass root projects.

Geologist, Heavy Oil and Oilsands. Experienced consultant, prospect generator, horizontal well planner for thermal and CHOPS applications.

I have 22 Years of experience in the Detailed Design and Engineering in the areas of Plant Design & Piping for Oil & Gas, Petrochemical, Chemical and Power Projects. I am presently working as a Head Piping.

With 20years O&G experience, my main experience has been on major projects during design. I have experience within Operations, Construction and Commissioning and also worked on site; offshore, pipeline construction and FPSO shipyard construction. I have Australian and British Citizenship.

Dedicated professional in Exploration and Production with 27 years experience working for the two largest major Oil Services Companies. Strong engineering background in Drilling and Completion Fluids as well as Drilling Waste Management through years of focused operational management.. Strong engi

Drafter & Designer experience in estimation and designing of transmission lines and poles. Facilitated department meetings for administration of projects. Have worked the industry for twenty-five years and have obtained a Bachelors of Science degree in, Business Administration. Ability to prioritize

Profile: A Specialist Seismic Interpreter with over 15 years experience in Oil & Gas exploration, in seismic interpretation and prospect generation. Having the ability to supervise seismic processing and acquisition activities and take on role as a Project Manager. Confident in ability to cont

Working with Transocean as a Drilling Manager in Integrated services Project started for 5 Jack up rig for Bombay High field with client -ONGC. Operation commence in Jan 2007.

Drilling Engineer offshore tender rigs jackups onshore land rigs

process engineer

a senior instrument & Controls engineer

Sr Piping Designer Oil & Gas 3D model

Senior Planner with more than 20 years experience in Oil & Petrocehmical Industries

Qualified professional Project Manager and licensed US chemical engineer, with 32 years oil and gas and refined products production and processing facilities, pipelines, stations and terminals.

Piping Engineer/Designer

Presently working as Drilling Manager with Transocean started up the project in India for 5 Jackup rig for ONGC along with Tony Flynn who was than our GM -Integrated services in May 2006. Direct responsibility is managing T12 and JTA ( 300' Jackup)on day to day coordination, planning and execution

AutoCAD drafting, Drawing, Painting (Acrylic, Oil, Water Color), Airbrushing, Faux Finishing, Murals, and Computer Graphics /Illustrations. Software: Adobe Illustrator, Adobe Photoshop, Adobe Streamline, Adobe 3D, Flash, Fractal Painter, Quark Xpress, Microsoft Word, Power Point and various scanning

Instrumentation, Control and Safety Systems Design Engineering - Projects

A Professional Engineer with over 18 years' experiences in Process Control Systems for the design, development & implementation of process control applications, oil storage, movement & blending applications and process training simulations. Extensive knowledge in Honeywell Distributed Control System

First 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out