Resume - 25 years of experience in construction, installation, commissioning, testing and...

Misco Jobs

Resume #78254

CONTACT INFORMATION:
View contact information...

P6) Educational Qualification: Bachelor of Science in Electrical Engineering
Calicut University
7) Experience: More than 25 years in the installation, commissioning, testing, operation and maintenance of electrical, electronic and instrumentation equipments and controls in Processing plants and Drilling Rigs in India and Middle East.
8) Plants to which self associated during construction and afterwards maintenance:
Co-generation, Gas sweetening, Due point depression, LPG recovery,
Fractionization, Sulphur recovery, Product terminal, Cooling towers, Various sub- stations, Water treatment plants, Loading gantry etc.
9) Electrical power and distribution system and major equipments handled:
a) 19.2 MW Gas turbines of GE make (Model # PG 5361-P) and Generators of
Brush make (Model # 193-7 R) and Mark # 4 controls of GE with distributed digital controls and requisite PLC.
b) 66 KV double circuit grid back up from state board with outdoor receiving switch yard, 66/11 KV grid transformers of 25/31 MVA, 66 KV relay and control panels, summation metering etc.
c) 11 KV switchgear and distribution system with synchronization. and 11/0.433
KV transformers of 500 KVA to 1600 KVA.
d) HT/LT drives: HT motors (6.6 KV) of varying capacity from 150 KW to 1700
KW, both synchronous and induction for such applications as residual gas compressors, Air blowers etc; from different manufactures like Siemens,
Jermount, Large machines, Toshiba, Hitachi etc.
e) MOCBs with protection such as IDMT O/C and E/E, directional IDMT O/C, directional EF, UF associated with UV, inverse time O/C with instantaneous
EF, transformer differential, voltage restraint UC etc.
f) UPS, battery banks, battery chargers, 110 DCDB, smoke and fire detectors, cathodic protection, lighting, overhead cranes, office and workshop buildings, centralized air conditioners, cooling appliances etc.

10) Major responsibilities and activities:
a) Associated with turnkey project in detailed discussions to continuously evaluate and improve design parameters and materials with the objective of achieving maximum standardization.
b) Receiving and handling of equipments and materials and assuring quality, local and international statutory requirements and designed rating.
c) Co-ordination with other departments and sub-contractors so as to adhere to the time schedule, thereby reducing delay and cost in the completion of the proposed work and to gather all relevant information for documentation d) Associated with all important testing, calibration, relay co-ordination to ensure power system stability, regulation, reliability and redundancy.
e) Monitoring and reporting of daily progress of overall project implementation.
and having group discussion with various agencies involved, identifying constraints and setting priorities.
f) Planning and deploying in-house man power for round the clock operational requirement and providing required training to them.
g) Evaluated the technical standards, capabilities and the availability of in-house personnel and entrusted the low technology routine maintenance to external agency. Analyzed the local labour market and the frequency of maintenance activities, formulated terms and conditions based on the prevalent rules and standards, tendered, wetted the tender technically and financially and awarded and supervised the all in all maintenance contracts for electrical equipments.
h) Developed preventive maintenance schedule according to the failure analyses,
MTBF etc; and improvements were carried out on a continual basis, formats were prepared for monthly, half yearly and annual maintenance with permit to work, proper locking out and tagging systems.
i) Ensured the availability of consumables and spares and evolved an annual purchasing policy and coordinated with equipment resource group for the availability of critical spares just in time.
j) Planned in advance and mobilized resources and additional manpower for turn-around jobs.
k) Interacted with the condition monitoring group to carry out predictive maintenance based on the recommendations like premature bearing replacement, correcting the balancing of rotating parts, torque level of foundation bolts and permissible tolerances of alignments.
l) Proposed technical modifications and innovations to enhance the reliability and executed the jobs.
11) Placing and promotion history:
a) Joined Oil & Natural corporation of India as Asst. Executive Engr. in 1982, then Exec. Engr. in 1987 and Dy. Supdt. Engr. in 1991, the last being merit promotion superseding 90 such engrs. in the field. Apart from construction, operation and maintenance activities in Hazira Gas Processing Complex,
India, the highest responsibility held was as Area in charge (Elect) for an entire drilling field deployed with 9 rigs.
b) From 1994 onwards with various drilling companies in Middle East as
Preventive maintenance Engr. At rigs worked with Cater pillar Engine controls, GE/CAT/KATO Alternators, Ross-Hill, Hill Grahams, GE etc; AC-
SCR DC drives, VFD with PLC for top Drive, Javelin pipe handling systems,
Intellysis controlled compressors, Scott quadranetic Gas detection system and associated instrumentations.
12) On the job training in inter personnel and technical skills:
a) Maintenance Management by Indian Institute of Management, Calcutta, India.
b) Reorientation course by Continuing Education Department, University of
Roorkey, India with specialization on sub-stations and power electronics.
c) Participative Management d) Total Quality Control e) Career Linked Leadership Quality in Management
(The above three programmes by Institute of Management Development,
ONGC, India.)
f) Electrical Safety by National Safety council, India.
g) AC-SCR Rig Electrics by IDM Controls, Texas and Bharat Heavy Electrical
Limited, India h) Permit to Work, Breathing Apparatus, First Aid etc; by National Institute of Training, Sultanate of Oman.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 7051)

Go to Search Parameters...

Brief Description

A production/well completion engineer with over 20 years experience in Canada and overseas

I have Very good Experience in the Petrophysical Operation, Studies and Well reservoir Survillance. Have experience in QC/QA of integrated studies. Have leadership experience

Geoscientist

Honor degree in Mechanical Engineering form UK and have gained more than twenty five years experience in the fields of major sub-sea assets management, assets integrity, offshore operations, projects and contracts management, inspection, maintenance and marine related projects.

Multi skilled engineer, Technical Advisor, Mud Engineer

15 years Mechanical Engineer within Oil / Gas & refinery industry, inclusive 5 years maintenance experience; 5 years for nuclear power project; P.Eng of APEGGA, Canada

Can perform both technical work and sales work involving oil/gas industry more specifically as an advisor, planner, support or salesperson.

Drilling Engineer – DCWO planning, programming, engineering, operations evaluation, performance analysis; deep HPHT gas wells, high deviated, ERD and horizontal oil wells, sidetrack wells; land operations; harsh desert (Middle Asia) and arctic (Siberia) environment; English-Russian-Slovak

Senior Mechanical Engineer experienced in detailed mechanical / thermal / process and E&I design of Fired Heaters, Reaction Furnaces, Reformers, SCR’s WHRU’s, Boilers, Incinerators, Flares and associated ancillary equipment. Very strong E&I, DCS / PLC & BMS skills.

By working 17 years in the field of petrochemical field, I experienced all kinds of key projects like FCCU, Hydro-cracking unit, Hydro-treating unit and have expert ability to do piping static and dynamic stress analysis. Also I have five years working experience as a mechanical engineer in refinery

35 years of experience in the process industry working for engineering firms, equipment manufacturers, chemical company

Conducting a piping training program from zero skill up to a skill trainees supervising the assigned work from planning, organizing, leading and controlling. Performed piping work activities from designing and drawing the piping tie-in to existing pipelines, drawing various structural platform

Twenty years of professional experience in, design, consultancy, construction and maintenance, covering a broad range.

25 years of experience in construction, installation, commissioning, testing and maintenance of Electrical, Electronics and Instrumentation equipments and controls in Petrochemical Industry

Have more than 20 years experience in Piping Design and Engineering including Stress Analysis and Piping Materials Control for various projects in petrochemical plants, refineries and commercial chemical plants. Presently working in Worley Parsons (Colt Engineering Corporation), Calgary, Canada

Overview: Thirty (30) years of engineering management experience, 25 years of which were in the oil, gas and shipping industry and EPC projects that include the following: Project management, conceptual, feasibility studies, detailed design engineering, procurement, constr. and commissioning

Over 18 years experience in 2D and 3D seismic data processing. Processing land desert and mountain data. Processing experience gained in Geofizyka Krakow Ltd, WesternGeco and CGGVeritas. User knowledge of Unix, Linux , excellent Omega SPS and Tango, basic ProMAX. Good MS Office skills.

Advanced Process Controls, RealTime Process Information Systems, LIMS

PROJECT MANAGEMENT, CORROSION & MATERIALS,INSPECTION & INTEGRITY ENGINEER/MANAGER

More than eighteen years of experience in premium International Oil and Gas Engineering Consultancy Companies within the field of Process Safety, Technical Safety and Loss Prevention.

well services, production technology, safety, beam pump

Licensed Professional Engineer, performance oriented, with extensive broad-based experience in multidisciplinary projects. Particular expertise in Instrumentation and Control Systems Engineering for Chemical and Oil & Gas Industries. Supervision of complex detailed Engineering and Procurement.

Reservoir Geologist  To perform characterization Reservoir integrated Studies and reservoir Modeling. Generation and evaluation Geological Prospects and development opportunities. Elaborate Exploitation Plans. Planning (targets) and monitor of Special Wells. Volumetric reserve estimations.

Primavera, MS Project, MS Office, EVMS, Planning

Versatile technology professional with expertise as a Senior Reservoir Engineer and Operations Business Manager. Resourceful problem solver who performs well under pressure. Outstanding leadership, organizational, and communication skills. Granted Top Secret Security Clearance. Analytical.

More than 13 years of multi-international reservoir engineering experiences in gas and oil developments from sandstone and carbonate in land fields and offshore,including different stages of appraisal and development planning & management, well test, reservoir characterization & simulation, economic

SmartPlant 3D/P&ID Application support

I wish to apply for suitable position in the highly motivated & challenging environment. I am having 21 year of experience in different fields of Gas, Petroleum and Chemical industries. Also involved actively involved as an engineering material coordinator. I am having experience in identifying

More than 20 years experienced in project design services which involved mechanical and piping design preparation of conceptual design packages and detailed design packages, specification of pipes, fittings, valves and other specialties. Developed specifications for pumps, steam turbines, tanks, pre

A total of 15 years of professional work experience, (9) years in the Gulf region, of which seven years Were in the oil/gas, petrochemical, power/desalination plant and building construction projects. A Computer literate and proficient in oral and writing English communication skills.

Geophysicist position in a oil-field services company. I have more than 18 years of seismic data processing and data management experiences.

Welding Inspector, CSWIP 3.2, ASNT-II Certified, 18 Years working experience in Oil and Gas Industries in various countries.

Has 20 Years Expeierence in various aspect of Control and Automation and last 7 years in Middle East with ABB /Invensys. Has done large projects and several latest DCS/ESD systems such as Triconex,ABB infi90 , Foxboro I/A , Honeywell TDC3000 etc

I am qualified Degree chemical Engineer from the reputed Maharaja Sayaji Rao Uni, Vadodara

I’ve total of Eighteen (18) years experience in the area of Pipeline design and Piping design for oil & gas and petrochemical projects.

Over 30 years and broad range of experience in oil and gas exploration. Bachelor degree Geophysics/ Geology and MSc degree in Geophysics. Worked in most aspects of exploration, such as seismic survey planning, acquisition, data processing, interpretation, AVO, seismic attributesand seismic inversion

Expertise in gas sweetening, gas compression, gasification process, and U&O facilities.

Over 16 years experience as Electrical Engineer

I have been a Process Engineer for 16 years. My experience includes process design of oil, gas and petrochemical plants and steam and power generation units, expertise in conceptual design, basic design, FEED and detailed engineering, experienced also in optimization and troubleshooting projects.

Over 20 years experience in chemical, petrochemical and oil&gas industry.

Presently working as Sr APC & Opt Engineer in Qatar Petroleum Refinery. A total of 20 years experience in Petroleum Refinery industry (8 years in APC & Opt, 5 years in Technical Services and 7 years in Operations).

I have extensive experience in Oil&Gas industry and EPC, I have extensive experiencey in Rotating Equipments Design and I worked in a refinery in Egypt as the Head of the Rotating equipments for 14 years.

Having achieved many goals in my long career how MECHANICAL ENGINEER, I am interested in continuing my professional horizons by working as a FLEXURAL STRESS AND MECHANICAL PIPING DESIGN AND LEADING MECHANICAL ENGINEERING PROJECT for your respectable company.

Have about 25 years of experience in logging operations (Open hole, Cased hole and Production Logging Services) and interpretation of well logs (Open hole, cased hole and Production Logging)

To provide technical expertise of piping, mechanical engineering for Oil & Gas, Petrochemical, Power plant. Support to projects management, Supply division and projects controls through all phases of major and minor projects

Process Design Engineer with experience o fEPC contracts in Saudi Arabia. I also have expereince in operating plants, providing plant support. I am currently working as Technical Manager of 20 process engineers, doing small projects execution for Sasol Infrachem Utilities.

Seismic interpreter and reservoir geophyscist with experience in reservoir modeling, geostatistics and rock physics

An experienced Control & Instrumentation Engineer with extensive achievements in leading, designing, executing, and organizing project activities for process industries, e.g. oil/gas refineries, chemical/petrochemical complexes, Power plants, steel and copper industries.

Accomplished PLC, HMI, automation, programmable controls specialist

A Production Engineer with over 25 years of oil and gas field experience in domestic and international operations. Solid record in building project teams in multidiscipline and multilingual work groups. Strengths include planning, organization, and communication.

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out