Resume - 17 years experience in EPC environment, on oil refineries and petrochemical proj...

Misco Jobs

Resume #78426

CONTACT INFORMATION:
View contact information...

OBJECTIVE: Mechanical Job

PROFESSIONAL PROFILE

* 17 years experience in EPC environment, on oil refineries and petrochemical projects
* 17 years detail design experience include reactors, coke drums, columns, drums, heat exchangers, air coolers, platforms, ladders and various internals
* Theoretical calculation and data analysis for designing Pressure Vessels
* Field Erected Tank include issuing Work Package, updating Datasheets, reviewing Vendor Prints, and co-ordination interface with disciplines
* Used HTRI to re-rating the existing heat exchangers for new design conditions
* Familiar with ASME VIII – div. I, API 650 and TEMA
* Feasibility studies and cost estimates
* Licensed Professional Engineer in Alberta
* Ability to use Compress, FE pipe, HTRI, Bjac, Windows, Word, Excel, AutoCAD R14
* Very good team player, problem solver, project orientated and quick learner

CAREER HISTORY

Senior Mechanical Engineer
Bantrel Co., Canada
Petro-Canada, Horizon, Montreal, QC Jan 2005—Hitherto
* Responsible engineer for the coke drums, columns, vessels and one field fabricated Tanks.
* Manages specifically assigned project deliverables
* Presents design issues to client and suppliers,
* Leads or participates in technical review meetings for conflict resolution.
* Reviews and checks work of subordinate engineers.
* Issued specifications and material requisitions for coke drums, columns, vessels
* Co-ordination interface with engineering disciplines and procurement and vendor coordination

Petro-Canada, RCP Project, Edmonton, AB
* Responsible Engineer for the coke drums, vessels and one field fabricated Tanks.
* Managed specifically assigned project deliverables,
* Presented design issues to client and suppliers,
* Reviewed lessons learned data base for suitable application to tasks.
* Issued specifications and material requisitions for vessels.
* Co-ordination interface with engineering disciplines and procurement and vendor coordination.

Mechanical Engineer Jan 2001—Dec 2004
Bantrel Co., Canada

Project: EDD Project, Petro-Canada, Edmonton, Alberta
* Responsible Engineer for 5 Vessel Material Requisition
* Issued Vessel Material Requisitions and datasheets
* Bid evaluation and pre-award meeting
* Reviewed Vendor Prints
* Co-ordination interface with engineering disciplines and procurement
* Vendor Co-ordination

Project: Phillips ULSD / Strategic Revamp Project, SFAR-RODEO Refinery, U.S.
* Thermal designed Heat Exchanger
* Prepared Heat Exchanger Material Requisitions and datasheets
* Bid evaluation
* Reviewed Vendor Prints
* Co-ordination interface with Vendors, engineering disciplines and procurement

Project: Athabasca Oil Sands Downstream Project, Shell Canada Ltd., Scotford, Alberta
* Issued Work Package and updated Datasheets for 23 Field Erected Tanks
* Reviewed Vendor Prints for 23 Field Erected Tanks
* Issued MRQ for vessel
* Co-ordination interface with engineering disciplines and procurement
* Vendor Co-ordination

Project: Phillips ULSD / Strategic Revamp Project, SFAR-RODEO Refinery, U.S.
* Used HTRI evaluating the new design conditions for existing heat exchangers
* Equipment Evaluations
* Discipline Interface Co-ordination
* Vendor Co-ordination

Project: Suncor STF Hydraulics and P&ID Integration, SUNCOR ENERGY INC. Alberta
* Used HTRI re-rating the new design cases for one existing heat exchanger
* Generated technical report for mechanical and thermal evaluation of this heat exchanger

Mechanical Engineer 1997-2000
Sinopec Beijing Design Institute, China
Project: Lube Oil Hydrofinishing Unit (200kt/y)
* Theoretical calculation and data analysis for designing 10 columns and a hydrogenating reactor (Dia: 2.2 m; Wall-thickness: 108 mm; Design Temperature: 420 ºC; Design Pressure: 14 MPa; Height: 28 m; Weight: 215 T; This reactor built to ASMEVIII—Division II)
* Determined materials based on operation parameters set by process engineers and economic factors
* Theoretical calculation use ASMEVIII Division I and Division II, compare the results, and determine to use ASMEVIII Division II
* Theoretical calculation thickness of shell, spherical head; seismic calculations, wind calculations; calculate support skirt; skirt base ring, anchor bolts, flanges, opening reinforcements, support beams of internals
* Structure/mechanism research for the components and internals (such as trays, distributors)
* Made the specifications for fabrication, inspection and acceptance
* Detail design the reactor
* Checked design of 8 columns done by other engineers

Junior Mechanical Engineer 1992-1997
Sinopec Beijing Design Institute, China
Project: Hydrogenating Molecular Sieve Dewaxing Technical Reform
* Conducted feasibility study and cost estimates
* Scheduled and time control
* Theoretical calculation and data analysis
* Designed a TEMA DFU Type shell heat exchanger, high pressure heat exchanger & a tower
* Inspected manufacture in fabrication shop

TRAINING

Business English Program (10 weeks)
HTRI Workshop (2 Days)
HTRI Workshop (3 Days)
Design and Fabrication of Pressure Vessel ASME Section VIII, Div. 1 (3 days)
Coke Safety Training (By www.coking.com) (4 days)
FE pipe Work shop (3 Days)

EDUCATION

Bachelor of Mechanical Engineering: Major in Chemical Equipment Machinery
University of Petroleum, P.R. China 1991

References Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 7051)

Go to Search Parameters...

Brief Description

Offering more than Fourteen years of Experience in Marine, Offshore, Oil & Gas Industry with a wide variety of projects involved in Electrical & Instrumentation Disciplines. Acquire extensive knowledge in a broad range of Computer programs & other Various E & I Engineering Field

Instrument / Controlsystems Engineer

Geologist geophysicist interpretation

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

To obtain a challenging position with an engineering firm where I can use my relevant skills and experienced as Interface Design Coordinator / AutoCAD Supervisor and be a contributing member in the growth of the company. Willing to work as a key player in challenges where I can put my committed atti

I am capable of achieving organisation¡¦s objectives and organic growth through effective contributions. I have over 13 years of experience in the areas of Health, Safety & Environment Management

Maintenance Supervisor/Security, Maintenance Supervisor I/C, Project Manager, I/C Technician

20 years fire fighting experience.Now working in ADNOC Off Shore facility

Having 23 years of sound experience in piping and equipment design for Onshore / Offshore Oil and Gas, Petrochemical and Chemical Industries.

24 Years of experience in Piping/ Pipeline Design Engineering for Oil & Gas of Onshore and Offshore facilities.

Structure designer is make development basic design from engineer to make engineering drawing with make details, sections, connection types and discuss with other department like piping, civil, mechanical etc to make problem solve in engineering design or site.

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

More than fifteen years Experience, working with consulting engineering companies in Iran and Canada, with different assignments in variety of projects including EPC, R&D, master planning and feasibility studies

I am a professional process engineer with over 15 years experience

Free! Health, Safety & Environment Manager - Crane Inspector - OHSAS 18000 Lead Auditor - Senior Trainer - HSE Master Degree

Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience

A highly competent Senior Electrical/Instrumentation Engineer who has developed supervisory capabilities; QA / QC inspection skills; installation maintenance expertise; pre-commissioning, testing and commissioning competence; safety awareness; organising and co-ordinating flair; fault-diagnosis

More than 28 years of experience in oil industry

22+ years solid background of Piping Design in the petroleum contracting industry, covering all aspects of design activities

Experienced Completing and Producing Petroleum Engineer

Quality control,Quality Assurance,Inspection,Project Engineering,Surveillance coordinator

ASNT LEVEL 3 /WELDING PAINTING LIFTING I NSPECTOR

Enquiry specs for compressors, turbines, pump, blowers etc. , technical evaluation of bids, preparation of technical recommendations, checking & approval of vendor documents., interface with other disciplines, knowledge of API standards

17 years experience in EPC environment, on oil refineries and petrochemical projects

INSTRUMENT FIELD ENGINEER

Senior Corrosion Engineer with 14 years experience at metallurgy fields especialy corrosion & corrosion control. expert at painting, insulations,cathodic protection, materials selection, corrosion inhibitors, corrosion monitoring, coatings inspection . I am serious at work.

As a well sit geologist for six years, including one year for Coal Bed Methane, familiar with StripLog, SDL_9000 geological logging software, strong organization ability

Electric Engineer with MSEE with more than 15 years of work experience in oil and energy industry, occupying positions in electric maintenance, utilities plants operation and project engineering management and construction,

I am a postgraduate in civil engineering from the prestigious Indian Institute of Science, Bangalore. My major experience is in Oil industry. I have vast experience in Contracts Management in India & abroad.

Estimation of Oil and Gas EPIC Projects

Senior Electrical Engineer currently working For SonaHess Company (association Sonatrach & Amerada Hess), El gassi Hassi Messaoud.

• 12 years of experience in geology, geophysics and reservoir engineering, drilling operations (including horizontal, ubd, rotating BOP etc)

Mechanical Engineering graduate with experience in EPC - procurement manager

Experienced in sweet and sour, oil and gas projects. Execute projects on time and on budget while working as a team player. Solutions oriented with an eye toward bottom-line results. Organized multiple projects concurrently, with successful results in a fast paced environment. Effective communicat

Instrumentation Engineer

I'm Technical Degree in Geology (Associate Degree in Geology) and I'm looking for a job as Mud Engineer Worldwide.

In addition to my graduate engineering degree and more than 15 year of experience in power generation and chemical plants. I have currenly done my MS in Total Quality management.

Senior rotating equipment with 12 years experience with sound knowledge of project engineering and project management

B. Tech. (Electrical Engg.) from Rajasthan Vidyapeth (Deemed) University, Udaipur.

KEY COMPETENCIES

A highly skilled Petroleum Engineer with over 20 years domestic and international experience in Petroleum Industry as a Petroleum Engineer, experience in reputed International Service Company

Graduate in Mechanical Engineering having 15+years in Static Equipments & Packages Design & detail engg. engaged in Design & detailed engg. of pressure vessels, Columns for Oil & gas Applications and all other types of static equipments & packages, I have a good exposure in EPCM

Lead/Senior Mechanical Engineer- Oil & Gas, Chemical, Petrochemical and Energy Industries

Free! Oil and Gas Industry onshore construction civil engineering Superintendent with 20 years experience in overseas projects.

Twenty plus year's progressive experience in heavy industrial design, development, and construction for petrochemical refineries, upstream petrochemical, waste water treatment, power generation, chemical demilitarization facilities, Microchip facilities, LPG gas transitions, and the food & beverage

I am very talented and a hard worker. I have a good eye for any type of construction.

First 1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out