Resume - 15+ years of experience

Misco Jobs

Resume #78430

CONTACT INFORMATION:
View contact information...

OBJECTIVE Senior Civil/Structural Engineer

QUALIFICATIONS * 15 years of solid experience in engineering design and construction of steel and concrete structures.
* 9 years of experience in designing pipe racks, equipment platforms and pump stations, technical buildings for Oil and Gas large projects.
* Extensive experience with AutoCAD (from R14 to 2007) Structural drafting, 3D
solid modeling.

SKILLS RISA 3D Structural, Structural office (S-Frame, S-Steel), SAP 2000, STAAD Pro,
MathCAD, TEDDS, AutoCAD R14-2007, Rebis AutoPlant Structural 3D, Pro-Steel 3D, Corel Draw.

EDUCATION

6/1993 Engineering Faculty, Space Engineering Military Academy, St-Petersburg, Russia
Master degree in Civil Engineering

4/2000 CAD&GIS Academy, Moscow, Russia
Rebis 'Structural 3D' Training Seminar

2/2004 SAIT, Calgary / Alberta
Upgrading and certification program

12/2005 University of Calgary
Engineering Economics

EXPERIENCE

03/2007 – present Senior Design Engineer, Colt - Worleyparsons, Calgary/Alberta
Projects: Suncor Pipeline

Duties and Responsibilities:
* Structural analysis and engineering design for pipe-racks, pipe supports, cut-walks and access platforms, technical buildings.
* Design and calculation of piled and concrete foundations for vertical and horizontal vessels, equipment modules, technical buildings.
* Preparation of the scope of supply of construction materials for buildings and equipment modules.
* Participation in the project meetings.
* Man-hours estimation.
* Participation in the development of project schedule.
* Daily communication with a different disciplines.

11/2006 – 03/2007 Senior Design Engineer, Fluor Daniel, Calgary/Alberta
Projects: Husky Oil HLU Expansion Project (EDS)

Duties and Responsibilities:
* Structural analysis and engineering design for multi-level pipe-racks, equipment platforms, cut-walks and equipment skids, multi-level heat exchanger structures, technical buildings.
* Design and calculation of piled and concrete foundations for vertical and horizontal vessels, equipment modules, technical buildings.
* Site inspections with control measurements and sketches.
* Preparation of the scope of supply of construction materials for buildings and equipment modules.
* Participation in the project meetings.
* Man-hours estimation.
* Participation in the development of project schedule.
* Daily communication with a different disciplines.

11/2004 – 11/2006 Structural Engineer, Colt Engineering, Calgary/Alberta
Projects: Devon Jackfish (SAGD), Suncor Voyageur Hydrotreaters

Duties and Responsibilities:
* Structural analysis and engineering design for multi-level pipe-racks, single-frame pipe-supports and tee-posts, equipment platforms, cut-walks and equipment skids, multi-level heat exchanger structures, technical buildings.
* Design and calculation of piled and concrete foundations for vertical and horizontal vessels, equipment modules, technical buildings.
* Site inspections with control measurements and sketches.
* Preparation of the scope of supply of construction materials for buildings and equipment modules.
* Participation in the project meetings.
* Man-hours estimation.
* Participation in the development of project schedule.
* Daily communication with a different disciplines.
* Studding of the Canadian and Alberta's Standards and Codes, Government Regulations

04/2002 – 11/2004 Structural Engineer, Optima Engineers and Constructors, Calgary/Alberta
Projects: Anadarko, Exxon-Mobil, Shell Canada, Apache, EnCana, Trans Canada

Responsibilities:
* Structural analysis and engineering design for multi-level pipe-racks, single-frame pipe– supports and tee-posts, equipment platforms, cut-walks and equipment skids.
* AutoCAD 2D drafting for steel structures and concrete foundations including reinforcement.
* Site inspections with control measurements and sketches.

4/2001 - 3/2002 Structural Designer
Fitzgerald Architects & Engineers Ltd., Kells / Co. Meath, Ireland

* Performed conceptual (simplified) 3D modeling of existing and new buildings, large equipment, steel structures and foundations (AutoCAD solids).
* Coordinated the models with the piping, equipment, mechanical and electrical consultants.
* Converted to '3D Studio MAX', rendering and animations ('walk-through' and 'fly-by') for the client reviews.
* Realized engineering design and layout drafting for pile / spread-footing foundations, pre-cast utility buildings, u/g structures, standardized pre-cast bents and modularized steel tower-supports for piping, bridge-crossings and flares.

8/1996 - 3/2001 Design Engineer (Structural), Kremenchuk Engineering-Technology Bureau under the Ukraine Ministry of Oil and Gas.

* Performed conceptual (simplified) 3D modeling of existing and new buildings, large equipment, steel structures and foundations (AutoCAD solids).
* Coordinated the models with the piping, equipment, mechanical and electrical consultants.
* Realized engineering design and layout drafting for pile / spread-footing foundations, pre-cast utility buildings, u/g structures, standardized pre-cast bents and modularized steel tower-supports for piping, bridge-crossings and flares.
* Carried out detailed design/drafting for multi-level pipe-racks (modularized and stick built) with multi-story platforms, cut-walks, stair-wells and ladders.
* Implemented as-built measurements and 'built-in' design/drafting of mezzanine floor and replaced roof trusses, purling and bracing in the congested conditions of the operating plant.
* Responsible for site inspections and coordination of site-requested design changes and 'as built(s)'.

6/1993 – 8/1996 Construction Engineer – Capitan, Special Construction Regiment under the Ministry of Defense of Russia

* Carried out site survey and excavation and leveling works supervision.
* Performed concrete/rebar work inspections and equipment/piping supports survey inspections and installation.
* Had responsibility for the material and labor-force control and site supervision.
* Controlled the compliance of construction works with the designs.

REFERENCES Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 7040)

Go to Search Parameters...

Brief Description

Extensive hands-on international and United States oil and gas industry experience focused in the full spectrum of Exploitation geology (Development and Production), from mapping and geocellular modeling through prospect generation, operations and reserves reconciliation. TX Lic. #1455

Inspection/Welding Engineer

20+ Years in Drilling, Sr. Drilling Engineer. Land & Offshore

B.E with nearly 17 Years Experience as an Instrumentation Engineer in Construction, Commissioning and Start up, Maintenance support in Power and Oil/Gas plants (On Shore and Offshore) Projects.

21 years in oil and gas industry in field operations

Mechanical Q.C. Engineer and Safety Engineer in Construction, Consultancy.

Project Engineer

civil inspector, site manager, civil engineer

DCS engineering experience : HoneyWell DCS Experion C300 / C200 / TDC2000 / TDC3000 : over 8 year experience in Oil and Gas field in Canada: Revamping and Commissioning at site, and Testing: Another 10 years PLC experience.

Has 18 years + eexp in field of Automation and control and 7 years Middleast experience Previously employed with ABB and Invensys UAE .

Mechanical Engineer/Supervisor(rotating machinery)

Extensive experience of combined domestic and international on well logging industry

Results oriented Senior Piping Designer with experience in managing project scopes, costs, and schedules for numerous small to medium size projects.

Automation Engineer with a Instrument and controls background who has installed and commissioned various DCS Systems worldwide,currently working as a C&I Specialist in the middle east as a client rep. on site acceptance of Control,ESD and Fire & Gas systems.

Process Engineering Opportunity

Dynamic Positioning Control System Specialist

More than 15 years experience in instrumentation, process control, control system (PLC / DCS) and automation (SCADA) design, programming, commissioning and startup, and maintenance. Completed a large variety of the projects in energy, oil & gas, petrochemical process, and water treatment.

Sr Subsea Controls Consultant

A Post Graduate (M.Tech. – Electrical) after Engineering (B.E. – Electronics & Communications), supplemented with training on Project Management having total experience of over 28 years, including initial 20 years in Indian Navy and later 8 years in Project design for Utilities, Oil & Gas, Process

Petroleum Engineer, Safety Specialist.Managing, Administering, and Operating Safety and Environmental Health (HSE) programs. * Management/Budgeting. * Supervision. * Team Leadership. HSE/Strategic Planning and Program Development.

I have an extensive experience in detail design and stress analysis of piping and pipeline system for Oil and Gas Project for more than 18 years. I am familiar with International Code and Standards, EPC Company standard, and Major Oil Company Standard.

Pipe stress engineer

Currently a Senior Reservoir Engineer working with an Oil/Gas Major in Lagos Nigeria. I have had various trainings, both through formal courses and on the job. I worked in a studies team in Aberdeen, basically undertaking studies of hydrocarbon fields.

Over 46 years international experience in IT-Enabled EPC projects for onshore/offshore oil and gas, pipeline, petrochemical, chemical process and cryogenic plants, thermal power including cogeneration plants, refineries, iron and steel, pharmaceutical and other industrial plant construction.

Duties & Responsibilities in different Oil & Gas Operator Companies :

16 years of continuous experience in various field of construction in Oil & Gas, Petro Chemical Plants, Manufacturing Plants, Buildings and Infrastructure as a Lead Field Control Engineer, familiarized & having experience to different kind of works of a Planning Engineer, Schedule Engineer, Cost Con

Inspection in the field of Electrical & Instrumentation Works

Passed in diploma instrument & conrtol skills in dcs system and manage/conrol our staff

Automation, Control, Electrical, Instrument, SCADA Engineer - 30+ years experience

PDMS Piping/Mechanical Designer

20+ Years piping designer

Working for Petrofac International as Commissioning Engineer

Senior process engineer

Marine chief engineer and technical superintendent onshoreGood team player with excellent organization and motivation skills

I have 14 years experience in Piping Design and 5 years in PDMS piping design. I have been responsible for job packages start to finish, Isometric extraction, material extraction, survey & field investigation, P&ID changes, working with PDMS, all versions of Autocad, Microstation, and Cadworx

A Mechanical engineer with 17 years experience in marine,mechanical, hydraulics, pneumatics, electrical, elctronics engineer, Presently working as a hydraualic engineer in bosch rexroth, United Arab Emirates.

Materials Science and Mechanical Engineering, Solid lab skills in materials testing and examination, Failure analysis to determine the root cause. +10 years manufacturing & energy industry experience. Strong Computer skills-Stress analysis, Numerical simulation. Multi-languages

Eighteen years of combined experience in the petrochemical/petroleum and aerospace industries working for engineering contractors and operating companies. Experience with project management, project development, construction engineering, equipment maintenance/reliability, design, cost estimating.

15+ years of experience

Register Mechanical Engineer & certified 3.1 Welding Inspector.Speak , write, read english fluently.Well-versed in computer & different codes & standard like ASW,ASME,API & BS.Good knowledge of AUTO CAD & engineering drawings.

ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING, FIELD SERVICE, SUPERVISION

Petroleum engineering professional with diversified domestic USA and international experience in E&P

Senior Instrument , Electrical, Rotation, Engineer, Project Management

Highly experienced in dealing with Engineering, Project and Procurement coordination for Static equipments and Packages. Experienced in EPC,PMC,FEED and Study type of jobs and well versed with renowned Codes and Owner Company Standards. For further details, please refer my CV attached.

An experienced Manager with muti-skill in Quality Assurance, Quality Control, NDT, Offshore experience, Oil and Gas sector, Rig building projects, internal/external/regulatory audits, Interpretation of International codes and standards .

Experince at:: small and mid-sized projects involving integrity/rehabilitation/repair/construction of pipelines and piping systems – Oil & gas, Pigging operations, Pipeline design

Having more than 15 years of experience in the field of Installation,alignment and inspection of Rotating and static equipments in the field of Oil and Gas,Power ,Petrochemical projects.Can lead a team of engineers,foremans and work force involved in Installation,alignment and inspection of equipmen

19+ years of experience in Electrical Designer Field. Experience in Oil & Gas 3 Years and Power Plant Field More than 16 Years

PROFESSIONAL SKILLS : Sales Management; Sales Force Automation; Team Player and Leader; Project Management; Schedule Maintenance; Auto Cad; Caesar II ; Technical Writing; B31.3; Process Improvement; Strategic Planning; Microsoft Office

I am a petro;eum engineer, holding BsC in petroleum engineering in 1990 worked in drilling as drilling and workover company man and coordinator with Waha Oil Co. for more than 16 years., My experience in vertical and horizontal drilling, UBD, exploration and development , well completion,

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out