Resume - 35 years of experience in the process industry working for engineering firms, eq...

Misco Jobs

Resume #78454

CONTACT INFORMATION:
View contact information...

SUMMARY OF EXPERIENCE

* 35 years of experience as a Professional Mechanical Engineer in the process industry to include project and design engineering responsibilities with compressor manufacturers, engineering design companies, natural gas utility, and basic chemical company.
* Lead project mechanical engineer for plant expansions and debottlenecking projects.
* Developed inspection criteria, and performed inspections for major process equipment to include compressors, turbines, large motors, and vessels being built or repaired.
* Performed equipment calculations for feasibility studies and troubleshooting.
* Developed corporate procurement specifications for centrifugal compressor, pumps, gears, cooling towers and other process equipment associated with the chemical, refinery, and gas transmission industries for companies listed below.
* Senior engineer mechanical engineer responsible for the selection and application of a power generation/heat recovery system, and gas compression for an offshore platform.
* Responsible for equipment modifications, replacement, and repair.
* Reviewed pipe stress analysis and pipe designs for compliance to specifications.
* Developed nuclear radiation monitoring systems for a new nuclear process plant
* Provided engineering assistance during plant start-ups.
* Knowledgeable of codes and standards to include: API, ASME, ANSI, TEMA, and NEMA.

WHERE I HAVE WORKED

* Wink Companies, LLC
* Occidental Chemical
* Fluor/Daniel
* M.W. Kellogg
* Southern California Gas Company
* Dresser-Rand
* Delaval
* Bechtel Corporation for the Department of Energy
* Wellman Chemical, Inc.

EDUCATION, SOCIETIES, AND LICENSES

* Graduate of Milwaukee School of Engineering (BSME), 1973; additional engineering studies at California State Universities of Hayward and Long Beach; Former ASME Section Chairman with the New York Southern Tier Section; Registered Professional Mechanical Engineer in Wisconsin.

CAREER EXPERIENCE

WINK COMPANIES, LLC (3/2006 to 1/2009)
8641 UNITED PLAZA BLVD.
BATON ROUGE, LA

Senior Staff Mechanical Engineer

* Lead mechanical engineer for the following projects o Boiler expansion project for Valero, St. Charles Refinery o Wet gas compressor system for Sunoco, Eagle Point, NJ
o Off sites project for Sunoco, Tulsa, OK
o Small projects for Valero, Krotz Springs, LA, and Alon, Krotz Springs, LA

ENGINEERING TECHNICAL GROUP (ETG) (11/2005 to 12/2005)
NORWOOD, MASSACHUSETTS (contract engineering
Company)

Contract Project Mechanical Engineer

* Resolved maintenance and logistical problems at Wellman, Inc. a manufacturer of polyester. Wellman's plant is located in Bay St. Louis, Mississippi, and was damaged by hurricane Katrina. This was a short-term engineering contract.

SELF-EMPLOYED (2001 to 11/2005)

DEPARTMENT OF ENERGY (1999 to 2001)
Savannah River Site, (SRS)
Aiken, South Carolina

Contract Design & Development Mechanical Engineer

* Developed P&ID's, and system designs for personnel protection systems at a nuclear processing facility. Systems detected the presence of tritium, beta, and gamma radiation. Developed cost estimates and coordinated the design engineering.

OCCIDENTAL CHEMICAL CORPORATION (OXYCEM) (1989 to 1999)
Corporate Engineering
Houston, Texas

Principal Mechanical Engineer

* Project engineering:
o Supervised engineering performed within Corporate Engineering, and by engineering companies.
o Managed project costs and schedules.
o Wrote specifications and scope of work for plant construction.
o Evaluated equipment and construction bids, wrote requisitions, and coordinated the application engineering.
o Responsible for project and design engineering, plant engineering support, and start-up assistance.
o Participated in project design reviews.

* Developed Corporate equipment specifications and in-house technical assistance for the following:
o Centrifugal, rotary, and reciprocating type compressors o Industrial engines and emergency electrical power systems.
o Steam turbines, gears, and lubrication systems.
o Pumps, process water-cooling, and industrial refrigeration systems.
o Induced and forced draft fan systems for steam boilers.
o Forced draft evaporative cooling towers and air-to-air heat exchangers.
o API-541 induction motors.
o Field erected API tanks, and ASME code vessels.
o Industrial ventilation, control rooms HVAC, and liquefaction refrigeration systems.
* Performed pipe stress analysis to resolve equipment failures, and reviewed piping plans.
* Developed inspection criteria and performed inspections at equipment manufacturers.
* Technical consultant responsible for assisting plant operations, and project management with issues concerning rotating equipment selection, equipment troubleshooting, risk assessment, and repair

M.W. KELLOGG CORPORATION (1988 to 1989)
Houston Texas

Senior Mechanical Engineer

* Developed equipment specifications, and performed application engineering for the design of a coal slurry transport system used in the power industry.

SELF-EMPLOYED (1986 to 1988)

FLUOR ENGINEERING AND CONSTRUCTION (1984 to 1986)
Advanced Technology Division
Irvine, California

Principal Mechanical Engineer and Team Leader

* Evaluated designs for nuclear waste disposal, and storage.
* Assisted in the development of a computer program to model the performance of various types of power generation steam turbines.
* Evaluated the application of large adjustable frequency motors for process equipment installed in chemical plants.

SOUTHERN CALIFORNIA GAS COMPANY (1983 to 1984)
El Monte, California
(Central Engineering Center)

Principal Mechanical Engineer

* Responsible for the application and project engineering necessary to support "operations" for gas engine driven compressors installed in booster stations, and for underground storage sites for a natural gas utility company in Los Angeles, California.
* Reviewed technical proposals for a replacement gas turbine recuperator.

FLUOR ENGINEERING AND CONSTRUCTION COMPANY (1981 to 1984)
Irvine, California

Senior (lead) Mechanical Engineer

* Developed the specifications and performed the application engineering for a gas turbine power generation and heat recovery system, gas gathering compressors, and pumps installed on an offshore drilling and gas gathering platform.
* Lead mechanical engineer for the reconstruction of a fire damaged petrochemical plant. Developed the repair and replacement specifications, for compressors, pumps, and heat exchanger equipment.

TRANSAMERICA DELAVAL COMPANY (1979 to 1981)
Gas & Diesel Engine and Reciprocating
Compressor Division
Oakland, California

Manager of Compressor Engineering

* Responsible for the selection, design, and application engineering of process reciprocating compressors.
* Provided sales, field service, and manufacturing support for new and installed compressor applications.

INGERSOLL-RAND COMPANY (1973 to 1979)
Painter Post, New York

Project and Design / Development Engineer

* Project engineer responsible for equipment selection, application engineering, marketing support, and troubleshooting of process reciprocating type compressors.
* Design and development engineer involved in design of a new high-pressure compressors used in the production of low-density polyethylene.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 7054)

Go to Search Parameters...

Brief Description

Industrial Eng. with master degree in HSE. Title obtained: HSE eng. Specialist

A production/well completion engineer with over 20 years experience in Canada and overseas

I have Very good Experience in the Petrophysical Operation, Studies and Well reservoir Survillance. Have experience in QC/QA of integrated studies. Have leadership experience

Geoscientist

Honor degree in Mechanical Engineering form UK and have gained more than twenty five years experience in the fields of major sub-sea assets management, assets integrity, offshore operations, projects and contracts management, inspection, maintenance and marine related projects.

Multi skilled engineer, Technical Advisor, Mud Engineer

15 years Mechanical Engineer within Oil / Gas & refinery industry, inclusive 5 years maintenance experience; 5 years for nuclear power project; P.Eng of APEGGA, Canada

Can perform both technical work and sales work involving oil/gas industry more specifically as an advisor, planner, support or salesperson.

Drilling Engineer – DCWO planning, programming, engineering, operations evaluation, performance analysis; deep HPHT gas wells, high deviated, ERD and horizontal oil wells, sidetrack wells; land operations; harsh desert (Middle Asia) and arctic (Siberia) environment; English-Russian-Slovak

Senior Mechanical Engineer experienced in detailed mechanical / thermal / process and E&I design of Fired Heaters, Reaction Furnaces, Reformers, SCR’s WHRU’s, Boilers, Incinerators, Flares and associated ancillary equipment. Very strong E&I, DCS / PLC & BMS skills.

By working 17 years in the field of petrochemical field, I experienced all kinds of key projects like FCCU, Hydro-cracking unit, Hydro-treating unit and have expert ability to do piping static and dynamic stress analysis. Also I have five years working experience as a mechanical engineer in refinery

35 years of experience in the process industry working for engineering firms, equipment manufacturers, chemical company

Conducting a piping training program from zero skill up to a skill trainees supervising the assigned work from planning, organizing, leading and controlling. Performed piping work activities from designing and drawing the piping tie-in to existing pipelines, drawing various structural platform

Twenty years of professional experience in, design, consultancy, construction and maintenance, covering a broad range.

25 years of experience in construction, installation, commissioning, testing and maintenance of Electrical, Electronics and Instrumentation equipments and controls in Petrochemical Industry

Have more than 20 years experience in Piping Design and Engineering including Stress Analysis and Piping Materials Control for various projects in petrochemical plants, refineries and commercial chemical plants. Presently working in Worley Parsons (Colt Engineering Corporation), Calgary, Canada

Overview: Thirty (30) years of engineering management experience, 25 years of which were in the oil, gas and shipping industry and EPC projects that include the following: Project management, conceptual, feasibility studies, detailed design engineering, procurement, constr. and commissioning

Over 18 years experience in 2D and 3D seismic data processing. Processing land desert and mountain data. Processing experience gained in Geofizyka Krakow Ltd, WesternGeco and CGGVeritas. User knowledge of Unix, Linux , excellent Omega SPS and Tango, basic ProMAX. Good MS Office skills.

Advanced Process Controls, RealTime Process Information Systems, LIMS

PROJECT MANAGEMENT, CORROSION & MATERIALS,INSPECTION & INTEGRITY ENGINEER/MANAGER

More than eighteen years of experience in premium International Oil and Gas Engineering Consultancy Companies within the field of Process Safety, Technical Safety and Loss Prevention.

well services, production technology, safety, beam pump

Licensed Professional Engineer, performance oriented, with extensive broad-based experience in multidisciplinary projects. Particular expertise in Instrumentation and Control Systems Engineering for Chemical and Oil & Gas Industries. Supervision of complex detailed Engineering and Procurement.

Reservoir Geologist  To perform characterization Reservoir integrated Studies and reservoir Modeling. Generation and evaluation Geological Prospects and development opportunities. Elaborate Exploitation Plans. Planning (targets) and monitor of Special Wells. Volumetric reserve estimations.

Primavera, MS Project, MS Office, EVMS, Planning

Versatile technology professional with expertise as a Senior Reservoir Engineer and Operations Business Manager. Resourceful problem solver who performs well under pressure. Outstanding leadership, organizational, and communication skills. Granted Top Secret Security Clearance. Analytical.

More than 13 years of multi-international reservoir engineering experiences in gas and oil developments from sandstone and carbonate in land fields and offshore,including different stages of appraisal and development planning & management, well test, reservoir characterization & simulation, economic

SmartPlant 3D/P&ID Application support

I wish to apply for suitable position in the highly motivated & challenging environment. I am having 21 year of experience in different fields of Gas, Petroleum and Chemical industries. Also involved actively involved as an engineering material coordinator. I am having experience in identifying

More than 20 years experienced in project design services which involved mechanical and piping design preparation of conceptual design packages and detailed design packages, specification of pipes, fittings, valves and other specialties. Developed specifications for pumps, steam turbines, tanks, pre

A total of 15 years of professional work experience, (9) years in the Gulf region, of which seven years Were in the oil/gas, petrochemical, power/desalination plant and building construction projects. A Computer literate and proficient in oral and writing English communication skills.

Geophysicist position in a oil-field services company. I have more than 18 years of seismic data processing and data management experiences.

Welding Inspector, CSWIP 3.2, ASNT-II Certified, 18 Years working experience in Oil and Gas Industries in various countries.

Has 20 Years Expeierence in various aspect of Control and Automation and last 7 years in Middle East with ABB /Invensys. Has done large projects and several latest DCS/ESD systems such as Triconex,ABB infi90 , Foxboro I/A , Honeywell TDC3000 etc

I am qualified Degree chemical Engineer from the reputed Maharaja Sayaji Rao Uni, Vadodara

I’ve total of Eighteen (18) years experience in the area of Pipeline design and Piping design for oil & gas and petrochemical projects.

Over 30 years and broad range of experience in oil and gas exploration. Bachelor degree Geophysics/ Geology and MSc degree in Geophysics. Worked in most aspects of exploration, such as seismic survey planning, acquisition, data processing, interpretation, AVO, seismic attributesand seismic inversion

Expertise in gas sweetening, gas compression, gasification process, and U&O facilities.

Over 16 years experience as Electrical Engineer

I have been a Process Engineer for 16 years. My experience includes process design of oil, gas and petrochemical plants and steam and power generation units, expertise in conceptual design, basic design, FEED and detailed engineering, experienced also in optimization and troubleshooting projects.

Over 20 years experience in chemical, petrochemical and oil&gas industry.

Presently working as Sr APC & Opt Engineer in Qatar Petroleum Refinery. A total of 20 years experience in Petroleum Refinery industry (8 years in APC & Opt, 5 years in Technical Services and 7 years in Operations).

I have extensive experience in Oil&Gas industry and EPC, I have extensive experiencey in Rotating Equipments Design and I worked in a refinery in Egypt as the Head of the Rotating equipments for 14 years.

Having achieved many goals in my long career how MECHANICAL ENGINEER, I am interested in continuing my professional horizons by working as a FLEXURAL STRESS AND MECHANICAL PIPING DESIGN AND LEADING MECHANICAL ENGINEERING PROJECT for your respectable company.

Have about 25 years of experience in logging operations (Open hole, Cased hole and Production Logging Services) and interpretation of well logs (Open hole, cased hole and Production Logging)

To provide technical expertise of piping, mechanical engineering for Oil & Gas, Petrochemical, Power plant. Support to projects management, Supply division and projects controls through all phases of major and minor projects

Process Design Engineer with experience o fEPC contracts in Saudi Arabia. I also have expereince in operating plants, providing plant support. I am currently working as Technical Manager of 20 process engineers, doing small projects execution for Sasol Infrachem Utilities.

Seismic interpreter and reservoir geophyscist with experience in reservoir modeling, geostatistics and rock physics

An experienced Control & Instrumentation Engineer with extensive achievements in leading, designing, executing, and organizing project activities for process industries, e.g. oil/gas refineries, chemical/petrochemical complexes, Power plants, steel and copper industries.

Accomplished PLC, HMI, automation, programmable controls specialist

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out