Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #78544 next resume »»
CONTACT INFORMATION:
View contact information...

Talented and accomplished Information Technology professional with extensive background in front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic communication infrastructures at the national and global levels. International project management experience. Able to liaison between technical and non-technical persons. Adept at determining requirements, project scheduling, and technology planning.

AREAS OF EXPERTIS

* Wireless network planning & design (LMP, PMR, TETRA GSM/GPRS, WiMax).
* Backhaul microwave link design (mesh/ring, PTP & PTMP links).
* Satellite VSAT network planning & design (DVB-RCS,DAMA/TDMA/SCPC)
* Infrastructure fiber optic network design (STM/DACS/MUX/T1/E1)
* Wireless/fiber data network design for SCADA and DAMS applications.
* Technical specification development
* RFI/RFP preparation/response & assessment
* System installation, test & commissioning.
* Resource planning/allocation
* Project risk management
* Government regulatory compliance
* Standards and best practices.
* Customer Solutions.
* Complete project lifecycle expertise.

TECNICAL Skills

Application/Tools: Proficiency in SignalPro, ATDI Planning Tools, Pathloss, StarLink, for radio coverage analysis/propagation modeling, frequency planning, RFI analysis and backhaul microwave link design. STI-9400 for coverage verification/validation test. Intelsat LST5 for satellite link design.
Networking: Wireless network dimensioning, backbone requirement and fiber optic transports/routing.
Hardware: Nokia TETRA/TDAM system (DXTip NMS, TTRX (TB3) and dispatch console). - Motorola SmartZone, ASTRO (FDMA) trunked radio (SZ, Omni switch, AMB, Quantar BS, MS-3000, CEB). MDS & TRIO data radio. Park Air PAE-T6 aviation radio system.
Advantech DVB/S2-RCS system, NEC, STD "Z" earth satellite station.
Backhauling microwave systems. Harris, TRurepoint 5000, NEC, PASOLNK series and Redline, 50i & 80i UWB MW systems
Alcatel STM-1, 4 & 16 transport. DACS, Siemens OTN/STM-1/E1 add/drop multiplexer.
Instrument Control: RTU/PLC (Siemens, FF-Automation and Yokogawa). VXI/PXI peripheral interface equipment. Familiarity with ModBus, CAN, HART and FieldBus protocols. IS-95 & 100 for plant automation system (PAS).
Agilent VEE, NI LabView and Web Studio (SCDA and data acquisition & monitoring application).
Test Equipment: Proficiency in Agilent test & measurement/programming, ESA Series, HP8561, 70001A,spectrum analyzer, HP 8573D Network Analyzer and 4287A RF LCR meter. Test Equipment programming/control: VISA, GPIB, RS232, USB and, SCPI.
Regulatory Procedure: FCC, ITU, INTELSAT Pan AmSAT, EUTELSAT
Standard: APCO-16 & 25, TETRA-EN 300-390 standards for the Public safety radio MOU, radio interoperability (IOP), test & requirements, Satellite DVB/S-RCS (ETIS, EN-302-307 & EN-301 790).

EXPERIENCE

Lead Project Engineer, Aramco/ASC Company, 2008 to present. Information Technology (IT), Responsible for the engineering and technical accuracy of the work performed by Contractor (KBR) for IT Program front-end-engineering-design (FEED) of a Petrochemical Plant, including:
* Data network architecture to support plant business and plant process automation system (PAS, IS-95) requirements.
* VoIP Telephone and Hotline/Direct Outside Line Telephone systems
* Satellite Backup Communications Systems
* Mobile Radio Systems (TETRA trunk radio, aviation and maritime radio systems, WiMax).
* Plant Emergency- Security & Safety (ES&S)
* Marine Vessel Management Tracking System (VTMS) and AIS,
* Fiber Optic Transmission Systems (STM/DACS/T1/E1)
* Disaster Recovery Center.
* SCADA Network

Sr. Project Engineer Aramco Company, 2003 to 2007. Information Technology (IT) Dept. CE&TSD Wireless & Satellite Group (WEG/SEG).

* Designed, implemented, installed, tested & commissioned of a DVB/S2-RCS satellite VSAT network, for voice, data & internet services. The network comprising of 2x5.6m Gateways (GW) and 350 VSAT remote terminals, provided each up to 45 mbps in forward link and up to 16x2.048 mbps in the return link utilizing 72 MHz Ku-band (14/11 GHz) satellite transponders of INTELSAT 10-02 at 1oW.
* Designed, implemented, tested & commissioned Nokia TETRA/TDMA mobile radio network. The network consisted of 2-DXTip, Nokia TETRA switches, 61 cell sites, 20 mesh backhaul microwave links, 37 dispatch consoles and approximately 3000 mobile radio users. Provided system, fleet management and user talk-group structures.
„X Designed, implemented and tested & commissioned Motorola SmartZone trunked radio network for public safety services. The network consisted of 52 radio stations, 2-omni switches/controllers, 25 microwave backhaul links, 80 dispatch consoles and approximately 4,000 mobile radio users.
„X Designed, Implemented, installed, tested & commissioned fiber optic transmission system to 218 gas wellheads/RTU for data acquisition & monitoring system (DA&MS).
„X Designed, Implemented, installed and commissioned wireless LAN/fiber optic for Plant, oil wellheads and pipeline valve/RTU, SCADA system.

Supervising Engineer, Parsons Infrastructure & Technology, Pasadena CA, 1998 to 2002. Responsible for engineering and technical accuracy of the work performed by the lump sum turnkey contractors (GD, Government System,) involved in the system design and implementation of $100M telecommunication project. The project included trunked mobile radio system, private automatic branch exchange (PABX) telephone system, digital multiplexer, asynchronous transfer mode (ATM) LAN based network and 2.5 Gbps add/drop synchronous digital hierarchy (SDH) fiber optic backbone system to provide voice and data communication for Hawiyah and Haradh Gas Plants.
Responsible for design validation of the fiber optic transmission and radio networks, project execution plan, network performance evaluation & reporting, radio coverage, RFI analysis, traffic loading, network throughput, IFI/IFP preparation and Vendor technical proposal evaluations.

Supervising Engineer, Parsons Infrastructure & Technology, Pasadena CA, 1995 to 1997.
Project Management Consulting, responsible for the engineering and technical accuracy of the work performed by the lump sum turnkey contractor (GTE, Government System) involved in the system design and implementation of $72 MM communication for Shaybah Oilfield.

The project included, multisite 800 MHz Motorola trunked mobile radio system, radio aviation system, UHF paging radio, VHF radio pipeline radio, digital access connect system (DACS), DAMA/SCPC satellite gateway and very small aperture terminal (VSAT), 2.5 Gbps synchronous digital hierarchy (SDH) backbone system to provide voice and data communication in a remote area. Duties included developing of the project proposal, system specifications, detail design, system optimization, networking & traffic sizing and frequency planning.

Senior Project Engineer, Mobile Base Inc. (MBI), Planning and Expansion Department, San Jose, California, 1993 to 1994. Responsible for backhaul microwave link design between cell sites (CS) and mobile telephone switch office (MTSO). Duties included system engineering, radio links design & analysis, link performance calculation and measurement. Developed written specifications and system design criteria for digital microwave and fiber optic multiplexer systems. Preformed system performance test & measurement. Developed IFI/RFP for the system and sub-system requirements.

Project System Engineer, Matrix Corporation, Torrance, California, 1990 to 1992. Responsible for design, debugging and testing of automatic test equipment (ATE) for high frequency transmission measurement using PC based computer and HP70000 modular spectrum analyzer. Duties included design, prototype and test of various microwave devices, such as L-band low-noise amplifier, 1 GHz frequency synthesizer, QPSK Modulator/Demodulator.

Sr. System Design Engineer, IRIB, Satellite Department, 1980 to 1989. Design, implement, procurement, test & commissioning of a satellite communication system for the voice & data services to the remote area. Duties have included system architecture/system design, space segment and earth station characteristics, developed system performance requirements, satellite RF link design, link analysis and system performance calculation. Drawing up the transmission plan and establishing and putting into the operation a standard "C" earth station and performed verification test with INTELSAT. Performed in-orbit testing of satellite transponder at INTELSAT facilities and measured satellite antenna performance, transponder gain transfer characteristics &, EIRP.

EDUCATION
Ph.D. University of Dijon, Dijon France 1980
MSE. University of Dijon, Dijon France 1977
BSC. University of Tehran Iran 1974

PROFESSIONAL LICENSES AND SOCIETIES
Institute of Electrical and Electronics, Engineering
Former member of CCIR Study Group 7, mobile services and Study Group 4, fix satellite services in the Radio Communication Bureau of the International Telecommunication Union (ITU).
Familiarity with IS-136, UMTS, GMS/GPRS/EDGE & HSPA and IEEE Standards for wireless network (802.11 Wi-Fi,, 802.16 WiMax, 802.15 Zigbee)

PROFESSIONAL TRAINING
Trunked Radio System, Motorola, Schumburge IL 1999
UHF Paging System, Motorola, Schumburge IL 1999
ISO-9000, GET, GSC, Fairfax VA 1999
Satellite Communication System, NEC, Tokyo Japan, 1985
Microwave System Engineering, GET, Milano, 1984

Citizenship: US Citizen

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1 to 50 of 7011)Go to Search Parameters...
Brief Description
Free! Completion Supervisor for vertical and horizontal wells with 14 years experience
Free! Experienced Geologist with all types of Petroleum Geology experience including conventional, tight sand, shale & CBM.
Free! Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.
Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.
Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification
Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.
Experienced Ph.D Reservoir Compositional Simulation Engineer
Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC
I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.
30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.
cfd, thermal, aircraft, turbomachinery
I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .
A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for
A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi
I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc
23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses
As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.
front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic
Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.
Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.
I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.
20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms
Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller
I had a master degree in structural engineering from the University of Southern California.
30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.
Free! A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.
Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer
Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.
Chief structural
Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing
As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.
I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.
Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.
More than 25 years in OIL & GAS Offshore and Onshore Industry.
Senior Geologist - Develoment Geologist - Advisor
Qualified, experienced both in Onshore/ Offshore and Deepwater, conversant with evaluation and testing of drilling mud. Expertiseproblem solving and report generation
Free! BSc/MSc. 27yrs experience. Expertise: petroleum geology, sedimentology, stratigraphy, depositional modeling, 3-D reservoir architecture (RMS software). Experience: new ventures, exploration, production, acquisitions, and disposals. International exposure: 40+ geological basins in 25+ countries.
MBA and graduate Electrical Engineer with 21 years experience in Oil & Gas, Power & Plant Utilities
Seeking a challenging position to expand my capabilities and provide opportunities to grow in QA/QC and inspection fields in oil industries.
Control System Engineer
Ability for Project Managements and proactive coordination of the design, fabrication and equipment purchasing for the large offshore drilling projects
Experienced E&P reservoir engineer, results oriented performer, leading team of engineers and geologist to optimize field development and maximize asset return.
Mechanical maintenance trainer
I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems
Chemical Engineer with over 25 years of diversified experience in downstream, mid and upstream facets of petroleum industry. Adept at identifying process enhancements that have resulted in savings of millions of dollars. Industry experience spans conceptual, front end and detailed engineering design
27 years experience in reservoir engineering, from field operations to pressure testing and simulation.
A proven creative and successful oil and gas professional with many yeas of excellent experience in all aspects of oil and gas exploration and production. My experience include prospect generation , modern seismic, attribute analysis, 3-D interactive work-stations ( SMT, Land Mark etc), reservoir c
SUMMARY OF QUALIFICATIONS Acidizing and brine additives, corrosion inhibition, metallurgy, demulsification, scale inhibition, formation mineralogy, formation damage prevention, friction reduction, lubrication, excellent lab testing and engineering design skills
Degreed electrical engineer with many years of experience in instrument engineering for oil production and refining, government facilities, water and wastewater facilities and nuclear sites.
CORROSION SPECIALIST & CHEMISTRY LECTURER
First   [ 1 ]   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com