Resume - i worked in a mudlogging unit for 13 years; i'm a unit manager , i'm IWCF Certif...

Misco Jobs

Resume #78552

CONTACT INFORMATION:
View contact information...

Nationality: Algerian
Date of birth: 28th December, 1971
Place of birth: Barika (W) Batna
Domestic Situation: Married (04 Children)

By the current form I'm looking for a job, you deem I am ideally suited regarding to the abilities I experienced, being detailed hereby.
For me, the chance to work within your company would be an exciting step, where I feel ready to take on larger challenges, and be sure I can reach and even exceed your hopes where I can guarantee attitudes as well as a serious behaviour and I'll do my best to get your goals fulfilled, because simply I believe that a company like yours which finds itself in the midst of rapid expansion, requires energy, commitment, and drive to move up to next level.
Finally I trust you to answer me back whenever you find it worthy.
Please let me know if I can provide you with further information. I look forward to hearing from you.

Period Obtained Diplomat Established by Location
1984-1987: Baccalourèats in Mathematics Secondary School (Lycée Mixte de Barika) BARIKA, ALGERIA
1987- 1992: Computer Engineer ( A degree of Ingenieur d'etat (1)), "English based Graduation" National Institute of Electricity and Electronics ( I.N.E.L.E.C) Boumerdes, ALGERIA
1987-1992 English certificate "To whom it may concern" (2) National Institute of Electricity and Electronics ( I.N.E.L.E.C) Boumerdes, ALGERIA

Period Occupied Job Company/Establishment Location
1993-1994: Mathematics Then English Teacher Sec. School Med Salah Belabbes BARIKA, ALGERIA
1994- July 1995: Software Design Engineer for Workfolk & Trading management. C.A.A.S.A.P Barika, ALGERIA
1996-July 1996: Computer based system research engineer Nuclear Reactor (C.D.S.E) Ain Oussara, ALGERIA
1st July 96-To Date Unit Manager Level 3 + Data engineer Sonatrach –Dir. Mudlogging and laboratory Hassi Messaoud, ALGERIA

I assisted in a near practical way, then I acquired a lot of the followings:
Drilling Technology:
 Bottom Hole Assembly (BHA) selection criteria for both vertical and horizontal wells.
 Gas Detection methodology, and reservoir estimation.
 Well Control Calculations and procedures (both in theory and practice), I'm IWCF Certified.
 MWD (measurements while drilling) and LWD (logging while drilling) techniques (Sensors, acquisition, and signal recovery)
 Directional drilling tools.
 Under balance drilling tools ( Weatherford equipments) and techniques
 Running procedures of DST (Drill Stem Test) tools (reservoir test).
 Turbo drilling (with a smith turbine up to 2800RPM).
 Bit selection and grading
 Bit hydraulic Optimisation.
 Hole problem prediction (using mud logging or electrical logging).
 Very familiar with the most used Logging tools (how do they function, when and where they can be ran?).
 Diagraphy and log interpretation (Gamma ray, Sonic, MDT, CBL, Caliper, Free Point Detector, etc.. )
 Formation pressure tests (LOT, FIT)
 Mud engineering: Mud types, selection, and characteristics, mud reology, Hydraulic calculation and law types ( Binghamian, Newtonian, Standard and modified power…)
 Solid removal systems.
 Well hydraulics.
 Kick and blow-out control equipments, kick types (while drilling or tripping).
 BOP (Blow Out Preventer) test.
 Cementing job.
 Under balance Drilling Technology.
 Coiled Tubing Technology.
 Oil fishing tools and techniques.

Geology:
 Rocks classification, reservoir types.
 Formation tops on ROP basis (Rate of Penetration) or D exponent basis (Drilliability Compaction Trend).
 Rock tests and measurements (porosity, permeability, shale density, Calcimetry, chemical tests)
 Casing and coring points selection.
 Normal and abnormal pressured zones determination.
 Geothermal gradient (temperature analysis)
 Overburden gradient ( pore pressure deduction)
 End of well Logs and log interpretation.
 Well to well correlation.
Electronics:
 Digital and Analogue, and power electronics.
 Signal processing theory and implementation.
 Micro-controllers, and Microprocessors.
 Digital and Analogue Sensors, and acquisition cards.
 Communication media: Serial, parallel, USB, Infrared, and Blue-tooth, technologies.
 Computer hardware systems, Motherboards, I/O cards, Buses, Mass Storage media, with a very good level in hardware maintenance.
Computers: very familiar with:
 Computer Network design, configuration, protocols, and security.
 Wireless LANS
 Operating systems: UNIX, Linux, and all Microsoft Windows since 95 up to Vista
 Programming Languages: Assembly, Fortran, Visual basic, Pascal, C++, Delphi, XML, Java, Clipper, Dbase, and some others
 Word Processors: Excel, Word, PowerPoint, And Access.
 Web Designer: FrontPage, Dream-weaver
 Hacking and remote PC Control Technology.
 Flash makers.

Period Training Topic Company/Establishment Location
Feb-Marsh,1991 Radio & TV Receivers and broadcasting " Student Trainee" Radio/TV Broadcasting Station Metlili Ain Touta, ALGERIA
10th-31st july 1996 Well Rigs, Drilling Technology Naftogaz, Iap Institute Hassi Messaoud, ALGERIA
13th-28th August 96 Network Architecture, hard and software design technology
Based on several Operating systems Research and Development Centre - Sonatrach Hassi Messaoud, ALGERIA
Sept -October 1996 Halliburton SDL9000 Mud-logging system
Awarded as " Data Engineer " Mr: PAUL BROWN, Halliburton Enegy services Ltd –Aberdeen United Kingdom Hassi Messaoud, ALGERIA
26thJuly-25th Aug 97 Health Safety and Environment(HSE) concepts and procedures in the Oil and Gas Industry. Dr. Adel Ibrahim –Schlumberger
Mr. Mahmud Emad IHRDC Member - Egypt Hassi Messaoud, ALGERIA
June 1998 Formation Pressure Evaluation Techniques
Awarded " Pressure Engineer" Mr. Bill Rankin, Halliburton Enegy services Ltd –Aberdeen United Kingdom Hassi Messaoud, ALGERIA
Nov - Dec 1998 Sonatrach Leaders Of The Future
Algeria Session: 02 Months
Instructed by Several Specialists Mr. Martin THOMSON + David CAMBELL British Petroleum Co.–Aberdeen United Kingdom Irara base, Hassi Messaoud, ALGERIA
February, 1999 Sonatrach Leaders Of The Future
UK Session: 25 days
Instructed by Several Specialists Mr. Martin THOMSON + David CAMBELL British Petroleum Co.–Aberdeen United Kingdom Sprinfield hotel Denham, UK
April, 1999 Sonatrach Leaders Of The Future
UK Session: 17 days
Instructed by Several Specialists Mr. Martin THOMSON + David CAMBELL British Petroleum Co.–Aberdeen United Kingdom Sunburry LONDON, UK
June, August 2000 Datalog Mud-logging system
Awarded as " Data Engineer " Mr: Mahmud sayed, Datalog Ltd –Calgary CANADA Hassi Messaoud, ALGERIA
14th –27th June 2008 Abnormal Pressure Evaluation
And IWCF TEST preparing Mr: S. Bekiri, NAFTOGAZ (IAP Institute) Hassi Messaoud, ALGERIA
22thNov–04thDEC2008
27thDEC 08-01Jan 09 IWCF Certification
Certified on: 1st January 2009
Center: SH-AMT-FOR-DRMD, Algeria Sonatrach Drilling Division DOF Hassi Messaoud, ALGERIA

[I.N.E.L.E.C. Boumerdess, Algeria] Senior Project Thesis: to obtain a degree of Ingénieur d'état in Computer Engineering entitled " PC-based Data Acquisition for Spectrum Analysis" designing A hardware card and its Software using turbo C++ language.
[Nuclear Reactor, Ain Ouassara, Algeria] A Research project thesis: "A Computer based Rotary Shaft Machine vibrations and anomalies Detector.", Hardware and Software design.

Language Writing Reading Understanding Speaking
English Excellent Excellent Excellent Excellent
French Excellent Excellent Excellent Fair
Arabic Mother Language

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 7051)

Go to Search Parameters...

Brief Description

Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis.

Electrical Maintenance in Petrochemical Industry

Extensive and diversified experience in the field of Onshore & Offshore Oil &Gas, Petrochemical, Refinery, Chemical Plants for FEED, BASIC Design & Detail Engineering for various types of Static Equipments viz. Pressure Vessels, Columns (CS & CLAD), Towers, Reactors, Heat exchangers, steel structure

Telecom

Mechanical senior technician,• Carry out maintenance work independently in the repair, overhaul, troubleshooting, alignment of rotating equipment like (pumps, compressors, fans …), spares requirement…

I am a chemical engineer having 17 years of work experience in India and Bahrain at various management levels in process engineering and operations, troubleshooting of of Fluidized catalytic cracking, gas compression, concentration units, and hydro processing units, gas treatment & sulphur recovery

Managemen and Multidiscipline Engineerign Coordination of Oil & Gas Industry |FEED and Detail Engineering Projects.

Integrated Geoscientist & Reservoir Geophysicist-Geoscientist/3D Modeler

unigraphics designer drafter

I am a Senior DCS/Instrument engineer with 19 years of experience in Project engineering, Construction, Commissioning and Maintenance support of Oil/Gas & Petro chemical industries.

Safety/HSE Manager

Instrument, production,control room technician, shift supervisor on chemical plant. worked off shore on shell dunlin,cormarant and nelson, british gas morecambe bay,conoco sns, wellhead control,subsea. on shore i.c.i., dupont, ukaea, power stations. Tricon , modicon plclc

Technical Manager Maintenance Planner, Semisubmerisble engineer, hydraulic engineer, diesel engineer

I have worked in the oilfield for 39 yrs as seaman, bosun, crane op, and barge engineer/master.

P.ENG with 14 years experience in reservoir management,reservoir engineering analysis, economics evaluation,well testing

Offshore Crane Operator/Technician/ Lifting Specialist

Total 14 years of Post Qualification Experience out of which 4 years of Experience in Oil and Gas & Refinery Piping Design and 10 years in Power Plant Piping. Total Experience consists of Piping Detail Engineer-ing, Physical Design Deliverables and Stress Analysis

A self motivated and result oriented professional with 11 years experience in various Industries such as Oil & Gas drilling and Community Services using latest technologies. In recent past I am working in the areas of drilling, administration, customer relations and services and training/development

Sr. Piping Designer/Checker

20+ years RE experience in brownfields, greenfields, offshore, onshore, dry gas, gas condensate, light, medium and heavy oil, sand and carbonate. Expert in WT design and interpretation, Reservoir Simulation, Horizontal well, Tight Gas, Hydraulic Fracture,Fractured Carbonate, EOR (WAG, CO2, Thermal)

Total of 33 yrs exp with 15 yrs international exp in oil and gas as wellsite/geosteering geologist in Carbonate and Clastic reservoirs, gas detection/mud logging, description of cores and drill cuttings, interpretation and correlation of electrical logs

HSE Process Safety

Fourteen plus years of international experience in the wireline logging industry with one of the leading oilfield service providers. Worked my way up from Wireline Field Engineer through several roles to my latest job as a Field Service Manager

Over (15) fifteen years of working experience in Oil and Gas onshore and offshore facilities in the field of Electrical and Instrumentation, inspection in the constructions, testing and commissioning of power plants and Floating Production and Storage Offloading ( FPSO ).

25 years Drilling, Completion, Work-over Supervision. International experience Dominican Republic, Venezuela, Oman, Qatar, Ecuador and North Sea. Domestic experience Kansas, Oklahoma, Colorado, Texas, Louisiana and Alaska. Sub Sea experience Gulf of Mexico and North Sea.

22 years of aircraft maintenance related experiences with the United States Air Force

Refinery process engineer

i worked in a mudlogging unit for 13 years; i'm a unit manager , i'm IWCF Certified, i know deeply all the drilling operations

I have many years experience in design (Solidworks), documentation, and manufacturing of high resolution medical ultrasound imaging equipment, as well as extensive experience in industrial automation components and systems.

17 years experience covering all aspects of Structural, Design, Management, and Construction. Working through various positions from the shop floor as Superintendent Draughtsman, Designer, Lead Structure designer and Checker, Project Engineer, Site engineer, Quality control and Bidding. Working for

Offering Extensive Experience in Industrial Electrical/Instrument Equipment And Systems.

electrical engineer

Instrument technician I am the former employees of one of manure / fertilizer company biggest in Indonesia.experience my job 25 yeard ( start December 1982 up to April 2008 ) area of fild instrumentation proces work responsibility : technician of calibration, loop

Certtified hygienist with more than 30 years of experience. Presently working both onshore and offshore in the Middle East. Qualified OHSAS 18001 auditor. Masters degrees in both Occupational Health & Environmental Management. Excellent interpersonal skills. Looking for challenging position.

Key Competencies: over 20 years of experience in technical jobs: On shore, Oil, Gas and petrochemical and Power Plant Industries involved in Project Management, Commissioning Maintenance and repair, Lubeoil/seal oil flushing of compressors and pumps, QA/QC rotary and static equipments, etc.

Senior Mechanical Engineer (Projects/ Engineering / Design). I have diversified experience of about twenty-four (24) years in the field of Design & Projects Construction of Gas & Oil Production(onshore / offshore), Artificial Gas Lift, Water Flood and Oil Refining.

I provide professional pipeline engineering skills for the owner firms

Multifaceted, driven, and highly motivated professional seeks a Senior Level Drilling Engineering position in a dynamic and high-paced environment.

Worked in IMECO (International Mechanical & Electrical Company) UAE as a Asset Management Specialist to manage & controlled Electro-Mechanical Data using by Maximo. Provide data on-time as per the requirement of the Departments, users & Oil Companies.

Logging geologist / data engineer 12year experience offshore - interested in offshore Geologist or Night Drilling Supervisor positions.

Through my current work experience (+10 years) in the oil & gas, I have gained the necessary fields operations, production and troubleshooting skills and I feel confident in my ability to accurately assess technical problems and develop effective solutions.

10 years experience Piping Engineering including Stress Analysis of piping connected to vessels, pumps, compressors, exchangers, psv’s/ flare lines; prepared piping layouts and material specifications; carried out check/ analysis for flanges, trunnions, and nozzle allowable; prepared specifications

Strong background experience (19 years) in petroleum engineering, optimizing oil & gas fields, plants operations and gathering systems. Leading operation team in planning and monitoring production activities

Analyze requests for contracts initiation and develop contracts packages, set and recommend qualification / evaluation criteria and negotiation strategies and attend the same, coordinate and advise users Divisions on contractual and commercial matters.

I am currently working as Principle Process Specialist for Worley Parsons MEG, Calgary. I have more than twenty-four (24) years of experience in process design, conceptual studies and operations, for oil and gas projects (both onshore and offshore), petroleum refineries and petrochemical complexes.

CSWIP Senior Welding Inspector BG Grade 2 Painting Inspector NDT ASNT Level 2

Using Eclipse Simulator for history match and prediction of oil and gas reservoirs.

Reservoir Engineer,18 years of experience from Condensate to Heavy oil fields, over 4300 hours of intensive petroleum training. Extensive experience as Integrated Team Leader. Extensive experience with Single and Multilateral Horizontal wells in Heavy Oil field. Simulation, planning experience.

Having more than 14 years experience in Welding Inspections, , construction, fabrication, installation, commissioning in QA/QC Multidiscipline field as TPI or clients representative of Major Projects in the heavy construction industry including, onshore & offshore. Petrochemicals Facilities, Fertili

11 yrs Experience in Construction - Inspection Fields

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out