Resume - Highly skilled in Electrical and Instrumentation field engineering and technica...

Misco Jobs

Resume #78572

CONTACT INFORMATION:
View contact information...

OBJECTIVE
--------------------------------------------------------------------------------------------------------------------------------------------------
Position in Control Engineering, Instrumentation Engineering, Electrical Engineering, Field services and Management.

WORK AUTHORIZATION

I HAVE AUTHORIZATION TO WORK IN THE UNITED STATES OF AMERICA.
Professional training and certification:

¡ñ (General Electrics Company), GE Mkvi And MkVi_E Control system for Gas/Wind/Steam turbines and
Balance of Plant ( BOP).
GE Energy Learning Centre, SALEM VA United States Of America (USA). Dated 29th Sept to 12Dec 2008)

¡ñ Bently Nevada 3300/3500 series (Gap Analysis and Data Dynamic interface) Operation and Maintenance Course.
Bently Nevada Corporation ( A GE company) Belgrave Terrace Aberdeen United Kingdom (UK). Dated March 10 to Mar 18, 2008

¡ñ Maintenance, Operation and Control of DCS / PLC System via ABB INFI 90 system control.
Saipem Energy International & TTC Consulting Group Organized by Agip Energy & Natural Resources Ltd Nigeria (AENR). Dated July 02 to July 12 2006.

EXPERIENCE
Granite International (GE)

Instrument and Control Field Engineer / Technical Advisor
Mar 2007 to Present.

PROJECTS:
JULY 2008 ¨C 28 SEPTEMBER 2008 OB OB GAS PLANT AGIP NIGERIA.
¡ñ Major Inspection On MS5001 GE Frame Five, 11KV, 25MW Power Generation Gas Turbine.
¡¤ Disconnection and disassembly of instrument loops
¡¤ Field Recalibration and Bench calibration of Instrument.
¡¤ Replacement of new Instrument during re assembly.
¡¤ Loop Checks And Functional Checks Between Field And Mark V Speed Tronics Control
¡¤ Start up and commissioning.
¡¤ Technical Inspection Report Preparation.

13 JULY 2007 ¨C 20 APRIL 2007 OB OB GAS PLANT AGIP NIGERIA.
¡¤ Combustion Chamber Inspection On MS5001 GE Frame Five, 11KV, 25MW Power Generation Gas Turbine.
¡ñ Loop Checks And Functional Checks Between Field And Mark V Speed Tronics Control, On The Associated `Instrument Conducted. Technical Inspection Report Preparation.
01 AUGT 2007 ¨C 10 AUG 2007. OB OB GAS PLANT AGIP NIGERIA.
¡¤ Medium Inspection Intervention Of NUOVO PIGNONE 2HM/1 Natural Gas Recompression Compressor.
¡ñ Recalibration And Loop Test On Field Instrument Between And Control ABB PLC: Technical Inspection Report.
31 JULY 2007 ¨C 09 SEPT 2007. OB OB GAS PLANT AGIP NIGERIA.
¡¤ HP Major Inspection On MS1002B Fame 1 Gas Turbine Compressor And
¡ñ Major Overhaul On NUOVO PIGNONE BCL 306 Centrifugal Gas Compressor. Activities Include Field Instrument.
¡ñ Inspection, Functional Checks On The Auxiliary Equipment / Instrument, Recalibrations And Loop Test Of All Field Instrument With The Speed Tronic Control Mark 11:
¡ñ Technical Inspection Report Preparation.
13 SEPT 2007 ¨C 29 SEPT 2007. OB OB GAS PLANT AGIP NIGERIA.
¡¤ Hot Gas Path Inspection (HGPI) On MS1002B GE Frame One 5MW 6KV Power Generation Gas Turbine Power.
¡ñ Functional Checks on Control Instrument, Recalibration And Loop Test With Mark V Speed Tronic Control System Test With Mark V Speed Tronic Control System and Technical Inspection Report Preparation.
02 NOV 2007 ¨C 8 NOV 2007 CALABAR PORT NIPP POWER PROJECT NIGERIA.
¡¤ Preservation Of MS-9001E GE Frame Nine 135MW Generator At Calabar Port Nigeria With The Client NIPP NIGERIA.
¡ñ Scope Includes, Energization Of The Space Heaters And Design Of Its Control Circuit On Site; Technical Inspection Report Preparation.

13 AUGUST 2007 ¨C 04 SEPTEMBER 2007. OB OB GAS PLANT AGIP NIGERIA.
¡¤ Minor Inspection On Two (2) Power Generator 6KV, 4875KVA ANSALDO Synchronous Alternator. Activities Include
¡ñ Electrical Insulation Resistance Test And Measurement On Exciter Stator Winding And Rotor Winding.
¡ñ Main Alternator Insulation Stator And Rotor Field Winding Inspection And Rotor Field Winding:
¡ñ Technical Inspection Report Preparation.

Sudelettra Nigerian Ltd and Multinational Technologies Ltd Nigeria (AUG 1997 TO MAR 2007)
Instrument / Electrical Engineer, Agbara Offshore (Agip Oil Field) Gulf of Guinea
¡ñ Responsible for the Overall Maintenance, Installation, Commissioning, Control of all the Pneumatic and Electro Pneumatic Instrument and Equipment on Board.
¡ñ Responsible for the Power Generation and Distribution in the Offshore Installation.
¡ñ Installation, commissioning, Maintenance Repair and Control of all the Electrical equipment, and switch Gear control system, including HVAC system.
¡ñ In Charge of the Maintenance, Trouble Shooting and Control of the DUAL UPS, the DCS and PLC system (ABB SOLUTION INFI 90 TECH).
¡ñ Follow up and Supervision of Extra Ordinary Maintenance and Revamping on Board.
¡ñ Good Knowledge of Design and Interpretation of ED, PFD and P&ID Diagrams.
¡ñ Providing Support Services on QA / QC to External Contract Jobs on Electrical and Instrumentation Control on Board in Line with the Client¡¯s Procedures.
Involved in the Conduct of Periodical Electrical and Instrumentation control Inspections and Audit in line with IEC, IEE, ANSI, ASTM, and API standard etc.
¡ñ Reviews and Raise Plant Modification and Liaise with other Operation and Engineering.
¡ñ Establishing Maintenance frequency, for Equipment and tools Required for Cost effective Maintenance using the CMMS program.
Dec 1997 to Aug !998 Spencer Field Services Ltd Nigeria
Quality Control Engineer (Electrical Engineering).
¡ñ Quality Control and Analysis to ensure the job is to Specification
¡ñ Inspection/Supervision of Nigerian Agip Oil Company (NAOC) Electrical Engineering Projects.
Some projects supervised includes:
¡ñ Installation and Commissioning of Gas Engine Caterpillar generators (1000KVA, G3516) and 33KV Line, 500KVA, Step Down Transformer Linking Agip PortHarcourt and NEPA.
¡ñ Installation and Commissioning of Five (5) 75KW Ingersoll-Rand Air Compressors each at Ogbeinbiri Flow station of NAOC.
¡ñ Rural Community Electricity Project at Obiafu community. This involves Integration of the Community Power Grid with the OB/OB Gas Plant Power Turbine Generating system.
¡ñ Periodically holds meetings representatives of host communities and advice the management on necessary recommendations.
¡ñ Organize formal Safety training for all employee as well as advice Management on Safety incentives Schemes relevant to the overall Safety programmes.

EDUCATIONAL BACKGROUND

1990 TO 1996 UNIVERSITY OF TECHNOLOGY ENUGU STATE
COMPLETED BACHELOR DEGREE IN ELECTRICAL & ELECTRONICS ENGINEERING.

1983 TO 1988 IBEKU HIGH SCHOOL, UMUAHIA, ABIA NIGERIA.
COMPLETED O¡¯LEVEL WAEC.

LANGUAGE SKILL: ENGLISH (FLUENTLY, SPOKEN AND READ).
ITALIAN ( SPOKEN AND READ)

MEMBERSHIP OF PROFESSIONAL BODIES
¡ñ Council for the Regulation of Engineering in Nigeria (COREN). R. 10,951/83
¡ñ Nigeria Society of Engineers (NSE) Reg N0: 13761
¡ñ Institute of Electrical and Electronics Engineers (IEEE) Reg N0: 41294525.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 6997)

Go to Search Parameters...

Brief Description

QUALIFICATION :- DIPLOMA IN ELECTRICAL ENGINEERING WITH FIRST CLASS

MSc in Petroleum Engineering from the University of Oklahoma, USA with over 11 years of experience in both Industry and Academia to offer.conduct reservoir management activities and participate in interdisciplinary reservoir study teams. Bring a focus on performance of complex tasks.

Extensive experience in the petroleum, chemical, pharmaceutical, nuclear and environmental fields. Directed engineering, manufacturing, and construction efforts, including startup and commissioning for owners and contractors alike.

Control Systems (SIS/DCS/PLC) Engineer with >25 years of experience on various process, gas, refining, chemical and petrochemical plants/EPCM in Canada, Saudi Arabia, India & USA. „« Currently doing Detailed Engineering to SAT of Shell¡¦s Upgrader Expansion Project at Bechtel Canada Ltd.

All I&C design aspects. IN-Tools, Microstation, Autocad, MS Office suite software.

Over twenty-eight years in various assignments throughout the oil and gas industry, I have had twenty one years within the production side of the field, including work off the Gulf of Mexico and Venezuela. I have been in charge of multimillion dollar production platforms, responsible for monthly we

Vastly experienced electrical engineer, manager, superintendent, supervisor

Over 25 years of Diverse Design and Drafting Experience

instrument Engineer in OIL& GAS field

Write-up pre-commissioning, commissioning procedures, start-up schedules and reviewing. Provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules.

A piping designer that has multiple experience in piping industry. Holder of BS Mechanical Engineering with piping design experience over 7 years and more than 5 years of field assignments. A designer that has proficiency in 3D CADWorx, Microstation, AutoCAD, Navis Works, Laser Scan, & PDS trained.

12+ years of project and design engineering with subsea oil and gas installation contractors and consultants working on package management, site management, installation engineering, FEED and Detailed Design with a strong focus on Subsea Pipelines

Doctor of Philosophy in Science in Exploration Geophysics, IIT, Kharagpur, Calcutta, India (1977-82).• Master of Science, Technology in Exploration Geophysics, Osmania Univ., Hyderabad, India (1974-77).• Master of Information Technology, Curtin University of Technology, Perth, WA, Australia

Mechanical Engineer - Rotating Machinery & Packages

Sound knowledge of all aspects of Oil and Gas Field Process Engineering including Process Simulation, Pipeline Simulation, Preparing PFDs and P&IDs, Vessel Sizing and Specifications, Pump Hydraulics, Line Sizing, PSV Sizing and Flare Header Sizing, Depressurization and Blow down Calculation.

I am having 10 years experience in Oil & gas industry (Offshore & Onshore) in the field of Inspection, QA/QC & NDT. Certified CSWIP 3.2, API 570 & ASNT Level II-RT, UT, MT & PT

Areas of Expertise: Design of offshore structures performing Global and Local analysis of Floating Production Systems, Jack up Platforms, Semi Submersible Platforms & Jackets,

QA/QC-INSPECTOR/ENGINEER- E&I

9+ years of work experience in Content management & Data Cataloguing

Mechanical Engineer with 10 years of professional experience mostly in ESP and HPS designed worked for Schlumberger REDA and Woodgroup ESP. in artificial lift.

Groupement Berkine (Sonatrach-Anadarko Corporation) currently base in Hassi Messaoud, Algeria

Field Engineer in Middle East

I am a Petroleum Engineer of 14 years of oil and gas experience I have broad based skill that spread into financial and management and Reservoir modeling,seismic interpretation,seismic inversion ,great marketing skill.I have created a niche for myself in directional surveying in Nigeria.

Condition monitoring Engineer with 10 years experience in oil and gas industry(Vibraton Analysis,Thermography)

Oil & Gas Offshore Architect: Living Quarters / FPSO Accommodation Design

An Inspection / Static Equipment Integrity Engineer with 14 years experience in oil and gas industry.

Motivated drilling/completion engineer, with considerable hands-on experience and excellent credentials, seeks opportunity to perform at peak potential for an aggressive company. Has achieved a solid reputation for managing challenging technical operations efficiently and economically.

A motivated, team player possessing outstanding problem solving skills related to internal/external offshore operations, along with excellent communication and computer skills. Over 20 years of hands on engineering and operations experience in offshore drilling, subsea control systems, installation

8 Years Experience in NDT field. Performing NDT Inspection on Vessels, Columns, Cross Country Pipe Lines and Oil Field, Offshore Plat form, Petroleum Refineries, Fertilizers, Tanks and Fabrication Yards.

APPLY IN TECHNICIAN TURBOMACHINERY AND PLANT OPERATORS KNOWLEDGE

Piping design for PetroChemical,Refinery,Offshore,Marine,Mining,Pipeline,Power, Pulp and Paper fields. 15 years PDS experience. Field and fabrication shop experience. Capable of orienting towers and platforms. I pride myself with working with other disciplines. Willing to travel.

Senior/Principal Piping Designer/Checker

Structural Design, Stress Analysis, FE Analysis (Nastran / Patran, ANSYS 11.0) and Structural Calculations in MathCAD (Ref: Roark’s, API, ASME B31.3 and DNV)

24 years experienced Sr. Piping designer, well skilled in PDS, PDMS and microstation

Wide experience leading project engineer assignments working with design/engineering teams in the supervision, development and preparation of engineering and construction documents and drawings.

Mechanical Engineer - Project Engineer- Construction Supervisor – Mechanical/Construction Superintendent and Contract Administrator for Oil & Gas Industries.

Highly skilled in Electrical and Instrumentation field engineering and technical Advisor on GE control systems

Compounding & QA enginer

Mechanical Engineer

Please accept this cover letter and enclosed resume as my application for the position of Instrument Technologist with your organization.

More than 6 years work experience as a Project Engineer and successful in running 40 gas station projects.

Many years of work and academic experinces with the AutoCAD software and some classes in the ESRI -GIS software.

NAME:JOHN GOODDY

Master Electrician \ Instrument Tech \ PLC Programmer

Responsible for implementing and execution of water well drilling/work over programs given by Clients. Ordering materials required for Well Construction. Organizing and controlling the rig crew. Monitoring the daily drilling activity. Communicating with Client and Company.

MEng is a Staff Petrophysicist with 14 years experience specialising in petrophysical evaluation and 4 years in wireline/LWD operations. Career history includes working currently as a petrophysicist to support logging and coring operations, and performing petrophysical evaluations

Currently working as Senior Corrosion Engineer. Experienced in routine and non-routine corrosion mitigation and control activities, Topside inspection.

I am a postgratuate with 15 years experience in Oil/Gas - design of HV and LV from 132kV, 66kV, 33kV, 22kV, 11kV, 6.6kV & 440V level

Static Equipment Mechanical Engineer

Simulation studies, preparation of detail feasibility reports, FEED package, detail engineering, HAZOP, licensor selection, debottlenecking of existing units etc.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out