Resume - During 8 years experience in Oil & Gas industry, I was fully in charge of Reserv...

Misco Jobs

Resume #78654

CONTACT INFORMATION:
View contact information...

Reservoir Simulation: Salman Field Development Project, full field model whit 47 wells and more than 35 years History, Black oil model,E100; Hengam Field, exploration project, volatile oil, No History, compositional modeling,E300; Azadegan Field, Fahlian Reservoir, Development Project, Black oil model, E100

PVT Analysis: Upper and lower Arab reservoir in Salman Field which are used in Black oil model; Khoof gas reservoir which is used in Kangan&Dalan Reservoir model Salman Gas Field; Sarvak volatile oil in Hengam Field which is used in compositional model.; Kazhdumi, Gadvan and Fahlian in Azadegan Field which are use in Black oil model.

Static Pressure Analysis: MDT pressure point analysis for Upper and Lower Arab, Kangan, Dalan and Farghon Gas reservoir in Salman Filed; MDT pressure point analysis for Sarvak, Kazhdumi, Gadvan, Fahlian in Azadegan Field.

Transient Pressure Analysis: DST pressure analysis for Kangan, Dalan and Faraghon Reservoirs in Salman Gas Field, Modified Isochronal Test; Upper Arab Reservoir in Salman oil Field, Modified Isochronal Test; Sarvak, Ilam, Darian Reservoirs in Hengam Field, Flow after Flow Test; Kazhdumi, Gadvan, Fahlian Reservoirs in Azadegan Field, Conventional test (two open two closed).

Reserve Estimation: Using Montcarlo method in Salman and Hengam Field.

Material Balance: Oil Reservoirs in Salman Field and Azadegan Field.

Decline Curve Analysis: in Salman Oil and Gas Field.

Design DST,MDT,PSP, Acidizing program: In Salman Field and Hengam Field
* Six DST and sampling jobs Kangan&Dalan (Gas), Faraghon (Gas), Upper Arab (Oil), Sarvak&Ilam (Volatile Oil), Darian (Oil).
* Two PSP jobs in Upper Arab (Oil), Sarvak&Ilam (Volatile Oil)
* Three MDT and sampling jobs in Farghon (Gas),Upper Arab"U1-U8" (Oil), Sarvak&Ilam (Volatile Oil)
* Matrix Acidizing job with Diverter in Carbonate Reservoirs (horizontal and vertical wells)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 7051)

Go to Search Parameters...

Brief Description

Charted Engineering marien & mechanical engineering with PHD in Engineering management,20 Years experience as senior corrosion engineer in mining and petroleum industries. With 15 years in engineering management. Specialist engineer coating and Cp design.

I am a Project Manager/Mechanical Engineer with 33 years experience in both, International & local projects.

2003-2004 Veco Engineering Abu Dhabi 2002-2003 ABB s.r.l. Romania 2001-2002 ABB s.r.o. Czech Republic 2000-2001 T.I.A.b , Romania 1999-2000 Progeco Sistemi Group, Italia 1998-1999 I.P.I.P. , Romania 1980-1998 Upetrom S.A. Romania

Directing and maintaining the QHS&E efforts of the Region, to conform to Company policy, regulatory, and customer’s requirements. Developing Region policies, procedures, and related documentation. Interact with client HSE departments to ensure understanding of HSE Systems.

Ist class Chemical Engineer with vast experience in operation , Project Management , Engineering Management , Commissioning Management in Fertilizer , Petrochemical and refinery field.

Mechanic Engineer

A Uk based professional Chemical/ Process Engineer with 20 years experience in various aspects of Plant Operations and Design. Looking for ex-pat status or home based job/contract. Special interests include Environmental Engineering, solid/ liquid separations and wastewater treatment.

DCS system engineering design, configuration, installation & commissioning.

Take up Senior Corporate Management Level challenging position with multi-million Heavy industries

Develop and evaluate fire hazard analysis,various types of fire protection/detection and suppression systems, scope development, review of deliverables, identify user interface requirements and project coordination

Polyester, Nylon,extrusion,plant management, manufacturing, sales

Experienced, proficient and highly qualified Senior QA Engineer/Manager, able to provide 30 years of QA and QC experience in a wide range of disciplines within the oil and gas sector. Would consider a long term posting (if possible) in the UAE, Malaysia, Thailand, Singapore, Japan or Vietnam.

Dear Sir, I am looking for a job.Thanks for your email,

Over 30 years in oil and gas pipeline inspection. Welding and NDE CSWIP 3.2 CSWIP RT UT MT + ATTO

Petroleum engineer with 28 years experience. Primarily field exploitation but includes drilling, production, reservoir and facilities. Overseas for 14 years working on properties in Pakistan, Indonesia and New Zealand. Able to work under conditions with little support staff or management supervision

I have a Bachelors degree in Chemical Eng with over 20 years experience in Safety, Chemical Plant Operations and Process Engineering in multi national chemical companies like EXXON, Ciba-Geigy, & Shell. Presently working as Senior Process Safety Engineer with a leading company in Saudi Arabia

M. Tech (Electrical Engineering) Over 17 years experience in Design, construction and commissioning in Oil & Gas, Petrochemilcal and Power plant

32+ years Civil Engineering experience on Public Works, Utilities, Industrial, Commercial and Residential projects. Experienced in streets, highways, water systems, sanitary & industrial sewers, airports, site development, grading, drainage, underground piping and specifications

Drilling Engineer . I worked as a well site-drilling engineer, drilling supervisor, operations drilling engineer, drilling superintendent and promoted to drilling engineer specialist, after receiving PhD in Operations Management

Mechanical Engineer (degree) having over 24 years experience in Planning and Maintenance in large petrochemicals, oil/gas facilities. Specialized in Maintenance Planning and CMMS (Maximo).

I am a qualified Electrical engineer with a vast exposure of more than 21 years in the field of Detailed Engineering ,Operation /Maintenance,Erection/commissioning,Testing etc in search of a suitable job in UAE,Qatar,Oman

Sr. Piping/Hvac Designer with over 25 years of experience with a solid 3D modeling experience mainly in AutoCad. Currently studying Cadworx at home using a tutorial from Cadworx.

Mechanical/Petroleum Engineer with 20+ years of experience in artificial lift applications encompassing ESP and PCP (mainly Progressive Cavity Pumps). Development of programs to select PC Pumps and automation/controlling of PC Pump Systems based on surface data such as axial load and/or torque.

Principal Process/Facilities Engineer and Project Engineer/Manager Bachelor's Degree Chemical Engineering University of Oklahoma 1976 and MBA Studies Registered Professional Engineer American Institute of Chemical Engineers Gas Processors Association

Control, Safety Systems and Instrumentation Design / Maintenance / Operations Engineer

EXPERIENCE:Experienced in the design of the following systems: Fiscal Oil and Gas Metering,Offshore / Onshore,Fire & Gas/ESD,DCS, SCADA ,Telecommunication,Compressor Anti-Surge,Subsea Controls,Thruster Controls,Ballast Controls,Dynamic Positioning Systems,Hydroacoustics,Winch Controls.

Pipeline Engineers, Project Engineers, Project Managers

design of telecommunication systems namely SDH, DWDM backbone, OTN transmission systems, Microwave communication systems, FTTH systems like GPON, Metro point-to-point Ethernet, PAGA systems, UHF radio, CCTV, IDS systems for Service provider networks, business enterprise, Oil & Gas networks.

I am Chemical Engineer over 18 years of experience in all aspects of combined cycle chemistry, chemical/water treatment operation, quality control and analytical services as Plant Chemist/ Quality Control Supervisor in co-generation power stations. I am a Canadian citizen and willing to relocate.

Maintenance, Installation, Comissioning, Calibration, and Design And Documentation.

Manager shift Combined cycle power plant

Drilling Engineer, 10 years experience, hpht experience, Casing design, advanced well design, drilling fluids, directional drilling, drilling software,

I have 17 years of experience and presently working with Saudi International Petrochemical Co (Sipchem). I have got specialized Skills in maintenance planning and scheduling work process control, CMMS SAP R/3 PM module, Primavera P3 / MS project, RCM, Development and implementation of maintenance

Geologist with large experience in oil and gas exploration and development-Offshore experience and TDC unit manager and well site

Certified Welding Inspector (aged 30 years) with more than 10 years experience (Six years in Saudi Arabia having valid Driving License , Singapore & UAE) Oil & Gas / Petrochemical Projects & Semi-Submersible Rigs, Offshore / Onshore Process platforms seeks a challenging position in Inspection Field.

3D models PDS, Smart plant Review, PDMS, Autocad, Miicrostation, isometrics, Orthographic Drawing Production

Total 12+ years of experience (8 Years in India & 4+ Years in Middle East) in Quality Assurance / Quality Control, Inspection and Welding Engineering from Raw Material stage to Final Stage in Fabrication, Construction, during Shut Down / Maintenance, Repair / Renovation work in Oil and Gas, Petroche

Bsc of mechanical engineering 1994, onshore and offshore rigs expernice, joy stick touch screen rigs

Graduate Chemical Engineer with 08 years experience in field of Internal Corrosion and Chemical treament in oil and gas field.

Post Applied for: Planning Engineer / Sr.Planning Engineer (Primavera and MS-Project).

SOFTWARE SKILL: PRIMAVERA-P3 ,P5 ENTERPRISE , P6 PROJECT ENTERPRISE V.6.0 AND PM+

Seeking A Challenging Overseas Position in a professional org MSProj & Premevira

A highly experienced and versatile project management and professional engineer with over 15 years of engineering and project management experience in the Oil and Gas industries. Extensive experience in various types of oil and gas projects.

Algerian petroleum geologist with +8 years of experience in the area of petroleum exploration and geomechanical engineering. Looking for an international carrier in the area of petroleum geology or geomechanics

During 8 years experience in Oil & Gas industry, I was fully in charge of Reservoir Engineering. I have done 3 reservoir simulation jobs , PVT Analysis, Static Pressure Analysis, Transient Pressure Analysis, Reserve Estimation, Material Balance, Decline Curve Analysis ,field job supervisory

I am a HVAC /Electrical Lead technician with 22years experience 19 years in Multi-national oil companies both onshore and offshore for production platforms and perform preventive maintenance activities, job scheduling including preparation of JSA with relevant parties .

Electrical Engineer

Working with Multinational Oil Company HALLIBURTON WORLD WIDE LTD, in Pakistan as a Senior Service Leader.

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out