Resume - Currently working as the Service Manager for the CAT dealer in Papua New Guinea,...

Misco Jobs

Resume #78667

CONTACT INFORMATION:
View contact information...

Marital status: Single
Nationality: Australian
Date of Birth: 18/05/1974
Point of hire: Cairns, Queensland
Passport: Current and valid Australian # M 303 7912
Licences Certificates:
Australian QLD drivers licence HR & R # 70291852
OHS Certificates for: Dogman, Forklift and Overhead Crane 5T above.

Training Courses: Hitachi EX2500-5, 3 day course.
Cat. FPO (Fleet Productivity Optimization) 3 Day course, Hastings Deering Brisbane.
Cat. D11R-3, 3day course.
Cat. 300 series Excavator Introduction.
Cat. 785B, 789B, & 793B Introduction.
Cat. 3500 series EUI engines.
Cat. 793B hoist, steering and suspension systems.
Cat. Air-conditioning maintenance and servicing.
CN246 QLD electronics 1.
NM66 Plant electrics 2.
Introduction to electro-pneumatics (EP211), Festo Didatic.
Electro proportional hydraulics (EH611), Festo Didatic.
Hydraulics 1, 2, and 3, Festo Didatic.
Detroit diesel engines familiarisation 53-73 and 92 series
NR21 Automotive Air conditioning, Hedland College.
Fall arrest harnesses and attachment devices, Safety, Rescue sales Aust.
Introduction and Maintenance practices for TITON600 drills, 5 Day course.

Overview Notes:

When working on Caterpillar machines and there systems, I have had exposure to the on board VIMS system on the machines which use it. I also have had exposure to the use of the Caterpillar ET program, both for testing & adjusting and in the fault finding on the machines. I also have used the Caterpillar program SIS and all of its options. When on some PNG sites, I was involved in the designing and implementing of some training programs on the Haul truck systems also in the training of the National tradesmen.

Employment History: November 06 to January 08 Hastings Deering, Ok Tedi Mining Limited, PNG
Quality Assurance Supervisor.
I applied and got the QA Supervisors role at the Tabubil Branch of Hastings Deering PNG at OK Tedi. I transferred to this new position because I wanted to further my career and it was a good opportunity. I look after the QA at the branch of the components and parts that we offer to the customer. I also have been heavily involved with trying to achieve a CC 3 Star rating for the branch which is marked by the World wide system of Contamination Control implemented by CATERPILLAR.

February 06 to November 06 Hastings Deering, Ok Tedi Mining Limited, PNG
Senior Tradesman/ HEF
Employed at the OK Tedi mine where I'm responsible for providing technical support and supervision of the national tradesmen that also work for Hastings Deering. I'm also a part of a team of mechanics that look after warranty claims, breakdowns and servicing of the following equipment.
Equipment:
- Cat 777D, 789B and 789C Haul trucks
- Cat 16G and 16H Graders
- Cat D11N and D11R Dozers
- Cat 834B, 966F, 988B, 992C and 992G Front end Loaders
- Cat 3412Engine Gensets.
January 05 to January 06 Terex Mining, PT Freeport, Indonesia
Technical Advisor and Safety Advisor
I completed my 1 year contract at the Freeport Mine Site in Indonesia, responsible for supplying technical support and supervision to National Mechanics and staff in all situations. I'm also involved heavily with the Safety and environment team, to help lift O&K into a 5 star NOSA rating.

Main duties include:
* Supplying technical assistance on daily mechanical work.
* Preventative maintenance and service organisation.
* Scheduled component change outs.
* Fault diagnostics and troubleshooting.
* Analysing component failures and finding solutions.
* Parts interpretation and organisation.
* Ensuring support equipment and tooling is kept in high condition and completeness.
* Providing appropriate training and onsite mentoring of maintenance systems to National counterpart.
* Day to day supervision of the National workforce.
* Communicating with the Client about maintenance scheduling, accident damage, availability, safety and the supply of up to date information wherever needed.
* Meeting departmental targets for spending and costs by implementing productivity improvements and cost reductions.
* Being a positive influence and motivator, and to be seen as a role model and guide to the work force.
* Ensuring Terex achieves the highest safety, health and environmental performance, and implementing inspections, audits and general housekeeping practices to the workforce whilst striving for the highest NOSA ( 5 star) rating possible.

November 04 to December 04 Placements Aust. Porgera Mine, PNG
Senior Tradesman/HEF
Completion of a short term contract to supervise a major overhaul shutdown of an O&K RH200 shovel at the Porgera Gold Mine in the Enga Province of Papua New Guinea for Placer dome. This was a 4 week contract which our team completed successfully and efficiently before the time frame given.

July04 to October 04 Placements Australia OK Tedi Mine, PNG
Senior Tradesman / Supervisor
Haul truck Reliability Program (RIP)
Object: To raise the mechanical condition of the complete Haul truck fleet of Caterpillar 789B and 789C to a point of optimum mechanical reliability. Complete inspections and repairs of all components and systems. Prepare detailed reports for parts and planned work needed for each individual truck. To correspond all finding's to the Maintenance Management team for OK Tedi Mining.

February04 to July04 Hastings Deering, Mackay, Qld
Field Service/Heavy Equipment Fitter
I was based in the Moranbah area, where I was contracted by Hastings Deering at various sites in the Bowan Basin to perform Machine assemblies, Warranty repair's and both planned and breakdown maintenance of the following.
Equipment:
- Cat 777D, 789B, 789C, 793B and 793C Haul truck's
- Cat 992D, 992G Front end Loader's
- Cat 994 Front end Loader's
- Cat 5130B Excavator's
- Cat 16G, 16H, 24H Grader's
- Cat D10R, D11R Dozer's

May02 to February 04 Placer Dome Asia pacific, Porgera Mine, PNG Senior Tradesman / Supervisor
I was employed full time by PJV, in the Haul truck section where I was responsible for the "hand's on" supervision of the Papua New Guinea tradesmen undertaking the maintenance and repair's of Cat trucks.
Equipment:
- Cat 789B and 789C Haul truck's
- Cat 785B Haul truck's
- Cat 777A and 777B Haul truck's

April 01 to May02 Trainer Industrial Services, Tieri, Qld
Heavy Equipment Fitter
I was contracted to Thiess at the Oaky Creek coal mine, where I was responsible for the maintenance both planned and breakdown of all their machinery. I was also in charge of organising the scheduled servicing of the following.
Equipment:
- Cat 777B, 777D Haul truck's
- Cat 785B and 785C Haul truck's
- Cat 988B, 992C and 992G Front end loader's
- Cat D10R, D11N and D11R Dozer's
- Cat 16G and 16H Graders
- Komatsu PC1000 Excavator
- Komatsu 785-3 Haul truck's

June 00 to April 01 Placement Australia Misima Gold Mine, PNG
Senior Tradesman/Heavy Equipment Fitter
I was contracted at the Misima Gold mine on Misima island, PNG
Where I was responsible for the maintenance and servicing of the following.
Equipment:
- Cat 777B, 785A and 785B Haul truck's
- Cat 16G Grader's
- Cat D7L, D9N and D10N Dozer's
- Cat 824B Wheel Dozer's
- Cat 988B and 992C Front end loader's
- Hitachi EX700 and EX1800 Excavator's

*I also spent a period of four month's in the rebuild section where I repaired / overhauled – Hydraulic pump's, transmission's, final drives and brake group's for all of the equipment mentioned above.

Education History:
Primary School:
Newman Primary School
From 1980 – 1986

High School:
Newman Senior High School
From 1987 – 1991
Graduated from year 12

Apprenticeship:
Apprenticeship "Fitter and Turner"
From 1991 – 1995

Completed Hedland College Apprenticeship Degree
From 1991 – 1994

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6501 to 6550 of 7000)

Go to Search Parameters...

Brief Description

Technical, Managment, communication. Skills

Over six years experience working as an engineering and environmental geologist. Manage, coordinate and field supervise all drilling activities and field work for large scale geotechnical and environmental projects for government and industrial clients in the eastern United States and Africa.

Proven GIS Specialist, Project Manager and Dynamic Force for the Successful Implementation and Transformation of GIS Standards and Systems

Currently working as a procurement engineer in an Engineering Firm in Tokyo Japan engaged in EPC contract works for Petrochemical Plants with minimum 3 years experience

Talented and value driven professional with 9+ years of experience in health, safety, environmental and quality management. Motivated by challenge and rewarded through key initiatives that aid continuous improvement, as well as profitability and productivity.

My technical specialty lies in installation, troubleshooting and repairing Electrical, Mechanical, Automation production problems. I can install conduit, cable tray, main panels, and sub-panels, distribution transformers, ground systems and, wide variety electro-mechanical devices

Safety Professional with over 25 years experience and dedication to the industries with a Safety first and foremost attitude.

Expert in alingment of all kinds of equipment

I am a qualified artisan skilled in hydraulics and heavy duty equipment, currently working as a product specialist and studying towards a mechanical engineer diploma.

10 years Auto cad work experience with Design & Drafting background in the field of Fabrication structures, Sheet metal, Conveyors and Material Handling systems

Contracts Engineer

I have eight solid years of experience in various Production Operations positions in Shell Gabon. the positions that I have held required leadership skills, excellent team working spirit and good communication skills which I firmly believe to be most valuable attributes.

Geologist with Exploration Experience

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

NEBOSH Certified HSE advisor, HSE Trainer, Tech-IOSH member

Capable working with minimum supervision as solids control and drilling waste management eng, Mechanical skill, computer and management.

Welltest, Snior Operator, Supervisor. 5 years experience. Worked Worldwide.

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

Project Engineer wit BSc of Chemical Engineering and experiences in oil and gas

M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators

Perform concurrent duties of a project manager which involve the management of several Aramco and non Aramco projects in close coordination with the client and/or his representatives and with the engineering design team

Mechanical Engineer with proficiency in IDEAS, Nastran

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

Highly organized and innovative Manager with an exceptional track record of cost minimization through creative procurement approaches and proactive management style focused on building trust and improving departmental teamwork in fast paced union environments.

I'm over 5 years experience in multinational and overseas company. Have strength in knowledge and leadership. I'm always give the best and reach the best in every role that I walk with.

Time served pipefitter with 12 years experience.

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

Automation, Control, Electrical, Instrument, Field service engineer

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

Operations, Technical, Leadership, Surface, Underground, & International Experience

Experienced Project Controls Specialist in engineering and construction industry. Skilled in project cost, scheduling, analysis and forecasting .

analyst

Research and Development Metallurgist . Seeking career prospects in metallurgical processing, mineral resources (ferrous metals, base metals, precious and rare metals), process improvement and optimization, research and development, project management, process-business analysis

Coordinate services for wells,oversee project,finalize all paperwork and run daily reports for wells.

Skills summary: Gas and Oil Separation Plant (GOSP), Produced Water Treatment Plants, Installation of diesel Engine Power plants, Mechanical construction works such as Piping, tanks, Ducting, structurals, etc.

HE Electrician/Crane Operator with 5yrs. experience

P&PCM, MBA, B.Arch

Seeking a full-time position in Quality Assurance

Junior GIS Specialist ( Mapinfo pro. - Arc GIS .....).. Geologist

Retired PAF personnel having 25 yrs of experience and also remianed as instructor.

I am holding Diploma in Electrical engineering. In total have 7years of experience, 2.5years in Enginnering Industry and 4.5 years in Cement Industry

Currently working as the Service Manager for the CAT dealer in Papua New Guinea, Tabubil branch. There are 56 employees in the service department and the branch takes care of up to 40% of HD PNG earnings.

Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training

Sr operations Manager

I am a Coiled Tubing Engineer and Supervisor. I have worked both on and offshore for Schlumberger and Halliburton in various parts of the world over the past 5 years and have a very good track record.

IIT Graduate - SAP Implementation Exp - 2 yrs

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 [ 131 ] 132 133 134 135 136 137 138 139 140 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out