Resume - I have an extensive experience in detail design and stress analysis of piping an...

Misco Jobs

Resume #79030

CONTACT INFORMATION:
View contact information...

Senior Piping Engineer
-----------------------------------------------------------------------------------------------------------------------

SUMMARY OF QUALIFICATION

I have more than 18 years of experience working as Senior Piping/Pipeline Engineer at Multi National Engineering Company, which runs its business in Oil and Gas project. I had been working with several World Class Engineering Company such as MW. Kellogg, Houston, Toyo Engineering Corporation, Japan, Chiyoda Corporation Japan, Fluor Daniel Inc, Irvine, and Kellogg Brown and Root Singapore, Air Products Plc, and Bechtel London.

My strong background and experience is in Design and Stress Analysis of Piping System, Project Engineering, with special knowledge in Piping Material, Pressure Vessel, Rotating Equipment, and Project Management for various projects starting from LNG project, Gas Plant Project, Refinery Project, Petrochemical Project, Geothermal Project and Oilfield Project for Onshore and Offshore Project.

Offshore Project:
* South Arne Development North Sea Project, Brown and Root London 1997-1998
* OPQL ISND Phase II Expansion PS-1K Project QATAR 2003-2004

Total Offshore Experience: 4 Years

Onshore Project including Pipeline:
* Pluto LNG Project, for Woodside Energy, Australia, 2008
* Peru LNG Project and Pipeline Project, for COLP, Peru, 2007-2008
* Khursniyah Gas Plant Project, for Saudi Aramco, 2005-2007
* Brunei MCHE LNG Project, for Brunei Sdn Bhd, 2003.
* Duri Area-10 INFIEL PIPING and PIPELINE PROJECT, for Chevron Indonesia, 2000-2002
* 3rd Loading Dock Bontang LNG Project, for Badak LNG Indonesia, 1997-1999
* Gunung Salak Pipeline Geothermal Project, for Unocal Indonesia, 1995-1996
* Sea Water Pipeline Project, for Qatargas, 1994-1995
* Seraya Island Project, for Singapore, 1993-1994
* Ammonia and Urea Project, for Petrokimia Gresik, 1991-1993
* Bandar Abbas Refinery Project, NIOC, 1990-1991

Total Onshore experience: 14 years.

Management Role:
* Lead Piping Stress Engineer: 5 years
* Project Engineering Manager: 2 years

Total Experience:
* Piping Stress Analysis: 10 years
* Piping Design Engineering: 5 years
* Project Management: 2 Years

I am familiar with various design codes and standard produce by MW. Kellogg, Chiyoda Corp, Brown and Root Energy Services, Bechtel, Shell DEP, Chevron and Saudi Aramco.

DETAIL WORKING EXPERIENCE:

1. 13 DECEMBER – PRESENT: SAUDI ARAMCO, SENIOR PIPELINE ENGINEER

Position: Senior Piping/Pipeline Engineer
Project: Karan Gas Subsea Pipeline Project

2. 8 SEPTEMBER – 10 DECEMBER 2008: FOSTER WHEELER ENERGY LIMITED

Position: Senior Piping Stress Engineer
Project: Woodside Pluto LNG, Australia

Responsibilities:

* Review Stress Analysis Calculation performed by another stress engineer
* Review Piping IsometricS which have been done by Foster Wheeler India Engineering Office.

3. JULY 2007 – AUGUST 2008: Peru LNG Company, Hunt Oil Corp, London at CB&I Office.

Project: PERU LNG PROJECT
Position: Senior Piping/Pipeline Engineer

Job Responsibilities:
* Perform and Review Piping Stress Analysis for Compressor lines, Cryogenic Lines and LNG Circulation Lines to Loading Arm/Jetty using CAESAR II Program with Seismic Case.
* Review piping layout.
* Review seismic analysis and wind analysis for piping system.
* Perform and Review Piping Stress Analysis for LNG Tank, Compressor, Turbine, Loading Arm, MCHE lines.
* Review Mechanical vendor Drawings, such as Pressure vessel, Pump and drum.
* Prepare and Review Expansion Joint, Spring Hanger, and Cold Support and standard support.

4. SEPT 2005 – JULY 2007: Bechtel Corporation, London

* Project: Khursaniyah Gas Plant for Saudi Aramco
* Position: Senior Piping Stress Engineer

* Prepare Piping Stress Analysis for Compressor lines, Steam Lines, Flare Lines.
* Prepare Material Specification and Requisition
* Prepare Insulation, painting and coating specification for all material
* Perform Piping Wall Thickness Calculation and material selection.
* Review Valve requisition, vendor drawings, and review bid tabulation.
* Prepare standard detail for piping designer.

5. MAY 2004 – AUGUST 2005 Air Products and Chemicals, Inc, Hersham, England, UK:

Project: Air Separation Unit (Cryogenic Project): Argon Retrofit, Rustenberg, South Africa, Oryx GTL Qatar Project, Mopani Copper Smelter Project, MIGP Thailand.
Position: Senior Piping Stress Engineer

* Prepare Piping Stress Analysis for Compressor lines, Cryogenic Lines and Cold Box lines.
* Design pipe support.
* Review Mechanical vendor Drawings, such as Pressure vessel, Pump and drum.
* Design expansion joint and prepare the material requisition.

6. MARCH 2003- APRIL 2004 Kellogg Brown & Root Asia Pacific, Singapore seconded from KBR Indonesia

Assignment:
1. Project: OPQL ISND Phase II Expansion PS-1K Project QATAR (Offshore Project)
Client: Occidental Qatar Petroleum Ltd.
Position: Senior Piping/Pipeline Engineer

2. Project: Brunei LNG MCHE Installation Project (Onshore Project)
Client: Brunei LNG Sdn. Bhd.
Position: Senior Piping/Pipeline Engineer

5. 2000 – 2003: Senior Piping/Pipeline Engineer

Project: Area 10 and Area 11 Duri Oil Field Project
Client: Chevron Pacific Indonesia

6. JANUARY 1998 – NOVEMBER 2000 working with Joint Venture between PT. IKPT, Engineering and Construction, Indonesia, Chiyoda Japan and MW. Kellogg, USA:

Lead Piping Engineer
Project: 3rd LOADING DOCK PROJECT, BONTANG INDONESIA
Client: PERTAMINA INDONESIA

Job Responsibilities:
* Review P&ID and piping layout in term of stress analysis purposes.
* Perform stress analysis for LNG Transfer Line and Loading Arm to the Tanker, which had 5 conditions to represent the actual condition when the LNG is transfer into the Ship.
* Perform Stress analysis for LNG circulation line from Loading Arm at Ship.
* Perform Stress analysis for lines around LPG Tank
* Review Material Requisition for Piping Valve and any bulk material.
* Prepare technical document to design expansion joint as many as 118 pieces of expansion joint for LNG line with size as 30 inches.
* Communicate with Client Deputy Project Manager regarding the technical aspect of these 118 expansions joint.
* Communicate with Vendor (PATHWAY) about the design aspect and review all the technical aspect of the expansion joint.

7. FEBRUARY 1997 – DECEMBER 1997 Working with Brown and Root Leatherhead, UK

Senior Piping Stress /Pipeline Engineer
Project: South Arne Development Project at Danish Sea (Offshore)
Client: Amerada Hess

8. AUGUST 1995 – NOVEMBER 1996 Working with Fluor Daniel Inc, Irvine, CA, USA joint venture with IKPT.

Lead Piping Stress/Pipeline Engineer

Project: SALAK GEOTHERMAL EXPANSION PROJECT.
Client: UNOCAL GETHERMAL INDONESIA
Project value: US $ 250 million
Scope: Engineering, Procurement and Construction (EPC)

Job Responsibilities:
* Perform Basic Design at Fluor Daniel office at Irvine California for Power Plant using Geothermal Energy including transfer Geothermal from wells to the Power Plant.
* Involved in study and preparation of Plot Plant for Power Plant and Cross Country Pipeline.
* Perform preliminary stress analysis for Hot and Critical Lines for further consideration.
* Review all stress analysis calculation for critical lines
* Design spring hanger, prepare the data sheet.
* Design special pipe support and prepare the Material take Off for purchasing purposes.
* Conduct site survey and site supervisor for Piping cross country line and power plant.
* Involve in monthly meeting with project management and client.
* Solve any problem during construction as Field Piping Engineer.

9. JULY 1994 – JULY 1995 Working with CHIYODA CORP, JAPAN joint venture with IKPT

Lead Piping Stress Engineer

Project: QATAR LNG PROJECT at QATAR
Client: QATARGAS
Project Value: US $ 500 million

Job Responsibilities:
* Prepare piping design and stress specification, piping material specification and pipe support specifications.
* Review piping layout and equipment layout.
* Review Piping Material Take Off and prepare material requisition.
* Prepare Technical Bid Evaluation for Piping Valves and Fittings.
* Perform stress analysis for LNG (Cryogenic)and Sea Water Lines
* Calculate Loading at pipe support and structure to be given to the structure group.
* Design Special pipe support to handle as many as 220 ton horizontal load.

10. MARCH 1991 – MAY 1994 Working with: MW. Kellogg, USA and Toyo Engineering Corp, Japan joint venture with IKPT

Piping Stress Engineer
* Project: AMMONIA and UREA PROJECT at INDONESIA
* Project: SERAYA ISLAND PETROCHEMICAL Project, Singapore

Client: PT. PETROKIMIA GRESIK and SINGAPORE PETROLEUM COMPANY.
Project Value: US $ 250 million and US$ 150 million.
Scope: Engineering, Procurement and Construction (EPC)

Job Responsibilities:
* Perform loading data calculation for load of pipe at structure, pipe rack and sleeper.
* Perform stress analysis for lines around pipe rack, pump and pressure vessel.
* Perform stress analysis for critical lines at Turbine and Compressor, Boiler and steam line.
* Design special pipe support and indicate standard pipe support at piping drawings.
* Design spring hanger and the data sheet.
* As Piping Supervisor at construction work, to solve any problem during construction in term of stress matter.

11. NOVEMBER 1990 – MARCH 1991 Working with CHIYODA CORP, JAPAN joint venture with IKPT.

Junior Piping/Mechanical Engineer
Project: Bandar Abbas Refinery Project at Iran
Client: National Iranian Oil Company (NIOC)

Job Responsibilities:
* In house training for piping design, piping stress analysis and pressure vessel design
* Perform loading data calculation for load of pipe rack and sleeper.
* Perform stress analysis for lines around pipe rack, pump and tank.
* Design special pipe support and indicate standard pipe support at piping drawings.

COMPUTER SKILL

Stress Analysis Software: CAESAR II, AUTOPIPE (advance)
Piping Design Software: SMARTplant and PDMS Review.
Microsoft Office: Microsoft Word, Excell, Powerpoint (advance)

Education:
BSc in Mechanical Engineering

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 7040)

Go to Search Parameters...

Brief Description

Extensive hands-on international and United States oil and gas industry experience focused in the full spectrum of Exploitation geology (Development and Production), from mapping and geocellular modeling through prospect generation, operations and reserves reconciliation. TX Lic. #1455

Inspection/Welding Engineer

20+ Years in Drilling, Sr. Drilling Engineer. Land & Offshore

B.E with nearly 17 Years Experience as an Instrumentation Engineer in Construction, Commissioning and Start up, Maintenance support in Power and Oil/Gas plants (On Shore and Offshore) Projects.

21 years in oil and gas industry in field operations

Mechanical Q.C. Engineer and Safety Engineer in Construction, Consultancy.

Project Engineer

civil inspector, site manager, civil engineer

DCS engineering experience : HoneyWell DCS Experion C300 / C200 / TDC2000 / TDC3000 : over 8 year experience in Oil and Gas field in Canada: Revamping and Commissioning at site, and Testing: Another 10 years PLC experience.

Has 18 years + eexp in field of Automation and control and 7 years Middleast experience Previously employed with ABB and Invensys UAE .

Mechanical Engineer/Supervisor(rotating machinery)

Extensive experience of combined domestic and international on well logging industry

Results oriented Senior Piping Designer with experience in managing project scopes, costs, and schedules for numerous small to medium size projects.

Automation Engineer with a Instrument and controls background who has installed and commissioned various DCS Systems worldwide,currently working as a C&I Specialist in the middle east as a client rep. on site acceptance of Control,ESD and Fire & Gas systems.

Process Engineering Opportunity

Dynamic Positioning Control System Specialist

More than 15 years experience in instrumentation, process control, control system (PLC / DCS) and automation (SCADA) design, programming, commissioning and startup, and maintenance. Completed a large variety of the projects in energy, oil & gas, petrochemical process, and water treatment.

Sr Subsea Controls Consultant

A Post Graduate (M.Tech. – Electrical) after Engineering (B.E. – Electronics & Communications), supplemented with training on Project Management having total experience of over 28 years, including initial 20 years in Indian Navy and later 8 years in Project design for Utilities, Oil & Gas, Process

Petroleum Engineer, Safety Specialist.Managing, Administering, and Operating Safety and Environmental Health (HSE) programs. * Management/Budgeting. * Supervision. * Team Leadership. HSE/Strategic Planning and Program Development.

I have an extensive experience in detail design and stress analysis of piping and pipeline system for Oil and Gas Project for more than 18 years. I am familiar with International Code and Standards, EPC Company standard, and Major Oil Company Standard.

Pipe stress engineer

Currently a Senior Reservoir Engineer working with an Oil/Gas Major in Lagos Nigeria. I have had various trainings, both through formal courses and on the job. I worked in a studies team in Aberdeen, basically undertaking studies of hydrocarbon fields.

Over 46 years international experience in IT-Enabled EPC projects for onshore/offshore oil and gas, pipeline, petrochemical, chemical process and cryogenic plants, thermal power including cogeneration plants, refineries, iron and steel, pharmaceutical and other industrial plant construction.

Duties & Responsibilities in different Oil & Gas Operator Companies :

16 years of continuous experience in various field of construction in Oil & Gas, Petro Chemical Plants, Manufacturing Plants, Buildings and Infrastructure as a Lead Field Control Engineer, familiarized & having experience to different kind of works of a Planning Engineer, Schedule Engineer, Cost Con

Inspection in the field of Electrical & Instrumentation Works

Passed in diploma instrument & conrtol skills in dcs system and manage/conrol our staff

Automation, Control, Electrical, Instrument, SCADA Engineer - 30+ years experience

PDMS Piping/Mechanical Designer

20+ Years piping designer

Working for Petrofac International as Commissioning Engineer

Senior process engineer

Marine chief engineer and technical superintendent onshoreGood team player with excellent organization and motivation skills

I have 14 years experience in Piping Design and 5 years in PDMS piping design. I have been responsible for job packages start to finish, Isometric extraction, material extraction, survey & field investigation, P&ID changes, working with PDMS, all versions of Autocad, Microstation, and Cadworx

A Mechanical engineer with 17 years experience in marine,mechanical, hydraulics, pneumatics, electrical, elctronics engineer, Presently working as a hydraualic engineer in bosch rexroth, United Arab Emirates.

Materials Science and Mechanical Engineering, Solid lab skills in materials testing and examination, Failure analysis to determine the root cause. +10 years manufacturing & energy industry experience. Strong Computer skills-Stress analysis, Numerical simulation. Multi-languages

Eighteen years of combined experience in the petrochemical/petroleum and aerospace industries working for engineering contractors and operating companies. Experience with project management, project development, construction engineering, equipment maintenance/reliability, design, cost estimating.

15+ years of experience

Register Mechanical Engineer & certified 3.1 Welding Inspector.Speak , write, read english fluently.Well-versed in computer & different codes & standard like ASW,ASME,API & BS.Good knowledge of AUTO CAD & engineering drawings.

ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING, FIELD SERVICE, SUPERVISION

Petroleum engineering professional with diversified domestic USA and international experience in E&P

Senior Instrument , Electrical, Rotation, Engineer, Project Management

Highly experienced in dealing with Engineering, Project and Procurement coordination for Static equipments and Packages. Experienced in EPC,PMC,FEED and Study type of jobs and well versed with renowned Codes and Owner Company Standards. For further details, please refer my CV attached.

An experienced Manager with muti-skill in Quality Assurance, Quality Control, NDT, Offshore experience, Oil and Gas sector, Rig building projects, internal/external/regulatory audits, Interpretation of International codes and standards .

Experince at:: small and mid-sized projects involving integrity/rehabilitation/repair/construction of pipelines and piping systems – Oil & gas, Pigging operations, Pipeline design

Having more than 15 years of experience in the field of Installation,alignment and inspection of Rotating and static equipments in the field of Oil and Gas,Power ,Petrochemical projects.Can lead a team of engineers,foremans and work force involved in Installation,alignment and inspection of equipmen

19+ years of experience in Electrical Designer Field. Experience in Oil & Gas 3 Years and Power Plant Field More than 16 Years

PROFESSIONAL SKILLS : Sales Management; Sales Force Automation; Team Player and Leader; Project Management; Schedule Maintenance; Auto Cad; Caesar II ; Technical Writing; B31.3; Process Improvement; Strategic Planning; Microsoft Office

I am a petro;eum engineer, holding BsC in petroleum engineering in 1990 worked in drilling as drilling and workover company man and coordinator with Waha Oil Co. for more than 16 years., My experience in vertical and horizontal drilling, UBD, exploration and development , well completion,

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out