Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #79211 next resume »»
CONTACT INFORMATION:
View contact information...

SYNOPSIS OF PROFESSIONAL EXPERIENCE

* 24 Years of experience in Piping/ Pipeline Design Engineering for Oil & Gas of Onshore and Offshore facilities.
Officially certified by Intergrapgh of U.S.A. for PDS and AVEVA for PDMS.
Experienced in piping design team setup with selection of manpower,training to designers
And engineers.
Valuable experience of working with engineering consultancy,construction company as well as oil producing co.

==================================================================================Trainings and Certifications:

* Certified on PDMS by AVEVA Pte Ltd. Singapore

* PDS ( Plant Design System) certified by Rolta India ( on behalf of Intergraph U.S.A.)

* Microstation certified by Rolta India ( on behalf of Bentley U.S.A.)

* Propipe / Proflow / Proiso of ADEV U.S.A.

* Cadpippe Ortho / iso / P &ID certified by conoco of U.S.A.

* Autocad Certified by Institution of Engineers India

* Advanced Autocad Training course by Autodesk U.S.A.

SEA SURVIVAL TRAINING AND CERTIFICATES:

* Personal Survival Technique (PST)

* Helicopter Underwater Escape Training (HUET)

* Fire Prevention & Fire Fighting (FPFF) Certificate No.

* FPFF/009/2003.

* Elementary First Aid (EFA)

Summary of Prof. Exp.

June 2007 till today: NPCC Engineering Ltd. Mumbai
(Subsidiary of Abu Dhabi National Oil Co.)

June 1997 to till June 2007: Toyo Engineering India Ltd.
(Subsidiary of Toyo Engineering Corporation of Japan)

Sept. 1993 to June 1997: Dubai Petroleum Company, Dubai U.A.E.
(subsidiary of Conoco of Houston, Texas)

Dec. 1990 to Sept. 1993: National Petroleum Const. Co. Abudhabi U.A.E.

Sept. 1989 to Dec.1990: Ewbank International Consultants, Doha /Qatar
( Subsidiary of Ewbank Preece, Laondon )

March 1988 to Sept 1989: Hoechst India Ltd
(Subsidiary of Hoechst AG. Of Germany)

Oct. 1984 to March 1988: Kvaerner Powergas India Pvt. Ltd.
( Subsidiary of Kvaerner Group of Norway, previously known as Davy Powergas India Ltd.)

Job Responsibilities: following activities were done to meet the schedule requirements throughout the above working exp.

* ITB study, Proposal work, licenser package review,
* Work volume and engineering man-hour estimation,
* Manpower requirement and Activities control, monthly
* Progress report and man-hour analysis, inter dept.co-ordination. preparation of job close out report, participation in feed doc. preparation.
* Document List.
* Preparation of Equipment layout.
* Preparation of Piping layout involving Controlling piping deliverables.
* Preparation and checking of stress sketches.
* Pipe-Supporting arrangement for critical and non-critical lines. Designing special supports
* Checking Nozzle orientation.
* Vendor drawings review.
* Checking of piping isometrics and BOM.
* Attending design review meetings with the client.
* Co-ordination with other departments likes Process, Civil, Electrical etc. to finalise various interface requirements.
* To guide other engineers, designers, Cad operators for carrying out various activities.

June 2007 till today: NPCC Engineering Ltd.
Responsibilities ONGC MUMBAI HIGH 'NC'PLATFORM
Lead Piping Engr.
Bid doc. Study and manhour estimation.
Visit to offshore for 'NC' platform survey
Piping team setup and training.
Client co ordination.
Finalization of piping routing and detailing.
Guidance and checking of work for designers and
Engineers.

BRITISH GAS PANNA FIELD.
FEED Engineering work for platform PL-Panna Field.

June 1997 till 2007: Toyo Engineering India Ltd.
Responsibilities ONGC- C2-C3 extraction project.
Design Lead.
Design and development of piping design of process and utilities area.
Manhour Estimation,Plot plan Development.
Co ordination with projects dept. clients PMC
Review of PDS model daily basis and guidance to design team for any design change.
Stress analysis report interpretation and follow up.
PDS model 30,60,90 percent review and change as per client requirement.

Dubai Margham Gas Plant- Dubai U.A.E.
Gas Import and storage plant.
Location Dubai-UAE

Activities done- Study of site survey report.
Preparation of new piping design.
Man hours planning and drawing and document listing.
Team set-up of 4 designers,4 cad operators.one asst.engr.,one trainee engr.
Client meetings follow up for design completion.
Review and issue of final Ga's iso's,

Bharat Petrolem Refinery Mahul Mumbai
Osbl area design,layouting,controlling
5 draughtsmans,2 designers.
Complete existing and new pipe rack set up.
New tank farm and pumping station design.
New loading gantry design.

Butane-1 unit of SGC gas processing complex for National corporation of Uzbekneftgas. The design of this entire project has been Prepared with the help of PDS (Plant Design- System)
Surface condenser area of Urea unit of
Chambal fertilizers and chemicals.
NGL-4 project. Complete piping study layouts and bill of materials- of Qatar General Petroleum Corp. for estimation purpose.

Sept. 1993 to June 1997: Dubai Petroleum Co.
South west fatheh oil field.Rashid oil field
Projects Completed: Enhanced oil recovery project with provision Of new hydroclone separators and piping of that new slot additions for existing well head Platforms.

Addition of new test separator and its piping.
Revamping of water injection platform.
Fuel gas system upgrade.

Dec.1990 to Sept. 1993: National Petroleum Const. Co. Abudhabi

Responsibilities: Complete piping designing work for offshore as well as onshore oil operations.

Projects Completed: Adnoc khuff gas development project.
Interface of new piping to existing piping.
Received best performance award for this project.

ADCO Jebel Dhana
Construction of 3 nos. one million barrel crude oil storage tanks and its associated piping especially
64" dia piping. Fire fighting arrangement,Cupro-Nikel- Piping for existing tanks.

Total Abk
Provision of new piping into existing gas lift and Oil collection platforms for khuff-gas project.

ONGC Bombay High
SHG & SHP platforms in field subsea pipeline detailing,Riser clamps, Pipeline crossover.

ADMA-OPCO Ummshaif Complex. Modifications into existing piping of GG-2 /CP-1 platforms for new Tip platform.

Sept. 1989 to Dec.1990 Ewbank International Consultants. Doha-Qatar
Piping design detailing for offshore platformso n Autocad as well as manually.

Qatar General Petroleum Corporation.
Maydan Mahzam complex.
Revamping of compressor platform.

March.1988 to sept.1989: Hoechst India Ltd
Piping layouts, Eqpt. Layouts, Isometrics, Material take-off, pipe supports.
Fine Chemicals, Pesticides for Ankleshwar
Pharmaceuticals tablet plant for Mumbai.
Pharmaceuticals liquid injectibles for Mumbai.

Oct.1984 to March 1988: Kvaerner Powergas India Ltd
Garware Nylons-6 tyre cord project. Pune.
Sulinda-Indonesia, Poleyester Filament Yarns
Nocil- MCP and DDVP project.
Thirumalai Chemicals- Pthalic Unhydride- Petrochemicals project.
Gujrat Carbon – Carbon black project.

BEST PERFORMANCE AWARDS

* Adnoc Projects Directorate, Abudhabi for Adnoc Khuff Gas Development Project.

* Dubai Petroleum Company for Offshore Development.

* Margham Dubai Establishment-Dubai.

Personal Details

DESIGNATION

Piping Design Engineer
DATE OF BIRTH 2 nd MAY 1964

EDUCATION & QUALIFICATION: Diploma in Mechanical Engineering from Govt. of India
Piping Engineering course from Indian Institute
Of Technology Powai
Presently persuing BTECH. Mech Eng of Rajasthan University.
Diploma of construction mgt. NICMAR

REFERENCES
Will be provided

View contact information...
«« previous resume next resume »»
Search Results (Resumes 451 to 500 of 7040)Go to Search Parameters...
Brief Description
Maintenance Supervisor/Security, Maintenance Supervisor I/C, Project Manager, I/C Technician
20 years fire fighting experience.Now working in ADNOC Off Shore facility
Having 23 years of sound experience in piping and equipment design for Onshore / Offshore Oil and Gas, Petrochemical and Chemical Industries.
24 Years of experience in Piping/ Pipeline Design Engineering for Oil & Gas of Onshore and Offshore facilities.
Structure designer is make development basic design from engineer to make engineering drawing with make details, sections, connection types and discuss with other department like piping, civil, mechanical etc to make problem solve in engineering design or site.
Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress
PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.
SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE
Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems
Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken
More than fifteen years Experience, working with consulting engineering companies in Iran and Canada, with different assignments in variety of projects including EPC, R&D, master planning and feasibility studies
I am a professional process engineer with over 15 years experience
Free! Health, Safety & Environment Manager - Crane Inspector - OHSAS 18000 Lead Auditor - Senior Trainer - HSE Master Degree
Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience
A highly competent Senior Electrical/Instrumentation Engineer who has developed supervisory capabilities; QA / QC inspection skills; installation maintenance expertise; pre-commissioning, testing and commissioning competence; safety awareness; organising and co-ordinating flair; fault-diagnosis
More than 28 years of experience in oil industry
22+ years solid background of Piping Design in the petroleum contracting industry, covering all aspects of design activities
Experienced Completing and Producing Petroleum Engineer
Quality control,Quality Assurance,Inspection,Project Engineering,Surveillance coordinator
ASNT LEVEL 3 /WELDING PAINTING LIFTING I NSPECTOR
Enquiry specs for compressors, turbines, pump, blowers etc. , technical evaluation of bids, preparation of technical recommendations, checking & approval of vendor documents., interface with other disciplines, knowledge of API standards
17 years experience in EPC environment, on oil refineries and petrochemical projects
INSTRUMENT FIELD ENGINEER
Senior Corrosion Engineer with 14 years experience at metallurgy fields especialy corrosion & corrosion control. expert at painting, insulations,cathodic protection, materials selection, corrosion inhibitors, corrosion monitoring, coatings inspection . I am serious at work.
As a well sit geologist for six years, including one year for Coal Bed Methane, familiar with StripLog, SDL_9000 geological logging software, strong organization ability
Electric Engineer with MSEE with more than 15 years of work experience in oil and energy industry, occupying positions in electric maintenance, utilities plants operation and project engineering management and construction,
I am a postgraduate in civil engineering from the prestigious Indian Institute of Science, Bangalore. My major experience is in Oil industry. I have vast experience in Contracts Management in India & abroad.
Estimation of Oil and Gas EPIC Projects
Senior Electrical Engineer currently working For SonaHess Company (association Sonatrach & Amerada Hess), El gassi Hassi Messaoud.
• 12 years of experience in geology, geophysics and reservoir engineering, drilling operations (including horizontal, ubd, rotating BOP etc)
Mechanical Engineering graduate with experience in EPC - procurement manager
Experienced in sweet and sour, oil and gas projects. Execute projects on time and on budget while working as a team player. Solutions oriented with an eye toward bottom-line results. Organized multiple projects concurrently, with successful results in a fast paced environment. Effective communicat
Instrumentation Engineer
I'm Technical Degree in Geology (Associate Degree in Geology) and I'm looking for a job as Mud Engineer Worldwide.
In addition to my graduate engineering degree and more than 15 year of experience in power generation and chemical plants. I have currenly done my MS in Total Quality management.
Senior rotating equipment with 12 years experience with sound knowledge of project engineering and project management
B. Tech. (Electrical Engg.) from Rajasthan Vidyapeth (Deemed) University, Udaipur.
KEY COMPETENCIES
A highly skilled Petroleum Engineer with over 20 years domestic and international experience in Petroleum Industry as a Petroleum Engineer, experience in reputed International Service Company
Graduate in Mechanical Engineering having 15+years in Static Equipments & Packages Design & detail engg. engaged in Design & detailed engg. of pressure vessels, Columns for Oil & gas Applications and all other types of static equipments & packages, I have a good exposure in EPCM
Lead/Senior Mechanical Engineer- Oil & Gas, Chemical, Petrochemical and Energy Industries
Free! Oil and Gas Industry onshore construction civil engineering Superintendent with 20 years experience in overseas projects.
Twenty plus year's progressive experience in heavy industrial design, development, and construction for petrochemical refineries, upstream petrochemical, waste water treatment, power generation, chemical demilitarization facilities, Microchip facilities, LPG gas transitions, and the food & beverage
I am very talented and a hard worker. I have a good eye for any type of construction.
24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:
Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.
7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .
I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.
PDS Frameworks, Autocad, Microstation
Objective. Seeking an increasingly responsible position with an opportunity for professional challenge and growth while combining my areas of experience in the field of electrical works to support and enhance corporate goals and objectives. Educational Qualification. 1.Diploma in Electrical Engineer
First   1   2   3   4   5   6   7   8   9   [ 10 ]   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com