CONTACT INFORMATION:
View contact information...
- Date of Birth: 8th December, 1968
- Nationality: Iranian
- Marital: Single
- Qualifications: B.Sc. in Mechanical Engineering, 1993
- University: KHT University of Technology, Tehran, Iran
SUMMARY OF EXPERIENCES:
Mechanical Engineer with near to 16 years experiences in Oil & Gas (Onshore & Offshore), Chemical, Petroleum and Energy Industries as Lead, Support, Senior and Design Mechanical Engineer within different type of projects e.g. EPCM/EPC Concept, FEED, Detail, Fabrication and Revamp.
Responsible for Technical Support and Engineering in order to Design, Selection and Purchase of Mechanical Equipment and provision of engineering documents same as Calculations (Including Finite Elements Stress Analysis), General & Detail Drawings, Specifications, Mechanical Datasheets (MDS), Material Requisitions (MR), Technical Clarifications (TC), Technical Bid Evaluations (TBE), Purchase Order (PO) along with interfacing with other Engineering Disciplines, Clients, Procurement, Inspection, Construction and Suppliers to resolve the technical matters.
Good working knowledge of international codes and standards e.g., ASME, ANSI, ASTM, API, BS & PD 5500, TEMA, AD2000-Merkblätter, EN including EN 13445, PED, ATEX, CE Marking, DIN, PIP, WRC, ISO, UBC, AISC, NACE, AWS, AWWA, MMS, JIS, etc and general Material and Process information.
AREAS OF PARTICULAR EXPERTISE:
- Pressure Vessels (ASME, AD2000, EN 13445, PED, PD5500)
- Heat Exchangers (Including Shell & Tubes, Plate Types and Air Coolers) Mechanical Design
- Storage Tanks (Fixed Roof and Floating Roof)
- Mechanical Packages e.g., Dehydration and Glycol Regeneration, Sea Water Treatment (Dearation and Injection), Gas Compression Module, PSA Unit, Fuel Gas Treatment, Chemical Injection, Electro Static Dehydrator, Hydrocarbon Dew Pointing, Diesel Centrifuge, Diesel Generator, Seal Gas Conditioning, Electrical Heaters, Pedestal Cranes, etc
- Piping Mechanical Design
- Pumps
- Lead Engineering and EPC Activities
TRAININGS:
- Project Execution and Leadership (Fluor, the Netherlands)
- E-course in Project Management and Leadership (Confirmed by PMI), PrimLearning, Ireland
- Pressure Vessel Design, ASME sec. VIII div.1 & 2, Japan Steel Work (JSW), Japan
- Static Equipments (Pressure Vessels, Storage Tanks and Heat Exchangers), Azarab Ind., Iran
- Piping Mechanical Design, Ishikawajima Heavy Industries (IHI), Japan
- Water Tube Boilers General Design, IHI-Azarab Industries, Japan-Iran
- Steel Structures & Steel Stacks Design, IHI-Azarab Industries, Japan-Iran
- Steel Structures Weld Design, Toosi University, Iran
- Non Destructive Tests (Theoretical), MATN, Iran
- General Management, Iran
COMPUTER SKILLS:
Good working with computer programs and systems e.g. COMPRESS, PV-Elite, Microprotol, Dimy, Codecalc, Finglo, Tank, ANSYS, Nastran, Cosmos, AutoCAD, SolidWorks, Inventor, Mechanical Desktop, AutoPIPE, Windows and Microsoft Office, Lotus Notes, SAP, AMPxM (IDB), Projects OnLine,, ProArc, FrontRunner and Web Design
PROFESSIONAL EXPERIENCES:
- January 2009- Present
- Samadi Consultant Co. ( www.samadiconsultant.com ), Haarlem, the Netherlands
- Technical and Business Consultant
Provision of Technical and Business support for different industries as a Freelancer.
- June 2006- January 2009
- Fluor, Haarlem, the Netherlands
- Support / Senior Mechanical Engineer
Responsible for Mechanical Support and Engineering for Fluor B.V. e.g., provision/review/check of mechanical documents including Calculations, Specifications, Mechanical Datasheets, Requisitions, Technical Clarification, Technical Bid Evaluations, Purchase Order, interfacing with all other disciplines, Clients, Suppliers and Construction to resolve particular technical issues pertaining to mechanical equipment and documents.
Projects:
>> Butvar ARB3A Chemical Plant (Solutia – Monsanto), Antwerp, Belgium
Responsible for Mechanical Support, Design and Engineering in order to provision of Specifications, MDS's, MR's TBE's, TC's, PO's and participating in Kickoff Meetings in addition to Supplier documents review.
>> Kelsterbach Chemical Plant Relocation Project, EPC Phase (Ticona GmbH), Germany
Responsible for Mechanical Support, Design and Engineering of Nickel Alloy, Duplex and Stainless Steel Columns, Vessels, Reactors (AD2000, ASME, PED) and Storage Tanks (EN14015) in order to provision of TBE's, TC's, PO's and participating in Kickoff Meetings in addition to Supplier documents review
>> Kelsterbach Chemical Plant Relocation Project, FEED Phase (Ticona GmbH), Germany
Responsible for Mechanical Support Design and Engineering of Nickel Alloy, Duplex and Stainless Steel Columns, Vessels, Reactors (AD2000, ASME, PED) and Storage Tanks (EN14015) in order to provision of Specifications, Standard Drawings, MDS's and MR's.
>> Petrobrazi Gas Oil Hydro Treating Unit Modernization, EPC Phase (Petrom/OMV), Romania
Responsible for Mechanical Design and Engineering of Pressure Vessels (AD2000, PED), Heat Exchangers (TEMA, AD2000, PED), Air Coolers (API 661, ASME Sec. VIII, PED) and PSA Unit, including review/check of Suppliers technical documents/drawings and interfacing with all other Disciplines, Client and Suppliers to resolve particular technical issues pertaining to all above equipment and Suppliers' shop visit and review of design/fabrication/inspection matters.
In addition, responsible for modifications of existing equipment (Revamp) in order to achieving the new process requirements of plant.
- February 2006- May 2006
- Amid Engineering & Development Co. (Oil & Gas E.P.C. Contractor), Tehran, Iran
- Lead Mechanical Engineer
Responsible for Leading of EPC activities of Mechanical Department such as Engineering and Design, Man-hour and Cost Estimation, Supervision of Technical and Commercial Proposals and Contracts, Project Coordination, Supplier Selection, Personnel Selection and Coordination.
- August 2005- January 2006
- Technip, Jakarta, Indonesia
- Senior Mechanical Engineer (Mechanical Support Engineer)
Responsible for mechanical design and engineering works for Technip, including provision or review/check of Mechanical Datasheets (MDS), Specifications and Material Requisition (MR) for mechanical equipment and packages, review of Suppliers/Bidders technical documents and preparing the Technical Clarifications (TC) and Technical Bid Evaluations (TBE) and interfacing with all other disciplines, Clients and Suppliers to resolve particular technical issues pertaining to all above equipment and documents. Also responsible for Check/Review/Leading/Training of other Engineers as Support Engineer
Projects:
>> Kerisi Development Project (ConocoPhillips Indonesia Inc.)
Responsible for mechanical works (provision of Specifications, MR's, MDS's, TC's and TBE's) of following packages and equipments: Seal Gas Conditioning Package, Diesel Centrifuge Package, Sewage Treatment Package, Potable and Washdown Water Pumps, Electrical Heaters, MEG Regeneration Package
>> SiSi Nubi Fields Development Project (Total E & P Indonesia)
Design review and checking of Specification and MDS of Pedestal Cranes, Diesel Generator Package and Material Handling.
- March 2003-July 2005
- WorleyParsons, Kuala Lumpur, Malaysia
- Senior Mechanical Engineer
Responsible for mechanical design and engineering works for WorleyParsons, including provision/ review/check of Mechanical Datasheets (MDS), Specifications and Material Requisition (MR) for mechanical equipment and packages, review of Suppliers/Bidders technical documents and preparing the Technical Clarifications (TC) and Technical Bid Evaluations (TBE) and interfacing with all other disciplines, Clients and Suppliers to resolve particular technical issues pertaining to all above equipment and documents
Projects:
>> NRPOD Tapti Expansion (British Gas Exploration & Production India Limited)
Responsible for mechanical works (Provision or review/check of Specifications, MR's and MDS's) of following packages and equipments for Front End Engineering and Design (FEED) step: Gas Compression Module, Glycol Gas Dehydration Package, Fuel Gas Treatment Package, Pressure Vessels, Hydrocyclones, Coalescers, Air Coolers, Waste Heat Recovery Unit, Electrical Heaters, Water Treatment Package, Material Handling and Pedestal Cranes
>> Phu Horm Development Gas Production & Process Facilities (Amerada Hess-Thailand)
Responsible for mechanical works (provision or review/check of Specifications, M/R's, MDS's, TC's and TBE's) of following packages and equipments: Dehydration and Glycol Regeneration Package, Chemical Injection Package, Hydrocarbon Dew Pointing Package, Pressure Vessels, Pig Launchers/ Receivers and Storage Tanks.
>> Salman Offshore Facilities EPC2, Iran
Concept and detail design of mechanical equipment for Processing Platform, Wellhead Platforms, Gas Lift Platform, Living Quarters Platform and Oil Riser Platform consist of review of Material Selection Report, Mechanical Equipment Design Criteria and provision of Specifications, MDS's and MR's, TC's, TBE's and Suppliers documents review for Pressure Vessels, Pig Launchers/Receivers, Tanks and Air Coolers
>> Sirri "C" & "D" Oil Fields Development, Iran
Concept and detail design for mechanical equipment of new Oil Plant and Seawater Lift and Injection Packages consist of provision of Specifications and MDS's for Pressure Vessels, Heat Exchangers, Electrical Heaters, Crude Heater Package, Electrostatic Dehydration Package, Instrument Air Package, Sand Filter Package, Chemical Injection Package and Seawater Deaeration and Injection Package.
>> Melut Basin Oil Development Facilities, Sudan
Package Engineer of 9 Electrostatic Dehydrators packages
- September 2002-February 2003
- Kherad EPC Company, Tehran, Iran
- Head of Mechanic & Piping Group
Responsible for activities of Mechanical and Piping Group as follows:
- Water Treatment Platform consists of Sanitary, Potable and Industrial Water Packages for offshore platforms- South Pars, Phase 5 & 6 (Agip-Eni), Iran
- Fuel Gas Suppling Systems for Damavand Power Plant, Iran
- Provision of TC and TBE for technical and commercial proposals of Sub-contractors
- Provision of technical and commercial proposals for bids
- Interfacing with clients regarding to mechanical aspects of projects
- Supervision of engineering works of Sub-contractors
- Interfacing with fabrication yard
- April 1999-August 2002
- National Iranian Gas Company (NIGC), Tehran, Iran
- Senior Mechanical Engineer of Gas Treating Plants
Responsible for engineering of mechanical packages, equipment and components for gas processing plants consisting of fixed and rotary equipment and piping. Particular responsibilities were as follows:
- Provision of Purchase Order Specifications (POS) and intends for mechanical packages, equipment and components, equipment and components such as Boilers, Packages, Vessels, Heat Exchangers, Filters, Pig Launchers/Receivers, Heaters, Pumps, Valves and Piping Components
- Provision of technical documents for bids
- Technical evaluation of bidders
- Technical evaluation of technical proposals for POS's
- Supervising and accompany with NIGC's consultants and Suppliers in the engineering steps as client
- Engineering works for in operation Gas Processing Plants
Projects:
- Khangiran Gas Treating Plant, Iran
- Ilam Gas Treating Plant, Iran
- Parsian Gas Treating Plant, Iran
- Tabnak Gas Treating Plant, Iran
- Bidboland Gas Treating Plant, Iran
- Sarkhoon Gas Treating Plant, Iran
- March 1993- March 1999
- Azar Ab Industries Company, Tehran, Iran
- Lead / Coordinator / Design Engineer
I started my job as graduated mechanical engineer and during working in Azar Ab I had following responsibilities as Design Engineer, Project Coordinator and Lead Engineer of Design Team.
Responsibilities:
- Mechanical design team coordination
- Design of Pressure Vessels consists of provision of detail design, calculation sheets and detail drawings.
- Design of Storage Tanks (Low Pressure and Atmospheric with Fixed or Floating Roof)
- Mechanical design of Heat Exchangers (TEMA type)
- Piping mechanical design
- Design of Steel Stacks and Steel Structures of Storage Tanks and Boilers
- Provision of technical proposals and weight estimations
- Provision of Purchase Order Specifications (POS) for materials
- Technical review of technical proposals for POS's
Projects:
Khark 1,330,000 bbls Floating Roof Storage Tank, Arak Petrochemical Complex, Tabriz petrochemical Complex, Khorasan Petrochemical Complex, Bandar Emam, Petrochemical Complex, Khangiran Gas Treating Plant, Teheran Oil Refinery and Abadan Oil Refinery
- May 1992- July 1992 (3 Months)
- Moshanir Power Engineering Consultants Co.
- Trainee
Training in Mechanic / Piping Department and study of Piping Codes and Standards e.g.; ANSI B31.1, B31.3, B31.4, B31.8, Mechanical Design of a 8" pipeline and stress analysis by Super Sap and preparing the final training report.
View contact information... |