Resume - Diploma in Electronics And Telecommunication Engineering. 18 years experiance in...

Misco Jobs

Resume #79223

CONTACT INFORMATION:
View contact information...

Resume

Position applied: - Instrument Technician (((( General Electronic Instrument Trades Person.(Skill Assessment was done By Trades Recognition Australia and this is the occupation nominated for the Resume holder.)

Personal Details
Date of Birth 14th March 1963.
Passport Number G0396120
Educational Qualification

Qualification Institution City/Country Period
From To
Diploma in Electronics and Telecommunication Engg. T.M.E.S. Polytechnic, Board of Technical Examinations. Mumbai Jalgoan/India 05/1985 05/1988
BS.c Part - 1 Indore University Indore/India 07/1980 08/1982
Higher Secondary School Certificate Examination Citizen Higher Secondary School Nepanagar (M.P)/India 07/1969 04/1980
Working experience and the position held during the period from 19th Feb.1990 till date.

Dates Name of Employer City & Country Designation
From To
1st June 2004 Till Date The Baroda Rayon Corporation Ltd. Udhna,
Surat, India Assistant superintendent (Instrumentation) in Viscose filament yarn plant
18th Feb.1993 1st June 2004 The Baroda Rayon Corporation Ltd. Udhna,
Surat, India Instrument Technician in Polyester POY Plant
11th June 1991 17th Feb. 1993 The Baroda Rayon Corporation Ltd. Udhna,
Surat, India Instrument Technician in Nylon Plant
11th June 1990 10th June. 1991 The Baroda Rayon Corporation Ltd. Udhna,
Surat, India Trainee Instrument Technician in Nylon Plant
19th Feb.1990 11th June 1990 The Baroda Rayon Corporation Ltd. Udhna,
Surat, India Temporary Instrument Technician in Nylon Plant(Caprolactum recovery expansion project)
26th Dec. 1995 15th June. 1996 Thai Baroda Industries Ltd. Rayong, Thailand Shift Instrument foreman in Nylon-6 Tire Cord Plant in Thailand.
Key Skills:-

1 Inspect and test operation of instruments and systems, to diagnose faults using pneumatic, electrical and electronic testing device and precision measuring instruments.
2 Consult manufacturers manuals, circuit diagrams and blue prints to determine tests and maintenance procedures for various instruments used for measuring and controlling flow, level, pressure, temperature, chemical composition and other variables in manufacturing and processing.
3 Repair and adjust system components such as sensors, transmitters and programmable logic controller or remove and replace defective parts, circuit boards, power supplies etc.
4 Perform schedule preventive maintenance and complete test and maintenance reports.
5 Install control and measurement instruments on existing and expansion projects.

Job responsibilities as Temporary and Trainee Technician:

During this training period I gained hands-on experience on the basics of instrumentation i.e. repairs, maintenance, calibration, routine maintenance of process and control instruments in the plant and workshop. The following jobs were performed:-Repair/change/calibrate different type of pressure and temperature gauges, differential pressure gauge, receiver gauge, compound gauge and vacuum gauge, calibrate pressure gauge with dead weight tester, pump pressure etc, temperature gauge by electrical oven calibrator and receiver gauges by 3 to 15 Psi air supply,Overhauling of solenoid valves, actuators, and Rota meters Attend leakages in control valves by changing gland.

Job responsibilities as Instrument Technician:

As an Instrument Technician the main responsibilities were:-Attending preventive maintenance and shut down jobs.Installation calibration and commissioning of new instruments and control panel.Loop checking and logic function testing.Evaluation, diagnosis and rectification of instruments and system faults.
I have worked on servicing, maintenance and troubleshooting of following systems and instruments.
1 Transmitters ( conventional and smart) For the measurement of:-Pressure-strain gauge type, Temperature-Thermocouple& RTD.Flow – Mass flow meter, Oval valve flow meter, Magnetic flow meter, Level – Nuclear type, Ultrasonic type, capacitance type.
Calibration of smart transmitter for different services such as liquid, gas, steam or corrosive fluids and operation such as suppressed, center or elevated zero according to the process requirements.
2 Weighing balance (analog and digital) For the chemical analysis in quality control department in the lower range from 0 to 250gms up to six digits after decimal and upper range from 0 to 50 tons used for loading raw materials, on line additive system during batch process, lorry weighing and the packaging of final product in the packing department.
3 Control valves (both with conventional and smart positioners) Calibration for reverse and forward mode, split mode, fail safe mode etc. Overhauling of valve by removing all parts such as diaphragm, actuator, stem, lapping of the seat and re-assembling on/off valves for example ball type, butterfly type, knife gate type, slam gate type, slide gate type and diverter type valve.
4 Controllers (micro processor based electronics and pneumatic). Calibration of all types of indicators, controllers, totalizes, timers, digital gauges, hooters, annunciaters, scanners etc. All types of quality control instruments like Ph meter, conductivity meter¸ Karl fisher moisture meter, auto piston burette, tentiometers, stroboscope, anemometers, spectrophotometer, yarn tensile strength tester.
5 Shift duties During the shift duties worked individually and attend the entire running fault independently. I was responsible for detection, rectification and elimination of any instrument problems with minimum time frame. On line preventive maintenance of all necessary instruments had to be carried out with utmost care and safety.
I had worked as Instrument Technician during the erection and commissioning of P.O.Y plant comprising of six lines of spinning extruders (in collaboration with Cheil Synthetics South Korea and Barmag from W.Germany).The following activities were carried out in different departments:
1 Receiving instrument panels, inspecting and testing control systems. Receiving testing and installations of various instruments. Installation of cable tray, instrument supports, cable laying, cable dressing, cable ferruling, cable glanding, termination both at field and panel, conducting continuity and megger tests for correct and trouble free cabling.
2 Participated in different loop testing, checking panel and field instrument operations, calibration of instrument alignment of pneumatic and electronic instruments.
3 Participated in erectioning, commissioning of six Barmag make Extruders.(Model 12E4/24D)
4 In take up area high-speed winders of Barmag make model SW46S and SW4S and Reiter make J7/A3 -144 such winders were installed and commissioned
5 In continuous chips drying area two dryers of 15 tons capacity each and one of 30 tons capacity installed and commissioned.
(Make:-Rosin Egg co ltd Stourbridge (UK), Nara Japan.)
6 PLC of Siemens and Allen Bradley were installed for chips conveying to different storage tanks and finally to Extruders.
Participated in erection and commissioning of air Compressors and Booster Compressors of K G Khosla and Ingersoll-Rand make. 7 Centrifugal chillers of Blue Star and Volta's make. Air Dryer of Insultek and Chemac make.
I have got deep knowledge of all types of drives specially Ac Drives. I am perfect in stripping of power card, microprocessor card, triggering, interface and control card, power transistors, thyristors and all other components. I can attend inverters of following make and capacity. (Siemens Simovert P and V type 6SE3450 (4KVA), 6SE3575 (82KVA), 6SE3611 (120KVA), 6SE2133 (22KVA).Maidensa Thyfrec V500 12.5 & 33KVA.Delta VFD-A 1.9 KVA.)

Job responsibilities as an Assistant Superintendent:

1 Maintain workshop activities, guiding the Technicians and Mechanics to promote effective troubleshooting and quick rectification.
2 Preparing prototype circuits and test jigs for maintenance and calibration of various modules in plant.
3 Scheduling the routine maintenance and preventive maintenance.
4 Co-operation with other departments in solving complex plant problems.
5 Making daily reports, instrument history and log sheets.
6 Making monthly manpower schedules.
7 See that the safety precautions are followed especially in dangerous and hazardous area to ensure accident free activities.
8 Maintain the service manuals, circuit diagram and making changes after modifications.

Job responsibilities during the deputation to Thai Baroda Industries Ltd:
(As a shift Instrument Foreman)
I was responsible for attending all the breakdowns, shutdowns, troubleshooting and rectification of faults during the shift hours. Looked after the maintenance of instrumentation and control system in all section of Tyre cord plant such as polymerization, lactum recovery, spinning, twisting, weaving, dipping and utilities.

Reference
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 6984)

Go to Search Parameters...

Brief Description

Over 25 years of teaching practical and theoretical in the field of mechanical maintenance in the Philippines and Middle East

Twenty(20) years of experience in detail engineering/FEED/PMC of petrochemical complex/refinery/major industrial projects. 11 years wotking in middle east countrirs. Familiar with international codes and standards.

A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects Having a Degree – Marine Engineer, (Ship Engineer)

Proven ability to provide Industry initiative and leadership. 20 years of experience. Extensive SCADA, PLC, DCS and HMI Project Management Consulting knowledge.

Field Engineer

GRADUATE DIPLOMA HOLDER (3 year fulltime study) in MECHANICAL ENGINEERING, having Certifications as SENIOR WELDING INSPECTOR (CSWIP 3.2) -TWI LONDON, NACE (USA) COATING INSPECTOR LEVEL 1 – CERTIFIED, NQA (UK London) Certificate of Training in ISO 9001-2000 QMS Auditor, ASNT LEVEL II-RT,UT,MT,PT

Petrophysicist, Log analyst

He is the Manager of Technology Development in Exploration & Production in the Corporate Direction of Strategic Planning of PEMEX. Previously, he was Well Productivity Manager in the Technology and Professional Development Vice-presidency of PEMEX Exploration & Production. Also, he has been the head

QA/QC engineer/inspector in piping/pipeline and facilities construction in oil/gas. And an HND in welding/fabrication .

Have wide-ranging experience in Oil & gas (both Onshore & Offshore), refinery and petrochemical industries with good exposure towards Distributed Control Systems, Safeguarding Systems, Fire & Gas Systems and various types of Field Instruments.

I am a 3D PDS piping designer I work in various field of engineering, mostly oil & gas I have also knowledge in structural designing

Geologist, with 18 years of experience in the hydrocarbon sector, working in Venezuela, Trinidad and Tobago, Brazil and Mexico. Good command of computers. Experienced working and studying in a multicultural and diverse environment - Excellent interpersonal, communication and teamwork skills.

Degree: B.E. (Architect) Construction, Civil Works and Buildings expertise & HVAC installation.

Seeking challenging Position in Project Management where I can use my Experience, Market Exposure, Management Skill and Communication to achieve the high goals set by the organisation

7+ Yrs Exp in Mechanical CAD/FEA/CAE/CFD

I have 10 years of experience in E&P business, evaluating basins interms of potential, play maturation, volumetrics,maturing prospects, interpreting seismic data, building geological and facies model, well operation, seismic inversion, fluid substitution modelling, porosity estimation, AVO analysis.

Well Service / Wireline / Snubbing / Workover Supervisor

Over 18 years of combine experience in Oil and Gas mostly in Engineering Design projects from FEED to Detailed design for Offshore and Onshore projects, Subsea structures, Structural Piping design, Mechanical, Electrical and Civil work, and other similar structures and equipment details, assemblies

Field & office design, using PDS program, review drawing before send to approved

Procurement Buyer – at Snamprogetti Romania a company of Saipem Responsibilities: - responsible for the process of Liquidated Damages

Senior workover & completion operations supervisor with 7 years experience in HPHT oil wells in different workover activates, gained master degree in petroleum technology, BSc degree in Petroleum Engineering & recently warded IWCF certificate drilling supervisor level.

SUMMARY OF EXPERIENCE Eleven (10) years of very sound technical proficiency as a “Sr. Piping Designer / Draftsman”in the Oil & Gas Field, Petrochemicals Refineries, Piping, Tank farm Area’s, Platform Piping, Jacket Piping, Pipe Racks & Process Equipments, Cross Country Pipelines including pumping s

Hands on experience on High Pressure Mobile Hydraulic Systems (Closed Loop & Open Loop Systems), which includes Variable & Fixed Displacement Hydraulic Pumps & Motors, Various types of Hydraulic Valves, Proportional Valves, and Electro Hydraulic Actuators, Hydraulic Cylinders.

Diploma in Electronics And Telecommunication Engineering. 18 years experiance in instrumentation field ,specially caliberating ,servicing ,repairing electronics instruments

Specialist in QA/QC-E&I, having more than 17 years experience in large size Electrical and Instrumentation construction works

Bachelor of Engineering (B.E) ¨C Electrical and Electronics (1996 to 2000), with 72% at Bharathiyar University, Coimbatore, Tamil Nadu, India.Master of Business Administration(MBA) ¨C Annamalai University,Chidambaram, Tamil Nadu, India.

Experience in Design and engineering of Pressure Vessels, Heat Exchangers, Columns, Reactors, Storage Tanks as per National and International Codes like ASME Section VIII Div. 1 / Div. 2, TEMA, API 650/620, API 660, API 661, WRC ,UBC, IS 875, IS 1893, ASCE, IBR and etc.

Project Controls Estimator

Power Industry Plant Manager - Over 35 years of progressively diverse experience encompassing electric utility generation operation and maintenance, reliability improvement and facility management

i have worked with many multi national firms.I want to obtain a position of Plant manager/Maintenance manager/Service manager in your company. I have done courses under shell company Safety awareness. Incident and injury free. Defensive driving. Safety induction.

35+ years as Drilling Engineer, Drilling Supervisor, and Drilling Superintendent

Project Engineering, Construction, Contracts, Commissioning, Start Up.

Piping DEsign Engineer with 13 years of experience in the field of refinery, petrochemicals, fertilizers. Experience in layouts, materials, stress analysis. Presently working with KNPC, Shuaiba Refinery, Kuwait

Technical Professional with over 20 years global experience in Petroleum Engineering, Intervention Services, Project management, On-site Supervision, Proposal and Report preparation, Contract preparation and Administration.

A hardworking and highly competent Electrical Engineer

A petroleum geologist proficient in interpreting and integrating well logs, core analysis data, petrology, 2D and 3D seismic, well test and production data to develop prospects and drilling opportunities leading to the economic production of hydrocarbon.

QA design and Quality Control including conduct of coordination and various inspection activities on mechanical packages in UK, Europe, USA, Middle East and Far East. Computer system / procurement activities.

My objective is to start a new career in Indonesia that would allow me to expand on my twelve years of sales, marketing and contract experience in the service sector for the Indonesian Oil, Gas and Geothermal business after retiring from Schlumberger.

Charted Engineering marien & mechanical engineering with PHD in Engineering management,20 Years experience as senior corrosion engineer in mining and petroleum industries. With 15 years in engineering management. Specialist engineer coating and Cp design.

I am a Project Manager/Mechanical Engineer with 33 years experience in both, International & local projects.

2003-2004 Veco Engineering Abu Dhabi 2002-2003 ABB s.r.l. Romania 2001-2002 ABB s.r.o. Czech Republic 2000-2001 T.I.A.b , Romania 1999-2000 Progeco Sistemi Group, Italia 1998-1999 I.P.I.P. , Romania 1980-1998 Upetrom S.A. Romania

Directing and maintaining the QHS&E efforts of the Region, to conform to Company policy, regulatory, and customer’s requirements. Developing Region policies, procedures, and related documentation. Interact with client HSE departments to ensure understanding of HSE Systems.

Ist class Chemical Engineer with vast experience in operation , Project Management , Engineering Management , Commissioning Management in Fertilizer , Petrochemical and refinery field.

Mechanic Engineer

A Uk based professional Chemical/ Process Engineer with 20 years experience in various aspects of Plant Operations and Design. Looking for ex-pat status or home based job/contract. Special interests include Environmental Engineering, solid/ liquid separations and wastewater treatment.

DCS system engineering design, configuration, installation & commissioning.

Take up Senior Corporate Management Level challenging position with multi-million Heavy industries

Develop and evaluate fire hazard analysis,various types of fire protection/detection and suppression systems, scope development, review of deliverables, identify user interface requirements and project coordination

Polyester, Nylon,extrusion,plant management, manufacturing, sales

Experienced, proficient and highly qualified Senior QA Engineer/Manager, able to provide 30 years of QA and QC experience in a wide range of disciplines within the oil and gas sector. Would consider a long term posting (if possible) in the UAE, Malaysia, Thailand, Singapore, Japan or Vietnam.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out