Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #79559 next resume »»
CONTACT INFORMATION:
View contact information...

Educational Qualification: B.E. (Mechanical),
Bharathidasan University,
Tamil Nadu, India.

Additional Qualification:
American Welding Society (AWS)

Certified Welding Inspector (CWI)

NDT Level II in ASNT

Ultrasonic Testing.
Radiography Testing.
Magnetic Particle Testing.
Liquid Penetrant Testing.

Professional Experience:

Overseas Experience:

Currently working as plant inspector in Dolphin Energy Limited, Raslafan, Qatar through Germanischer Lloyds for Shut down period.

Company Name: Al-Brayoni Company (SABIC Group)
Saudi Arabia.
April 2008 – July 2008.
Work as PLANT INSPECTOR during a
Shunt down period.

Company Name: Sadaf Petrochemical Company (SABIC Group)
Saudi Arabia.
January 2008 – March 2008.
Work as INSPECTION ENGINEER during a
Shunt down period.

Company Name: Abu Dhabi Gas (ADGAS), Das Island
Abu Dhabi, UAE.
September 2007 - November 2007.
Work as INSPECTION ENGINEER during a
Shunt down period.

Responsibility

Carry out inspection activity as per ITP (Inspection Test Plan) given by Client.
Carry out Visual inspection on Columns - man ways, Trays, Pall Rings,
Distributors and all welding region and recommendations are made as per
Inspection.
Carry out Hydro test on Heat Exchanger.
Carry out Pneumatic test on Heat Exchanger to check leak in tube to tube sheet
Area.
Carry out Visual inspection on vessel – all welding region, demister pad and
Recommendations are made as per inspection.
Carry out Visual inspection on Reactor along with the Stami Carbon team and
Recommendations are made.
Carry out dimensional analysis on plating and check whether all holes are in same
Dimension using Vernier caliper.
Carry out Visual inspection on Boilers – Water Wall Panels, Bruner, Super Heater
Coils, Economizer, Refractory bricks and recommendation are made as per
Inspection.
Carry out Dimensional analysis on Super Heater Coils using Vernier Caliper.
Carry out Hardness Test on Super Heater Coils.
Carry out Visual Inspection on Tanks.
Steam Drum and Mud Drum, Visually inspected.
Carry out Visual inspection on Bellows.
Carry out Pneumatic test on Bellows.
Carry out Hydro test on Fin – Fan Coolers.
Carry out Visual Inspection Tubes inside using illuminator.
Carry out Visual inspection on Columns - man ways, Trays, Pall Rings,
Distributors and all welding region and recommendations are made as per
Inspection.
Carry out Hydro test on Heat Exchanger.
Carry out Pneumatic test on Heat Exchanger to check leak in tube to tube sheet
Area.
Carry out Visual inspection on vessel – all welding region, demister pad and
Recommendations are made as per inspection.
Eversendai Engineering: Work as QUALITY ENGINEER
Dubai, U.A.E. May 2006 – June 2007.

Responsibility

Review material certification for project material to ensure it meets specification and check that it corresponds to actual material supplied.
Ensure the Sub-Contractor's, ITP are Implemented.
Perform inspection activities and witness as required by applicable Inspection Test Plan (ITP).
Generate Nonconformance report for activities and materials on site found not in conformance with specified requirements.
Monitor Contractor activities daily to ensure that they meet the requirements of the project quality plan.
Review Contractor radiographs and NDE reports to ensure acceptability to specification.
Handle Two Projects Burj Dubai, Rose Tower and Carry Out Stage Wise Inspection on Weld Visual, Dimensional Analysis, and Coordinate and Carry out NDT activities.
Calibrate Equipments and Maintain Records.
Coordinating with Third party agency, Preparation of Inspection reports, Verification of test reports and Completion of inspection booklets.
Responsible for Welding processes Viz. SMAW, SAW, GTAW, GMAW, and FCAW.
Understanding design concepts and translating them into production process that meets factory goals for cost, quality and schedule.
Carry out Structure Works (Edge Preparation, Welding Fit-up, and Machining Process).
Ensure that contractor quality records are being maintained on a regular basis.
Review of Construction QC records prepared by construction sub-contractor prior to handover to the Client.

Reliance Refinery: September 2005 - November 2005
Jam Nagar, Gujarat. Work as INSPECTION ENGINEER during
Shunt Down

Witness Hydro test of Heat-Exchanger, Fin-Fan Coolers, Pipes, Piping, and Valves.
Work in schedule Shutdown of Fluidized catalytic cracking unit (FCCU), Hydrogen Production unit, Crude distillation unit (CDU), Polypropylene unit, Aromatic plant.
Preparation of various failure investigation reports on Stress Corrosion Cracking of Stainless Steel pipes, Creep Fracture of Heater Tubes and Hydrogen Induced Cracking of Vessels.
Carry out Radiographic Interpretation as per acceptance standard ASME SEC VIII.
Witness of Two Ply test on Bellows as per Piping Solution (Pathway Division) Procedures.
Exposure to Plasma Arc Cutting Process.
Co-ordinate to Perform Eddy Current Test of Fin-Fan Cooler Tube Bundles.
Prepare Iso-Drawing of Pipelines.
Monitor Pre-heat, post-heat and Stress relieving of CS, LAS and SS piping.
Routine and shutdown inspection of Heat-Exchangers, Pressure Vessels, Columns, Heaters and Storage tanks.
Involve in Modification Work of Regenerator and Reactor.
Analyzing corrosion problems and methods of control.
Exposure to Hot Tapping on Piping.
Review of engineering drawings.
Review of all reports and recommendations prior submission to plant inspector.
Review of Reliance Industries (RIL) Limited Inspection policies and procedures.
Follow fire, safety rules and regulations in oil refinery.
Effectively communicating the technical aspects of engineering tasks to customer, technician and management.
Witness Pneumatic test of Heat-Exchangers.
Carry Out Internal Inspection of Heat-Exchangers, Pressure Vessels, Columns, and Reformer.

Cairn Energy Pty Limited: January 2006 – May 2006
Rawa Terminals, Work as INSPECTION ENGINNER
East Godavari Dt., in OFF-SHORE AND ON-SHORE.

Witness Hydro test of Heat-Exchanger, Fin-Fan Coolers.
Prepare Iso-Drawing.
Witness Ultrasonic Testing.
Carry Out Dimension Analysis in Off-shore i.e., in ALPHA PLATFORM.
Involve in Corrosion Monitoring Inspection of Pipelines in Off-Shore and On-Shore using Torsion Waves.
Carry out internal Inspection for Corrosion.

Thermal Power Station: 1st January 2006 – 25th January 2006.
Mettur, Salem. Work as QUALITY ENGINEER
(210MW) during RLA (Residual Life Assessment)
Program.

Inspect Turbine Casing i.e., (High Pressure Casing, Intermediate Casing, Low Pressure Casing), and Turbine Blades, And Diaphragm.
Carry Out Ultrasonic Testing on Turbine Casing, and Rotor Journals.
Conduct Visual and NDE Methods to Inspect Boiler Drum and Pent house.
Carry Out Hardness Test in Turbine, Boiler Drum and Ring-Header, Using Dynapocket.
Carry Out Dimensional analysis of Pipes.
Involve in Documentation Work.
Co-ordinate to Perform Replica.

Bharat Heavy Electrical's: September 2004 - September 2005
Limited, Trichy. Work as QUALITY ENGINEER in Quality
Control Department.

Inspect and Perform (Ultrasonic Testing, Radiography Testing, Magnetic Particle Testing, Liquid Penetrant Testing and Visual Inspection) on Boiler Drum, Nuclear Components, Pipes, Header's, Tubes and Castings(Valves) According to Code's and Standard's.
Perform Ultrasonic Testing on Stainless Steel Plate using Angle Beam (Longitudinal), and on Carbon Steel and Alloy Steel.
Witness Ultrasonic Testing to BRC (Baba Atomic Research Centre) and NTPC (National Thermal Power Corporation).
Perform Radiography Using Gamma Ray (Cobolt 60, Ir 192), X-Ray.
Involve in Real Time Radioscopy and High Energy Radiograph for High Thickness material using LINAC (Linear Accelerator).
Interpret and Evaluated the Film's.
Perform Magnetic Particle Testing and Liquid Penetrant Testing on Pressure Part's and Structure Part's.
Involve in Certification of New Brands (Quality and Sensitivity Test )
Perform Destructive & Non –Destructive Testing Before & After Stress – Relieving Process.
Calibrate the Equipments according to Code's and Standard's.

Rasab Engineering: May 2004 - September 2004
Works, Trichy. Work as QUALITY ENGINEER.

Responsibilities:

Inspection of raw materials and Inspection of components at the sub-contractor premises.
Carrying out various stage inspections during manufacturing.
Coordinating with Third party agency, Preparation of Inspection reports, Verification of test reports and Completion of inspection booklets.
Responsible for Welding processes Viz. SMAW, SAW, GTAW, GMAW, and FCAW.
Understanding design concepts and translating them into production process that meets factory goals for cost, quality and schedule.
Carry out Structure Works (Edge Preparation, Welding Fit-up, Machining Process).
Involve in Preparation Boiler Duct Component's.
Involve and Performed Wind Mill Tower(i.e. Visual Inspection ).

Software Skills:
M.S.Office.
Auto-Cad.
C,C++
Visual Basic.
Ansys.

Personal Profile:
Date of Birth: 07-08-1981.
Nationality: Indian.
Martial Status: Single.
Sex: Male.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 2151 to 2200 of 7054)Go to Search Parameters...
Brief Description
Electrican and Instrumentation Design and Site Construction. LV Distribution, MCC, UPS, Lightings, Field Instrumentation, SCADA, Shutdown Systems, Fire and Gas Systems, Gas Station Facility Design, Pipeline Facility, Cathodic Proteection
I have 20 years experience across the petrochemical industry, including Petrochemical refining, offshore gas compression, FPSO experience, and fixed platform oil/gas separation and export. Supervisory/Control Room/Commissioning. In many countries, Singapore, Dubai, Qatar, Brazil, U.K.
Over 20 years of various offshore vessels, ship yards, offshore rig, gas platforms, drill ship and engine factories as Oilier, Junior Engineer, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Chief Engineer, experience with expertise in following: Supervision and Tra
Experienced in Oil and gas projects.
Time served Electrical Engineer with 16th Edition qualification.
Danish marine geologist. Experienced in acquisition and interpretation of seismic data - scientific production of 6 papers on the topic. Seismic facies and texture interpretation. Experianced in Landmark interpretation tools. Fluvial, deltaric and coastal environment interpretation.
14 years experience in piping, pipeline and mechanical engineering within the oil and gas and petrochemical industries. Experience of all project phases including Estimation, Front – End Engineering, Detailed Design, Construction and Commissioning.
B.Sc. of Petroleum Engineering from Suez Canal university with general grade “Good“ in may 1992 Refining Eng. Branch.
Drilling Engineer: Challenge-driven and decisive professional offering nearly 16 years of experience as Drilling Engineer / Production & Operations Engineer on land, jackup, and off-shore platform drilling rigs. US & International.
PETROLEUM ENGINEER HAVING 16 YEARS OF VERSATILE EXPERIENCE IN PRODUCTION OPERATIONS.
To work for a company in the petroleum/oil field that allows professional and personal growth.
A position utilizing strengths in leadership and technical operations to accomplish Company objectives. Willing to travel and/or relocate.
Total 18 years of design and project management experience in offshore and onshore construction field. Working in M/S Oil & Natural Gas Corporation Limited of India (ONGC) since July, 1985. Documentation and project implementation under ISO 1994 / 2000 for past 4 years.
I have More than 16 years experience with pioneer engineering companies. My major experience is as “Document Data Controller/ Incharge Design Department, refineries and process industries. I am ready to join on short notice.
Extensive experience as an engineer with proven ability to be a part, manage, and provide support and team supervision for startup / acceptance testing, troubleshooting, calibration, and maintenance of systems. Experience in applying UL, NEC, NFPA, CSA, and FM codes and IEEE standards.
Process Engineer working with DSM(Work Exp. 5 years)
Reservoir simulation, reservoir rock and fluid characterization, production optimization, static and dynamic test analysis
High Voltage Electrical Testing and Commissioning and Electrical Start-up
I have worked as a Contracts Engineer in both Drilling and Production for more than 20 years, primarily for Shell and Esso. Recently I moved back to Canada after working overseas for 17 years. I am now looking for either ad-hoc or rotational work either in Canada or internationally.
Drilling Engineer now working with NIKO Resources Ltd as a well Site Drilling Eng. and has worked with Oilex Ltd. australian Comapny as NSD,Night drilling Supervisor Niko Resources Ltd west block India, Drilling Eng. Sun Drilling Kazakisthan, Trainee directional Driller Mitchell Drilling (Australia)
EXPERIENCED METALLURGIST & INSPECTION ENGINEER
I am a Diploma holder in Electronics discipline and one year Instrument mechanic in chemical plant, more than eleven plus years of experience in various plants & projects like Petrochemicals and Refineries. In these years, I have acquired the knowledge of Maintenance, testing and commissioning of d
Well- organized innovative and result oriented Person. Flexible attitude, highly energetic, innovative. Willingness to learn & accept new challenges. Ability to perform under crunch situations. Major strengths are good communication skill, ability to work independently and as well as a team L
To obtain a position that suits my qualifications
To be a dynamic, dedicated, respected and recognised Engineer and to contribute relevant experience to the position applied.
Material Balance, PVT analysis, Reserves Estimation, Production Enhancement, Workover, Decline Curve Analysis, Pressure Surveys, Field Surveillance and Development
Professional with experience oriented to the seismic interpretation in the exploratory and production area, synthetic seismograms, velocity conversion, Geological and attributes seismic map generation, Evaluation, plan and execution of new wells drilling. Integration geophysical data with petrophysi
Safety officer with more than four years experience in construction field and oil and gas
I am seeking employment as a Petroleum Engineer in Production, Workover & Completion engineer, where I have had some experience of off shore & on shore production workover operations. I believe that my education, experience, and training will enable me to make a significant contribution in differen
5+ Years Experience in field Engineering, Instrumentation, Automation and Control, Mastering Honeywell EXPERION and YOKOGAWA CENTUM CS3000, Outstanding Skill in HMI/MMI Design
Five (5) years of work experience as PDS Designer. Results oriented and enthusiastic professional with a solid background in piping design and lay-out. Proven record in delivering quality works and consistent in meeting deadlines. Quick learner, easily adapting to new system of works.
E&I Engineer
A Professional Engineer with over 4 years' experiences in Process Control Systems for the design, development & implementation of process control applications, Extensive knowledge in Honeywell Distributed Control Systems' (DCS) Hardware & Software: -TDC 3000/TPS& ExperionPKS systems and FSC, SM Tric
CHEMICAL PROCESS ENGINEER IN PETROCHEM/OIL/GAS INDUSTRY EXPERIENCE
A professional petroleum engineer based in Hassi Messaoud, Algeria, with over 5 years of experience in various aspects of petroleum engineering. Looking for a challenging and interesting opportunity world-wide. Fields of interest: Reservoir engineering. Production engineering. Petroleum engineering
BE with first class. Action taking, decision making, high confidence level, good team leader, good communication skills, hard working, excellent faultfing skills, logic development and control configs.
Seeking a position to utilize my skills and abilities in the Civil Engineering Field that could offer professional growth while being resourceful, innovative and flexible.
Pressure vessels, Heatexchangers and tanks designre
Project Construction and Commissioning Coordinator, Concentrating for MD Totco System Mud Logging Systems
Manager, design systems, HSE mechanical service
Bachelor Mech Engg, FEED preparation and review, preparing PMS, piping standards and specifications, developing plot plan, piping layout and isometrics review, piping MTO, MR/PR, bid evaluation, dwg approval, stress analysis using CAESAR-II, Tender inputs for construction
I graduated with a second class upper division in Chemical Engineering from LAUTECH, Nigeria and a holder of MS Petroleum Engineering from UI, Nigeria. I have beeing Working as a research assistance since 2006 with an experience in Paints industry.
outdoor field technician
Designer, Drafter
Carry our inspection activities on static equipment as per specified inspection test plan or inspection work list given by client in accordance mentioned codes and standards
Experienced Mechanical Designer. Over twelve years drafting experience with ten years of design experience designing automated and semi-automated assembly machines for the automotive powertrain industry.
Graduate Mechanical Engineer with expertise in Design of Process plant equipment like pressure vessel, columns, reactors, tanks, skids etc. having expereince more than 6 years,.
layout ,project management,model review
EDUCATION: Bachelor of Engineering in Mechanical from Govt. Engineering College, Jabalpur, India in April 1984 Diploma in Personnel Management from Indian Institute of Management Studies, New Delhi, India in 1987
15-years Professional Experience in Contract Department (QS), Planning & Scheduling, Construction & Testing, Oil & Gas Fields, Fertilizer & PTA
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   [ 44 ]   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com