Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #79638 next resume »»
CONTACT INFORMATION:
View contact information...

EXPERIENCE SUMMARY

Twenty-nine years of diversified technical and management experience including: Maintenance Security Supervisor, Instrumentation and Control Maintenance Supervisor and Project Manager.

EMPLOYMENT HISTORY

American Electric Power * DC Cook Nuclear Plant

2001 - Present: Maintenance Security Supervisor
* Supervised technicians responsible for performing Preventive and Corrective Maintenance on plant security equipment.
* Accountable for overseeing new equipment installation.
* Security Equipment includes fiber optic cameras, microwaves, metal detectors, explosive detectors, x-ray machines, electric strikes, card readers, hand reader stations, and maglocks.
* Substantially reduced the microwave zone equipment downtime from an average of 200 hours per month to approximately 7 hours or less per month.
* Collaborated with Fix-It-Now teams to troubleshoot equipment.
* Managed equipment maintenance budget.

1998 - 2001: Instrumentation and Control Maintenance Supervisor
* Supervised Instrumentation and Control Maintenance crews performing surveillances, bench and loop calibrations, valve setup, gauge calibration, Corrective Maintenance and Preventative Maintenance tasks.
* Performed administrative duties including, but not limited to training, time sheet review, staff schedules and coordination of responsibilities.

1989 - 1998: Project Manager
* Coordinated facility activities associated with the implementation of Instrumentation and Control changes, as well as Electrical Design Changes.
* Coordinated technical, regulatory, material and administrative support for design changes.
* Researched, prepared, and reviewed Design Change packages prior to issuance for implementation.
* Maintained the design change installation for schedule adherence; provided technical direction as required.
* Closed out Operation Return to Service ¡* punchlists.¡¨
* Reviewed as-built drawings for mark-up.
* Analyzed installation documention for completion.

1983 - 1989: Instrumentation and Control Technician/Design Change
* Performed loop calibrations, surveillances, valve calibrations and corrective maintenance.
* Verified design changes to ensure accurate prints and proper implementation.
* Installed design changes and tested to verify completion.

1980 - 1983: Auxillary Equipment Operator
* Operated plant equipment under the direction of the Reactor Operator.

EDUCATION
* 1978-1980 Radio and Video Technician - United Electronics Institute, Grand Rapids, Michigan
* 1978-1980 Electronics Technology - United Electronics Institute, Grand Rapids, Michigan

TRAINING

Security and Equipment Training
* 2003 Operator & Maintenance of RAP 500 Series X-ray machine - Rapiscan Security Products, National Academy for Nuclear Training, Atlanta, Georgia
* 2003 Operator & Maintenance of GE Entry Scan Explosive Detector - Massachusetts
* 2002 Scanex I Training Course - Sentex System Inc. USA, New Jersey
* 2002 Microwave Training Course - Southwest Microwave, Arizona

Management Training
* 2001 Maintenance Supervisor Professional Development Seminar - National Academy for Nuclear Training, Atlanta, Georgia
* 2000 Labor Relations Training - D.C.Cook
* 1999 Maintenance Supervisor Training Program - National Academy for Nuclear Training, D.C.Cook
* 1998 New Leader Program - D.C.Cook
* 1991 Nuclear codes and standards - General Physics Corporation
* 1991 NEC 250: Grounding Electrical Distribution systems - George Washington University
* 1990 Post Modification Testing Training - General Physics Corporation
* 1990 National Electrical Code - University of Toledo
* 1989 Project Management for Engineers - General Physics Corporation

View contact information...
«« previous resume next resume »»
Search Results (Resumes 451 to 500 of 7040)Go to Search Parameters...
Brief Description
Maintenance Supervisor/Security, Maintenance Supervisor I/C, Project Manager, I/C Technician
20 years fire fighting experience.Now working in ADNOC Off Shore facility
Having 23 years of sound experience in piping and equipment design for Onshore / Offshore Oil and Gas, Petrochemical and Chemical Industries.
24 Years of experience in Piping/ Pipeline Design Engineering for Oil & Gas of Onshore and Offshore facilities.
Structure designer is make development basic design from engineer to make engineering drawing with make details, sections, connection types and discuss with other department like piping, civil, mechanical etc to make problem solve in engineering design or site.
Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress
PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.
SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE
Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems
Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken
More than fifteen years Experience, working with consulting engineering companies in Iran and Canada, with different assignments in variety of projects including EPC, R&D, master planning and feasibility studies
I am a professional process engineer with over 15 years experience
Free! Health, Safety & Environment Manager - Crane Inspector - OHSAS 18000 Lead Auditor - Senior Trainer - HSE Master Degree
Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience
A highly competent Senior Electrical/Instrumentation Engineer who has developed supervisory capabilities; QA / QC inspection skills; installation maintenance expertise; pre-commissioning, testing and commissioning competence; safety awareness; organising and co-ordinating flair; fault-diagnosis
More than 28 years of experience in oil industry
22+ years solid background of Piping Design in the petroleum contracting industry, covering all aspects of design activities
Experienced Completing and Producing Petroleum Engineer
Quality control,Quality Assurance,Inspection,Project Engineering,Surveillance coordinator
ASNT LEVEL 3 /WELDING PAINTING LIFTING I NSPECTOR
Enquiry specs for compressors, turbines, pump, blowers etc. , technical evaluation of bids, preparation of technical recommendations, checking & approval of vendor documents., interface with other disciplines, knowledge of API standards
17 years experience in EPC environment, on oil refineries and petrochemical projects
INSTRUMENT FIELD ENGINEER
Senior Corrosion Engineer with 14 years experience at metallurgy fields especialy corrosion & corrosion control. expert at painting, insulations,cathodic protection, materials selection, corrosion inhibitors, corrosion monitoring, coatings inspection . I am serious at work.
As a well sit geologist for six years, including one year for Coal Bed Methane, familiar with StripLog, SDL_9000 geological logging software, strong organization ability
Electric Engineer with MSEE with more than 15 years of work experience in oil and energy industry, occupying positions in electric maintenance, utilities plants operation and project engineering management and construction,
I am a postgraduate in civil engineering from the prestigious Indian Institute of Science, Bangalore. My major experience is in Oil industry. I have vast experience in Contracts Management in India & abroad.
Estimation of Oil and Gas EPIC Projects
Senior Electrical Engineer currently working For SonaHess Company (association Sonatrach & Amerada Hess), El gassi Hassi Messaoud.
• 12 years of experience in geology, geophysics and reservoir engineering, drilling operations (including horizontal, ubd, rotating BOP etc)
Mechanical Engineering graduate with experience in EPC - procurement manager
Experienced in sweet and sour, oil and gas projects. Execute projects on time and on budget while working as a team player. Solutions oriented with an eye toward bottom-line results. Organized multiple projects concurrently, with successful results in a fast paced environment. Effective communicat
Instrumentation Engineer
I'm Technical Degree in Geology (Associate Degree in Geology) and I'm looking for a job as Mud Engineer Worldwide.
In addition to my graduate engineering degree and more than 15 year of experience in power generation and chemical plants. I have currenly done my MS in Total Quality management.
Senior rotating equipment with 12 years experience with sound knowledge of project engineering and project management
B. Tech. (Electrical Engg.) from Rajasthan Vidyapeth (Deemed) University, Udaipur.
KEY COMPETENCIES
A highly skilled Petroleum Engineer with over 20 years domestic and international experience in Petroleum Industry as a Petroleum Engineer, experience in reputed International Service Company
Graduate in Mechanical Engineering having 15+years in Static Equipments & Packages Design & detail engg. engaged in Design & detailed engg. of pressure vessels, Columns for Oil & gas Applications and all other types of static equipments & packages, I have a good exposure in EPCM
Lead/Senior Mechanical Engineer- Oil & Gas, Chemical, Petrochemical and Energy Industries
Free! Oil and Gas Industry onshore construction civil engineering Superintendent with 20 years experience in overseas projects.
Twenty plus year's progressive experience in heavy industrial design, development, and construction for petrochemical refineries, upstream petrochemical, waste water treatment, power generation, chemical demilitarization facilities, Microchip facilities, LPG gas transitions, and the food & beverage
I am very talented and a hard worker. I have a good eye for any type of construction.
24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:
Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.
7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .
I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.
PDS Frameworks, Autocad, Microstation
Objective. Seeking an increasingly responsible position with an opportunity for professional challenge and growth while combining my areas of experience in the field of electrical works to support and enhance corporate goals and objectives. Educational Qualification. 1.Diploma in Electrical Engineer
First   1   2   3   4   5   6   7   8   9   [ 10 ]   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com