Resume - GRADUATE MECHANICAL ENGINNER,CSWIP 3.1 WELDING INSPECTOR CERTIFIED BY TWI,UK,AS...

Misco Jobs

Resume #79806

CONTACT INFORMATION:
View contact information...

Qualifications:

Professional Qualifications:

Bachelor of Mechanical Engineering from Institution of Mechanical Engineers (India), Mumbai in 2000.

CSWIP 3.1 Welding Inspector of TWI, UK. Cswip Certificate No.33265, date of issue 19th May, 2008, Date of expiry 18th April, 2013.

IQA-IRCA-UK Certified (A 17027) ISO 9001:2000 QMS 5 days Lead Auditor Training and Examination Course by Nigel Bauer & Associates, UK in February, 2008. Course Certificate No.2008/1008.

Refresher Course on Fabrication and Erection of Steel Structures, Faculty for this course is Mr. Robert E. Shaw former Chairman the International Institute of Welding's Commission XV on Design, Analysis and Fabrication of Welded Structures.

ASNT-NDT LEVEL - II CERTIFICATION in
Ultrasonic Testing
Radiography Testing
Liquid Penetrant Testing
Magnetic Particle Testing

Academic Qualification:
Post Graduate Diploma in Environmental Education and Management from University of Hyderabad, Hyderabad in 2003
Diploma in Computer Applications

Experience:

Engineer Quality Control (Welding & NDT) in Prathusha Engineers Pvt. Ltd., at HPCL Refinery Site, Visakhapatnam, India from July 2000 to July 2005

Responsibilities:

Incoming material inspection verifying the material test certificates.
Conducting welder qualification tests, preparing welder qualification test reports and welder ID cards.
Checking the fit-up of the spools to ensure the material specification and dimensions are as per the drawing.
Witnessing calibration of welding machines.
Checking the preheat temperature before commencement of the welding and interpass temperature during runs.
Verifying the electrodes and welding voltage, amperage are as per the wps.
Witnessing dye penetrant test after root run.
Conducting weld visual inspection and clearing the job for NDT.
Witnessing NDT and make sure that the repairs are carried out as per the procedure.
Preparation of weld visual inspection reports and updating of database.
Witnessing the positive material identification of alloy materials.
Monitoring & recording welding parameters when qualifying weld procedures.
Carrying out pickling & passivation activity & inspection of the same.
Witnessing PWHT and getting approval from client.
Completing and endorsing all inspection records from initial inspection till final acceptance of the weldments.
Maintaining interface with the Client (at the shop level) to ensure that all contractual and code requirements are met as far as the inspection scope is concerned

Surveyor in Tata Projects Limited, Hyderabad, India from August 2005 to September, 2008 at their HPCL Refinery site, Visakhapatnam, India and Kota Super Thermal Power Expansion Project in Kota, Rajasthan, India.

Responsibilities:

Incoming material inspection and verification of material test certificates.
Review of WPS, PQR submitted by subcontractors before submitting to client for approval.
Review of subcontractors various procedures i.e.weld identification&traceability,PWHT,Hardness testing procedure, PMI, NDT, Control of welding consumables.
Conducting welder qualification tests and preparation of welder qualification test reports and welder id cards.
Preparation of WPS and conducting and recording the actual variables in the Procedure Qualification testing of WPS.
Coordinating the NDT and Destructive Test Labs for WPS, and Welder Performance Test Coupons testing.
Incoming welding consumable inspection and review of consumable batch test certificates. Preparation and updating of consumable records batch wise.
Ensuring the consumables are storage, baking, issue and handling are as per the laid down procedure.
Fit-up inspection, to ensure the material specification as per the drawing before welding.
Verification of consumables and welding variables are as per the wps.
Final weld visual inspection of finished welds to clear for NDT. Preparation of weld visual inspection report.
Witnessing UT, MPT, PT tests on field.
Review of Radiography films and preparation and updating of RT status to get approval from client and 3rd party client inspector.
Witnessing and guiding the contractors for the weld repairs.
Witnessing the Positive Material Identification test for the base materials and weld metal for the alloy materials.
Liase with the subcontractors' personnel on QC related matters
Review of Inspection and Test Plan, Working procedures and method statement to meet the client requirements of Sub contractors and review of shop drawings
Compilation and collation of all documents for the final release
Since October, 2008 working as a QC Welding Inspector in Saudiarabian Saipem Limited, Kingdom of Saudiarabia.
Project: Khurais Central Processing Facilities, Khurais Crude Contract, Gas Oil Separation Plant, Client: Saudiaramco
Responsibilities:
Conducting welder qualification tests, and preparation of welder qualification test certificates and i d cards.
Review of wps before submission to client for approvals.
Witnessing Procedure Qualification Tests and recording the actual variables during the test.
Witnessing the destructive tests in material test labs of material test samples, welder performance qualification and procedure qualification test coupons.
Fit up inspection before welding to ensure material grade and dimensions are as per drawing and client specification and as per wps.
Random witnessing of Root runs of Austenitic Stainless Steel Spool joint root run penetrant test.
Surveillance inspection of welding consumables for their storage, issue and handling to meet Aramco standard procedure.
Final weld visual inspection of finished welds before release for NDT.
Witnessing PWHT to ensure for its compliance with the procedure.
Witnessing Magnetic Particle Testing of cut out fittings, and Hardness testing on carbon steels.
Witnessing PMI tests on alloy steel and CU. NI materials to ensure the conformity of alloys as per client requirements.
Test Pack Documents Review
Review of Sub contractor's quality procedures, NDT technicians qualifications.
Witnessing Hydro tests as per the procedure.
Preparation of fit-up, weld visual inspection reports on daily basis.
Coordination with the client to get the QC approvals at various stages.
Good knowledge ISO Quality Management System.
Good Knowledge in welding processes, SMAW, GTAW, GMAW, SAW.
Familiar with international codes ASME SEC II, V, IX, B31.3; API 1104, 570, API RP574, AWS D1.1 and Aramco Standards.

Personal Profile:

Nationality: Indian

Marital Status: Married

Languages Known: English, Hindi, and Telugu

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 6997)

Go to Search Parameters...

Brief Description

15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.

18 years experience in process design of refinery and petrochemical units.

Over 14 Years in Maintenance planning, Shutdown/Turnaround Planning in petrochemical Industries. And also in Maintenance of various Rotating and Static Equipment ;Construction Planning including costing.

A consulting petroleum engineer / project management position in a challenging environment which requires significant technical expertise. Available for immediate travel, domestic or worldwide.

I am a Chemical Engineer having more than 18 years experience in various Oil Processing / Gas Treatment / Petrochemical Process Plants . I have 6 years of Onshore / Offshore Oil / Gas Plants Operational Experience as a Production Supervisor.

Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre

Expert in understanding permeability of the carbonate reservoirs. With this help reservoir engineers can do their well level simulation rather easily. Fees are charged for every foot of well data studied. Work will be done at the place of the expert.

More than fourteen years hands-on and supervisory experience in Petroleum Refineries in Qatar, Saudi Arabia and Pakistan. Have been analyzing samples from all streams of different units. Have been acting as Lab. Group Leader during Group Leader's leave/absence.

A well rounded drilling personnel with a unique experience in drilling and completion / work over operations

Over twenty years in plants, and pipeline construction, Inspection and supervision, including several overseas assignments.

Quantity Surveyor/Estimator (Mechanical)

All descriptions of skillsand experiences are listed in resume. I am available to begin work immediately.

Instrumentation Engineer with 15 years of experience in maintenance, teaching and construction

Primavera , MS Project

A self-motivated mechanic with over twenty years worldwide experience, in mechanical/ maintenance engineering’s high-pressure environments; from marine engines, top drive, rotary tables, auxiliaries, hydraulics, and rig upgrades. I am hard working, resourceful and reliable.

Working as Geosteering engineer, meeting with client, collect data, model preparation, landing section, lateral section, steering while drilling, report. Communication to all participant while drilling execution.

i am graduate mechanical engineer having 7 years expereince in piping/structure fabrication and erection in the kingdom of bahrain.we were making the items like tanks , pressure vessels,pot shell,pipe stack , pipe racks for oil and gas sector, petrochemicals and off shore products.

I have extensive experience on Electrical Engineering studies , construction , Transmission & Distribution and Oil & Gas during my assignment on Total E&P Yemen and Petomar in Angola. Designing, modifying, and implementing electrical system my daily challenging job.

ASNT L III UT AND WELDING INSPECTOR AWS CWI QC1.

I am a Structural Designer with over 7 years experience in design of offshore and onshore oil facililities, building and other civil infrastructures

Seven (7) years experience in designing fire protection systems for petrochemical plants and similar industries. I am familiar with NFPA and other internationally accepted standards.

7 years experience in Mechanical maintenance

- Good at English and drilling software.

16 years of Piping & Pipelines Project Management/Project Execution experience in the Industries like Refineries, Hydrocarbon, Petrochemical and Oil&Gas(Cross Country Pipelines, Booster Pump stations, Oil Station, Gas Station, Up-Stream flow Lines).

GRADUATE MECHANICAL ENGINNER,CSWIP 3.1 WELDING INSPECTOR CERTIFIED BY TWI,UK,ASNT LEVEL II IN RT,UT,PT,MPT,IRCA UK APPROVED ISO 9001:2000 QMS LEAD AUDITOR COURSE PASSED. MORE THAN 8 YEARS EXPERIENCE IN QA/QC,WELDING INSPECTION IN EPC OIL&GAS

Making electrical design by using program ETAP such as Load Flow Study, Short Circuit, Motor Starting, Relay Coordination, Transient, and also calculation manually as a proof of the software.

Iam a Graduate Mechanical Engineer with MBA in Poduction Management and a PG. diploma in Materials Management with around 8 + Years of Experience in various MNC's (Oil & Gas, Process/Chemical, Metallurgical, Pharmaceutical.etc.).

An enthusiastic and self motivated Production and Process Engineer, with experience on production optimization and surface equipment designing and evaluation, focused on maximizing asset production capacity and productivity in the oil and gas industry.

HSE Manager, Experience in HSE studies of seismic exploration 2D and 3D since 2004 to the date

Oil and gas mechanical technician

I have diploma with 20 years experience in construction/maintenance. 10 years in oil industries maintenance, also witness commissioning and start up of new installations in the refinery. Hands on experience in 33/11/3.3kv/440v systems.Available in one month time notice period.

Specializing in ICT/SCADA planning Proven Technical & Management Expertise with 14 years Experience overseas-Kuwait and Japan.

See resume

Resume for Project engineer position

Expert INSTRUMENTATION , SCADA, TELECOM , DCS OR SAP / ERP , DESIGN , ENGINEERING , PROJECT MANAGEMENT , OPERATION AND MAINTENANCE , TECHNICAL SERVICES , ISO’S ETC

Industrial engineer, ample experience in catalytic cracking technology and liquefied natural gas, seeks position to apply knowledge acquired as researcher over past four years. Having lived in Latin America and Western Europe, have developed effective multi-cultural skills.

Chemical engineer with over eight years experience in an oil refinery. Utilize exemplary leadership, time-management, critical thinking/analysis, problem resolution, written/verbal communication and human resources management skills to plan and schedule operational, production and dispatch facility

Sr. Drilling & Completion Consultant

Chemical Engineer with 15+ years experience in upstream oil/ gas exploration & production industry. Experienced in equipment sizing, hazards and effects process tools application (i.e. HAZID, HAZOP, JHA etc.), process simulations, process optimization, feasibility studies, concept identification,etc

Diploma In Instrumentation Engineering + AMIE Eqvt to B.E

I have dedicated 14 years in the corrosion protection, corrosion monitoring, material selection and material upgradation in Oil and gas based industries. For the last two years I have been associated with the Inspection Management System and Risk Based Inspection programme being developed.

Expert in alignment, maintenence, troublrshooting, overhouling with nice computer knowledge

Fourteen years of experience in Estimation & Proposal preparation of Co - Generation Boilers, Refineries & Oil, Gas and Petrochemical Plants. Well versed in all aspects of Estimation and commercial terms & conditions of contract.

Excellent working knowledge in Piping stress analysis using caesar II

Electrical Power Management and Control System, Offshore Electrical and Instrumentation Control System, LV, MV and HV power distribution, VFD, GE Multilin protection relays,DCS (Emerson DeltaV), PLC (Allen Bradley, GE Fanuc, Omron), SCADA (Citect) systems, Safety Instrumented System (HIMA), system.

Plant and DCS operator

I am interested in exploring the possibility of employment through your Organization. My background includes experience of over two years as a Trainee Mud Engineer on offshore platform in Petrobaltic S.A.

GIS Specialist

I am a Mechanical Engineer with over 20 years of oilfield experience in Drilling, Well Intervention, Cementing and downhole tools

B.E. Mechanical engineer with 6 years experience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out