Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #79942
next resume »»
CONTACT INFORMATION:
View contact information...
SUMMARY OF QUALIFICATIONS:
------------
* Extensive experience in Engineering and Construction related to Oil and Gas Industry.
* Familiar with Electrical Software (Ecodial 3.8, ETAP Power Station 4.0, EDSA, CYME, DIALux)
* Familiar with Instrument Software (Instrucalc, Flowel, Firstvue)
* Familiar with international standard (IEC, BSI, IEEE, NFPA, IES, ISA, API)
* High degree of competency in written and spoken English.
* Proficient with MS Word, Excel, Access, Powerpoint, Autocad. Typing speed 60 wpm.
* Deep knowledge in computer's hardware and networking systems.
* Excellent communicator, experienced working at client sites to facilitate project implementations, support and training.
OBJECTIVE:
------------
Position as electrical/instrument engineer in engineering and Construction Company for oil and gas consultant and contractors.
WORK EXPERIENCE:
------------
JABUNG GAS BOOSTER STATION PROJECT (PT. Transportasi Gas Indonesia)
Employer: Penspen UK - PT. Aldaberta Indonesia.
Job: Instrumentation/Control and Electrical Engineer
* Review detail engineering documents for instrumentation and control including vendor documents (Solar Gas Turbine Compressor, Rosemount instruments, ICS Triplex Trusted PLC, Elster-Instromet Meters, Deutz Diesel & Gas Engines, Atlas Copco Air Compressor).
* FAT on behalf Owner (ICS Triplex Shutdown System Singapore, MTL PLC, Elster-Instromet Ultrasonic Flow Meter Malaysia, Tyco GPO and Pneumatic Valves Singapore, TAMCO Switchgear)
* Instrument/Electrical Site installation supervision including impressed current cathodic protection installation.
GUNUNG MEGANG GAS BOOSTER STATION (PT. Mitra Energi Buana, a subsidiary of Medco Energy)
Employer: PT. Citra Panji Manunggal.
Job: Electrical and Instrumentation Engineer
* Instruments calculations (Control valve, PSV)
* Instruments datasheets (SDV, Control Valves, PSV, Cables, Transmitters)
* Electrical load list and single line design (LV systems)
* Electrical short circuit and load flow calculation (Ecodial)
* Cables sizing
* Electrical datasheets (LV MCC, UPS, Power Cables).
GRESIK GAS PLANT PROCESSING PROJECT - PHASE I (PT. Media Energi)
Employer: PT. Estu Artha Lancar.
Job: Electrical and Instrumentation engineer
* Write electrical and instrumentation design Basis Manual and specifications
* Electrical and Instrumentation Calculation (Cable Calculation, Control Valve Calculation, etc.)
* Electrical and Instruments material selection, review technical proposal from vendors (Cables, Flow Meters, Transmitters, etc.)
ETHYLENE GAS RECEIVING SYSTEM PROJECT (PT. Styrindo Mono Cilegon, Indonesia)
Employer: PT. Citra Panji Manunggal.
Job: Electrical and Instrumentation engineer
* Write electrical and instrumentation design Basis Manual and specifications.
* Electrical and Instrumentation Calculation (Load Calculation, Control Valve Calculation, Cable calculation, etc.)
* Cathodic protection calculation (sacrificial anode).
* Electrical and Instruments material selection, review technical proposal from vendors (Switchgears, Cables, Coriolis Flow Meters, Transmitters, etc.)
SOUTH SUMATRA- WEST JAVA GAS PIPELINE PROJECT PHASE II ONSHORE / STATION FACILITIES PROJECT (PT. Perusahaan Gas Negara)
Employer: Penspen UK - PT. Petrotechindo Utama.
Job: Lead Electrical Engineer (Last Position)
* Review all electrical drawings, specifications, calculation, data sheet, material take off, bill of quantity (BOQ) and schedule of price (SOP) documents from 3 PGN's selected contractors (PLI, CRW, REKIN, SIEMENS)
* Review Cathodic Protection documents.
* FAT & SAT (Tamco, Shaft Power, Caterpillar Diesel Engine, GT Cables)
* Mechanical completion check for Electrical and Instrumentation installation.
INSTALLATION OF MR/S ULTRASONICE OFFTAKE METERING, PERAWANG STATION RIAU (PT. Perusahaan Gas Negara)
Employer: PT. Yuan Sejati
Job: Electrical/Instrument Field Engineer
* Responsible to prepare technical document related to Electrical & Instrumentation.
* Responsible for the coordination for electrical installation with other discipline at site (Electrical/Civil Interface, Electrical/Instrument Interface)
* Field install and test instruments.
* Prepare inspection and function test for the electrical and instrument installation.
* Electrical and Instrumentation precommissioning.
EDUCATION & CERTIFICATION:
------------
BS Degree in Electrical Engineering with sub major in Control System Engineering from BANDUNG INSTITUTE of TECHNOLOGY in Indonesia.
ADDITIONAL INFORMATION:
------------
I'm indonesian citizen and willing to be relocated anywhere.
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 2101 to 2150 of 7045)
Go to Search Parameters...
Brief Description
+15 yrs exp,Concept,FEED,Detail Engineering,Oil/Gas,onshore,offshore,power plants,Rotating Equipment,Pumps,Compressors,Turbines,Engines,Pressure Vessels,Tanks,Heat Exchangers,Chemical Injection,Instrument Air,Fire Protection,Cranes,Equipment Selection,Specification,Data Sheets,TBE,Vendor Data Review
Refinery operation, technical service to hydrocracker/hydrogen/sulphur recovery unit, commissioning of hydrocracker/hydrogen/effluent treatment plant
16 years of Piping & Pipelines Projects execution experience in the Industries Refinery, Hydrocarbon and Oil & Gas (Project piping, pipelines, Tanks, structurals, equipments). Knowledge of ASME Sections, ANSI, API & DIN codes /Standards.
Pipeline Integrity Engineer with Metallurgical & Material Engineering background, extensive experiences in the oil/gas both Offshore and Onshore (and swamp) pipelines.
FEA ENGINEER-ANSYS,HYPERMESH,ABAQUS
Masters in Electrical Engineering. Four year experienced. Skills: MATLAB, PLC Programming, Simulation,HSPICE,MULTISIM, Assembly Language, AutoCAD, Visual Basic, C/C++, Operating Systems
Sr. Structural Engineer-Ports, Marine & Offshore 8 years experienced, with knowledge of SACS, StaadPro, SAP
Mechanical Engineer with over 16 years experience within the hydrocarbons onshore & offshore, mineral processing and manufacturing industries. Degree & trade qualified experience includes, engineering design, construction, shutdowns, commissioning and maintenance. Over 10 years of on-site constru
BE Electronics, Experience in Project erection & Commissioning of Electrical & Instrumentation, Procurement of Elec & Inst. Materials
Diploma in Electrical Engineer. AutoCAD. Word. Excel. Windows.
Sr.Mechanical Engineer having 16 yrs of Experience in Petrochemical, Oil&Gas field
Experienced Engineer with 15+ years of on job experience. Conversant with ISO ,international standards and Oil and Gas industry requirements. Can lead a team of inspectors .Has worked in Saudi Arabia, Yemen, UAE and Kazakhstan. Largest contract Value 1.3 Billion USD.
Being a petroleum engineer and having many years of experiences on middle eastern countries ( OMAN,UNITED ARAB EMIRATES, QATAR, IRAN...) could merit for any advertised jobs.
OBJECTIVE My goal is use my chemical and process engineering knowledge in a position as a Process Engineer or simulation engineer in the Refining Industry. Also I would be interested in using my knowledge in Logistics in any Industry
Five Years (1/2003 : Until now ) as HSE Engineer, Supporting Health, Safety, Environmental Protection, Fire security and Training Requirements Relating to the Full Range for Offshore and Onshore Construction and Operational Activities of Oil and Gas Industry in Petroleum Company.
Reservoir and Production Engineer
Senior Mechanical / Piping / Materials Handling / Pneumatic Design Specialist, Checker, Design Supervisor, Project Manager or Consultant
Piping Layout,Equipment Layout,Nozzle Orientation,Vendor Drawing commenting,PDS,Microstation,GAD Extraction,Isometric extraction,Piping & Rack StudyClash resolving,Smart Plant Review
MORE THAN 5 YEARS EXP AS A SAFETY OFFICER IN OIL & GAS CONSTRUCRTION PROJECTS BOTH IN ONSHORE & OFFSHORE
11 years of NDT experience in the Middle East
Instrument Design Engineer; Instrument Site Supervisor c. PMT Instrument Field Engineer
Sizing process systems, Conceptual Design on projects : carrying out engineering studies at initiation, feasibility studies & concept selection,Process simulation & datasheet preparation ,Knowledge of Design Reviews and HAZOP studies,Preparation of PFD’s and P & ID’s,(B.Tech in Chemical Engineering)
CSWIP 3.1 certificate # 25917/2 ,TWI, U.K
I have nearly 5.5 years experience in piping material engineering pertaining to petrochemical projects with renowned EPC contractors. During this time I have been responsible for various piping material related activities like piping class preparation, TBE, vendor drawing review.
qa/qc inspector (welding or piping inspector)
wireline specialist and downhole gauges engineer
Chartered electrical engineer experienced in Instruemntation filed. Trained in QMS ISO Lead auditor course.
Mech Engineer, 10 years EPC experience in packages for oil & gas; gas dehydration, stabilization, water, effluent, pumps, utility equipment
Safety Officer with more than eight years of experience and presently working in Saudi Arabia with Saudi ARAMCO projects.
Facility Engineer for oil and gas
Graduate in Electrical Engineering, with 14 year experience, of which 6 years in Refinery/Gas plant. Familiar with all maintenance & construction activities.
Very good exposure to conceptualisation, business developement, sales, erection, installation, commissioning and O&M of Lean burn Gasengines/ Diesel engines
Senior PDS Designer
Master in Chemical Engineering, 3 year experience as mud engineer
Highly competent, result oriented Drilling Engineer with three years of extensive experience in drilling optimization of horizontal, directional and extended reach wells. Demonstrated skill as a successful team leader and team player. Masters in Petroleum Engineering from University of Oklahoma.
Canadian Sr. Control Systems Engineer (process control). PLC/DCS programming. I &C Design.
Exploration Geophysicist
Mechanical Engineer - Static Equipment (Design & Detailed Engineering of Pressure Vessels, Columns, Column Internals, Heat Exchangers & Storage Tanks based on various Design Codes & Standards.)
Piping designer /supervisor , PDS designer
Instrument and Control Engineer
More than 11.10 (8.10 years in Saudi Arabia, 5 months in Qatar, 1.7 years in Abu Dhabi UAE & 1 year in India) years of extensive experience in Quality Assurance and Quality Control in Oil, Gas & Petrochemical Projects, Acetic Acid Project, Ammonia Urea Expansion Project and Power Plants involving En
B Tech Degree in Mechanical engineering with 6+ years experience as a Production Planning and Material engineer in manufacturing of Oilfield equipments, Pressure Boilers, Process plants.
Searching for a challenging job in the field of PetroChemical engineering. Expert in MS Office and other computer operations.
6 years of experience in oil reservoir management. Development & monitoring low quality multilayered reservoirs. Preparing development plan, production forecast & the budget. DST, hydraulic fracture & acidizing operations supervision. Water flooding designing, operations & surveillance.
Instrument Design engineer having 6+ yrs of experience
POST GRADUATE - MTECH MECHANICAL (FROM NIT NAGPUR-INDIA),STORAGE TANK
Electrican and Instrumentation Design and Site Construction. LV Distribution, MCC, UPS, Lightings, Field Instrumentation, SCADA, Shutdown Systems, Fire and Gas Systems, Gas Station Facility Design, Pipeline Facility, Cathodic Proteection
I have 20 years experience across the petrochemical industry, including Petrochemical refining, offshore gas compression, FPSO experience, and fixed platform oil/gas separation and export. Supervisory/Control Room/Commissioning. In many countries, Singapore, Dubai, Qatar, Brazil, U.K.
Over 20 years of various offshore vessels, ship yards, offshore rig, gas platforms, drill ship and engine factories as Oilier, Junior Engineer, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Chief Engineer, experience with expertise in following: Supervision and Tra
Experienced in Oil and gas projects.
First
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
[ 43 ]
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com