Resume - Electrical commissioning technician / completions

Misco Jobs

Resume #79955

CONTACT INFORMATION:
View contact information...

Electrical Technician

Personal Information

* Marital Status: Married (Two Children)
* Nationality: British
* Date of Birth: 19/09/76
* Driving Licence: Full, Clean

Education

* 1988-1993 Manor Comprehensive School
9 GCSE's graded C or above.
* 1993-1997 Hartlepool College of Further Education
* 1993-1997 Apprenticeship
Cameron's Brewery Company,

Qualifications

* Hartlepool College of Further Education

* BTEC National Certificate in Electrical Engineering
* City and Guilds -2391
* Electrical and Electronic Craft Studies Part 3
Utilisation of Electrical Power Pass
Electrical Control Pass
* National Vocational Qualification Level II
Electrical Engineering Manufacture (Foundation)
* National Vocational Qualification Level III

Courses Attended

* BOSIET Survival and Valid Medical Certificate
* COMPEX Hazardous areas.
* CSSOW Permit Training
* ESSOW Permit Training
* Competent Electrical Person
* General Health and Safety Regulations.
* Electrical Safety Regulations
* Programmable Logic Controllers (Allen Bradley)
* Electricity at Work Regulations 1989.
* Fospur Water Management.
* IEE Regulations/16th Edition
* First Aid Award.
* Cat A and Cat B approved person, (Conoco Philips)
* Safety Passport.
Professional Experience

Nov 08 – Present Company: Sabic
Position: Commissioning Electrical Technician
: Completions Engineer
Project: LDPE Plant, Wilton.

Duties include pre-commissioning/final commissioning of power circuits. Full walk downs, creating punch lists, function and rotation checks with DCS through to dynamic commissioning and hand over to client. Setting up of ABB, Insum MMC controls. Creating Permit to Work Certificates including risk assessments and method statements (health, safety and environmental).

Oct 08 to Nov 08 Company: CB & I.
Position: Commissioning Electrical Technician
Project: LNG Isle of Grain.
Duties included final commissioning and hand over of LV substations with all outgoing circuits including motor manager 6 (S&I), lighting and small power, tank crane, etc

Sept 08 to Oct 08 Company: Alstom UK
Position: Commissioning Electrical Technician
Project: Ferrybridge Power Station

My duties were involved with all aspects of HV/LV switchgear, transformers and motors, including primary/secondary injection tests on all switchgear/protection relays. Involved with all on - site training of maintenance / process operatives in the operation of all relevant switchgear. Also responsible for all as-built drawings and up-to-date documentation and relevant test-sheets

Nov 07 to Sept 08 Company: Amec Offshore
Position: Commissioning Electrical Technician
Project: Britsat (Britannia Satellite).

Duties include dynamic commissioning of sea/firewater lift pumps, emergency generator, lighting and small power circuits. Inspection of completed work handed over. Working on S&I switchgear including Motor Manager Series 6. Function testing of motor circuits from MCC. With all relevant test sheets and paperwork. Completing any remedial or wiring modifications to equipment. As-Built drawings.

April 07 to Nov 07 Company: Melia Engineering
Position: Commissioning Electrical Technician
Project: Alvheim FPSO (Norway)

Duties include commissioning of the Fire water system, liaising. S&I Switchboard with Motor Manager Series 5. Function testing of motor control circuits from MCC and signals to the DCS.

Oct 05 to April 07 Company: AMEC Aberdeen
Position: Commissioning Electrical Technician
Project: Nexen Buzzard Project
Hereema Hartlepool,
Dragados Cadiz Spain
Offshore Aberdeen

Duties to include Commissioning of the " Chloride UPS" Systems 220v and 110v, Diesel Package, Hazardous Drains, Navaid Systems ( Orga ). All pre-commissioning checks were completed then liaised with other disciplines for live dynamic testing prior to handover. Initial start up and shutdown of temporary generators on a daily basis. Function checks on tripping and closing. Isolations and de-isolations of switchgear with operators before and after handover.

Sept 05 to Oct 05 Company: EIWHS Thornaby Cleveland
Position: Electrical Technician
Project: Buzzard Hartlepool (Hereema)

Installation, test/ inspection of all Electrical equipment associated with the QU deck on the project. All work carried out to Hazardous area regulations and done within the CSSOW permit to work system.

2001 to 2005 Company: Cameron's Brewery
Position: Electrical Maintenance Technician.

Maintenance and installation of electrical aspects throughout. From day to day running of all plants including water treatment plants, refrigeration, boilers, high speed production lines, C.I.P, etc. I was team leader and worked on my own initiative including quick fault finding and rectifying faults to the highest standard.. Also involved in planning, installation and breakdowns always working to company standards. (Design, plan, order parts, install and commission most new installations).

1999 to 2001 Company: Numerous Agencies
Position: Electrical Technician
Project: Morecambe Bay Gas field

Working on central platform (CP1) and various satellite rigs (DP3, DP8 drilling rigs), performing numerous electrical duties. Decommissioning of well-heads and trace-heating systems ready for refurbishments, using cable abandonment kits, pressure transmitters, motorised valves, EXE junction boxes, etc.

1998 to 1999 Company: EIWHS Thornily Cleveland
Position: Installation / Test Electrician
Project: London Heathrow.

Installation, testing and inspection of electrical control equipment for new world cargo building. Such as, electronic conveyors for cargo baskets, testing cables and inspecting glands, etc.

1993 to 1998 Company: Cameron's Brewery Company.
Position: Electrical Apprenticeship
___________________________

References
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 7050)

Go to Search Parameters...

Brief Description

Piping Designer with PDS, Rebis Autoplant, Plantspace, Microstation, AutoCad and ProCad experience.

E & I Technician

i am an fabrication enginner working with saudi aramco gas oil seperation project as a approved qa qc mechanical supervisor since june 2007

Automation, Instrument and Control Engineer Manager

I have B.S in Mechanical Engineering from Bushehr University in IRAN and I have more than 8 years of experience in Oil&Gas field and Power Plant companies, especially in piping division.

B.Sc.(Engineering) Metallurgy and Materials Science.

Certified Cost Engineer. Graduate Mechanical Engineer with over Eighteen Years experience in preparing Project Cost Proposals / Tendering including Estimation / Quantity Survey, Costing and all related activities. Completed Eleven Years in Gulf (Bahrain).

Fifteen years experience in the area of Seismic Data Processing including 2D and 3D land, transition zone, marine and OBC processing. Specialized areas including demultiple applications, imaging techniques, and Amplitude versus offset.

7-year offshore structural engineer with M.S degree

power system protection engineer with avery good experiance in protective relays testing control scheme troublshooting

Instrument Supervisor

Project Planner/Scheduler (Primavera P3 & MS Project Planning Software, MS Word / Excel). Vast experience in Steel Works Business - Planning, Fabrication / Erection (Storage Tanks & Steel Structures), Gas Plant / Pipelines. Completed Structural Engineering and 4 years in BS Mech'l Engineering.

Maintenance supervisor / Reliability specialist / Project Management

Broad base of experience within the Pulp/Paper, Pharmaceutical/Chemical and Bio-Technology industries involving design, engineering, construction, and commissioning. Management of projects (automation, instrumentation and electrical/instrumentation systems), quality, personnel and resources.

Developing & producing plot plans using PDMS 11.2 (CLS), pipe modelling (PDMS-PMS), Equipment modelling (PDMS-EMS), producing Piping Study & General Arrangement Drawings(PDMS-CAST), Producing Isometrics(Isodraft) & used Review Reality station for reviewing the plant model.

Certified ( Project Controls, AACE, #1366), published Engineer (BSPE and MBA) with over 15 years of direct field experience in Operations, budget design, Inventory control, Drilling Engineering, Oil Well Fire Control, Well design and Turnkey Bid estimates.

Education: Master in Chemistry Various certifications on Drilling Technology and Oil and Gas operations. Worked as Mud Engineer with MI Overseas. BakerHughes INREQ and IDF schlumberger in middle east. Worked as lab chemist with QGPC Qater, Mud Engineer with ADC Saudi Arabia ETC

Pr. Management-Estimating man hours, developing WBS CBS, Progress measurement techniques, monitoring by Primavera, project control, invoicing. Engineering-Prep. basic Instr data sheet, detailed ENGINEERING of DCS, FGS, SDS, control logic, SAFE. Commissioning -Elect system of process platforms

I am experienced in long & short range mine planning, scheduling, budgeting, design of safety procedures & standards, production & destress blasting, mine backfill, ventilation, ground control, geomechanics modeling & design of stable openings (using the bifurcation theory in mechanics).

Senior controls and Scada Systems Analyst

Mechanical Engineer Bsc. Hons. Project Engineer. Commissioning Engineer

Directional Driller with horizontal experience in shale and lime. Also have workover and completion experience,

Piping Stress Engineer

Registered civil engineer with Master’s degrees and 5 years of work experience primarily in structural design

Experience on process design of oil and gas industry units, engineering and tender documents preparation. Well familiar with process codes and standards and design requirements

Piping Engineer

Programming/maintenance of PLC/DCS controllers and SCADA systems. Maintenance of electrical/electronic and pneumatic/hydraulic instrument equipment. Maintenance of fire/gas detection systems (turbines, oil/gas production facilities). Excellent communication and management skills.

I am experienced in Air separation Units (Oxygen plants, Nitrogen plants, Argon plants) and Carbon dioxide plants. I am a plant manager and looking after all the activities involving in mafucturing and selling

I am Diploma Engineer in electrical and post diploma holder in Instrumentataion & control having 28 years experience in petro chemical, Heavy chemical , Oil & gas industries in a diffr\erent position in project, maintenance of instrumentation.

Instrumentation Automation Engineer 9+ Yrs Exp

Seeking very challengeable, risky and more responsible jobs to acquire a technical/management position where engineering experience and managerial skills will significantly contribute to product and process development

Control room operator, commissioning, precommissioning, plant start up, normal shut down, fire and gas, process, production, turbine.

Technical and sound Instrument engineer

15 years in the oil and gas industry including WesternGeco and Halliburton – Landmark Graphics Corporation. Areas of expertise include seismic data management, seismic and well data loading and conversion.

I am a Senior Instrumentation Technologist with 15+ years experience in the Instrumentation Engineering field; and I am well versed in project execution from FEED through to commission and start-up with a strong emphasis on efficiency and safety.

IT , Hysys,English language

Duties and Responsibilities:

Senior coatings/painting inspector

I am an Instrumentation and Control Engineer with a Doctorate Degree. I am experienced in designing and developing advanced controllers

Rotating equipment Engineer

QA/QC Inspection Engineer

Over Eight (8) years of total experience in Process Engineering which includes Basic Engineering, Detailed Engineering for Oil & Gas Offshore (fixed platform) & Onshore Processing Unit, Underground Gas Storage Facilities, Hydrogen Generation Unit, Naphtha Splitter Unit and Flow Assurance Study fo

Electrical commissioning technician / completions

I have spent 12 Years working as a DC Surveyor / Piping Designer in an onshore/offshore environment. Two of the main construction projects that I have been involved in was the BP Holstein and the Chevron Tahiti Spars. I have also spent a substantial amount of time working in petrochemical refineries

Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream, midstream and downstream activities in oil and gas industry.

Control System professional with 18 years experience and PMP and Six Sigma Green belt certified

Acting as QA/QC Manager/Cordinator (Welding, Inspection & NDT), with more 15 years of experience in the Middle East and European Union in the field of Oil & Gas and power piping projects. Experienced in work with multinational engineering companies (ALSTOM. TOTAL, KAVAERNOR¡K)

Experienced Instrumentation & Control system Engineer, interest in Projects, Proposals and Commissioning

Surface and Interfecial Sciences, Condensed Matter Physics, materials Sciences, UHV Techniques, Analytical Chemistry.

I have 12 years experience in drilling oil wells(development and exploration) and operation monitering. I have a bachelors degree in mechanical engineering.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out