Resume - PROJECT ELECTRICAL ENGINEER

Misco Jobs

Resume #80049

CONTACT INFORMATION:
View contact information...

47 years old, married, 3 children

SENIOR PROJECT ELECTRICAL ENGINEER

EDUCATION
1985: Diploma of electrical engineering - Ecole Nationale Supérieure des Ingénieurs Electriciens de Grenoble (ENSIEG).

EXPERIENCE SUMMARY
21 years experience in engineering of petrochemical and industrial plants.
Manager of TECHNIP Malaysia Electrical department during 3 years.
Deputy Manager of TECHNIP France Electrical department during 5 years.
17 years experience in management of international projects with multi operating centres as lead electrical engineer and consultant/expert.
Mastering of fluent English in international projects.

DETAILED EXPERIENCE
* Since September 1992: TECHNIP - PARIS La Défense (92)

11/2007 to date - TECHNIP Malaysia (Kuala Lumpur)
Project Engineer Electrical, Instrumentation&Safety and Area Engineer Utilities and common of Koniambo in New-Caledonia (XSTRATA – Nickel metallurgical plant – 3.5MM$ EPCM contract).
- Supervision of detail engineering activities covering a 360MW power generation comprising of 2 x 132MW coal fired boiler and steam turbines + 2 x 50MW gas turbines, electrical supply to units (1300 motors), modularised metallurgical plant based upon Electrical Arc Furnaces process (2 lines, 1 x EAF 80MW per line), Utilities facilities, conveyor systems, Mine industrial area and wharf.
- Coordination of disciplines with procurement, subcontracts, construction and control of equipment cost (110M$), hours and schedule and interfaces with Client.
- Coordination of implementation of New-Caledonia regulatory requirements (based upon European directives and French norms).
- Coordination of fire protection requirements (including regulatory aspects).

07/2005 to 11/2007 - TECHNIP Malaysia (Kuala Lumpur)
JVD Lead electrical Manager of DQRE project in Vietnam (PETROVIETNAM – Refinery – 2.2MM$ EPC contract).
- Supervision at level of JV Project Directorate of detail engineering covering power generation of 4 x 27MW steam turbines, 1 x 1.6MW diesel generator, 22kV switchboard with connection onto local grid (EVN), electrical supply to units (1300 motors and 1800kms of cables) and electrical control system (15000 I/O).
- Coordination of 5 international JV operating centres (TP (2) / JGC / Toyo / TReunidas), control of equipment cost (50MEuros), hours and schedule, interfaces with Client, manufacturer bids evaluation and follow-up and settlement of site electrical installation subcontract.

03/2003 to 03/2006 - TECHNIP Malaysia (Kuala Lumpur)
Manager of TECHNIP Malaysia Electrical department.
- Management of resources (60 staff) including identification of needs for specific competences, reinforcement and development of structure (50% growth from 40 to 60 staff) and recruitment.
- Management of development of working methods and means / software's within fields such as technical (development of reference Electrical data-base – DRB, generalisation of use of TECHNIP Group software's such as SPEL, ETAP, Caneco), QA (generalisation of use of project design reviews), proposals (generalisation of TECHNIP Group costing methodology including various statistic methods).
- Management of proposals for EPC contracts in Onshore and Offshore as well as for detailed engineering contracts (man-hours projects).
- Follow-up, expertise and support to on-going projects.
- Organisation of various training as a support to staff (specialised trainings such as SPEL, ETAP, Marian, ATEX as well as Vendor seminar/presentations).

11/1997 to 02/2003
Deputy Manager of TECHNIP France (Paris) Electrical department.
- Involvement in resources management (35 staff).
- Involvement in development of working methods and means / software's within fields such as technical (Reference engineering documentation as part of overall TECHNIP Group converging methods, in-house software's for management of input data for Electrical, cable sizing for U/G routing), QA, internal structure and project follow-up.
- Involvement in think tank group and development of material management software – MARIAN and of electrical equipment management software SPEL and its customisation for TECHNIP Group.

01/2000 to 02/2003
Lead electrical engineer for end of detail engineering follow-up especially electrical control system (15000 I/O) on OGD2 project in Abu Dhabi (ADNOC – Gas treatment plant – EPC contract) comprising power generation plant of 5 x 25MW gas turbines and 1x 19MW steam turbine.

09/1998 to 06/2002
Lead electrical engineer of SINCOR project in Venezuela (TOTAL – Crude up grader plant - 850M$ EPC contract).
- Supervision of detail engineering covering 7km 115kV overhead line, 115kV GIS substation, 34.5kV GIS switchboard, 2 500kW diesel generators, electrical supply to units (500 motors and 700kms of cables) and electrical control system (15000 I/O).
- Management of a 15 people team, control of equipment cost (19.5MEuros), hours and schedule, coordination of Caracas operating centre and 4 other engineering societies, interfaces with Client, manufacturer bids evaluation and follow-up and settlement of site electrical installation subcontract.

12/1997 to 09/1998
Lead electrical engineer of SOUTHPARS project in Iran (TOTAL – Gas treatment plant).
- Supervision of basic engineering covering power generation of 3 x 25MW gas turbines and 1x 19MW steam turbine, 2 x 2MW diesel generators, electrical supply to units and electrical control system (8000 I/O).
- Management of an 8 people team, control of hours and schedule, interfaces with Client, manufacturer bids evaluation and equipment estimation (16.5MEuros).

05/1996 to 12/1997
Lead electrical engineer of YEMEN LNG project in Yemen (TOTAL – Gas liquefaction plant).
- Supervision of basic engineering covering power generation of 3 x 38MW gas turbines, 2 x 2.5MW diesel generators, 4 variable speed drive motors 10MW used as starter/helper for gas turbine driven compressors, 2x200km pipelines, electrical supply to units and electrical control system (10000 I/O).
- Management of a 9 people team, control of hours and schedule, interfaces with Client, manufacturer bids evaluation and equipment estimation (15MEuros).

12/1995 to 04/1996
Electrical consultant for QATARGAS 3 project in Qatar (TOTAL – Gas offshore complex).
- Development of basic engineering enabling connection to existing complex of 1 new process platform and 1 wellhead platform linked together through 6km pipeline and sub sea cable.
- Interfaces with Client, manufacturer bids evaluation.

03/1995 to 12/1995
Lead electrical engineer of NOCIL BDEP project in India (NOCIL-Ethylene, PE & PP plant).
- Supervision of basic engineering covering 220kV outdoor substation, power cogeneration of 2 x 38MW gas turbines, 1 x 38MW steam turbine, 2 x 3MW diesel generators, electrical supply to units and electrical control system (8000 I/O).
- Involvement in technical design of cogeneration control system.
- Management of a 6 people team, control of hours and schedule, interfaces with Client, manufacturer bids evaluation and equipment estimation (18MEuros).

06/1993 to 02/1994
Electrical engineer of TABRIZ project in Iran (NIOC – Polyethylene plant).
- Issue of detail engineering documents covering electrical supply to units including variable speed drive systems.
- Realisation of load-flow/short-circuit current & harmonic studies.
- Interfaces with Client, manufacturer bids evaluation and follow-up.

09/1992 to 03/1995
Electrical engineer then Lead electrical engineer of QATARGAS project in Qatar (TOTAL – Gas offshore & onshore complex).
- Issue of basic engineering documents covering offshore power generation of 3 x 5MW gas turbines and 2 x 545kW diesel generators, onshore 2 x 545kW diesel generators, electrical supply to units and 2 electrical control systems (4000 I/O each).
- Realisation of load-flow/short-circuit current & dynamic stability studies.
- Management of a 3 people team during detail engineering of offshore part, control of equipment cost (4.5MEuros), hours and schedule, interfaces with Client, manufacturer bids evaluation and follow-up especially electrical control system.

* From January 1988 to December 1992: USSI INGENIERIE (COGEMA Group) - BAGNEUX (92)

06/1989 to 09/1992
Lead electrical engineer of CEPr projects in France (CEPr Saclay –Testing facilities for aircraft motors).
- Supervision of detail engineering covering 220kV substation and electrical supply to units.
- Management of a 6 people team, control of equipment cost (6MEuros), hours and schedule, interfaces with Client, manufacturer bids evaluation and follow-up, electrical works subcontract follow-up.

01/1988 to 06/1989
Electrical engineer for following tasks:
- Proposals and feasibility studies.
- Development of calculation software covering starting of asynchronous motors.

PROFESSIONAL TRAINING
2000 Training in management "Management and performance".
1995 Training in management "Developing its potential within society".
1994 Training "Designing electrical protections".
1993 Training on electrical network transient calculation software's from SKM society.
1991 Training on electromagnetic compatibility - EMC.
1990 Training on fibre optic cables.
1989 Training on local area networks - LAN.

LANGUAGES
ENGLISH (1st language): fluent.
GERMAN (2nd language): school knowledge.
ARABIC (knowledge): written / spoken.

LEISURES
Sport (tennis /golf / swimming / diving).
Reading / music / movie.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 7011)

Go to Search Parameters...

Brief Description

Operations engineer for oil and gas, shallow wells: drilling and workovers, projects evaluations.

Summary21years practical working experience in engineering design including in offshore and onshore and oil project.I worked at refrigerator, trawler,tanker,scientific and container ships.My professional experience has given me an in-depth knowledge of the El.Engineering in Marine/Petroleum branch

Oil Gas and Chemicals

Pipe Stress Analysis planning and detail studies, static analysis of piping systems, including: refractory pipe, jacketed pipe, High / Medium Temperature and Cryogenic piping connected to pumps, compressors, turbines, fire heaters, storage tanks & pressure vessels; underground pipeline.

Highly Experienced Crane and Lifting Engineer

Controls Engineer

Licensed Professional Engineer, performance oriented, with 25 years of extensive broad-based experience in multidisciplinary projects in Instrumentation and Control Systems Engineering for Chemical and Oil & Gas Industries. Supervision of complex detailed Engineering, Procurement and Construction

Over 35 years of diversified experience as an instrumentation and control system /electrical power distribution engineer for petrochemical plants, refineries, synthetic rubber, carbon black plant and oil and gas fired power plants. Provided engineering expertise in the areas of project admin.

Free! I have over 35 years experience as an Instrument and Electrical Engineer in the Refining and Petrochemical Industries. I graduated in 1973 from the University of Louisville with a Master of Engineering with Specialization in Chemical Engineering degree.

Senior Cost Estimator with 20 years of progressive hands-on experience in petrochemical, oil and gas, and consulting engineering industries. Experienced in IPM Aspen Tech; Q-Estimate, Aspen Tech Kbase - ICARUS-2000, Exxon Estimating System, LULO Software - Venezuelan Commercial Cost Software, and SI

I am communicative, hard working. I easily integrate in new working and social environments as I have excellent communication skills and I am very open minded and flexible, I am responsible, ambitious and a real team player. I totally agreed and follow the HSE policy.

20 years experience with over 15 years of experience in design, engineering, and project management in the petroleum, and petrochemical industry. Successfully worked in different roles in oil industry in his 20 yrs career – engineering, project, and operation.

Professional Mechanical Engineer, Gas Pipeline Engineer, Metering Station Engineer, Project planning and Control Engineer, Project Engineer, Drilling Engineer, Project Manager

Principal Structural/Project Engineer with 16 years exp. in Oil & Gas Structures and Heavy Civils/Bridges. Worked in America, UK/Europe and Africa. Very diligent and precise but practical in appraoch. With a MSc in Engineering and PhD in Business providing excellent management and leadership skills.

Well site geologist or geologist operation

I have 20+ years of experience finding hydrocarbons in basins across the world; mainly through acquiring, processing and interpreting 2D and 3D seismic data and working together with geologists, engineers and landmen to put together economic drillable leads.

I wish to apply for the Full time post of Geologist, presently I am working as a Assistant Professor in Geology department of Poona College of Art’s, Science and Commerce, Camp, Pune ,Maharashtra affiliated to University of Pune, past 21 years at graduate level. During teaching Structu

I am 29 years experienced in HSE arena. It is Included in Oil and Gas, Petrochemical, Lamp Manufacturing and Gas Turbine Repair Shops.

Mechanical engineer with experience of the complete construction process of petrochemical plant from basic design to testing, commissioning, start up and final hand over. Having also a detailed knowledge and sound experience in the maintenance of petrochemical plants.

20 years experience in major integrated national oil company of India. Experience in production operations, process development, enhnaced oil recovery projects and research work related various operations of the company.

Instrument and Controls Engineer

Over 18 years total experience in design engineering, process systems, field engineering, project engineering. This includes design and specifications, chemical process analysis for Process Technology units, strong skilled in water treatment process. Proficient in the use of: AutoCAD, Microsoft Wind

Metallurgical Engineer, Metallurgsit

Economic and Reserve analysis, acquisitions, reservoir engineering in California heavy oil and Appalachian Basin natural gas

Process Engineer with 20 years of experience in EPC and operating companies

PROJECT ELECTRICAL ENGINEER

Structural Engineer • PROFILE • Demonstrated design experience in structural steel and concrete - Energy/Power and Oil/Gas industry. • Diverse heavy construction experience in buildings, pre-casting, bridges, highways, dams, estimation and bidding for construction projects. EDUCATION MS. Structur

Sr. Project Engineer/ Project Manager

3 years working in PAE as Main Drllg. Eng. in charge of vertical & horizontal wells (oil & gas). 9 years w/Total (Argentina) as Drllg. Sup. onshore & 2 years as Coman Senior offshore ( jack up).Several positions f/Drllg trainee to Drllg Manager in Drllg Contractors Companies.

More than 10 years of experience coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore/onshore and subsea industries.

Petroleum engineer with over 23 years of oil and gas industry experience, including over 14 years of drilling fluids engineering in Romania, Middle East (offshore and onshore), Canada offshore (Terra Nova project) and onshore (Western Canada), Alaska, India and 9 years with Romanian drilling

Experienced oil & gas geoscientist in exploration, production and business development

I am a seasoned, experienced geophysicist/geoscientist & explorationist, and am updated with the latest technology, with in-depth experience in geophysics, as well as geology. I seek a suitable position in oil & gas G & G.

Free Lancer Nace Certified Coating Inspector, SSPC Certified Protective Coating Inspector, AWS Certified Welding Inspector, ACA Certified Corrosion Technologist 24 years of exp. in Coating field. Third party experience in Petro Chemical Industry for last 12 years

HYSYS/PROII/NGL/LPG/LNG/SYN GAS - CONCEPTUAL, FEED AND DETAIL - REFINERY, NATURAL GAS, CRYOGENIC PROCESS, SOUR GAS REMOVAL, ADVANCED PROCESS CONTROL (APC), GASFICATION (BtL, CtL and GtL). DISTILLATION AND REACTOR. HYSYS/PROII/ Distillation/Separation Sequence/Pinch Analysis.

22 years experience in maintenance , compressor , generator , pump , drilling equipment , machine shop service , manufacture , inspection service , production , wire line , fishing tools , welding work , commissioning.

Condition Monitoring, Reliability Engineer

Pipeline, Piping & Mechanical Equipement design and construction support

Worked in exploration, production and academia

Pressure vessel design engineer, Proficient with: SolidWorks, Inventor, Pro/E, AutoCAD, Algor, ANSYS, COSMOS, Matlab, Compress Codeware, Intuitive ERP; Proficient with ASME Code VIII, Div. 1 & ASME Code VIII Div. 2, B31.3; kill at using the knowledge in WRC107 & WRC279

Highly skills reservoir engineer with 18 years E&P experience and a Masters in Petroleum engineering Degree. Experience includes reservoir simulation, water flood design and management, EOR techniques, Heavy oil development, reserves evaluation, well test design and analysis & reservoir management

19 years experience in the Oil Industry with both service company & operators in UK, Oman, Australia, Brunei, Saudi, and Malaysia. Experience in Field Development Geology and geocellular modeling.

Position: Senior Instrument Engineer / Qualification: Master of Science (Electronics) - Queen’s University of Belfast

Professional Engineer with 19+ years of experience in engineering and project management, including design, sizing, and specification writing of various static and rotating equipments.

A seasoned completion/well intervention/well test professional with 18 years of experience with expertise in sand control, intelli.

the position of Chemist and subsequently to put my contribution for the growth and development of the company by utilizing my best efficiency and skills and to achieve my further career advancement opportunity.

Experienced Principal/Senior Control Systems Engineer who can contribute significantly to your company.

MS in Petroleum Engineering, 20+ Years experience as Reservoir Engineer. Skilled in Reservoir simulation, Field Development Plans and Well & Reservoir Management.

Sailed for lasat 18 years on board Chemical, petroleum, OBO and Bulk carriers. Extensive experience on drydocking and repair yard. Completed conversion of a ship to FSO at Keppel Shipyard.

I have 18 years experience in Oil & Gas Industry.Experience in completion execution: Completion activity and workover operation, Well Testing (Oil / Gas), Gravel Pack, Gas Lift, Submersible Pumps, Perforating Technique, Well Stimulation (Acid / Frac), Cement Squeeze Operation.

First 1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out