Resume - Coatings & Corrosion Engineer "NACE"

Misco Jobs

Resume #80056

CONTACT INFORMATION:
View contact information...

CORROSION, COATINS & INSPECTION ENGINEER

Date of Birth: 23rd April 1970 (38yrs)

Nationality: British. Languages: English, Spain (minimal)

EDUCATION

IOSH safety Management Certification. Certified Oxford Instruments
BOSIET/OPITO Basic Offshore Safety Positive Material Inspector (PMI).
Induction & Training Inc. Certified Nace International
LAPP Combined Lifejacket and Re-breather. Coatings Inspector No 7736
City & Guilds 619 Painting Technology Certified under Lloyds of London.
Coatings & Thermal Insulation Engineering. Inspection for Corrosion / Protective

PROFILE

Currently holding a Senior Membership from "National Association of Corrosion Engineers" (NACE) and has attained high level recognition from my Peer's within the institute and therefore gaining certification of proficiency as a Certified Coating Inspector/ certified by Oxford Instruments as a PMI operator.
In addition, Wilson is an experienced Engineer/inspector with sixteen (16) years of working knowledge within the Corrosion sector with extensive knowledge and hand on experience in application and supervision methodology.
Fully conversant in the needs and requirements set out in 1SO 9001, Nace Standards, SSPC, ASTM, ISO, CINI, PIP API, ASME specification & Codes associated with corrosion related issues.
Experienced and capabilities to supervise monitor and control activities:

X-Ray & Gamma Radiographic Services/Partnerships. Ultrasonic inspection and testing.
Magnetic Particle Inspection (MPI). Liquid Penetration Inspection.
Eddy Current Inspection. Positive Material Identification [PMI™].
Visual Inspection – Boroscope/Fibroscope/CCTV. Pre and post weld Heat Treatment.
Close Area Radiographic Device (CARD). Digital radiography.
MFL Tank floor inspection Time of Flight Diffraction. Guided wave ultrasonics
Automated and semi-automated corrosion mapping. Tube inspection – IRIS / MFL
Remote field & Eddy Current.

Having good organisation skills, and being able to work under pressure to deliver a qualifying product.
Competent to a high level of investigation and report writing Inc "lesson learned"
Enthusiastic team player, who is respectful of others opinion and is always willing to develop my learning skills.

CAREER HIGHLIGHTS

2006, solely developed and successfully patented a breakthrough technological process using Digital Radiology Imaging (DRAD) for the task of accurately inspecting composite wrap systems, which enables extremely accurate & quantifiable mapping/monitoring data to which subsequently determines the current status of both the questioned substrate and that of the composite material applied for integrity.

FURTHER EDUCATIONAL CERTIFICATE & ACHIEVEMENTS

IOSH Management safety Certification. 2007. Certified (EX-MET) PMI operator 2006.
BOSIET /OPITO basic offshore safety Nace International Coatings Peer Review.
Induction & Training course No AB-0305100057299 Nace International Coatings CIP Level 2-3.
1989, Construction Industry Training Board (CITB) Nace International Coatings CIP session 1.
Trade test -98%-
1988, London Inst of City & Guilds 619 Insulation craft. Practical & Written Examination, -1987,
London Inst of City & Guilds 619 Insulation craft Distinction-. Practical & Written Examination, -Double 1986-1989, 4:1 weeks release, Cardonald College Distinction-.
City & Guilds 619 Apprenticeship training. 1986-1990, 4 years training in craft apprenticeship, Kitsons Insulation Cont, Pilkington Grp.

EMPLOYMENT HISTORY:-

AUG 2008 – PRESENT INDUSTRIAL SERVICES LTD SPECIALIST MANAGEMENT DIV.
CORROSION DEPT HEAD

Assignment: Bahrain and GCC region.

As Department head I was mainly responsible for daily direction of the dept in so far a monitoring and inspection works associated with existing contracts. Over and above I was required to market and acquire new business for the company.
Our operations consisted, of training and implementation of techniques and application and standardization program to aid in development and correct method of application of local trainees.
Corrosion inspection PMI & NDT processes and techniques and presentation of company abilities and resources through client workshops.
Perform daily monitoring of corrosion teams, review report and activities sheet, waiver application (if applicable) method statements, QA/QC procedures and ITP prior to submission to client.
Implementation of RBI process and monitoring of same, identification of Risk Based Management through Inspection activities to reduce Risk Factors. Note: (Only assigned under a business visa therefore no NOC required)

JAN 2008 – AUG 2008 ABDUL RAHMAN AL-OTAISHAN GRP.
OPERATION MANAGER

Assignment: Jubail Industrial City Saudi Arabia.

As Operation Manager, I was responsible for overseeing existing Corrosion and contracting Division to control and monitoring of NDT and corrosion activities on projects mainly SABIC and Saudi Aramco. The group have a five year contract to supply services and materials on 37 facilities throughout the Jubail & Yanbu industrial areas. My main role was ensuring that all aspect of specification and needs of the client was achieved and delivered in accordance within the required budgets and schedules previous submitted. Note: (Only assigned under a business visa therefore no NOC required)

EMPLOYMENT HISTORY (cont)

NOV 2006-JAN 2008 FOSTER WHEELER ENERGY LIMITED.
SENIOR CORROSION/COATINGS ENGINEER.

Assignment: SHARQ 3RD Expansion Project Jubail Industrial City Saudi Arabia.

Responsibilities Included but not limited to overseeing all aspects of works in so far as Insulation and protective coatings, corrosion control, CP systems, Fireproofing reviews on SHARQ 3RD Expansion Project in Jubail. Saudi Arabia.
Key roles and responsibilities:
Conduct monitoring and inspection of piping, equipment coatings inc. cathodic protection and insulation (hot & cryogenic) activities from fabrication shop and site activities.
Reviewing of structural steel fire-protection review and classification as per hazardous criteria layout data. Review and quantify prior to submission to clients. Materials & sub-contractor approvals, Technical deviation reviews concession reviews inc issuing of variation instruction. Review of method statement/ ITP/QCP and HAZCON prior to commencement of works. Day–day inspection and field monitoring of both task specific as above and general health and safety and environment requirements through programs such CORE investigation.
Note: (Only assigned under a business visa therefore no NOC required)

MARCH 2005 – OCT 2006 INSPECTION SERVICES (SCOTLAND) LTD.
OPERATION MANAGER / INSPECTOR.

Assignment: Various UK and overseas. Inc Alberta Canada.

Performing Inspection reviewing needs of operation and maintenance dept and provide workable directive for items, such as Corrosion awareness studies, PMI inspection, thermal imaging & On Stream Inspection activities.
Reviewing of sub contractor bids to establish assurances of correct interpretation of the actual scope to be undertaken. Provide a workable method statements and safety case study for the project such as Shell FPSO Bonga, Nigeria. – Base line survey of entire stainless steel due to material failures from CSCC.
Quantification of structural steel and piping survey in so far as works to do and specification violation leading towards completion packages.
LPG Storage Facilities, Lloyds of London / QATAR Petroleum/Samsung, carry out inspection on LPG tanks which had signs of condensation and coating failure, using thermal imaging camera to establish and record specific temperature per location, review coating application and report findings.

AUG 2004- MAR 2005 GLOBAL PETRO-PROJECT SERV (SAPIEM), SWITZERLAND.
LEAD ENGINEER, CORROSION DEPT.

Assignment: Shell Hazira, On & offshore handling, LNG Storage Terminal, Surat, India.

Provide Supervision and Inspection duties in strict accordance with Shell specification.
Review all Vendors & Sub-contactors method statements and procedure prior to works commencing.
Reviewing Bids and Tenders for Selection of suitable and competent suppliers.
Issuing of site approvals too all Sub-contractors personnel including applicator and crew supervisor/QC.
Monitoring daily activities during the erection and installation equipments and piping, inc field joints. This included material verification, as per IFC drawings and red lining to ensuring that the installation and erection & application, was in line with project requirements.

EMPLOYMENT HISTORY (cont)

JAN 2004 – JULY 2004 SAUDI ARAMCO / WORLEY (PARSON) ARABIA.
SENIOR INSPECTOR OFFSHORE STRUCTURES AND PIPELINES.

Assignment: ABA SAFA offshore Jackets and topside, NPCC yard, UAE.

Managing Inspection department and monitoring of all daily activities and aid in conducting inspection during the installation of Cathodic Protection systems during the construction of 16 platform Jackets and topsides, and pipeline for sub sea installation. Vendor inspection duties such as Sub Sea flow line FBE works, template & valve unit Inc seat testing/leak. Verification of design details within current specification. Top side verification of accommodation and electric module for gas leak testing in line with DNV,
Daily monitoring of pipelines fabrication process inc witnessing of FBE application, testing, Storage, handling prior to loading to barge.
Monitoring of the installation CP Anodes, painting, Insulation & fireproofing activities.

SEPT 2003 – DEC 2003 RIGBLAST ENERGY SERVICES, BAKU, AZERBAIJAN.
SNR COATINGS INSPECTOR.

Assignment: BP/AMEC/TEFKIN Offshore Project.

Carry out daily supervision and inspection of coating and insulation activities. From witnessing of climatic condition, blotter testing and blasting profiles and cleanliness level through to witnessing of coating application such as MIO, Glass flake and chartek 7 to structures.
Also during this assignment I was required to aid in the layout of the Rig blast new state of the art blasting facility, which was under construction, my involvement ranged from general layout detail to training of local staff to supervise the factory.

MARCH 2002 – SEPT 2003 LLOYDS REG INSPECTION LTD, LONDON, ENGLAND.
SNR COATING INSPECTOR/SUPERVISOR.

Assignment: Amec BKW, Saudi Aramco Berri Gas Plant, and Jubail KSA.

By far my most challenging position: - This included 10,000 tons of structural steel and 190,000m2 of pipe work pipeline, 61 pressure vessel both carbon and stainless steel. (Coated & Cryogenic insulation)Monitoring of all aspects corrosion / cathodic protection/ coatings and insulation activities from early works through to completion and commission phase punch lists. This included daily visiting to lay down yards and witnessing of pipeline and random length coatings application. Carrying out random inspecting and verification of actual application in progress and reviewed all paperwork and inspection reports Insulation: witnessing and inspecting the application of foam glass and vapour barriers material. Monitoring of Intumescent fireproofing (UL-1709) & Refractory application.

MAY 2001 – MARCH 2002 LLOYDS REG INSPECTION LTD, LONDON, ENGLAND.
CORROSION/COATING INSPECTOR. (THIRD PARTY VENDOR)

Assignment: AMEC Capital Projects/Belleli (now Trading as Bilfal) Heavy Industry Ltd Jubail, KSA.

My main role was to monitor and witness the fabrication and coating and insulation application of 61-cold insulation pressure vessel, which was being constructed on site. I was also AMEC's focal person for any technical issue relating to the design and construction of the vessel. Provide weekly progress reports and quality audits. Monitoring of installation of insulation to vessel and inspect as per project Specification.

EMPLOYMENT HISTORY (cont)

FEB 2001 – APRIL 2001 MCGREGOR ENERGY LTD, ABERDEEN, SCOTLAND.
COATINGS INSPECTOR.
Assignment: On & offshore. British Gas, Hannibal Plant, Tunisia.
Carry out inspection on Painting, insulation and refractory works during shut down and post shut down activities. Visiting offshore platforms to supervise Insulation application of flare bridge welds for radiation protection.

MARCH 1999 – JAN 2001 RIGBLAST ENERGY SERVICES LTD, ABERDEEN, SCOTLAND.
PAINTER AND THERMAL INSULATOR ENGINEER.
Assignment: BP/Shell/Total/Mobil/Enterprise Oil.
During this period of employment my duties ranged from application to charge hand and supervision of the other depending on workloads.
The main activities, was removal of insulation material, repairing of defective coating and replacement of insulation for maintenance works as per direction of platform

OCT 1998 – JAN 1999 MCGREGOR ENERGY LTD, ABERDEEN, SCOTLAND.
PAINTING AND INSULATION CHARGE HAND.
Assignment: QC Solitaire Pipe LayingBarge.
My role was to supervise the Painting activities plus completion works while the barge was laying pipe

1992 – SEPT 1998 RIGBLAST ENERGY SERVICES LTD, ABERDEEN, SCOTLAND.
THERMAL INSULATOR (TIE)
Assignment: Various North Sea Hook-ups.
During the hook up stages I was engaged in the application of thermal insulation material and sheet metal fabrication as per standard Petro-chemical specification.

1986 – 1992 KITSONS INSULATION CONT, GLASGOW, SCOTLAND.
CRAFT APPRENTICE ENGINEER
Assignment: 4 Year CITB Training.
Year 1-2 Working on various industrial and Petro-chemical facilities throughout the UK, performing craft trade school training for City & Guilds 619. Year 3, as above plus, working in main shop fabrication department. Glasgow Year 4-6 Surveying and Estimating local tenders and project supervision duties.

Referee
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 6998)

Go to Search Parameters...

Brief Description

28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.

Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years experience.

Senior Offshore Structural engineer with 13 year of post graduate experience in analysis & design of offshore structures

20+ years experience as Piping Designer in FEED, EPC, EPCM, Detail Engineering in Oil & Gas, offshore,Petrochemical,and Refinery & Chemical industry.

Departmental development and management of process, staff and workflow integration into corporate operations.

Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.

Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control

I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.

Petroleum Engineer

DSV with over 20 years experience.

I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.

Conceptual design, front end and detailed engineering of process plants including preparing piping layouts , equipment layouts ,plot plan,Preparing and checking PDS 3D/Auotplant models,Isometrics,Pipe support and stress analysis,MTO,BOM,Manpower Management,to complet project within budget and time

I have experience with rotating equipment such as turbine, compressors, motorrs, pumps and gearboxes.

12 years of experience in various design, training and project planning activities which involves Static and Dynamic Stress Analysis of different Nuclear, Petrochemical and Pharmaceutical Piping Systems, Selection and Design of Pipe Supports, Piping Layout design, Isometric Drawings, Integrated Pla

Maintenance & Mechanical Commissioning Supervisor

Having 15 years of experience as as Design Draughtsman / Autocad Engineer in Oil & Gas, Petrochemical & Manufacturing industries.

QA/QC Manager Welding Engineer Offshore and Onshore

Project/Engineering Manager, 24 yrs Experience in Oil & Gas (Indian Oil Corporation Ltd.) for Development of Terminals & Gas Stations. Projects involve conceptualizing, engineering, budgeting, estimation, tendering, procurement, fabrication, installation, testing, pre-commissioning and commissioning

Piping stress analysis, finite element analysis using ANSYS, Mechanical design, etc.

Design skills in steel and concrete of petro chem and power plants.

Production Engineer resume

Coatings & Corrosion Engineer "NACE"

I am 44years old and right now I am still working at PT Pec-Tech Indonesia (RGMI Group), current position as “Senior Process Engineer”. Business line of this company is Engineering/EPC As you can see from my enclosed curriculum vitae; I have long and wide experiences (± 19 years) in Operation Pro

Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects

Upstream and mid-stream experience(27 years) plus underground waste water injection

Experienced Materials Metallurgical Engineer seeking a position in research and development facility. Has experience with fuel cells technologies, fuel reforming materials and processes, automotive industry, hydrogen related technologies, engine mechanical design.

I am experienced in reservoir simulation and numerical modelling, foamy heavy oil flow, well testing analysis, production forecast, horizontal and multilateral wells, thermal recovery, water flooding, PVT sampling and analysis.

I have outstanding experience in the design of high-pressure gas transmission line and its associated facilities in valve stations and also a fuel gas supply line plus governor station to 1800 MW combined cycle power plant in South Korea.

Senior reservoir engineer: 30+ yrs experience in N. America, S. America, and Europe. Denver-based. Available for contract work, long-term or short-term. Fluent in English and Spanish.

Drilling Specialist for 35 years. Postings have included Worldwide Drilling Manager, In-Country Drilling manager, Drilling Engineer, On-Site Drilling Supervisor and Drilling Consultant. Skilled in foreign start-up operations and training of Nationals.

Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects.

Project Engineer with Australian education, canadian experience and with very good project management skills.

Pipeline, Facilities and Project Engineer.

More than 18 years of design experience in oil and gas production, gas processing, LNG Production, and projects of refinery, petrochemical and chemical industries. Specific experience in front end and detail engineering, process engineering/flow schemes development, process data sheet preparations

Good working experience on Instrument and control system

Senior Mechanical Piping / Stress / Equipment Engineer BS in Mechancial Engineering USA National

8yrs of working experience in the field of HVAC & Duct Manufacturing. M.S. from KFUPM. B.E. (Mechanical). Areas of Interest Heating, Ventilation and Air-Conditioning. Indoor Air Quality. Facilities Management (Inventory, Space, Maintenance,

QA/QC Enginner

Reliability, Maintenance, Planning and Material Engineer- Mechanical

More than 15+ years experience in process operation

Telecom field technicians Customer end

Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis.

Electrical Maintenance in Petrochemical Industry

Extensive and diversified experience in the field of Onshore & Offshore Oil &Gas, Petrochemical, Refinery, Chemical Plants for FEED, BASIC Design & Detail Engineering for various types of Static Equipments viz. Pressure Vessels, Columns (CS & CLAD), Towers, Reactors, Heat exchangers, steel structure

Mechanical senior technician,• Carry out maintenance work independently in the repair, overhaul, troubleshooting, alignment of rotating equipment like (pumps, compressors, fans …), spares requirement…

I am a chemical engineer having 17 years of work experience in India and Bahrain at various management levels in process engineering and operations, troubleshooting of of Fluidized catalytic cracking, gas compression, concentration units, and hydro processing units, gas treatment & sulphur recovery

Managemen and Multidiscipline Engineerign Coordination of Oil & Gas Industry |FEED and Detail Engineering Projects.

Integrated Geoscientist & Reservoir Geophysicist-Geoscientist/3D Modeler

unigraphics designer drafter

I am a Senior DCS/Instrument engineer with 19 years of experience in Project engineering, Construction, Commissioning and Maintenance support of Oil/Gas & Petro chemical industries.

First 1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out