Resume - QA/QC Inspection Engineer

Misco Jobs

Resume #80232

CONTACT INFORMATION:
View contact information...

EDUCATIONAL QUALIFICATIONS:
DIPLOMA IN MECHANICAL ENGINEERING – From Directorate of Technical Education in the year 1997 – First Class with Honors (83.0% of marks aggregate).

TECHNICAL QUALIFICATIONS:
CSWIP 3.2 SENIOR WELDING INSPECTOR – TWI, UK / Certificate No. 24241
CSWIP 3.1 WELDING INSPECTOR - TWI, UK / Certificate No. 23307
BGAS GRADE - 2 PAINTING INSPECTOR – TWI, UK / Certificate No. 26004
ASNT LEVEL III – In Radiography Testing (RT) / Certificate No. 181938
ASNT LEVEL III – In magnetic particle Testing (MPT) / Certificate No. 181938
ASNT Level II – In Ultrasonic Testing (UT) / Cert. by R. Baskar Certificate No. 149505
ASNT Level II – In Radiography Testing (RT) / Cert. by R. Baskar Certificate No. 149505
ASNT Level II – In magnetic particle Testing (MPT) / Cert. By R.Baskar Certificate. No.149505
ASNT Level II – In Penetrant Testing (LPT) Cert. By R.Baskar Certificate No. 149505
ASNT Level II – In Eddy current Testing (ET) / Cert. by Bansi Rele Certificate No. 31888
LEAD AUDITOR CERTIFICATION
IRCA approved lead auditor for ISO 9000: 2000
Certificate no. LAC/1201, valid upto 06.10.2011

OTHER INFORMATION:
1. BARC Level II in Radiation Protection and Safety trained and certified by Bhaba Atomic Research Centre, Mumbai, India.

2. Diploma in quality engineering certified by Bharathidhasan University, Trichy for Calibration and Quality Control techniques.

3. Trained by GPIC, Bahrain for Thermal Imaging Techniques for ceramic-coated lining, thermal insulated tanks and vessels.

4. Trained by Larsen & Toubro Ltd (Heavy Engineering Division). Practical application of Time of Flight Diffraction techniques on Pressure vessels.

5. Trained by Advanced Institute, Italy on practical application of SAFT on Post Hydro static tested Heavy pressure vessels

SAFETY COURSES FOR ONSHORE:
1. Trained by Bahrain Petroleum Company about SAFETY INDUCTION on Working with Confined Spaces.
2. Trained by BAPCO for AUTHORIZED PERMIT RECEIVER Program.
3. Trained by SAUDI ARAMCO for Safe driving practices and defensive driving on the Project facilities area.

SAFETY COURSES FOR OFFSHORE:
CONDUCTED BY EMIRATES TECHNICAL AND SAFETY DEVELOPMENT CENTRE, ABUDHABI
1. Offshore Survival Training
2. Basic First Aid Training
3. Basic Fire Fighting
4. H2S Awareness And Apparatus Wearer
5. Helicopter Underwater Escape Training (H.U.E.T)
6. Personal Safety And Social Responsibility
OFFSORE SAFETY COURSES CONDUCTED BY SMTC GLOBAL, MALAYSIA
1. OPITO approved BOSET for tropical environment
KNOWLEDGE IN INTERNATIONAL CODES & STANDARDS:
ASME Sec- V, VIII Div I & II, IX, ANSI B31.3, B31.1, B31.4, AWS D1.1 and API – 1104
COMPUTER SKILLS:
OPERATING SYSTEMS: MICROSOFT XP, DOS AND UNIX
SOFTWARE'S: AUTOCAD 2007, MS-OFFICE 2007
ADDITIONAL: BROWSING OF INTERNET AND E-MAIL
TOTAL EXPERIENCE: 11.8 YEARS (Both Onshore and Off-Shore)
EXPERIENCE SUMMARY (Start from the Recent):
June 2008 to December 2008: PTAS – ITS SDN. BHD, Brunei Darussalam
Designation: Senior QC Inspector (Welding and Coating)
Client: Brunei shell petroleum, Brunei Darussalam
Project: AMPA 09, Champion 07, Iron duke and mekpie-2 (campaign 2008)
Job Description: Fabrication, maintenance and Installation of offshore facilities
Responsibilities handled:
1. Installation, Replacement and monitoring of pressure relief valves and ESD valves. This includes hot bolting also.
2. Inspection on welding, fabrication, dimension check of spools which is being made in onboard.
3. Interpretation of radiographic films as per ASME B 31.3, AWS D1.1, API 1104.
4. Inspection and testing of paint, blasting application on repair and new installation piping and structures.
5. Inspection and monitoring of offshore structural repairs especially lamellar teared beam structures.
6. Inspection of new collar bracket, frames, tubular structure during renovation and expansion of facility.
7. Inspection and monitoring of duplex SS on the deck fabrication and installation.
8. Monitoring pickling and passivation on fabricated spools.
9. Witnessing of ultrasonic testing and magnetic particle inspection during maintenance.

December 2007 to May 2008: OCEANEERING L.L.C
Designation: QC Inspector (Welding and Coating)
Client: MAERSK OIL, QATAR
Project: Block-5, Al-Shaheen Field, Qatar
Job Description: Fabrication & Installation sub sea riser and Tie-in spools
Responsibilities handled:
1. Prior check before fabrication of spools, riser with various diameters and coordinating NDT activities.
2. Inspection on welding, fabrication, dimension check of spools which is being made in onboard.
3. Interpretation of radiographic films as per MITS-80 & API 1104.
4. Monitoring of holiday detection on wrapped field joint, and Field joint coat repairing glass flake epoxy.
5. Inspection of Coating, wrapping and splash zone coating (Interzone).

OCTOBER 2007: OCEANEERING L.L.C
Designation: QC Inspector (Coating)
Client: QATAR GAS II, QATAR
Project: QATAR GAS, RASLAFFAN NORTH FIELD, QATAR
Job Description: Laying Sub sea pipe line for Between Wellheads
Responsibilities handled:
1. Inspection of received submarine pipe line material with high density concrete coating
2. Inspection Prior to blasting, inspection for salt contamination tests carried out.
3. Inspection performed at various stages from gird blasting, induction heating, FBE coating and adhesive bond test.
4. Inspections of HDPF foam filling and regular density tests.

JULY 2007 to SEPTEMBER 2007: OCEANEERING L.L.C
Designation: QC Inspector (Welding and Coating)
Client: MAERSK OIL, QATAR
Project: 6030 - BLOCK 5 EXPANSIONS, AL SHAHEEN FIELD, QATAR
Job Description: Laying various diameter Sub sea pipe line between offshore installation
Responsibilities handled:
1. Inspection of material receiving for submarine pipe line material with concrete coating.
2. Inspection performed at various stages form fit up, automatic welding monitoring, and visual inspection.
3. Monitoring of Holiday detection on the wrapped field joint.
4. Inspections of cold wrapping followed by marine mastic fill (dope).

December 2006 to JULY 2007: PETRORabigh Petrochemicals L.L.C
Designation: Project Inspector (Welding, NDT, Insulation and Painting)
Client: PETRORabigh (Sumitomo chemicals, Japan & Saudi Aramco JV)
Project: PC-2 Monomer Project, Rabigh, Kingdom of Saudi Arabia.

Responsibilities handled:
1. Review of radiographed films as per ASME Sec 31.3 and ASME Sec IX.
2. Qualifying of welders and welding operators according to the ASME Sec IX and AWS D1.1.
3. Initial Qualifying and certifying for critical coating personnel according to the ARAMCO project specification.
4. Surveillance and monitoring on the various stages of substrate preparation during and after blasting and painting according to requirements of the ARAMCO Protective Coating System (APCS).
5. Implementation of Special welding process like STT (surface tension transfer – LINCOLN) on the project fabrication facility.
6. Trouble shooting on fire proofing of galvanized steel structurals.
7. Trouble shooting and monitoring of ZINC rich epoxy primers and phenolic resin based primers for Immersion services for High pressure piping and Tanks (piping services for catalyst, caustic soda, chilled water line, High pressure steam, Mono Ethylene Glycol (MEG), Propylene Oxide (P.O)).
8. Regular monitoring of abrasive material sampling inspection and surface contamination testing.
9. RTRP and FRP piping handled, from the preparation, assembling, bonding, curing and hydrostatic testing.
10. Inspection of insulation on tanks, pressure vessels and piping(experienced on hot, cold, acoustic and personal protection insulations)
11. Inspection firestop installation on power cables on road crossing and PIB installation areas (control room and substation).

Dec 2005 to July 2006: JGC Middle East FZE, Bahrain
Designation: Welding & Painting Inspector
Client: Dolphin Energy, Raslaffan, Qatar
Project: Dolphin – Upstream and Compression Facilities Project, Qatar.

Responsibilities handled:
1. Qualification of welders and welding operators for GMAW, FCAW as per the ASME Sec IX.
2. Monitoring of painting and blasting activity on the prefabricated spooling system (piping and structures, including stainless steel piping).
3. Monitoring of Stainless cleaning by pickling and passivation on rusted pipes and fittings.
4. Witnessing of Hydro static testing on fabricates spools.
5. Interpretation Radiographic films as per ASME B31.3: 2004
6. Witnessing of Reinforcement pad pneumatic leak testing on the fabricated spools.
7. Inspection of galvanized surfaces before, and after galvanizing prior to painting (used for firewater line).
8. Surveillance activity on the welder's performance and welding operator performance during production welding.

Oct 2004 to Nov 2005: PIH Services ME Ltd, Bahrain Branch
Designation: Piping / Welding Inspector
Client: Various clients in Bahrain
Project: Various projects
Responsibilities handled:
1. Performing of Thermal imaging techniques on insulated furnace walls, ceramic coated roofs and thermal insulated tanks (FLIR system was used).
2. Inspection of heat exchanger user for desalination plant for tube leak test by bubbler technique.
3. Provided assistance to the acoustic emission testing to the hydrogen service vessels, and ammonium storage tanks used for the fertilizer production (urea) (physical acoustics UK ltd, London).
4. Inspection during water jet cleaning on inside the pressure vessels and steam generators at the time of shutdown (GPIC Turnaround 2005).
5. Inspection of urea loading bucket conveyor for fatigue cracking during operation.
6. Corrosion surveying of pressure vessels during operation.
7. Interpretation of radiographic films as per ASME sec IX, Sec VIII Div I&II, B31.3, B31.1 and API 1104.
8. Inspection of over head cranes by using Tandem reel ultrasonic techniques

Aug 2004 to Sept 2004: PIH Services ME Ltd, Equatorial Guinea
Designation: QC Inspector (RT film Interpretation)
Client: Marathon Oil (UK) Ltd, Equatorial Guinea
Project: ALBA Onshore Facilities Project, Malabo

Responsibilities handled:
1. Radiographic film interpretation of RT films as per ASME B31.1 and Sec IX
2. Cross checking of Ultrasonic tested weldments for root lack of fusion.
3. Defect mapping and plotting as per client requirements.

27 Jan 2004 to 30 July 2004: Cooper Heat Middle East, Dubai, UAE
Designation: Senior NDE Inspector
Client: TOTAL FINA ELF, France
Project: DOROOD Onshore Facilities Project, Kharg Island, IRAN

Responsibilities handled:
1. Visual inspection carried out as per TOTAL FINA EIF, IRAN for water injection, chemical injection pipelines.
2. Ultrasonic testing on offshore structures and wellhead collars as per AWS D1.1.
3. Inspection on pressure vessels for exempted defects for confirmation.
4. Inspection of heavy walled piping for sea water services by ultrasonic testing.
5. Special techniques such as B-Scan imaging on the existing on shore facilities.

10 Feb 2003 to 08 Jan 2004: Larsen & Toubro Ltd, (Heavy Engineering Div) Hazira Works, Surat
Designation: NDE Engineer (E2)
Client: Various Clients
Project: Various Projects as mentioned below
Responsibilities handled:
1. Performed Time of Flight Diffraction Technique (TOFD) on PWHT treated pressure vessel after hydro static testing (Ethylene oxide reactor for BASF, Germany, & Technicas, Spain).
2. Certified radiological officer for controlling and operation of radiography for heavy walled vessel by 12MeV linear accelerator (made- Mitsubishi electric company, Japan, Output -1200R/Min).
3. Certified Site-In charge for allocation of jobs for Contractors and conducting safety surveillance audits for radiation protection.
4. Performed under clad cracking (UCC) on the steam generators used for the nuclear power plant by special technique probes.
5. Performed High temperature ultrasonic testing for the special type of material fabrication processes.
6. Eddy current testing on nuclear control rods of cadmium sandwiched with stainless steel sheet.
7. Qualified Ultrasonic operator as per ASME Sec VIII Div I for austenitic stainless steel, certified by Lloyds, United Kingdom for EU Based Pressure vessel works.
8. Co-ordinate with the NDT personnel & interpretation of radiographs as per client specification.

27 Jun 1997 to 31 Jun 2002: Super Quality Services, Trichy, India
Designation: Site-In charge
Client: Various Clients
Project: Various Projects in India
Responsibilities handled:
1. Maintaining of shooting sketch records for typical castings.
2. Radiographic interpretation of castings as per ASME B16.34 and reference with ASTM E446, E286, & E180.
3. Trouble shooting of pattern design based on the radiographic result with customer.
4. Conducting ultrasonic testing on plates, butt welded pipes, nozzles and castings.
5. Conducting Radiographic testing by IR-192 and CO-60 Sources.
6. Conducting of MPI, PT on the machined, semi finished casting with both dry and wet methods for monitoring of process related discontinuities.
7. Maintenance of records for radiation protection aspects and operation related records as per strictly BARC Requirements.
8. Maintenance of Records for ISO auditing will be regularly

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 7055)

Go to Search Parameters...

Brief Description

Piping Designer with PDS, Rebis Autoplant, Plantspace, Microstation, AutoCad and ProCad experience.

E & I Technician

i am an fabrication enginner working with saudi aramco gas oil seperation project as a approved qa qc mechanical supervisor since june 2007

Automation, Instrument and Control Engineer Manager

I have B.S in Mechanical Engineering from Bushehr University in IRAN and I have more than 8 years of experience in Oil&Gas field and Power Plant companies, especially in piping division.

B.Sc.(Engineering) Metallurgy and Materials Science.

Certified Cost Engineer. Graduate Mechanical Engineer with over Eighteen Years experience in preparing Project Cost Proposals / Tendering including Estimation / Quantity Survey, Costing and all related activities. Completed Eleven Years in Gulf (Bahrain).

Fifteen years experience in the area of Seismic Data Processing including 2D and 3D land, transition zone, marine and OBC processing. Specialized areas including demultiple applications, imaging techniques, and Amplitude versus offset.

7-year offshore structural engineer with M.S degree

power system protection engineer with avery good experiance in protective relays testing control scheme troublshooting

Instrument Supervisor

Project Planner/Scheduler (Primavera P3 & MS Project Planning Software, MS Word / Excel). Vast experience in Steel Works Business - Planning, Fabrication / Erection (Storage Tanks & Steel Structures), Gas Plant / Pipelines. Completed Structural Engineering and 4 years in BS Mech'l Engineering.

Maintenance supervisor / Reliability specialist / Project Management

Broad base of experience within the Pulp/Paper, Pharmaceutical/Chemical and Bio-Technology industries involving design, engineering, construction, and commissioning. Management of projects (automation, instrumentation and electrical/instrumentation systems), quality, personnel and resources.

Developing & producing plot plans using PDMS 11.2 (CLS), pipe modelling (PDMS-PMS), Equipment modelling (PDMS-EMS), producing Piping Study & General Arrangement Drawings(PDMS-CAST), Producing Isometrics(Isodraft) & used Review Reality station for reviewing the plant model.

Certified ( Project Controls, AACE, #1366), published Engineer (BSPE and MBA) with over 15 years of direct field experience in Operations, budget design, Inventory control, Drilling Engineering, Oil Well Fire Control, Well design and Turnkey Bid estimates.

Education: Master in Chemistry Various certifications on Drilling Technology and Oil and Gas operations. Worked as Mud Engineer with MI Overseas. BakerHughes INREQ and IDF schlumberger in middle east. Worked as lab chemist with QGPC Qater, Mud Engineer with ADC Saudi Arabia ETC

Pr. Management-Estimating man hours, developing WBS CBS, Progress measurement techniques, monitoring by Primavera, project control, invoicing. Engineering-Prep. basic Instr data sheet, detailed ENGINEERING of DCS, FGS, SDS, control logic, SAFE. Commissioning -Elect system of process platforms

I am experienced in long & short range mine planning, scheduling, budgeting, design of safety procedures & standards, production & destress blasting, mine backfill, ventilation, ground control, geomechanics modeling & design of stable openings (using the bifurcation theory in mechanics).

Senior controls and Scada Systems Analyst

Mechanical Engineer Bsc. Hons. Project Engineer. Commissioning Engineer

Directional Driller with horizontal experience in shale and lime. Also have workover and completion experience,

Piping Stress Engineer

Registered civil engineer with Master’s degrees and 5 years of work experience primarily in structural design

Experience on process design of oil and gas industry units, engineering and tender documents preparation. Well familiar with process codes and standards and design requirements

Piping Engineer

Programming/maintenance of PLC/DCS controllers and SCADA systems. Maintenance of electrical/electronic and pneumatic/hydraulic instrument equipment. Maintenance of fire/gas detection systems (turbines, oil/gas production facilities). Excellent communication and management skills.

I am experienced in Air separation Units (Oxygen plants, Nitrogen plants, Argon plants) and Carbon dioxide plants. I am a plant manager and looking after all the activities involving in mafucturing and selling

I am Diploma Engineer in electrical and post diploma holder in Instrumentataion & control having 28 years experience in petro chemical, Heavy chemical , Oil & gas industries in a diffr\erent position in project, maintenance of instrumentation.

Instrumentation Automation Engineer 9+ Yrs Exp

Seeking very challengeable, risky and more responsible jobs to acquire a technical/management position where engineering experience and managerial skills will significantly contribute to product and process development

Control room operator, commissioning, precommissioning, plant start up, normal shut down, fire and gas, process, production, turbine.

Technical and sound Instrument engineer

15 years in the oil and gas industry including WesternGeco and Halliburton – Landmark Graphics Corporation. Areas of expertise include seismic data management, seismic and well data loading and conversion.

I am a Senior Instrumentation Technologist with 15+ years experience in the Instrumentation Engineering field; and I am well versed in project execution from FEED through to commission and start-up with a strong emphasis on efficiency and safety.

IT , Hysys,English language

Duties and Responsibilities:

Senior coatings/painting inspector

I am an Instrumentation and Control Engineer with a Doctorate Degree. I am experienced in designing and developing advanced controllers

Rotating equipment Engineer

QA/QC Inspection Engineer

Over Eight (8) years of total experience in Process Engineering which includes Basic Engineering, Detailed Engineering for Oil & Gas Offshore (fixed platform) & Onshore Processing Unit, Underground Gas Storage Facilities, Hydrogen Generation Unit, Naphtha Splitter Unit and Flow Assurance Study fo

Electrical commissioning technician / completions

I have spent 12 Years working as a DC Surveyor / Piping Designer in an onshore/offshore environment. Two of the main construction projects that I have been involved in was the BP Holstein and the Chevron Tahiti Spars. I have also spent a substantial amount of time working in petrochemical refineries

Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream, midstream and downstream activities in oil and gas industry.

Control System professional with 18 years experience and PMP and Six Sigma Green belt certified

Acting as QA/QC Manager/Cordinator (Welding, Inspection & NDT), with more 15 years of experience in the Middle East and European Union in the field of Oil & Gas and power piping projects. Experienced in work with multinational engineering companies (ALSTOM. TOTAL, KAVAERNOR¡K)

Experienced Instrumentation & Control system Engineer, interest in Projects, Proposals and Commissioning

Surface and Interfecial Sciences, Condensed Matter Physics, materials Sciences, UHV Techniques, Analytical Chemistry.

I have 12 years experience in drilling oil wells(development and exploration) and operation monitering. I have a bachelors degree in mechanical engineering.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out