Resume - Duties and Responsibilities:

Misco Jobs

Resume #80452

CONTACT INFORMATION:
View contact information...

Qualifications:
BS Mechanical Engineer
International NEBOSH Certification
Certified HSE in RoK (Atyrau) with Blue Book
SIPC E&P YEMEN Certified HSE&S Supervisor
Agip KCO/Saipem Certified HSE Coordinator
Qatar Petroleum/CCIC Certified HSE Officer
Saudi Aramco/Saipem Certified Safety Officer
Agip KCO/Saipem Authorized Gas Tester
Saudi Aramco & Agip KCO Certified Work Permit Issuer/Receiver
Outstanding Safety Officer Awarded by Saudi Aramco
Certified First Aider and Basic Life Support trained
Certified Fire Fighter and Watchmen

PROFESSIONAL EXPERIENCE

Company: SIPC E&P YEMEN (Sinopec International Petroleum Exploration and Production Corp.)
Address: Villa 10 Off street # 21,
Shalamesh Area, Haddah Sana'a
Republic of Yemen
Project Involved: Marib-Shabwa Block 1 & 69 Drilling Operation
Client: SIPC E&P YEMEN (Sinopec International Petroleum Exploration and Production Corp.)
Position: Drilling HSE&S Supervisor
Date: August 18, 2007 up to January 26, 2009
Duties and Responsibilities:

Working injury free and supporting our HSE vision of no harm to people, Leadership, Accountability and Teamwork
Supervise and instruct the HSE management of the entire drilling operation. Under the principle of "SAFETY FIRST, PREVENTION PREVAILING".
Ensure that all performance meet relevant HSE requirements, Successful and timely completion of drilling operation.
Check and Review the Contractor's HSE Management System, Corporate HSE Procedures, HSE Line Organization, HSE Plan, Risks Assessment Report, Contingency Plans, Accident Reporting Procedures, HSE statistics, equipment and personnel.
Interface with the Main Design and Engineering Contractors and sub-contractor, associated with the project to review risk analysis input data and risk assessments. Ensuring the design data is provided in timely manner. Ensuring effective communication/liaison is maintained between the HSE Group and safety engineers on related safety matters.
Fully aware of the relevant industrial standards (IADC), drilling Contract, manufacturing specifications of relevant equipments and instruments, SIPC HSE Manual, Company Supervisory Guidelines, Crew HSE Plan, be familiar with the characteristic of geology and environment in the project area, and the operational methods of all drilling program.
Providing RA support and coordinating RA activities in the identification, analysis and assessment of HSE risks. Assist the RA Team with the update and development of consequence modeling and risk assessment.
Advise on HSE critical factors arising from new contracts before work starts using the HSE plan as a management tool, on project management on the determination of sound working methods and risk management, upon HSE procedures, risk assessments and the dissemination to the workforce.
Carry out Weekly & Monthly Audit and submit the Audit Report to COMPANY HSE Manager in time. The audit items include but not limited to management, leadership & commitment; safety; occupational health; HSE policies & procedures; environmental protection; risk management; crisis management; accidents & investigations; HSE training & competency; HSE assessment and improvements; operations and maintenance; HSE communications; safety meetings; HSE in design and construction; sub-contractor safety.
Take charge of the security issues with Military Officer in crew, and ensure security instruction/procedures shall immediately/strictly be carried out by drilling crew. Regularly contact with Military Officer and update the security situation of drilling.
Prepare a Daily and Monthly HSE report for the project for the attention of the Project Manager and Corporate HSE Department
Keep and maintain all training records, all accidents & hazards reports, audit reports, action points and medical cases, and prepare HSE statistics and reports.

Company: Saipem S.p.A Eni Group of Companies (Kazakhstan)
Address: 060000 Atyrau, Sarypov St.
26 A, Block 1, 1st Floor
Republic of Kazakhstan
Project Involved: Kashagan Drilling Operation
North-East Caspian Sea,
Republic of Kazakhstan
Client: Agip KCO (Kazakhstan North Caspian Operating Company)
Position: Operation HSE Coordinator
Date: September 1, 2006 up to August 16, 2007

Company: Saipem S.p.A Eni Group of Companies (Kazakhstan)
Address: 060000 Atyrau, Sarypov St.
26 A, Block 1, 1st Floor
Republic of Kazakhstan
Project Involved: Kashagan Drilling Project (Construction Phase)
North-East Caspian Sea
Republic of Kazakhstan
Client: Agip KCO (Kazakhstan North Caspian Operating Company)
Position: HSE Coordinator
Date: July 14, 2005 to August 31, 2006

Duties and Responsibilities:

Working injury free and supporting our HSE vision of no harm to people, Leadership, Accountability and Teamwork
Responsible for Operation Process HSE advice and support to the HSE plans and activities, including preparation of documents as required. Support the identification and execution of studies to identify (HAZID, HAZOP) or mitigate HSE risks.
Assist in developing and compilation of project procedures, instructions and contracting during the execution of the development project in a timely manner and that all process safety and loss prevention matters are given adequate attention. Oversee, liaise and supervise contractor in the performance of the work to ensure the project is designed and executed safely, within budget, timely and meeting the technical requirements. Assist Operations in the start-up of the facilities and during the early phase of operating the facilities.
Maintaining HSE Management System implementation, ISO maintenance, policy, standards, procedure review, development, work methods, work permit system and fire prevention programs.
Providing Technical training, planning and coordination of Emergency Response exercises and participate as a key member of Emergency Response Groups.
Conduct Health, Safety and Environment audits and inspections to identify system deficiencies and operational hazards and risk.
Understand project and client requirement for Safety engineering discipline. Understand the contractual scope of work and raise variation requests for any work not covered as part of the work scope but is required to be undertaken for job completion.
Develop and improve the Safety equipment layout and plan, F&G layout, Escape routes, F&G matrix.
Carry out formal incident investigation and follow-up corrective action till close out.
Liaise closely with company's personnel (both offshore and onshore), clients and contractors to provide advice and support in managing Health, Safety and Environment issues.
Development and implementation of proactive strategies and system to improve and / or enhance the Health, Safety and Environment issues.
Participate in progress review meetings within the company and with the client.
Ensure compliance with the prescribed Company, Clients and other Standards and local Regulations

Company: Consolidated Contractors International Company
Address: P.O. Box 22056, Doha City
State of QATAR
Project Involved: Ras Laffan to Mesaieed Sweet Gas 140 kms. New Pipeline Project
Client: QATAR PETROLEUM
Position: HSE Officer
Date: June 4, 2004 up to June 4, 2005

Duties and Responsibilities:

Working injury free and supporting our HSE vision of no harm to people, Leadership, Accountability and Teamwork
Assist to prepare Project HSE Plan, facilitate implementation of Project HSE plans, procedures specific to the project.
Coordinate the development of project rules and procedures; participate to the project HSE training plan.
Provide HSE advice, support and training (employee involved in emergency response).
Conduct safety orientation to all project employees (including new/transferred employees) and ensure to receive appropriate orientation and training on the general and particular site risks.
Monitor and review the operational conditions of the emergency facilities.
Provide HSE information and guidance to the site supervision on proper HSE procedures, current and potential hazards, employees training requirements.
Investigate all accident and incident wit the supervisor and issued final report.
Maintain a continuous contact with the client and company representatives on site for HSE issues and concerns.
Monitor HSE performance, identify and implement corrective actions and/or performance improvement
Assist to review the Subcontractors HSE plans when such plans must comply with the Project HSE plan.
Conduct and perform regular HSE meetings, audits and inspections, including audits of subcontractor facilities and equipment.
Prepare a monthly HSE report for the project for the attention of the Project Manager and Corporate HSE Department

Company: Saudi Arabian Saipem Ltd.
Address: P.O. Box 31770, Al-Khobar 31952
Kingdom of Saudi Arabia
Project Involved: East-West to Rabigh Crude Oil-1 146 kms. New Pipeline Project
Client: SAUDI ARAMCO
Position: Safety Officer
Date: April 01, 2003 up to December 01, 2003

Company: Saudi Arabian Saipem Ltd.
Address: P.O. Box 31770, Al-Khobar 31952
Kingdom of Saudi Arabia
Project Involved: Sales Gas to Yanbu through AY-1 Conversion 1200 kms. Pipeline Project
Client: SAUDI ARAMCO
Position: Safety Officer (Reliever for Area 1 & 2 Safety Coordinator)
Date: July 21, 2002 up to March 31, 2003

Company: First Gas Power Corporation
1000 MW CCPS Power Plant Project
Address: Sta. Rita, Batangas City
Republic of the Philippines
Project Involved: First Gas Power Plant Construction
Client: First Gas Power
Position: Safety Engineer
Date: April 28, 2000 up to May 06, 2002

Duties and Responsibilities:
Working injury free and supporting our HSE vision of no harm to people, Leadership, Accountability and Teamwork
Implementation of Saudi Aramco Safety and health programs, work methods, work permits system, and fire prevention programs. In compliance with Saudi Aramco Construction Safety Manual, General Instructions, Engineering Standards and Sanitary Code.
Review of Safety and corporate loss prevention programs; risk analysis and safety assessment procedures.
Providing Technical training, planning and coordination of Emergency Response exercises and participate as a key member of Emergency Response Groups.
Conduct and providing HAZID, HAZOP, JSA's and other risks assessment to ensure that the risks are appropriately managed and that the project team is fully appraised of the safety risks involved in all phases of the project and actions are appropriately taken to minimize these risks to as low as reasonably possible. Constantly review the safety performance of the company and ensure that feedback and actions are being taken to improve their performance.
Carry out site accident investigation, fire prevention, hazard identification, and report to management.
Monitoring pipeline construction activities and commissioning works if safety standards and requirements are meet.
Keep all records and information on injuries, accident, incident, damages and production loss. Determine the cause of accident and near misses incident and recommendation by means of preventing recurrence. Provision and implementation the use of personal protective equipment (P.P.E.) on all levels.
Conduct safety orientation, toolbox meeting, fire training, and safe driving practices on all level.
Conduct periodical inspection and assessment of lifting equipment, rigging and heavy equipment status and condition. Prepare the lift plan for every heavy lift activities.
Attend job progress meeting where safety is an item on the agenda and report on job safety performance.

Project Name/Description:
Marib-Shabwah Block 1 & 69 Drilling Operation: (Client: SIPC E&P YEMEN) Operational start up to drill one land Rig 909 at well name Abelat -1. It is a fixed land rig including all equipments for operation in the same area.
Block 1 & 69 lies in the middle of Marib-Shabwah basin which is prolific with oil and gas and holds an area of 1324 km2 with sandy and relatively flat surface in southeast. The block, with small elevation difference in the south and there are more sand dune in northwest of block 69.
Kashagan Field is an oil field located in Kazakhstan. The field is situated in the northern part of the Caspian Sea close to the Kazakhstan city of Atyrau. The field was discovered in 2000. The field is operated by Eni under the North Caspian Sea Production Sharing Agreement. The Agreement is made up of 7 companies consisting of Eni (18.52%), Shell (18.52%), Total (18.52%), ExxonMobil (18.52%), ConocoPhillips (9.26%), KazMunayGas (8.33%), Inpex (8.33%). The original group included BG Group instead of KazMunayGas; however BG sold its stake to the partners in 2004. Eni operates this project under the JV company name of AgipKCO (Agip Kazakhstan North Caspian Operating Company N.V.)
One of the larger discoveries of this decade, it is estimated that the Kashagan Field contains up to 18 billion barrels of recoverable reserves of oil. The field faces a number of challenges: it is offshore in a particularly harsh environment, and it is located in a potentially volatile geopolitical climate.
Kashagan Drilling Operation: (Client: Agip KCO)Ongoing Operation to drill of 27 wells (firm) and 7 wells (optional) to be drilled from an artificial island drilling centre (D-Island) by two rigs (Rig 401 & Rig 402) simultaneously. The rigs have possibly to skid on different slots in single row; the system is innovative: there are not a rails like a normal skidding system but four (for DES) and ten (for DSM) jacking cylinders that lift DES and DSM of the ground and as many skidding cylinders that skid the rigs 20" per time.
Kashagan Drilling Project (Construction Phase): (Client: Agip KCO)Construction and installation of two drilling rigs (Rig 401 and 402 both rig has typical designs of drilling support modules, drilling equipment system with mast structures) and Common system including piping's, Fire & Gas, boilers, MCC units, Generators, tanks of diesel, barite, OBM, base oil, waste water, cementing tanks and mud mixing tank.
Ras Laffan to Mesaieed Sweet Gas 36" New Pipeline Project: (Client: Qatar Petroleum) Construction of Sweet Gas 36" New high pressure pipeline, cathodic protection and fiber optic cable installation (from Ras Laffan to Mesaieed Qatar Petroleum Plant) at approximately 140 kms. including swamp (Off shore) and land (Onshore) area pipeline construction. Achieve 2 million man hours without Lost Time Injuries (LTI).
East-West to Rabigh Crude Oil-1 36" New Pipeline Project: (Client: Saudi Aramco) Construction of new 36" high pressure pipeline, cathodic protection and fiber optic cable installation (from East-West to Rabigh Plant) at approximately 146 km. including swamp (Off shore) and land (Onshore) area pipeline construction. Achieve 2 million man hours without Lost Time Injuries (LTI).
Sales Gas to Yanbu through AY-1 Pipeline Conversion Project (Client: Saudi Aramco): Modification and conversion of existing 48" AY-1 Crude Oil Pipeline for Sales Gas Use, starting from E/W PS-1, along E/W pipeline corridor to Yanbu Crude Oil Terminal. Achieve 2 million man hours without Lost Time Injuries (LTI).
First Gas Power Plant Construction Project (Client: First Gas Power): The largest New Power Plant Construction in Philippines, Constructing tank farms, barge/truck loading facilities, main electric sub-stations, pump station and pipeline 56", 48", 36", 20", 14" in diameter. Achieve 2 million man hours without Lost Time Injuries (LTI).

EXCELLENCE SAFETY AWARD ACHIEVEMENTS

Certificate of Appreciation for Outstanding Safety Officer
East-West to Rabigh Crude Oil-1 New Pipeline Project
Awarded by: T.J. Phelan, Saudi Aramco Safety Coordinator
O.A. Al-Junaid, Saudi Aramco Sr. Project Manager
Cross Country Pipeline Projects Division.
Date: August 2003
Entitled of Certificate of Appreciation
Awarded to Saudi Arabian Saipem Ltd. in recognition of the completion of five million man-hours with no lost time injuries on BI-3168 Sales Gas to Yanbu through AY-1 Conversion
Awarded by: O.A. Al-Junaid, Saudi Aramco Sr. Project Manager
Cross Country Pipeline Projects Division.
Date: February 2003
Entitled of Certificate of Appreciation
Awarded to Saudi Arabian Saipem Ltd. in recognition of the completion of six million man-hours with no lost time injuries on BI-3168 Sales Gas to Yanbu through AY-1 Conversion
Awarded by: O.A. Al-Junaid, Saudi Aramco Sr. Project Manager
Cross Country Pipeline Projects Division.
Date: May 2003

EDUCATIONAL ATTAINMENT

College: Golden Gate Colleges
Batangas City, Philippines
March 2000
Course: Bachelor of Science in Mechanical Engineering

Secondary: Talahib Pandayan National High School
Batangas City
1992 – 1996
Elementary: Talahib Pandayan Elementary School
Batangas City
1986 – 1992

TRAINING & SEMINARS

International NEBOSH Certification
-Dubai UAE
Permit to Work System Training level 1 to 6 (Issuer and Receiver)
-Agip KCO, Kashagan Drilling Project D-Island, Republic of Kazakhstan
-Saudi Aramco, KSA
-Qatar Petroleum, State of Qatar
Training and Examination for Engineer Certification on Safe Operation of Load Lifting Equipment, Pressure Vessels, Steam & Hot Water Boilers and Safety in Oil and Gas Industry
Republic of Kazakhstan
Emergency Response Training (Fire, H2S, Oil Spillage Offshore and Onshore, Man-over board, Search and rescue at height and confined spaced)
-Agip KCO, Kashagan Drilling Project D-Island, Republic of Kazakhstan
SAFE PROGRAM and SAFE-R system Training of Agip KCO in Construction and Drilling Operation
Basic Offshore Survival and Escape Training (BOSET including Fire Fighting, First Aid & Helicopter Underwater Escape Training HUET)
Yeskertkist Kyzmet Kazakhstan (YKK) Training Center, Republic of Kazakhstan
Basic Life Support and Advanced First Aid Training Course
- Yeskertkist Kyzmet Kazakhstan (YKK) Training Center, Republic of Kazakhstan
-Hamad Hospital, Doha, State of Qatar
-Philippine National Red Cross
Hydrogen Sulfide (H2S) and Self-Contain Breathing Apparatus (SCBA) Program
- Yeskertkist Kyzmet Kazakhstan (YKK) Training Center, Republic of Kazakhstan
-Unisafe Fire Protection Specialist
S.A. Saipem Ltd. KSA
Seminar on Labour Law of Kazakhstan
Atyrau City, Republic of Kazakhstan
Safety Practices and Occupational Safety for Pipelines, Plants and Drillings of Oil/Gas Wells
Saudi Aramco, KSA.
Hydro-testing for Power Plant
Career Development Training Center (CDTC),
Batangas City, Philippines.
Seminar on Role of Mechanical Engineering to Society
Philippines Society of Mechanical Engineer (PSME) officials
Batangas City, Philippines.
On the Job Training
First Gas Power Corporation
1000 MW CCPS Power Plant Project
Batangas City, Philippines.

CHARACTER REFERENCES
It will be printed upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 6980)

Go to Search Parameters...

Brief Description

Certified ( Project Controls, AACE, #1366), published Engineer (BSPE and MBA) with over 15 years of direct field experience in Operations, budget design, Inventory control, Drilling Engineering, Oil Well Fire Control, Well design and Turnkey Bid estimates.

Education: Master in Chemistry Various certifications on Drilling Technology and Oil and Gas operations. Worked as Mud Engineer with MI Overseas. BakerHughes INREQ and IDF schlumberger in middle east. Worked as lab chemist with QGPC Qater, Mud Engineer with ADC Saudi Arabia ETC

Pr. Management-Estimating man hours, developing WBS CBS, Progress measurement techniques, monitoring by Primavera, project control, invoicing. Engineering-Prep. basic Instr data sheet, detailed ENGINEERING of DCS, FGS, SDS, control logic, SAFE. Commissioning -Elect system of process platforms

I am experienced in long & short range mine planning, scheduling, budgeting, design of safety procedures & standards, production & destress blasting, mine backfill, ventilation, ground control, geomechanics modeling & design of stable openings (using the bifurcation theory in mechanics).

Senior controls and Scada Systems Analyst

Mechanical Engineer Bsc. Hons. Project Engineer. Commissioning Engineer

Directional Driller with horizontal experience in shale and lime. Also have workover and completion experience,

Piping Stress Engineer

Registered civil engineer with Master’s degrees and 5 years of work experience primarily in structural design

Experience on process design of oil and gas industry units, engineering and tender documents preparation. Well familiar with process codes and standards and design requirements

Piping Engineer

Programming/maintenance of PLC/DCS controllers and SCADA systems. Maintenance of electrical/electronic and pneumatic/hydraulic instrument equipment. Maintenance of fire/gas detection systems (turbines, oil/gas production facilities). Excellent communication and management skills.

I am experienced in Air separation Units (Oxygen plants, Nitrogen plants, Argon plants) and Carbon dioxide plants. I am a plant manager and looking after all the activities involving in mafucturing and selling

I am Diploma Engineer in electrical and post diploma holder in Instrumentataion & control having 28 years experience in petro chemical, Heavy chemical , Oil & gas industries in a diffr\erent position in project, maintenance of instrumentation.

Instrumentation Automation Engineer 9+ Yrs Exp

Seeking very challengeable, risky and more responsible jobs to acquire a technical/management position where engineering experience and managerial skills will significantly contribute to product and process development

Control room operator, commissioning, precommissioning, plant start up, normal shut down, fire and gas, process, production, turbine.

Technical and sound Instrument engineer

15 years in the oil and gas industry including WesternGeco and Halliburton – Landmark Graphics Corporation. Areas of expertise include seismic data management, seismic and well data loading and conversion.

I am a Senior Instrumentation Technologist with 15+ years experience in the Instrumentation Engineering field; and I am well versed in project execution from FEED through to commission and start-up with a strong emphasis on efficiency and safety.

IT , Hysys,English language

Duties and Responsibilities:

Senior coatings/painting inspector

I am an Instrumentation and Control Engineer with a Doctorate Degree. I am experienced in designing and developing advanced controllers

Rotating equipment Engineer

QA/QC Inspection Engineer

Over Eight (8) years of total experience in Process Engineering which includes Basic Engineering, Detailed Engineering for Oil & Gas Offshore (fixed platform) & Onshore Processing Unit, Underground Gas Storage Facilities, Hydrogen Generation Unit, Naphtha Splitter Unit and Flow Assurance Study fo

Electrical commissioning technician / completions

I have spent 12 Years working as a DC Surveyor / Piping Designer in an onshore/offshore environment. Two of the main construction projects that I have been involved in was the BP Holstein and the Chevron Tahiti Spars. I have also spent a substantial amount of time working in petrochemical refineries

Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream, midstream and downstream activities in oil and gas industry.

Control System professional with 18 years experience and PMP and Six Sigma Green belt certified

Acting as QA/QC Manager/Cordinator (Welding, Inspection & NDT), with more 15 years of experience in the Middle East and European Union in the field of Oil & Gas and power piping projects. Experienced in work with multinational engineering companies (ALSTOM. TOTAL, KAVAERNOR¡K)

Experienced Instrumentation & Control system Engineer, interest in Projects, Proposals and Commissioning

Surface and Interfecial Sciences, Condensed Matter Physics, materials Sciences, UHV Techniques, Analytical Chemistry.

I have 12 years experience in drilling oil wells(development and exploration) and operation monitering. I have a bachelors degree in mechanical engineering.

Drilling/Energy Professional, functional/technical business experience on IT, project management, operations, sales, supplier summit, strategic development. Oracle Certified Professional (OCP) DBA and EIT Texas. Strengths - drilling, workover, Petroleum engineering, IT implementation, Oracle

Become an expert in the field of Computer & Information Technology and hold a high position with broad decision-making authority

Project Procurement Manager

reservoir engineer

Environmental, Health and Safety Specialist and Industrial Hygienist experienced and Certified by the Board of Certified Safety Professioals

Experienced, highly knowledgeable and enterprising engineer with wide ranging expertise in mechanical engineering, project management, and maintenance management.

Master Degree (5 years) in Geology. 5 experience years in oil rigs, 2 as mud engineer

Coordinate Engineering and design activities on the Project across all involved disciplines for the assigned Project. Ensure effective cross-discipline coordination and resolve cross discipline problems. Preparation of project schedules

Maintenance of process control instrumentation systems and start-up and shutdown activities associated with LNG, Petrochemical, Fertilizer, and Refinery in India and Qatar.

PDS & PDMS – Piping, Equipment , Structure & Support Modeling (MDS)

Mud Engineer with 8 years of experiences.

Mechanical Engineer With 5 Years Exp.

3 Years Mechanical Engineering Course with First Class passed in 1987 from India.

Multiskilled instrument & control tech, experienced in oil & gas. Excellent computer skills with hands on experience in maximo system.

Piping Draftsman

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out