Resume - Instrumentation and Control - FEED, Detail Design, Construction, Pre-Commissioni...

Misco Jobs

Resume #80453

CONTACT INFORMATION:
View contact information...

EDUCATION AND PROFESSIONAL QUALIFICATION

1996 – 1998 University of Teesside, United Kingdom
B.Eng (Hons) Instrumentation and Control Engineering

1992 – 1995 German – Malaysian Institute, Kuala Lumpur
Diploma in Industrial Electronic majoring in Instrumentation and Control

EMPLOYMENT HISTORY

July 2008 – Present Worley Parsons,
Perth, Western Australia
Senior Instrument Engineer

Involving in FEED and Detail engineering for all the Field Instruments such as preparing Data Sheets for all Field Instruments, checking Inter-Discipline drawing, Reviewing P & ID, Bid Evaluation and Vendor document review.

May 2006 – June 2008 Shell Petroleum Development Company of Nigeria Limited (SPDC)
Nigeria
Senior Instrument Engineer

Part of FEED team is SPDC. Involving in AG Solution project and as a Discipline Lead Engineer for Gas plant project (Brownfield project). Preparing Instrumentation, Control and Automation philosophy such as Process Automation System (PAS), Fieldbus Planning Philosophy, Control Room Philosophy, HMI & Graphic Philosophy, Safety Instrumented Systems (SIS), other field instrument specification, Fire & Gas Systems philosophy & specifications and Fiscal & Allocation Gas Metering Philosophy. Participating in HAZOP, SIL study and FIREPRAN.

February 2000 – April 2006 Technip Geoproduction (M) Sdn. Bhd.,
Kuala Lumpur
Instrument Engineer

Project: Turkmenistan Field Development
Client: Petronas (Turkmenistan) Sdn Bhd..
March 2005 – April 2006

Project Administrator for INTOOLS. Preparing specification and involving technical bid evaluation for Wellhead Control Panel, Actuated Valves, Control Valves, Pressure Relief Valves, Sand Monitoring, Water Cut meter, Flow Element, Pressure Instruments, Temperature Instruments and Level Instruments.

Project: BR-E CO2 Removal Platforms
Client: Talisman Malaysia.
June 2004 – February 2005

Project Administrator for INTOOLS. As a detail design which involving in engineering for the Field Instruments such as preparing Data Sheets (Control Valves, Pressure Relief Valves, Orifice plates, Field Electronic Transmitter and Level Transmitter), Control Valves sizing, Pressure Relief Valves sizing and Orifice Plates sizing, Instrument Schedule and I/O List. Preparation Level Sketches and reviewing Hook-Up Drawing, Skid Vendor Wiring diagram, and Skid vendor hook-up drawings. Assisting Distribution Control Systems (DCS) Engineer and FGS Engineer for preparation of Cause and Effect. Supervising Graduate Engineer.

Project: VCM – PVC Project, Cangzhou, China
Client: Cangzhou Chemical Industry Co. Ltd.
November 2003 – May 2004

As a Basic design which involving in engineering for all the Field Instruments such as preparing Data Sheets for all Field Instruments, checking Inter-Discipline drawing, Reviewing P & ID. Responsible for Flow measurement, Field Transmitter, Pressure & Temperature Gauges vendor technical clarification and Level Sketches.

Project: Intermediate THF/PTHF, Shanghai, China
Client: BASF
September 2002 – October 2003

Involving in Detail engineering for all the Field Instruments such as preparing Data Sheets for all Field Instruments, checking Inter-Discipline drawing, Reviewing P & ID. Responsible for Flow measurement, Field Transmitter, Pressure & Temperature Gauges vendor technical clarification.

Project: Cakerawala Gas Field Development, Gulf of Thailand
Client: Carigali Triton Operating Company (CTOC)
Based in: Technip Kuala Lumpur Office and Offshore, Gulf of Thailand
April 2002 – September 2002

Offshore Hook-up and Commissioning activities. As a member of Hook-up and Commissioning team, involved in Hook-up coordination such Material coordination, dealing Offshore Technical Query, loop check, commissioning, document handover.

Project: Cakerawala Gas Field Development, Gulf of Thailand
Client: Carigali Triton Operating Company (CTOC)
Based in: Penang Shipbuilding and Construction Sdn. Bhd. (PSC), Penang
February 2001 – April 2002

PSC the Fabricator of Riser platform which consists of Main Frame Support (MSF), Module 1 ( Sales Gas Compressor 1) and Module 2 (Sales Gas Compressor 2). As a Lead Field Instrument Engineer task taken care were responding to all technical queries on Field Instrument including Gas Metering package, HVAC package, Deluge skid, Fire & Gas system, Telecom system, and Pre-Commissioning for all system. Duties included; reviewing Fabricator shop drawing, as built drawing, pre-commissioning documents, and vendor coordination.

Project: Cakerawala Gas Field Development, Gulf of Thailand
Client: Carigali Triton Operating Company (CTOC)
Based in: Technip Kuala Lumpur Office
February 2000 – February 2001

CTOC consists of 5 new platforms; 3 Drilling platforms, 1 Riser Platform and 1 Production Platform. Involved in Detail Engineering such as preparing Data Sheets (INTOOLS format) for all Field Instruments, checking Inter-Discipline drawing, Technical Bid Evaluation, and review Vendor Drawing in all 5 platforms.

August 1999 – January 2000 KENTZ MEPC (M) SDN BHD,
(Contract Basis) Gebeng Site
Instrument Engineer

Project: Centralised Utilites Facilities (CUF)
Petronas Gas
Base in: Gebeng, Kuantan

KENTZ is the E + I subcontractor to Foster Wheeler for Centralised Utilites Facilities (CUF) project. Among the tasks under this position involves installation of instrumentation work in the CUF Plant Gebeng.. Responsible for checking in house calibration, field calibration, loop check, pre-commissioning, checking impulses line, installation of instruments, and verified the drawing such as P&ID, instrument location, loop drawing. Duties also included checking the installation of instruments, impulse line, junction boxes, cable routing and location of instruments.

February 1999 – August 1999 Foxboro Malaysia Sdn. Bhd.
(Contract Basis) Project Engineer

Project: Re-Instrumentation of Module 1, 2, 3 and Common Facilities
Malaysia LNG, Bintulu
Based in: Foxboro Kuala Lumpur Office and MLNG Plant, Bintulu.

This position involve in commissioning Distribution Control Systems (DCS) in the field, Factory Acceptance Test and Site Acceptance Test at MLNG Plant, Bintulu. Duties included installation of Distribution Control Systems (DCS) panels, loop check within field to PLC and DCS, trouble shooting (hardware and software). Learned the Foxboro DCS I/A series system.

August 1998 – February 1999 YTL Power Station Sdn. Bhd.
Pasir Gudang
Control & Instrument Engineer

Responsible for maintenance routine including calibration and trouble shooting on all aspects of modern power station instrumentation and control systems. Other duties included PLC programming modification (SIEMENS S5) and handling DCS (TELEPERM XP) including responsible for handling UNIX operating system and VAX/VMS operating system, Plant Management System and SCADA systems. Responsible for software modification such as plant and process software.

July 1995 – September 1996 YTL Power Station Sdn. Bhd.
Pasir Gudang
Control & Instrument Technician

Responsible for maintenance routine including calibration and trouble shooting on all aspects of modern power station instrumentation and control systems. Other duties included PLC programming (SIEMENS S5)

1993 – 1994 BASF Malaysia, Pasir Gudang
Control and Instrument Trainee

This position part of Industrial Training while studying for Diploma. Gained wide experience working with process instrumentation. Duties included calibrating modern transducers for process measurements (flow, temperature, level, pH, pressure, etc.), tuning PI and PID controllers (SIEMENS CONTROLLER) and performing routine checks and maintenance on pneumatic control valves (FISHER valve).

COURSES

1. Essential of Project Management – 2 days – August 2005

TRAINING

1. Basic Offshore Safety Induction & Orientation Training ( BOSIET Training)
(Expiry on July 2005)
* HUET
* Sea Survival
* Basic Life Support
* Fire Fighting
2. Reliability Centred Maintenance (RCM)
3. OPEN VMS Skills for Users
4. OPEN VMS System & Network Node Management 1
5. SCO UNIX Openserver Release 5 Skills for Users
6. SCO UNIX Openserver Release 5 Administration Part 1
7. PLC Simulator (Siemens S5 PLC)
8. Reliability Centered Maintenance (RCM)
9. First Aids Training

QUALITIES

* Adaptable, Communicative, Flexible, Innovative, Reliable
* Self-started, Self-motivated, self-management
* Problem solving, planning and organising
* Work under pressure

SKILLS

* Knowledge in Foundation Fieldbus and Safety Instrumented System
* Skilled in computer packages INTOOLS, MS WINDOW, MS WORD, MS EXCEL, MS POWERPOINT, MS ACCESS, MATLAB.
* Knowledgeable using the Internet and Email.
* PLC programming (Siemens S5)
* Speak and write English, Malay, and Tamil.
* Clean current driving license.
* Have knowledge in various International Standards such BS, NEC, IEC,DEP, PTS,Talisman, BASF etc.

INTERESTS

* Very keen on sports.
* Play golf
* Traveling
* Reading newspaper and Technical magazine

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 7054)

Go to Search Parameters...

Brief Description

I am Vasu Jajala working in Shell Nig.Ltd. As a Construction Instrument Supervisor. I have 16 years plus of practical experience in the field of Process/Machine Control Instrument of Offshore & Onshore, Petrochemical, Petroleum refinery, Oil/Gas and QATAR LNG industries.

A proactive and analytical Mechanical Engineer with over 12 years experience of Working in a Multinational and Multi cultural work environment in fabrication operations, welding processes, project management, quality / process enhancement ,maintenance with highly regarded organizations.

Over 15 years of relevant experience in Mechanical Engineering and management. Over 5 years of technical authorship in Oil & Gas Industry. Extensive knowledge of machinery, equipment and heavy duty vehicles, maintenance and repair strong practical skills and managerial abilities.

sedimentologist with 16 years of experience in siliclastic and carbonate rock:core descripton, petropgraphic analysisand diagenesis interpretation

Professional Geologist with over 16 years worldwide experience working for major operating companies in asset management/development teams, exploration and production. Worked on a wide variety of clastic and carbonate reservoirs. Key competences are listed below.

Sr. Piping Designer - CadWorx/AutoPlant

An ambitious and highly skilled Petroleum engineer with extensive experience in reservoir engineering, well testing, reservoir fluid analysis, ISO certification, production, management, product development and launch, and customer support.

Contracts specialist with Engineering background having more than two decades experience in both Operating and Contracting companies.

Piping Design Engineer with 15 years of international experiences in the EPCM environment. Performed at a various level in the engineering design to construction site for oil sands projects, refineries, petrochemical, pump station & pipeline, and onshore facilities.

Senior Reservoir Engineer with 15+ years of broad based international experience gained in reservoir simulation, field appraisal, field development planning, reservoir surveillance, reservoir management, wellsite operations and working in integrated multi-disciplinary study teams.

Graduate, Electrical Engineering Degree Holder, Working In Indian Petrocehmicals Corporation, India Since Last 19 Years - As A Senior Technician (Supervisory Post)

Senior process engineer upstream oil and gas design consultancy. Ammonia plant operation manager. Process engineer for chemical petrochemical plants

Reservoir Engineer

PDMS Instrumentation Designer

Well experienced in the field of Mechanical maintenace of rotating equipments like compressors, pumps,turbines in Petrochemical and Oil & Gas Industry in India and Middle East. Worked with Shell affiliate NOCIL in India, Reliance India and Sabic, KSA as Mech.Technician & Supervisor.

QA/QC Engineer in onshore oil field with ASNT Level -II in UT RT PT MT . M.TECH and B.TECH in Mechanical Engineering.B.TE

Electricial technician now i am working in mask oil qatar

PDS(2.5Years),SmartPlant,Navisworks,MicrostationV7.1(3Years),AutoCad2006(5 years),MS-Office

Skill: 11 Years Structural designer ( Including 2 Y rs. in PDMS , 2 Yrs. in PDS & Micro-Station ,3 Yrs. in X-Steel , 4 Yrs. Auto-Cad ) Qualification: B.E Production Engineering - First class – April 2009 – MIT Anna University, Diploma in Mechanical Engineering – First class - April 1998.

I start my profession life from Techno Agriculture when I done Agriculture machinery repairing. After that I went to Saudi Oger and work on Hydraulic

Total 7+ years of experience in Refinery, Petro chemical, Power Plants (steel & RCC structures) and Industrial Buildings.

Project Engineer with filed experience in Marine industry, oil & gas and renewable energy industry

A qualified mechanical engineer having a litany of professional courses with 11+ years of extensive track record in heading key engineering divisions and technical operations/maintenance, across diverse geographical locations in the Oil & Gas industry, seeking a managerial/engineering position with

Rock physics / Petrophysics

“Petroleum and Gases” University Ploiesti, Romania

Over 6 years of experience in analysis and design of steel and concrete structures

15 Years Geospatial Experience. Oil/Gas, Pipeline Design/Engineering, Land Management, Geospatial RDMS

I am an Instrument Designer with more than 25 years experience, predominantly in the Oil and Gas Industry. I have extensive supervisory experience in multi-discipline and multi-national working enviroments.

Lead Auditor - ISO 9001:2000 Series; CSWIP 3.2 Senior Welding Inspector; CSWIP 3.4 Radiographic Film Interpreter for Group A & B materials; CSWIP - BGas Grade 2 Painting Inspector; 28 years of oil and gas industry experience both onshore and offshore. 5 years Refinery experience as Plant Inspector.

Talented and accomplished Naval Architect with extensive FPSO, FSO Conversion, Ship Design and Shipbuilding background particularly in the areas of trim and stability, strength of ships and ship structures. Proven ability to design FSO, FPSO and various types of ships. Able to liaison between tech

Well established Petroleum Exploration and System Analyst with over 15 years of experience in the international petroleum industry combined with a PhD in Petroleum Geochemistry.

I am a fully qualified and experienced Health, Safety and Environmental professional with 14 years upstream Oil & Gas industry experience working around the world for International Oil companies

Registered Professional Engineer in Ontario, Canada, Mechanical Engineer BSc. & M.Eng.

Project Management and General Management Professional

Project /construction director/manager FPFO, Jacket and decks, Modules, loading terminals (shallow and deep water)

Has proven ability in design engineering, fabrication drawing detailing, material quantity estimation, fabrication, and installation & commissioning supervision. Familiar with international design codes, standards, procedures, and engineering practices.

Sr. piping design

Professional Civil Engineer with over 11 years of experience in the oil and gas industry focused in the analysis and design of different types of structures, such as frameworks, pipe racks, bridge trusses, operation platforms, vertical tanks supports and their foundation, and retaining walls.

A geologist with experience in the oil industry involving exploration and development projects in Guatemala South Peten basin, geological information database management, mud logging in oil drilling activities, oil tanks gauging(1996-2004). Logging geologist in USA (Nov 2005-Mar 2009)

Experienced and motivated Ph.D mechanical Engineer

Oilfield Experience 34 years. 33 years with Well Services. I began my career as Well services Technician and my last jobs with Well Services as a Team Leader responsible for Slick Line operation in both Gas and Oil wells.

Civil engineer/pipeline precommissioning

multi-disciplined autocad designer

Performing work as per international standards following operational excellence management system

Extensive 20+ year’s professional experience in instrumentation, control and automation for Oil, Gas and Petrochemical industries.

I have sufficient exposure in dealing with International Audit and Inspection like MCA-UK., U.S.F.D.A., MCC - South Africa, WHO Etc. Man Management is my proven skill for years. Maintain focus on achieving bottom line result while formulating and implementing the advanced technolog and productivity.

Experienced Drilling and DHS Supervisor

M.Tech Geo-Engineering, 9 years of proven industry experience in Geology, GIS, RS, Image processing, QA & Testing, Performance Engineering on Financial, Accounting, CRM, ERP, Retail, B2C Web & Client Server applications like ESRI arcGIS, ERDAS, MapInfo, AutoCAD, Java, J2EE & .Net, Data Warehousing

Perform all oil and gas estings, envirmental testings, wwtp testing, utility relating testing, chemical preprations, well testings, auxlery fireman, first aider, isorelating working, hse relating working, master in chemistry,

Instrumentation and Control - FEED, Detail Design, Construction, Pre-Commissioning, Commissioning

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out