Resume - Instrument and Control Engineer

Misco Jobs

Resume #80506

CONTACT INFORMATION:
View contact information...

Objective
„Ï An expert Instrument and Control Engineer in an international oil, gas or petrochemical Company or market.

Education and University Experience

BS in Electrical Engineering, Orumyeh University: Orumyeh, Iran (From 1997 to 2001)

„Ï Senior Project: Defibrillator
„Ï Internship: Instrument and Control of Shahre Ray Power plant

As Trainer:

„Ï PDMS Trainer in I&C department in EIED Co.

Work Experience

OIEC Company (Oil Industries Engineering & Construction Company) TEHRAN, IRAN (From 2006 to Oct 2008)

Position in I&C department: Senior Instrument & Control Engineer

„Ï Khozestan Heavy Refinery Plant (April 2008)
As assistance of Instrument and Control Lead Engineer
Proposal preparation for Basic design and the project has been given to OIEC.

„Ï NGL SIRRI Plant (From July 2006 to Oct 2008)
As Senior Instrument and Control Engineer
Instrument datasheets, Review and check of Dehydration and Mercury removal package¡K

„Ï Qom III Compressor station Plant (From July 2006 End of 2006)
As Senior Instrument and Control Engineer

„Ï Technical procedure preparation as reference in I&C department (From 2006 to 2007)
As Senior Instrument and Control Engineer

Iran Lavak Co. TEHRAN, IRAN (Apr 2008- Oct 2008)

„Ï Flash Tank Lavan Project
As Instrument Engineer

SAZEH Consultant and Construction TEHRAN, IRAN (From 2002 to 2006)

Last position in I&C department: Instrument and Control Lead Engineer

„Ï ASU#2 Plant (Air Separation and Compressed Air Plant) (From Jan 2006 to July 2006)
As Instrument lead engineer of project. (From Jan 2006 to July 2006)
Joint venture: Linde Co.

„Ï PVC project (From 2004 to 2006)
As Instrument and Control lead engineer of project.
Joint venture: Uhde Co.

„Ï ASCAP Plant (Air Separation and Compressed Air Plant) (From 2002 to 2003)
As assistance of Instrument lead engineer of project.
Joint venture: Linde Co.

Summary of Responsibility

„Ï Design experience in instrumentation of Oil, Gas & Petrochemical industry.
„Ï Basic and Detail design in accordance with American and European standards such as API, ISA, BSI.
„Ï Supervising Cost, Time and Resource for Instrument activities.
„Ï Familiar with DCS, FOUNDATION FIELDBUS and HART. Familiar with Ladder Diagram and PLC Programming and System Monitoring Design with WINCC.
„Ï Familiar with SIL and safety concepts (IEC 61508 and IEC 61511).
„Ï Experienced in instrument specifications and datasheets, Flow, level, Pressure, Temperature and valves.
„Ï Instrument calculations and Sizing.
„Ï P&ID mechanization in accordance with ISA standards.
„Ï Evaluating bids and tender documents.
„Ï Participation in coordination meeting with vendors, client and inter disciplines.
„Ï Experienced in detailed documents/drawings: Hook-ups, Routings, grounding, cable schedules, Loop diagram, JB wiring¡K
„Ï Preparation of I&C department quality documents such as I&C Procedures, job planning, Input and Output checklist...
„Ï Preparing project proposal.
„Ï Site visiting.

Computer Knowledge and Skills

Engineering Software Packages

„Ï INTOOLS
„Ï PDMS (Plant Design Management System)
„Ï CONVAL
„Ï Visual Basic Application & Macros on Microsoft Excel

General Software:

„Ï Microsoft Office (Excel, Access and Word)
„Ï AutoCAD

Other Skills

„Ï Certificate in PLC S7-200 from FESTO Co.
„Ï Certificate in PLC S7-300 from FESTO Co.
„Ï Certificate in ISO 9001/2000 from DNV.
„Ï Certificate in PDMS 3D Modeling.
„Ï Familiar with requirement of ISO/TS29001:2003
„Ï Certificate in Microsoft Access
„Ï Instrument Design course Training (From Dec 2006 To Feb 2008) by KROHNEH specialist

Study Interests

„Ï SIL and Safety Concept

References
References are available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 7046)

Go to Search Parameters...

Brief Description

Well servicing (Coiltubing, Wireline and Pumping Operations).

+15 yrs exp,Concept,FEED,Detail Engineering,Oil/Gas,onshore,offshore,power plants,Rotating Equipment,Pumps,Compressors,Turbines,Engines,Pressure Vessels,Tanks,Heat Exchangers,Chemical Injection,Instrument Air,Fire Protection,Cranes,Equipment Selection,Specification,Data Sheets,TBE,Vendor Data Review

Refinery operation, technical service to hydrocracker/hydrogen/sulphur recovery unit, commissioning of hydrocracker/hydrogen/effluent treatment plant

16 years of Piping & Pipelines Projects execution experience in the Industries Refinery, Hydrocarbon and Oil & Gas (Project piping, pipelines, Tanks, structurals, equipments). Knowledge of ASME Sections, ANSI, API & DIN codes /Standards.

Pipeline Integrity Engineer with Metallurgical & Material Engineering background, extensive experiences in the oil/gas both Offshore and Onshore (and swamp) pipelines.

FEA ENGINEER-ANSYS,HYPERMESH,ABAQUS

Masters in Electrical Engineering. Four year experienced. Skills: MATLAB, PLC Programming, Simulation,HSPICE,MULTISIM, Assembly Language, AutoCAD, Visual Basic, C/C++, Operating Systems

Sr. Structural Engineer-Ports, Marine & Offshore 8 years experienced, with knowledge of SACS, StaadPro, SAP

Mechanical Engineer with over 16 years experience within the hydrocarbons onshore & offshore, mineral processing and manufacturing industries. Degree & trade qualified experience includes, engineering design, construction, shutdowns, commissioning and maintenance. Over 10 years of on-site constru

BE Electronics, Experience in Project erection & Commissioning of Electrical & Instrumentation, Procurement of Elec & Inst. Materials

Diploma in Electrical Engineer. AutoCAD. Word. Excel. Windows.

Sr.Mechanical Engineer having 16 yrs of Experience in Petrochemical, Oil&Gas field

Experienced Engineer with 15+ years of on job experience. Conversant with ISO ,international standards and Oil and Gas industry requirements. Can lead a team of inspectors .Has worked in Saudi Arabia, Yemen, UAE and Kazakhstan. Largest contract Value 1.3 Billion USD.

Being a petroleum engineer and having many years of experiences on middle eastern countries ( OMAN,UNITED ARAB EMIRATES, QATAR, IRAN...) could merit for any advertised jobs.

OBJECTIVE My goal is use my chemical and process engineering knowledge in a position as a Process Engineer or simulation engineer in the Refining Industry. Also I would be interested in using my knowledge in Logistics in any Industry

Five Years (1/2003 : Until now ) as HSE Engineer, Supporting Health, Safety, Environmental Protection, Fire security and Training Requirements Relating to the Full Range for Offshore and Onshore Construction and Operational Activities of Oil and Gas Industry in Petroleum Company.

Reservoir and Production Engineer

Senior Mechanical / Piping / Materials Handling / Pneumatic Design Specialist, Checker, Design Supervisor, Project Manager or Consultant

Piping Layout,Equipment Layout,Nozzle Orientation,Vendor Drawing commenting,PDS,Microstation,GAD Extraction,Isometric extraction,Piping & Rack StudyClash resolving,Smart Plant Review

MORE THAN 5 YEARS EXP AS A SAFETY OFFICER IN OIL & GAS CONSTRUCRTION PROJECTS BOTH IN ONSHORE & OFFSHORE

11 years of NDT experience in the Middle East

Instrument Design Engineer; Instrument Site Supervisor c. PMT Instrument Field Engineer

Sizing process systems, Conceptual Design on projects : carrying out engineering studies at initiation, feasibility studies & concept selection,Process simulation & datasheet preparation ,Knowledge of Design Reviews and HAZOP studies,Preparation of PFD’s and P & ID’s,(B.Tech in Chemical Engineering)

CSWIP 3.1 certificate # 25917/2 ,TWI, U.K

I have nearly 5.5 years experience in piping material engineering pertaining to petrochemical projects with renowned EPC contractors. During this time I have been responsible for various piping material related activities like piping class preparation, TBE, vendor drawing review.

qa/qc inspector (welding or piping inspector)

wireline specialist and downhole gauges engineer

Chartered electrical engineer experienced in Instruemntation filed. Trained in QMS ISO Lead auditor course.

Mech Engineer, 10 years EPC experience in packages for oil & gas; gas dehydration, stabilization, water, effluent, pumps, utility equipment

Safety Officer with more than eight years of experience and presently working in Saudi Arabia with Saudi ARAMCO projects.

Facility Engineer for oil and gas

Graduate in Electrical Engineering, with 14 year experience, of which 6 years in Refinery/Gas plant. Familiar with all maintenance & construction activities.

Very good exposure to conceptualisation, business developement, sales, erection, installation, commissioning and O&M of Lean burn Gasengines/ Diesel engines

Senior PDS Designer

Master in Chemical Engineering, 3 year experience as mud engineer

Highly competent, result oriented Drilling Engineer with three years of extensive experience in drilling optimization of horizontal, directional and extended reach wells. Demonstrated skill as a successful team leader and team player. Masters in Petroleum Engineering from University of Oklahoma.

Canadian Sr. Control Systems Engineer (process control). PLC/DCS programming. I &C Design.

Exploration Geophysicist

Mechanical Engineer - Static Equipment (Design & Detailed Engineering of Pressure Vessels, Columns, Column Internals, Heat Exchangers & Storage Tanks based on various Design Codes & Standards.)

Piping designer /supervisor , PDS designer

Instrument and Control Engineer

More than 11.10 (8.10 years in Saudi Arabia, 5 months in Qatar, 1.7 years in Abu Dhabi UAE & 1 year in India) years of extensive experience in Quality Assurance and Quality Control in Oil, Gas & Petrochemical Projects, Acetic Acid Project, Ammonia Urea Expansion Project and Power Plants involving En

B Tech Degree in Mechanical engineering with 6+ years experience as a Production Planning and Material engineer in manufacturing of Oilfield equipments, Pressure Boilers, Process plants.

Searching for a challenging job in the field of PetroChemical engineering. Expert in MS Office and other computer operations.

6 years of experience in oil reservoir management. Development & monitoring low quality multilayered reservoirs. Preparing development plan, production forecast & the budget. DST, hydraulic fracture & acidizing operations supervision. Water flooding designing, operations & surveillance.

Instrument Design engineer having 6+ yrs of experience

POST GRADUATE - MTECH MECHANICAL (FROM NIT NAGPUR-INDIA),STORAGE TANK

Electrican and Instrumentation Design and Site Construction. LV Distribution, MCC, UPS, Lightings, Field Instrumentation, SCADA, Shutdown Systems, Fire and Gas Systems, Gas Station Facility Design, Pipeline Facility, Cathodic Proteection

I have 20 years experience across the petrochemical industry, including Petrochemical refining, offshore gas compression, FPSO experience, and fixed platform oil/gas separation and export. Supervisory/Control Room/Commissioning. In many countries, Singapore, Dubai, Qatar, Brazil, U.K.

Over 20 years of various offshore vessels, ship yards, offshore rig, gas platforms, drill ship and engine factories as Oilier, Junior Engineer, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Chief Engineer, experience with expertise in following: Supervision and Tra

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out