Resume - Piping Designer - Mechanical / Piping.

Misco Jobs

Resume #80604

CONTACT INFORMATION:
View contact information...

Sr. Mechanical / Piping Designer

CARRIER SUMMARY

Piping Designer - Mechanical / Piping.

Over 21 years experience as CADD / Mech. / Piping Designer. 13 years of experience were dedicated to Oil, Gas and Petrochemical in different SABIC affiliates in Kingdom of Saudi Arabia and Bahrain. Experienced in preparation of detail Engineering, Piping drawings, Pressure vessels and fabrication drawings, Erection and maintenance. Fully conversant with SARAMCO, RCC, SABIC and international standards as well as the specifications of ANSI 31 and ASME

Work Experience

Company: Occidental Mukhaizna LLC-Upstream (OXY)
(Supplied by TR Engineering W.L.L)

Designation: Sr. Piping Designer
Duration: July 2008 to Till Date

Job Profile

Senior Piping Designer
Design and Preparation of Piping layouts and Isometric Drawings, Bulk MTO for Oil production plants, oil wells and steam lines for steam injection oil wells.
Assignments Handled in OXY:

„« Oil Transmission network: Design Preparation of Piping Layouts, Isometric Drawings and Fabrication Drawings

* Steam network Preparation of Piping Layouts, Isometrics Drawings for Steam injection for Oil Wells and wellhead Piping and Oil production plants.

Company: The Bahrain Petroleum company - (BAPCO)-Upstream
(Supplied by HESTON International Company W.L.L) (www.bapco.net)

Designation: Mechanical Designer
Duration: Mar 2006 to July 2008

Job Profile

Mechanical Designer:
Preparing piping layouts and Isometric Drawings for PCMS (Plant Corrosion Monitoring System) for General Dehydrogenation Units. And preparing Isometrics for Gas and Oil well area to GDUs, Well manifolds and Tank Batteries. Test packs and safety instruction sheets
Assignments Handled in BAPCO:

„« Gas Transmission network: Design Preparation of Piping Layouts, Isometric Drawings, Fabrication Drawings and cross country piping and Highway crossing

* PCMS: Preparation of Piping Layouts, Isometrics Drawings for Gas Dehydration units, Well head Piping for Oil and Gas wells, Tank Batteries and Well Manifolds, Gas Distribution Point

Company: Saudi International Petrochemical Company- Sipchem
(Supplied by Dar Al-Riyadh Consultants)(www.datalriyadh.com)

Designation: Mechanical Designer
Duration: June 2005 to Jan 2006

Job Profile

Mechanical Designer:

Preparing piping layouts and Isometric Drawings for Methanol and BDO plants and as-built the plant documents
Assignments Handled in Sipchem:

„« Natural Gas Filtering System: Design and Preparation of Piping Layouts, Isometrics Drawings for Natural Gas Piping
Company: Saudi European Petrochemical Company - IBN ZAHR (SABIC)
(Supplied by Dar Al-Riyadh Consultants) (www.datalriyadh.com)

Designation: Mechanical Designer
Duration: Nov 2001 to Jun 2005

Job Profile

Mechanical Designer:

Preparing packages for new Projects for EPC contractor. Attending Independently PCRs (Plant Change Request) related piping modifications in Existing plant. (MTBE and Polypropylene)

Attending Plant turnarounds and Capital projects involving site visits for Implementation of AFC (Approved for Construction), with using ANSI,ASME ASTM and API,MSS Standards and design office activities. Design office coordination

EDMS (Engineering Data Management System - Projectwise - Bentley) Administration, Customizing and Trouble shooting

Assignments Handled in IBN ZAHR-SABIC:

„« Over all Plant AS-built: Review and Update P & ID¡¦s, Piping Layouts, Isometrics Drawings, and related Plant documents

„« EDMS: Successful Installation Administration and customizing the EDMS (Engineering Data Management System - Bentley Projectwise V8.1) training for end users and trouble shooting

Company: Al-Jubail Petrochemical Company - KEMYA (SABIC)
(Supplied by Dar Al-Riyadh Consultants) (www.datalriyadh.com)

Designation: Mechanical Designer / Design Draftsman
Duration: May 1999 to Nov 2001

Job Profile

Mechanical Designer / Design Draftsman:
Preparing packages for new Projects. Attending Independently for DCRs (Design Change Request) related piping modifications in Existing plant. (LLDPE, LDPE and Olifins)

Attending Plant turnarounds and Preparing for pre-construction packages for projects. Implementation of AFC (Approved for Construction), updating Related Drawings and Documents performed design office activities and coordination with Documentation

EDMS (Engineering Data Management System - Projectwise - Bentley) Administration, Customizing and Trouble shooting

Assignments Handled in KEMYA-SABIC:

„« Over all Plant AS-built: Review and Update P & ID¡¦s, Piping Layouts, Isometrics Drawings, and related Plant documents

„« Instrument Air Facility: Modification of P & IDs, Piping Layouts, prepares isometric drawings for Instrument air connection for Boilers as per the site condition
Company: Saudi European Petrochemical Company - IBN ZAHR (SABIC)
(Supplied by Dar Al-Riyadh Consultants) (www.datalriyadh.com)

Designation: Mechanical Designer
Duration: July 1995 to May 1999

Job Profile

AutoCAD Mechanical Design Draftsman:

Attending PCR (Plant Change Request) related piping modifications in Existing MTBE and Polypropylene plan

Attending Plant turnarounds and Capital projects involving site visits for Implementation of AFC (Approved for Construction) and Design office activities. Design office coordination

Assignments Handled in IBN ZAHR-SABIC:

„« Over all Plant AS-built: Review and Update P & ID¡¦s, Piping Layouts, Isometrics Drawings, and related Plant documents

„« P & ID As-Built: Review p & ID's as-built as per site

Company: The KCP Limited - Chennai - India

Designation: Mechanical Draftsman
Duration: 1992 to 1995

Job Profile

Mechanical Draftsman:

Preparation of P & ID. Plant layouts, Piping Layouts, Isometric Drawings and Detail Drawings for Sugar plant and Boiler Piping for IBR Approval (HP & LP piping)

Preparing Specifications for Pipes and Valves

Assignments Handled in The KCP Limited:

„« Vietnam Sugars: Preparing P&ID, plant layout, piping drawings, Isometrics. Bill of materials for HP and LP steam piping and sugar plant piping

Company: IDEA PVT Limited - Chennai - India

Designation: Draftsman
Duration: 1989 to 1992

Job Profile

Draftsman:

Worked for UBPP-Chennai, IPCL, Torrent Bio-Tech (Cochin), Preparation of P&ID drawings, Plant Layouts, Piping Layouts, Preparation of Isometric drawings as per standards

Company: Sri Parthasaradhi Cements and Industries Limited-India

Designation: Mechanical Supervisor
Duration: 1987 to 1989

Job Profile

Mechanical Supervisor:

Operation, Maintenance and Erection of Cement Machinery

Computer Knowledge:

Operating System: Widows 2000 and XP (server and Work Station)

Packages/Software¡¦s: AutoCAD 2008, Microstation SE/J/V8 2004 and IRAS/B V8 2004 (Raster Editor), Plant Space P&ID and Other Raster editors, and Microsoft Office 2003 and Adobe Acrobat Professional V8.0

Personal Details

Name: Kota Venugopal

Date of Birth: 15 August 1967

Educational Qualification: Diploma in Mechanical Engg.

Age: 41 Years

Nationality: Indian

Marital Status: Married

Driving License: Valid Bahrain Driving License
Valid Oman Driving License

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 7051)

Go to Search Parameters...

Brief Description

Under Ground Piping Specialist

Accomplished petroleum exploration and production manager of people and projects. Proven broad-based experience in multi-disciplinary exploitation of petroleum reserves, evaluation work in acquisition and divestitures, information technology and project management.

A Civil/Structural Engineer having 14+ years of Consultancy experience in Structural Design and Project Management for Process, Oil & Gas and Power & Energy Projects. I have good knowledge and experience of Canadian, British, Indian, American & various Process industry standards.

Control System engineer with more than 14 years of experience with Yokogawa Systems Engineering

Electrical & Instrumentation Engineer experienced in Testing & Commissioning Instruments in FPSO, Installation of Electrical services in the Power plants (Gas turbine, Hydro, Steam turbine), Commercial Buildings, MRT and Commissioning of Process Control System in Water Treatment Plant.

APPLICATION FOR THE POST OF BLASTING AND PAINTING SUPERINTENDENT

I have different skills from farming to superivor to general labor skills inthe oil and gas industary.amd also I have some sales experance

Lead Drilling Fluids Engineer / Mud Engineer / Drilling fluids specilalist/ Mud Manager/Drilling Supervisor/ Drilling Engineer

I am Mech Engg post graduate(Prodn Engg). I have experience in using CAE packages Hypermesh,Ansa and Nastran and performing static ,Normal mode and fatigue analysis

28 years experience with industrial design drafting work. Assignments have involved equipment layouts, P&ID development, material take-offs, estimating, checking and field work in addition to developing construction drawings and fabrication isometrics.

Electrical Technician with 20 years experience in the oil and gas industry.

A total of 10+ years experience in Pipe Stress Engineering and Mechanical Stress Analysis in

Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.

Application For Mechanical Inspector/Engineer

B.Tech (Mechanical Engg-5years's degree course with SAP experience in Procurement in Oil /Petroleum Refinery in India)

Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.

Petroleum Engineer with 13 years experience in the Oil and Gas Industry with solid knowledge in Geopressure analysis, Well design, MWD operations and rock properties analysis; project management skill (estimating/cost, control/scheduling); bilingual Spanish-English; APEGGA EIT# 92804 and Worldwide.

To obtain a position as Suitable position in process control Instrumentation that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.

Highly Qualified Draughtsman

Total Of 16 Years Experience In Drafting And Detailing Of Piping Drawings And Other Drawings In Compliance With The International Standards. Experience Achieved Is In Line Of The Chemical / Petrochemical / Refinery And Connected Utilities Piping Jobs.

PDMS mid-level piping designer with a specialty in PDMS DRAFT, Misc. pipe supports, equipment modeling and sloped pipe.

Production/drilling engineer hold Master from IFP; working in Workover operation

Free! Worked as a Drilling Fluids Engineer / Technical Service Coordinator for the past 13 years.

Installation, commissioning, testing & operation of transformers, Power Control Centre, Machine Control Centre Panels

M.Sc with 15 years Laboratory experience in Analytical Lab.

Electrical Engineer

Piping Engineer (PDMS)

PDMS AUtocad 3d Multisteel Civil/Structural Design Draughtsman

I have been described in previous positions as hard working; honest; reliable; a team player and a good communicator. It has been said that I excel in new challenges and I have an excellent work record.I am at present available to take up any position within the cementing or tools in a supervisory

Preparation of FEED & ITB documents (Instrumentation, Telecom & F&G)

Able to plan, organize, and implement complex design projects within prescribed time and budget. Field experience and Construction Representative on major projects. Worked and knowledge of ASME B31.3, API, and ASTM.

Piping design and checking:Cadworx, Bentley 3D, Autoplant

Piping Designer - Mechanical / Piping.

G&G and engineering data management, MS-Office applications; petroleum software and databases, industry regulations, regulatory form preparations etc.

I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.

I have had twenty years experience in the Petroleum Industry ranging from Drilling, Production, Completion, and Work-over engineering in all types and configurations of wells and drilling units/production platforms both onshore as well as offshore. I have worked in Canada, Saudi Arabia and Thailand.

20+ years in offshore engineering; including marine, structural, pipeline, and project engineering

About 25 years of Process Engineering experience including fifteen years with EPC companies in the Arabian Gulf states in the Oil & Gas industry.

Sr. Rotating Equipment Engineer with 20years experience in Turbo-compressors up to 42 MW rating of Refinery, Petrochemicals & Ammonia Plants. In depth experience in troubleshooting, maintenance/major overhauling/modifications, failure analysis, condition monitoring and vibration analysis

Backround in Electrical Engineering/Design with emphasis of Project Management, Production/Manufacturing with more than 15 years experience in Electrical Design/Construction work and familiar with Standards Procedures as well as with the Industry standards such as ANSI, API, NEC, etc

Senior Rotating Engineer

A Process Engineer with a Masters Degree in Chemical Engineering from the University of Waterloo, ON, Canada and 10+ years experience in natural gas and polymer processing industries. Specialize in process optimization, manufacturing and troubleshooting.

I have over 16 years of working experience as a QC Inspector in petroleum and petrochemical construction Industry. I have knowledge and experience as Q/C inspector in various inspection activity like raw material inspection, welding procedure / welder performance qualification,various methods of NDT

I've developed leadership qualities and a proactive attitude, all of these combined with my experience in Maintenance and Well Production Operations, supported with software and techniques on Equipment condition analysis, laser alignment, corrosion testing, boroscopic inspection and vibration analys

Mechanical engineer in Oil&Gas Feild 18 yrs Experience in Installation, maintenance, QC in Static, Rotating equipments.

Able to learn Work Process and new software with ease. Experienced in the refinery of Blueprints, Isometrics, and P&ID¡¦s, Hand Skecthes. Experienced in structural steel supports and familiar in estimating material take-offs. Trouble shooting installation of pipe and assist Engineers in the field.

PhD Petroleum Engineer (Production Technologist)

M tech stctural engineer in Civil department, i am having expeerience in oil and gas as sr engineer in civil and structural department.

Assistant Driller - Main activities and responsibilities on the rig DRILLMEC HH - 220

Project Engineer & System engineer along with detail design experience and product development expertise gained from 20+ years working for NASA.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out