Resume - Oilfield Experience: 25 years

Misco Jobs

Resume #80843

CONTACT INFORMATION:
View contact information...

Education
1978 High School Certificate

Experience
Schlumberger Well Service Vietnam – Premier Oil & Idemitsu. Sept 2006 - Jan 28th 2006

Schlumberger Well Service Vietnam - for Premier Oil & Idemitsu Work as lead Cementing Engineer, Field DUA - 5X RE and Blackbird 12E-CS-1X. And IDEMITSU Well 05-1c-DH-1X& Rig Ocean - General in Viet Nam., Plan to completed 2 wells for Premier - Oil Dua - 5X RE and Blackbird 12E - CS - 1X, And one well for IDEMITSU Well 05 - 1C - DH - 1X, Field Service Quality Responsibilities, & Trained the local staff on cementing down hole tools and Weatherford SSR Cement Head and Plugs and Maintenance and Operations, And Daily operations needs and Preparations for Premier Oil & Idemitsu - Viet Nam: Chemicals, casing hardware, equipment, Packers, Cement Heads and Mechanical Setting Tools before starting the project. And has done all cementing job on all 3 wells successfully.

Schlumberger Well Service Vietnam – Vietsovpetro. May 1st - 2006 - to July - 30th - 2006

Schlumberger Well Service Vietnam – Vietsovpetro Down hole tool specialist in 2006 (WPS) Frac campaign for Vietsovpetro, - Field Service Quality Responsibilities, & Trained the local staff in downhole tools - packers, cement retainers, Bridge Plug, mechanical setting tools and so on. Daily operations needs, Preparations for VSOP - FRAC at Viet Nam: Tuan Luong Van Equipment Operator Well Services and WCP Nguyen Trung Qui (FET) and Nguyen Duy Phong (FST) and Nguyen Nam Trang (FET) - WCP they run in hole 5 -1/2" Bridge Plug 3 well's and set 3 each Bridge Plug,
* 5 -1/2" Positrieve Packer set & unset 5 well's 5 time
* 5 -1/2" Sump Packer Run In Hole and set one ea @ Well # 1018 at MSP # 10 done by Tuan Luong Van Well Services Equipment Operator, and Nguyen Trung Qui (FET) and Nguyen Duy Phong (FST) and Nguyen Nam Trang (FET)- WCP Vung - Tau Viet Nam,

Preparation for VSOP - FRAC at Viet Nam:Chemicals, equipment, Packers, Mechanical Setting Tools and X - Overs and Spare Parts and Cement Retainer 80Duro ( 200-350F) C / W Short Convert Bridge Plug 5 1/2" before starting the project,

Awarded with acknowledgment letters from VSP Vietnam

Schlumberger Well Service Vietnam March 1st - 2006 - April - 30th - 2006

Schlumberger Well Service Vietnam, Preparations for Premier Oil & Idemitsu and VSP - FRAC at Viet Nam: Chemicals, casing hardware, equipment, Packers, Cement Heads and Mechanical Setting
Tools before starting the project

Preparations for Myanmar: casing hardware, equipment, Water Bushing & Cement Retainer/Bridge Plugs and Circulating Swages and Mechanical Setting Tools and X - Overs and Short Convert Bridging Plug before starting the project.

Schlumberger Well Service Vietnam – Vietsovpetro. 1st January 2006 – 28th February 2006

Schlumberger Well Service Vietnam, Work at Rig on MSP # 9 VSOP Well VSP # 925 Field White Tiger Water Shut-in or Water Control, Operation, Work as lead Supervisor, Job complete as per high standard service quality we pump without TAM packer as a dual injection mixed and pumped all fluid as per VSP contract requirements.

- On service report client comments we did a good job, ticket signed by D.DLam-VSP.Representative.
and
- Awarded with acknowledgment letters from VSP Vietnam.

Pumped cement plug after 22 hours, tag top of cement at 4050 meters. Plus minus 30 meters lower than expected depth due to bottom of hole should be over sized wash out and other reason is could be due to losses some of our cement volume inside open hole. Top of plug they applied 4 tons weight. Surface sample hard after 12 hours,
Field Service Quality Responsibilities, & Trained the local staff And Daily operations needs and Preparations for VSOP - Viet Nam: Chemicals & Cement etc.

Schlumberger Well Service Vietnam – KNOC March 2005 – December. 28th 2005

Schlumberger Well Service Vietnam - K.N.O.C Work as lead Cementing Engineer, Field RONG - TRE. & Rig Ocean - General in Viet Nam., Plan to completed 2 wells RT - 1X and RBC - 1X, Field Service Quality Responsibilities, & Trained the local staff on cementing down hole tools and Weatherford SSR Cement Head and Plugs and Maintenance and Operations, And Daily operations needs and Preparations for K.N.O.C - Viet Nam: Chemicals, casing hardware, equipment, Packers, Cement Heads and Mechanical Setting Tools before starting the project. And done all cementing job on both wells.

Schlumberger Well Service Vietnam – PIDC October 2004 – February. 28th 2005

Schlumberger Well Service Vietnam - P.I.D.C Work as lead Cementing Engineer, Field. HANOI BASIN... & Rig ZJ45L - 002 Land Rig North Of Viet Nam., Plan to completed 2 wells - PV - THC - 04 and - PV - DQD - 1X, Field Service Quality Responsibilities, & Trained the local staff on cementing down hole tools and Conventional Full Bore Cement Head and Plugs and Maintenance and Operations, And Daily operations needs and Preparations for PIDC Land Operation at Hanoi Viet Nam: Chemicals, casing hardware, equipment, Packers, Cement Heads and Mechanical Setting Tools before starting the project. And rig up on location for the first well and done all cementing job on two wells.
Awarded with Acknowledgment letters from PIDC - Vietnam.

Schlumberger Well Service Vietnam – PVEP December 2003 – September. 30th 2004

Work as lead Cementing Engineer, Field DAI HUNG and DOI MOI & Rig Ocean General, And completed 4 wells - DH - 14X and - DH - 15X, and 09.3 - DM - 1X- And 5wells Completion 05 - DH - 12X and 05 - DH - 7X and 05 - DH - 8P and 05 - DH - 9P and 05 - DH - 10P,Field Service Quality Responsibilities, & Trained the local staff on cementing down hole tools and BJ and Weatherford Sub Sea Cement Head and Sub Sea Plugs and Darts System Maintenance and Operations, And Daily operations needs and Help During Coiled Tubing and Nitrogen pumping for Kick - Off / Gas Lift well 05 - DH - 8P,Field service quality responsibility. Training the local staff. On cementing daily operation needs.
Awarded with Acknowledgment letters from PVEP - Vietnam.

Schlumberger Well Service Vietnam – Vietsovpetro September 2003 – to November 2003

Vietsovpetro downhole tool specialist in 2003 (WPS) Frac campaign for Vietsovpetro - Field service quality responsibility. Meeting with the client, introducing the knowledge and experience of Schlumberger to the client on executive level (Vietsovpetro staff, participating in the frac job) Training the local staff in downhole tools – packers, cement retainers, bridge plugs, mechanical setting tools and so on. Daily operational needs.

Schlumberger Well Service Vietnam – Vietsovpetro May 2003 – to August 2003

Work as lead cementing engineer- Field Daihung and Rig Ocean General. Completed two wells 05-DH-8P & 05-DH-9P. Field service quality responsibility. Training the local staff. On cementing daily operation needs.

Schlumberger Well Service Vietnam – BP July 2001 – to JAN 2003

Work as Lead Service Supervisor – Cementing & Down hole tools. And run preparations to start the project. BP Nam Con Son Basin Natural Gas Development Drilling Project & BP Hai Thach Field HPHT Appraisal well Drilling Project. Awarded with Acknowledgment letters from BP-Vietnam.

Schlumberger Well Service Sakhalin – Sakhalin Energy Investment Company. Nov 2000-Dec 2000

Work as Lead Service Supervisor - Cementing and downhole tools

Schlumberger Well Service Vietnam – Vietsovpetro August 2000 – to October 2000

Cementing Engineer, Field DAI HUNG & CHOM CHOM, Rig Sedco 600, completed 2 wells

Schlumberger Well Service Vietnam – Anzoil Feb 1999 – to JULY 2000

Service Supervisor/ Cementing Engineer on land location, North of Vietnam, completed 3 gas wells.

Awarded with Acknowledgment letters from Anzoil Vietnam.

Schlumberger Well Service Thailand. ESSO. Dec – 1998 – to Jan 1999
Work as team Member of Fracturing job @ NAM PHONG # 8, Khon Khen ESSO,

Schlumberger Well Service Vietnam – Vietsovpetro 1997 – 1998

Down hole tools specialist in 97 / 98 Frac campaign for Vietsovpetro. (WPS) - Field service quality responsibility. Trained the local staff in downhole tools – packers, cement retainers, bridge plugs, mechanical setting tools and so on. Daily operational needs.

Laos – MONUMENT Resources (Overseas) Limited Apr 1998 - Jul 1998

Lead engineer for cementing and down hole tools with MONUMENT Resources (Oversea) Limited.
Awarded with Acknowledgment letters from MONUMENT Oil & Gas RESOURCES (OVERSEA) Ltd. – LAOS PROJECT.

Schlumberger Well Service Vietnam – Anzoil Feb 1996 – to DEC 1997

Service Supervisor / Cementing Engineer on onshore location in North of Vietnam, completed 5 wells of oil and gas operations.
Awarded with Acknowledgment letters from Anzoil Vietnam.

Schlumberger Well Service Vietnam – Vietsovpetro, TOTAL, BHP, IDEMITSU Jan 95 – Jan 96

Cementing Engineer & Down Hole Tools.

Schlumberger Well Service Vietnam – PETRONAS. JAN 1994 – to DEC 1994
Cementing Engineer & Down Hole Tools.

Pakistan - Dowell Schlumberger Nov 1985 – Dec 1993

Cementing engineer, worked with high-pressure water zones and high-pressure gas wells. Mixed and pumped 20 ppg and Thixotropic (RFC) slurries during water flow. Pumped four Matrix Acid jobs with standalone responsibility. Awarded "Acknowledgment letter from O.G.D.C. Pakistan".

Pakistan - Oil and Gas Development Corp. Mar 1980 – Oct 1985

Worked as Floor man

Training
August 21st - up to 26th August 2006 Attend the Downhole Tools Course for Mentors in UTC (013822) course from 21st Aug-26th Aug, Application of down hole tools used in oil field. And train others new comer. The intention of this training is to Train the Trainer, a selection of WCS FS to be the downhole trainer in Well Services locations, and a lot of information, sharing knowledge and experiences,
August 14th - up to 15th August 2005, Terengganu safety training Center SDN - BHD Sea Survival Helicopter Under Water Escape Training & Fire Extinguisher & Self Rescue, Training done on 14th & 15th August 2005 at Kemaman Malaysia. ..
Feb 9th – 20 - 2004. WCS Refresher course, 05# 1346, Schlumberger Training Center in the UK (UTC), Review new technology, service quality standards and etc.

Sep 18 – 2003. Offshore safety & Sea survival and Helicopter Underwater Escape Training (PVMTC), in Vietnam.

Sep 01 – 07 - 2003. WCS Refresher course, 3 # 1074, Schlumberger Training Center in the UK (UTC), Review new technology, service quality standards and etc.

Aug 25 – 29 - 2003. Packer #ID 44-1081 Schlumberger Training Center in the UK (UTC). – Application of downhole tools used in oilfield.

OCT 22 – 25 - 2002. Deep-sea EXPRESS Head Schlumberger Training Center in the UK (UTC) – (231CM104)

OCT 15 – 18 - 2002 PACKER DLT Schlumberger Training Center in the UK (UTC) – (231CM107)
Application of down hole tools used in oil field,

JULY 14 – 18 - 2002 OFS – 2 Seminar for Field Specialists in Cairo, Egypt. – Basic Management School - Introduction to personnel management's,

May 6, 1998 H2S Training, in LAOS, Land Location

Sep 25 - Oct 31, 1987 Equipment Operator Course, UK

Jun 1997 Basic Fire Fighting & Emergency First Aid Courses in Vung Tau, Vietnam.

Jun 5, 1997 Basic Fire Fighting Courses, Vung Tau, Vietnam

May 7, 1997 Refresher Offshore & Sea Survival in Vung Tau, Vietnam

Jun 2, 1997 H2S Training, Vung Tau, Vietnam

Jun 2, 1997 Emergency First Aid and CPR, Vung Tau, Vietnam

Dec 30, 1996 Move smart, Handling and Stepping Technique, Vung Tau, Vietnam.

Nov 18-22, 1996 PACKER 15 at Dowell Schlumberger Training Center in the UK (UTC).

Nov 9-10, 1994 Offshore Safety & Sea Survival, Vietnam

AREAS WORKED TYPE OF SYSTEMS/SERVICES EXPERIENCED
Pakistan, Vietnam, Laos,
Sakhalin & Middle East Thailand. Malaysia. Kemaman. * Downhole tools,
* High pressure water zones cementing,
* High pressure gas wells cementing,
* Thixotropic slurry system,
* GASBLOK slurry system,
* LATEX Slurry System,
* WELL BOND Slurry System,
* P&A, Kick-off and Balanced cement plugs,
* All type of Standard slurry systems,

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 7050)

Go to Search Parameters...

Brief Description

I am a very experienced cementer thats is hard working, enthusiastic, reliable and trustworthy and also able to lean new things fast.

Oilfield Experience: 25 years

Instrument & electrical design and field work

Sr. piping designer/checker, total 21 years experience in oil and gas field

Autocad, Bentley AutoplanXP, Navis Works, Isogen, Excel, Access, Word

Reservoir engineer - Experience in tight sands and shale and CBM

I have more than 10 years of maintenance experience as an instrument technician

I have 15 years experience as Extraction-Production Onshore Oil & Gas Engineer (artificial lift, Sucker Rod Pumping, PCP): Section Head of Field Extraction-Production Onshore Oil & Gas, Technologist Engineer, Night Shift Engineer, Echometer, Optimization Wells, Slickline

NDT Level III

My experience in different Engineering Consultancy Company like SMEC International Ltd.as well International Contractor like Construction & Industrial equipment Ltd in St. Lucia, Caribbean Island, Strabag International assigned in Libya, Willbros International Inc.,Houston Texas, assigned in Nigeria

A highly effective Chemical Engineering Professional who meets challenges head-on and creates positive change. A creative and detail-oriented Six Sigma Black Belt, with a proven record of success in new product development and process improvement; and track record of success developing and leading

BSc in env. MSc in safety eng.

Over 25 years of teaching practical and theoretical in the field of mechanical maintenance in the Philippines and Middle East

Twenty(20) years of experience in detail engineering/FEED/PMC of petrochemical complex/refinery/major industrial projects. 11 years wotking in middle east countrirs. Familiar with international codes and standards.

A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects Having a Degree – Marine Engineer, (Ship Engineer)

Proven ability to provide Industry initiative and leadership. 20 years of experience. Extensive SCADA, PLC, DCS and HMI Project Management Consulting knowledge.

Field Engineer

GRADUATE DIPLOMA HOLDER (3 year fulltime study) in MECHANICAL ENGINEERING, having Certifications as SENIOR WELDING INSPECTOR (CSWIP 3.2) -TWI LONDON, NACE (USA) COATING INSPECTOR LEVEL 1 – CERTIFIED, NQA (UK London) Certificate of Training in ISO 9001-2000 QMS Auditor, ASNT LEVEL II-RT,UT,MT,PT

Petrophysicist, Log analyst

He is the Manager of Technology Development in Exploration & Production in the Corporate Direction of Strategic Planning of PEMEX. Previously, he was Well Productivity Manager in the Technology and Professional Development Vice-presidency of PEMEX Exploration & Production. Also, he has been the head

QA/QC engineer/inspector in piping/pipeline and facilities construction in oil/gas. And an HND in welding/fabrication .

Have wide-ranging experience in Oil & gas (both Onshore & Offshore), refinery and petrochemical industries with good exposure towards Distributed Control Systems, Safeguarding Systems, Fire & Gas Systems and various types of Field Instruments.

I am a 3D PDS piping designer I work in various field of engineering, mostly oil & gas I have also knowledge in structural designing

Geologist, with 18 years of experience in the hydrocarbon sector, working in Venezuela, Trinidad and Tobago, Brazil and Mexico. Good command of computers. Experienced working and studying in a multicultural and diverse environment - Excellent interpersonal, communication and teamwork skills.

Degree: B.E. (Architect) Construction, Civil Works and Buildings expertise & HVAC installation.

Seeking challenging Position in Project Management where I can use my Experience, Market Exposure, Management Skill and Communication to achieve the high goals set by the organisation

7+ Yrs Exp in Mechanical CAD/FEA/CAE/CFD

I have 10 years of experience in E&P business, evaluating basins interms of potential, play maturation, volumetrics,maturing prospects, interpreting seismic data, building geological and facies model, well operation, seismic inversion, fluid substitution modelling, porosity estimation, AVO analysis.

Well Service / Wireline / Snubbing / Workover Supervisor

Over 18 years of combine experience in Oil and Gas mostly in Engineering Design projects from FEED to Detailed design for Offshore and Onshore projects, Subsea structures, Structural Piping design, Mechanical, Electrical and Civil work, and other similar structures and equipment details, assemblies

Field & office design, using PDS program, review drawing before send to approved

Procurement Buyer – at Snamprogetti Romania a company of Saipem Responsibilities: - responsible for the process of Liquidated Damages

Senior workover & completion operations supervisor with 7 years experience in HPHT oil wells in different workover activates, gained master degree in petroleum technology, BSc degree in Petroleum Engineering & recently warded IWCF certificate drilling supervisor level.

SUMMARY OF EXPERIENCE Eleven (10) years of very sound technical proficiency as a “Sr. Piping Designer / Draftsman”in the Oil & Gas Field, Petrochemicals Refineries, Piping, Tank farm Area’s, Platform Piping, Jacket Piping, Pipe Racks & Process Equipments, Cross Country Pipelines including pumping s

Hands on experience on High Pressure Mobile Hydraulic Systems (Closed Loop & Open Loop Systems), which includes Variable & Fixed Displacement Hydraulic Pumps & Motors, Various types of Hydraulic Valves, Proportional Valves, and Electro Hydraulic Actuators, Hydraulic Cylinders.

Diploma in Electronics And Telecommunication Engineering. 18 years experiance in instrumentation field ,specially caliberating ,servicing ,repairing electronics instruments

Specialist in QA/QC-E&I, having more than 17 years experience in large size Electrical and Instrumentation construction works

Bachelor of Engineering (B.E) ¨C Electrical and Electronics (1996 to 2000), with 72% at Bharathiyar University, Coimbatore, Tamil Nadu, India.Master of Business Administration(MBA) ¨C Annamalai University,Chidambaram, Tamil Nadu, India.

Experience in Design and engineering of Pressure Vessels, Heat Exchangers, Columns, Reactors, Storage Tanks as per National and International Codes like ASME Section VIII Div. 1 / Div. 2, TEMA, API 650/620, API 660, API 661, WRC ,UBC, IS 875, IS 1893, ASCE, IBR and etc.

Project Controls Estimator

Power Industry Plant Manager - Over 35 years of progressively diverse experience encompassing electric utility generation operation and maintenance, reliability improvement and facility management

i have worked with many multi national firms.I want to obtain a position of Plant manager/Maintenance manager/Service manager in your company. I have done courses under shell company Safety awareness. Incident and injury free. Defensive driving. Safety induction.

35+ years as Drilling Engineer, Drilling Supervisor, and Drilling Superintendent

Project Engineering, Construction, Contracts, Commissioning, Start Up.

Piping DEsign Engineer with 13 years of experience in the field of refinery, petrochemicals, fertilizers. Experience in layouts, materials, stress analysis. Presently working with KNPC, Shuaiba Refinery, Kuwait

Technical Professional with over 20 years global experience in Petroleum Engineering, Intervention Services, Project management, On-site Supervision, Proposal and Report preparation, Contract preparation and Administration.

A hardworking and highly competent Electrical Engineer

A petroleum geologist proficient in interpreting and integrating well logs, core analysis data, petrology, 2D and 3D seismic, well test and production data to develop prospects and drilling opportunities leading to the economic production of hydrocarbon.

QA design and Quality Control including conduct of coordination and various inspection activities on mechanical packages in UK, Europe, USA, Middle East and Far East. Computer system / procurement activities.

My objective is to start a new career in Indonesia that would allow me to expand on my twelve years of sales, marketing and contract experience in the service sector for the Indonesian Oil, Gas and Geothermal business after retiring from Schlumberger.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out