Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #80846 next resume »»
CONTACT INFORMATION:
View contact information...

Employer: Halliburton Energy Services (Kazakhstan)

Date: 1st November 06______ Present

Position: Service Team Leader

Duties: Carry out & oversee that all preparation & maintenance of cementing equipment & down hole tools are properly prepared for all upcoming jobs: That all paperwork is carried out efficiently & reports of all records are kept. Maintain contact with Co Reps
Advise operators & trainees with there on site cementing training, assist them with their calculations

Employer: Addax/ Genel Energi

Date: 8th April 06 13th August 06

Position: Cementing Engineer Consultant

Duties: New start up project in the TAQ TAQ field Kurdistan (Iraq) using BJ cement equipment and downhole tools used in all cementing and remedial operations, Planning and implementation of site equipment for successful operations Ordering of chemicals and setting up maintenance schedules of all cementing equipment and proper functioning of all equipment

Employer: Halliburton Energy Services, Denmark

Date: 1st November 05___ 30th March 06

Position: Senior Service Supervisor III

Duties: Cementing and tool operations for Maersk Olie & Gas onboard Rowan Gorilla 7 Jackup operation of Halliburton down hole tools and maintaining & operating
Dowell cementing unit (Slurry Chief) with CEMCAT

Employer: Halliburton Energy Services, Saudi Arabia

Date: 1st January 2002___26th October 2005

Position: Senior Service Supervisor II

Duties: Supervise & implement-cementing operations in Saudi Arabia performed by Saudi
Nationals and multi national operators/the running and operation of
All cementing down hole tools i.e. (ESICP, MISCP, MCCP) DV Tools
Both onshore and offshore
Operating RTTS, EZSV, SSCV, CHAMP PACKERS, and other associated special
Down hole tools for offshore and onshore operations.

Position: Unemployed:

Duties: Seeking employment:

Date: August 1999 - January 2002

(Seasonal Painting and Decorating for local contractor)

Employer: MC2: Stirling University Business Compound

Date: May 1999 - July 199

Duties: Cold call business's, on behalf of Edinburgh local authority, for their year 2000
With regards to computer systems and ensuring they were Y2K compliant. Present to
Them, local authority compliance schedule & to forward reports of, these meetings.

Employer: Halliburton Energy Services, Nigeria

Date: April 1995___30th April 1999

Position: Tools man/Trainee Drill Stem Test Operator/Cementer supervisor

Duties: Multi skilled, including down hole tools operation and repairs, onsite & in workshop
Liase between oil company field managers. Maintaining ongoing well programs
Distribution and planning of equipment and spares for customers well sites.
Liase and dealing with problems with local village chiefs and their elders.

Employer: Halliburton Energy Services, India

Date: August 1993-April 1995

Position: Cementing /Supervisor

Duties: Implementing training to trainee Indian national engineers on all aspects of cementing
Techniques used in oil well applications Operating & maintenance of all cementing equipment. Present schematics & calculations for upcoming jobs.

Employer: Halliburton Energy Services, Aberdeen

Dates: January 1991 - August 1993

Position: Cementing Engineer

Duties: Carry out all cementing and down-hole tool operations for oil well companies,
On jackups, semi's & platforms (offshore) EZSV:RTTS:SSCV:Champ Packers and
RBP

Employer: BION Industrial Painting

Dates: May 1990 - December 1990

Position: Painter

Duties: Spraying & brush-roller painting on offshore platforms to customer
Specifications & safety guidelines.

Employer: Self employed

Dates: November 1986 - May 1990

Position Painter & Decorator

Duties: Pricing of work on hand, carrying out painting & decorating services.

Employer: Halliburton Energy Services, Aberdeen

Dates: November 1985 _ November 1986

Position: Cementing Engineer

Duties: Workshop foreman, Forwarding & receiving of offshore equipment
Repairing and upkeep of records. Offshore cementing Running EZSV, RTTS, and
RBP.

Employer: Halliburton Mfr Services, Libya

Dates: June 1980 - November 1985

Position: HGV 1 Driver/ Engineer in Training

Duties: Transporting cement & pump trucks across the Libyan Desert to customers
Rig locations. Lay, out equipment, for cement jobs, carry out cement job
Run down hole tools (RTTS, EZSV& Float Equipment cementing)

Employer: HM Forces - British Army

Dates: June 1965 - January 1980

Position: L/Cpl - HGV 1 Tank Transporting

Duties: Loading & unloading of tanks. Maintenance and servicing of tractor units
And trailers and transporting tanks to designated locations.

TRAINING

Training Body: Halliburton, Dallas, Texas, USA

Dates: October 1997 Duration of course: 5 Days

Course: Special tools 2: Hydraulic Calculations for oilfield tools.

Training Body: Computeach, home study course

Dates: January 1988 - January 1989

Details: 1Year home study course achieving basic computer programming skills.

Diploma number: 8872428

Training Body: Halliburton Cementing School, Gt.Yarmouth, England

Courses: Preventative Maintenance Dates: 6th - 17th December 1982

Basic Cement Dates: 25th April - 6th May 1983

Advance Cementing Dates: 12th - 23rd September 1983

Training Body: HM Forces - British Army

Achievements: Mechanical Certificates, A1- A2, A3, B1, B2, B3.
JMQC (6 Exams)

Dates: Varied: 1965 – 1980

Survival Courses: RGIT Basic Offshore Safety Induction & Emergency Training
Validity: 08/11/09 (Including HUET & EBS)
(OPITO Approved & NOGEPA Standards) 07/11/05 to 11/11/05

European Module Including Norwegian Induction
(OLF Approved) 07/11/05 to 11/11/05

View contact information...
«« previous resume next resume »»
Search Results (Resumes 701 to 750 of 7051)Go to Search Parameters...
Brief Description
Under Ground Piping Specialist
Accomplished petroleum exploration and production manager of people and projects. Proven broad-based experience in multi-disciplinary exploitation of petroleum reserves, evaluation work in acquisition and divestitures, information technology and project management.
A Civil/Structural Engineer having 14+ years of Consultancy experience in Structural Design and Project Management for Process, Oil & Gas and Power & Energy Projects. I have good knowledge and experience of Canadian, British, Indian, American & various Process industry standards.
Control System engineer with more than 14 years of experience with Yokogawa Systems Engineering
Electrical & Instrumentation Engineer experienced in Testing & Commissioning Instruments in FPSO, Installation of Electrical services in the Power plants (Gas turbine, Hydro, Steam turbine), Commercial Buildings, MRT and Commissioning of Process Control System in Water Treatment Plant.
APPLICATION FOR THE POST OF BLASTING AND PAINTING SUPERINTENDENT
I have different skills from farming to superivor to general labor skills inthe oil and gas industary.amd also I have some sales experance
Lead Drilling Fluids Engineer / Mud Engineer / Drilling fluids specilalist/ Mud Manager/Drilling Supervisor/ Drilling Engineer
I am Mech Engg post graduate(Prodn Engg). I have experience in using CAE packages Hypermesh,Ansa and Nastran and performing static ,Normal mode and fatigue analysis
28 years experience with industrial design drafting work. Assignments have involved equipment layouts, P&ID development, material take-offs, estimating, checking and field work in addition to developing construction drawings and fabrication isometrics.
Electrical Technician with 20 years experience in the oil and gas industry.
A total of 10+ years experience in Pipe Stress Engineering and Mechanical Stress Analysis in
Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.
Application For Mechanical Inspector/Engineer
B.Tech (Mechanical Engg-5years's degree course with SAP experience in Procurement in Oil /Petroleum Refinery in India)
Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.
Petroleum Engineer with 13 years experience in the Oil and Gas Industry with solid knowledge in Geopressure analysis, Well design, MWD operations and rock properties analysis; project management skill (estimating/cost, control/scheduling); bilingual Spanish-English; APEGGA EIT# 92804 and Worldwide.
To obtain a position as Suitable position in process control Instrumentation that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.
Highly Qualified Draughtsman
Total Of 16 Years Experience In Drafting And Detailing Of Piping Drawings And Other Drawings In Compliance With The International Standards. Experience Achieved Is In Line Of The Chemical / Petrochemical / Refinery And Connected Utilities Piping Jobs.
PDMS mid-level piping designer with a specialty in PDMS DRAFT, Misc. pipe supports, equipment modeling and sloped pipe.
Production/drilling engineer hold Master from IFP; working in Workover operation
Free! Worked as a Drilling Fluids Engineer / Technical Service Coordinator for the past 13 years.
Installation, commissioning, testing & operation of transformers, Power Control Centre, Machine Control Centre Panels
M.Sc with 15 years Laboratory experience in Analytical Lab.
Electrical Engineer
Piping Engineer (PDMS)
PDMS AUtocad 3d Multisteel Civil/Structural Design Draughtsman
I have been described in previous positions as hard working; honest; reliable; a team player and a good communicator. It has been said that I excel in new challenges and I have an excellent work record.I am at present available to take up any position within the cementing or tools in a supervisory
Preparation of FEED & ITB documents (Instrumentation, Telecom & F&G)
Able to plan, organize, and implement complex design projects within prescribed time and budget. Field experience and Construction Representative on major projects. Worked and knowledge of ASME B31.3, API, and ASTM.
Piping design and checking:Cadworx, Bentley 3D, Autoplant
Piping Designer - Mechanical / Piping.
G&G and engineering data management, MS-Office applications; petroleum software and databases, industry regulations, regulatory form preparations etc.
I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.
I have had twenty years experience in the Petroleum Industry ranging from Drilling, Production, Completion, and Work-over engineering in all types and configurations of wells and drilling units/production platforms both onshore as well as offshore. I have worked in Canada, Saudi Arabia and Thailand.
20+ years in offshore engineering; including marine, structural, pipeline, and project engineering
About 25 years of Process Engineering experience including fifteen years with EPC companies in the Arabian Gulf states in the Oil & Gas industry.
Sr. Rotating Equipment Engineer with 20years experience in Turbo-compressors up to 42 MW rating of Refinery, Petrochemicals & Ammonia Plants. In depth experience in troubleshooting, maintenance/major overhauling/modifications, failure analysis, condition monitoring and vibration analysis
Backround in Electrical Engineering/Design with emphasis of Project Management, Production/Manufacturing with more than 15 years experience in Electrical Design/Construction work and familiar with Standards Procedures as well as with the Industry standards such as ANSI, API, NEC, etc
Senior Rotating Engineer
A Process Engineer with a Masters Degree in Chemical Engineering from the University of Waterloo, ON, Canada and 10+ years experience in natural gas and polymer processing industries. Specialize in process optimization, manufacturing and troubleshooting.
I have over 16 years of working experience as a QC Inspector in petroleum and petrochemical construction Industry. I have knowledge and experience as Q/C inspector in various inspection activity like raw material inspection, welding procedure / welder performance qualification,various methods of NDT
I've developed leadership qualities and a proactive attitude, all of these combined with my experience in Maintenance and Well Production Operations, supported with software and techniques on Equipment condition analysis, laser alignment, corrosion testing, boroscopic inspection and vibration analys
Mechanical engineer in Oil&Gas Feild 18 yrs Experience in Installation, maintenance, QC in Static, Rotating equipments.
Able to learn Work Process and new software with ease. Experienced in the refinery of Blueprints, Isometrics, and P&ID¡¦s, Hand Skecthes. Experienced in structural steel supports and familiar in estimating material take-offs. Trouble shooting installation of pipe and assist Engineers in the field.
PhD Petroleum Engineer (Production Technologist)
M tech stctural engineer in Civil department, i am having expeerience in oil and gas as sr engineer in civil and structural department.
Assistant Driller - Main activities and responsibilities on the rig DRILLMEC HH - 220
Project Engineer & System engineer along with detail design experience and product development expertise gained from 20+ years working for NASA.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   [ 15 ]   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com