Resume - Highly Experienced Well Site Supervisor.Underbalanced High Pressure HighTemp Dee...

Misco Jobs

Resume #80917

CONTACT INFORMATION:
View contact information...

SHELL OIL COMPANY, Pinedale WY, USA (Consultant)
Rig Supervisor – Project drilling foreman in the Green River Basin of
Pinedale Anticline. Manage & direct the on site execution of well construction from rig up to rig release. Drilling with casing operations in highly pressured & underbalanced drilling with geomechanical constraints requiring Managed Pressure Drilling (MPD) techniques incorporating the use of hydrostatically u-tube position balanced &
weighted pills to approximate ECD pressure for BHA extractions &
casing insertions. Water based and underbalanced oil base systems up to 16 PPG directionally drilled to 14,000 feet. Pad drilling surface, setting casing skidding on 6' center-center wellbore surface separation.
Typical casing/liner runs: 9-5/8" surface to +/- 4500', 7" intermediate to
+/- 9800', 4.5" production set @ +/- 14,000". Intermediate & production liners landed in Cameron unitized double-bowl well head systems. MPD
and underbalanced continuous flaring during deep directional operations with oil base mud systems necessitate continuous attention to well bore pressure management frequently requiring emergency shut-in well control procedures and annular gas evacuation. Extensive concentration on 100%
rig site compliance of HSE at all levels of any operation.
Utilizing Nabors-Loffland SCR diesel electric rigs rated to 20,000 feet with
1,000,000 lb hook loads.
Mar 2008 – Dec 2008

SOUTHWESTERN ENERGY (SEECO), Conway AR, USA (Consultant)
Rig Supervisor – Project Drilling Foreman in the Arkoma Basin of the
Fayetteville Shale. Manage & direct the on site execution of well construction coordinating with regulatory agencies from rig up to rig release. Utilized extensive directional experience and fluid migration trending projections to lower cost per foot for operator. Lowered circulation times through lost circulation zones by use of LCM pills prior to and during directional slides through projected zones. Used rig experience to teach inexperienced drilling crews safe IADC methods of operations to lower injury incident rate including tool box meeting.
Using customer supplied DeSoto super single rigs.
2007 – Mar 2008

HERE 2 STEER LLC DIRECTIONAL SERVICES, Austin TX, USA
Directional Consultant/Owner – Providing Senior Directional Drilling consulting services to Offshore & Land clients Schlumberger Drilling & Measurements, DiamondBack Directional Drilling, Halliburton Sperry Sun, Directional Plus.
Client list included: En Cana, EOG, Petro Hawk, BP, Silverstone, Whiting
Petroleum, Zinke & Trumbo, Questar, Ultra Petroleum.
2001- 2003 Rocky Mountains: Pinedale Anticline, Williston Basin, Rifle
Colorado, Peince Creek, Battlement Mesa, South Jonah, GULF OF MEXICO
2004- 2007 Central & East Texas: Barnett Shale, Cotton Valley, James Lime
Drilled two innovative Cotton Valley extended reach wells in 2007 tripling operator production.
Drilled James Lime MPD setting record extended reach for Nacogdoches Tx area.
Assist Engineering Team to develop new Rotary Steerable System (2006).
2001 – 2007

SCHLUMBERGER/ANADRILL, Youngsville, LA, USA
Drilling Services Engineer – Provide clients with optimal drilling solutions using extensive directional experience couple with computer generated torque and drag modules. Cross trained with MWD/LWD systems, including triple combination logging. Build and edit daily and finish logs. Supervision and training of new engineers. Worked extensively in Gulf of Mexico, Tuscaloosa trend high temperature wells. Clients included Apache, Chevron, Texaco, Exxon/Mobil, Stone Energy. Engineer of record running first Power Drive Rotary Steerable for Exxon on Heritage platform in California (1999).
1997 – 2001

SELF EMPLOYED DIRECTIONAL DRILLER, Vinton LA, USA
Standard horizontal wells in Austin Chalk utilizing Production While Drilling
Underbalanced Drilling Techniques. Primary client UPRC
1994 - 1997

INTERNATIONAL PAPER COMPANY, Jay ME, USA
Technical Writer – Wrote and taught operations manuals for statistical quality improvement. Instrumental in changing process control to achieve an annual cost savings of 1,000,000. Served on Medial Emergency and Hazardous
Materials Teams. Responsible for teaching OSHA mandated HSE.
1987 – 1994

N.L. COCHRAN & DEAN, Lafayette, LA, USA
Senior Directional Driller – Provide directional services to Gulf Coast clients,
Texaco, Forest Oil & Gas, Adobe, Stone Energy, Amoco.
1984 – 1987

N.L. SPERRY SUN, Dubai, United Arab Emirates
Senior Directional Driller – Conoco/DuGas operations. Drilling traditional "S"
wells from an eight well platform using standard bent sub/motor with side entry sub steering tools for kick off. Utilizing stabilizer/ rotary bottom hole assemblies to build/drop and walk to target. Relief Directional Coordinator
Aug 1983 – Mar 1984

N.L. SPERRY SUN, Jakarta, Indonesia
Senior Directional Driller - Provided standard single shot and steering tool services to Arco and Exxon. Trained foreign nationals in directional operations
May 1983 – Aug 1983

N.L. SPERRY SUN, Northern Japan
Senior Directional Driller – Team leader providing gyro kick off coupled with utilization of Russian turbo drill to achieve first field sidetrack. At request of client Japanese National Oil Company, taught directional theory and application to petroleum engineering class at rig site.
Apr 1983 – May 1983

SII SERVCO, Saudi Arabia
Directional Driller – Arab American Oil Company (ARAMCO). Based in
Ab Qake tool house, provided client with standard directional services on
6 well platform in the Safaniya field on Kuwaiti border. Supervised fishing tool operation in South Daharan field.
Oct 1982 – Apr 1983

SIII SERVCO/EMCO, Lafayette LA, USA
Directional Driller – Started as youngest directional trainee in company history (21) with a one year training program. Achieved directional driller status after 7 months. Accepted assignments in Gulf of Mexico and Rocky
Mountains. Provided standard directional services including "jetting" and whip stocking.
Aug 1979 – Oct 1982

MARINE DRILLING, Corpus Christi TX, USA
Derrickman/Driller – Served aboard Inland Barge # 7 and Bethlehem Jack
Up Storm Drill #5.
Aug 1977 – Aug 1979

BAY DRILLING CORPORATION, Houma LA, USA
Roustabout/Derrickman – General Drilling Operations and maintenance of drilling rig machinery, derrick, and drilling fluids. Able to work top and middle boards on four able derrick. Able to assist in standard derrick tear down and rebuild on long rig moves of inland barge. Used off hours to learn basic directional drilling from rig site directional driller.
1975 – Aug 1977

SUMMARY OF QUALIFICATIONS:
------------
28 years progressive well site supervisory experience. Highly competent in all phases of directional drilling.
Experienced in underbalanced drilling high pressure high temperature

OBJECTIVE:
Wellsite supervisory post, that will allow me to teach others the science and art of directional drilling

EDUCATION & CERTIFICATION:
------------
RANDY SMITH DRILLING SCHOOL, Houston TX USA
IADC Well site Supervisor Drilling, Completions, Sub Sea (2007)

K & M TECHNOLOGY ERD SCHOOL, Conway AR USA
Extended Reach Drilling (ERD) techniques including high angle drilling and tripping practices, evaluate actual vs. theoretical torque and drag and hydraulics values. Forecasting expected loads at T&D of the current and future hole sections. (2007)

SOUTHWEST REGIONAL TECHNICAL COLLEGE, Lake Charles, LA
Associate Degree – Industrial Instrumentation – (1997)
Deans List, Adapted Process Control Simulator from Analog to PLC & DCS
_________________________________________

PASSPORT
United States of America (expires August 2019)

Professional Continuing Education
Shell Exploration & Production Leadership 2008
K & M Technology ERD and TAD Schools
IADC Drilling Supervisor Certificate, surface & subsea BOP Stack (#A306901)
Schlumberger Drilling & Measurements Directional Drilling School
Schlumberger Specialist 1 LWD Systems School

US Certifications
IADC Drilling Supervisor #A306901 WellCap
H2S Hydrogen Sulfide & SCBA Fit Test
DOT Hazardous Materials Integrated Commander
DOT Hazardous Materials First Responder
TWIC HOMELAND SECURITY I.D. 2009

Safety / HSE Certifications
HUET Helicopter Underwater Escape Training 2009

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 7041)

Go to Search Parameters...

Brief Description

16 years of experience as a water treatment chemist in Power Plant.

Drilling Fluids Engineer 38 years worldwide experience both in Field and Management

Civil Structural designer with over 20 years of experience in civil, structural, industrial, petrochemical onshore and offshore projects, infrastructure, and government projects.

Civil structural engineer, 14 years experience, familiarity with structural codes and finite elments software.

Well Services, Well Interventions, Completions

PhD in Geophysics, excellant in computer ,

Detail engineering as Performer/Area Lead; Material estimation, Proposal & Man hour estimation; Bid review, Vendor/Sub-contractor document review; Development of standards, spread sheets; Coordination with work share office/Client; Field engineering Support at site

I am a Chemistry graduate with 18 years of experience with NACE certificate as Corrosion Technologist

Over seventeen years of experience in the Oil & Gas Construction

Senior Piping Engineer - Stress Analysis / Material / Layout (18 years experience)

Status Qualifications and employment history Education Foreign Languages

Working in Oman as a Instrument Engineer, I have 20 years exp in Instrumentaion and Analytical

Drilling Fluids Engineer, Experience with All types. Over 30 years in field. World wide experience, Presently working Ultra-Deepwater projects in GOM.

post Engineer Senior Inspector – Painting / Coating & Insulation BGas / NACE –CSI [I] certified Painting Inspector. Experienced Thermal / Cryogenic Insulation Inspector Ref – Contract / Direct Hire- on Day rate basis with rotational cycle. Oil & Gas, LNG projects. Client side representati

Sr. Electrical Designer with 15 yrs experiance including PDMS

Expert in PDS Fameworks, Microstation, PDMS and bentley Structural Triforma

Civil/Structural engineer with 14 years experience in oil 7 gas industry

Well Test Engineer

Senior PDMS Piping Designer/Checker

Electrical engineer with experience in oil and gas maintenance, installation, procurement, materials sales and marketing

Experience in 8 years in Mechanical seal industry, 7 years in Diesel engines and 1 year in fabrication industry

Thirty-five years of detail design / checking in the petrochemical / refinery and fertilizer engineering field. Piping work includes preparing detail design drawings, punch list during construction, material take offs, labor cost estimates, manpower estimated, developing P&ID drawings.

Having 18 years of work experience in Project Management / Constrcution / Fabrication

Instrumentation and control senior / lead engineer

Petroleum Engineer

As Specialist Professional Engineer (Training Engineer)/Mechanical Training Instructor supervisor grade C1, C2 in all aspects of Training and Development (coach and prepare learning materials, capacity and profile building, skill-transfer and counterpart training).

Prodigiously experienced and qualified Engineering Professional, with an enviable, global, 30-year background in the Oil & Gas Production and Processing (On-Shore and Off-Shore), Refining, Petrochemicals, Chemicals, Compression and Gas Turbines industries.

Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.

Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.

Total 18yr of experience in Piping FEED, Design and Detailed Engineering, Having good expousure of 3D engineering software.

Seismic data processing /reservoir simulation software developer

19 years Experience in Instrument during construction, commissioning, start-up and Maintenance in many different Oil & Gas, Refinery and Petrochemical Projects

Extensive experience on drilling as Wellsite Supervisor, Senior Well Engineer, Wells Superintendent

Project Management

Control Systems Specialist

17 years of post qualification experience in Detail Engineering of Pressure Vessels (Oversized & Shop Fabricated), Reactors, Separators, Drums, Columns, Spheres, Tanks (Storage & Low Pressure), Flare Stack, Vendor Packaged Equipments, Emergency Diesel Generator and Overhead Cranes

Instrument supervisor / foreman

Highly Experienced Well Site Supervisor.Underbalanced High Pressure HighTemp Deep Horizontals

Thirty years experience as a drilling supervisor for an major international operating company. I have an Associate degree in Petrouleum Technology. I am currently consulting in Oman on a land exploration well. I have over 20 years international experience.

25+ years experience in electrical/control system design for the petrochemical industry. Additional three years experience in civil engineering. Experience has included electrical/instrumentation design to NFPA, NEC and ISA standards, field engineering, as well as managerial experience and CAD.

Drilling fluid superintendent / supervisor ( mud, cement, waste management)

I am a knowledgeable Mechanical/Piping Designer with Project Engineering experience, capable of increasing degrees of responsibility.

I have twenty five years of piping design, 10 years of project leading with in the piping group, shop fabrication & field construction c/w PDS & AutoPlant soft wear experience. I have US work experience & posses a valid Social Security card.

Offering more than Fourteen years of Experience in Marine, Offshore, Oil & Gas Industry with a wide variety of projects involved in Electrical & Instrumentation Disciplines. Acquire extensive knowledge in a broad range of Computer programs & other Various E & I Engineering Field

Instrument / Controlsystems Engineer

Geologist geophysicist interpretation

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

To obtain a challenging position with an engineering firm where I can use my relevant skills and experienced as Interface Design Coordinator / AutoCAD Supervisor and be a contributing member in the growth of the company. Willing to work as a key player in challenges where I can put my committed atti

I am capable of achieving organisation¡¦s objectives and organic growth through effective contributions. I have over 13 years of experience in the areas of Health, Safety & Environment Management

First 1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out