Resume - Senior PDS Designer

Misco Jobs

Resume #81074

CONTACT INFORMATION:
View contact information...

Summary: Over eight years experience in 3D model design, piping design, pipe support design and document preparation for engineering and construction companies.

Employment:
Washington Division of URS Corporation: Denver, CO
Title: Piping Designer IV (03/06-Present)
* Utilizing PDS along with P&IDs and other Engineering documents to generate PDS piping and equipment models for projects such as Syncrude Emissions Reduction, Pine Bluff Chemical Demilitarization, Exxon Mobil CO2 Sales, and Tennessee Valley Authority.
* Piping systems included Low/Medium Pressure Steam, Utility Air, Instrument Air, Boiled Feed Water, Condensate, Coke Fine, Glycol, Recycled Water, Potable Water, Lime Slurry, Ash, etc.
* Responsible for extracting and check isometrics before issuing for stress and for bid.
* Utilizing Smart Plant Model Review to visually check piping model and preform model reviews.
* Run interference report and scrub piping isometric after checking.
* Created 2D Piping Orthographic and 2D General Arrangement drawings.
* Providing support for the construction site. Answering any questions that may arise (RFIs).

Walsh Engineers: San Diego, CA
Title: Piping Designer (08/05-03/06)
* Working in the Power Resources Department (PRD) to design gas generated power plant.
* Responsible for create 2D and 3D construction documents from engineer, vender drawings, and P&ID using AutoCAD 2005-2006 and AutoDesk Building Systems.
* Responsible for designing ducts and piping along with designing supports for both.
* Required to take field measurements for additions to existing plants.

Bechtel National Inc: San Francisco, CA/Richland, WA
Title: Piping Designer (11/01-06/05)
* Prepared detailed piping design and equipment modeling using P&ID's, Engineering Documents, Project standards, and Vendor Drawings. Prepared General Arrangement for the Waste Treatment Plant and the Pueblo Chemical Agent-Destruction Pilot Project using PDS, Plant Space, TriForma, MicroStation 2D/3D, and Smart Plant Model Review software.
* Design 3D pipe supports utilizing Pelican Forge Pipe Support Modeler software with information from project support details or information provided by stress and creating new pipe supports if needed.
* Responsible for extracting isometrics and checking it against P&IDs before issuing for stress and construction.
* Responsible for changes and record keeping on 3-D model of plant.

Urban Data Solutions: Tewksbury, MA. (06/00-03/01)
Title: CAD Specialist
* Utilized Architectural Engineering Series software, along with multiple resources, to complete 3-D models of various U.S. cities.
* Responsible for completing logs for model build-out.
* Required to be fully involved in the decisions making processes during the modeling process.
* Responsible for the GIS evaluation process of each completed city. This evaluation process was completed primarily through ArcView 3.2.

Education:
Washington Division of URS Corporation: Denver, CO.
* Completed SPED Process Plant Layout and Piping Design training course.
* Viewed over 66 hours of Videos along with course tests.

Middlesex Community College: Bedford, MA. (09/97-05/00)
Degree: Associate in Science with CAD technology.
* Accrued 1,500 hours of course work and lab experience using technical software on microcomputers.
* Designed, drafted, and dimensioned with ASME Y14.5-1994 Geometric
Dimensioning and Tolerance Standards for mechanical assemblies and details using AutoCAD R14/2000, and Mechanical Desktop 4.0.
* Planned and drafted electronic schematics using the PowerLogic program.

Lowell High School: Lowell, MA. (10/94-05/97)
Diploma: General Academic with drafting technology courses.

* Other skills: Familiar with Microsoft Package, some HTML skills and Fluent in Vietnamese.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 7050)

Go to Search Parameters...

Brief Description

+12 yrs as pipe inspector.api,ds1 cat of insp of bha,drillpipe,drill collars.casing & tubing.Emi drillpipe,mpi handling tools and vti/drift of casing and tubing.UT wall thickness and shearwave check slip area

MS chemical engineering from reputed university from Texas. having 3 & more years of experience in chemical /oil and gas sectors. worked as process engineer, expertise in ASPEN Hysys, pressure relief valve sizing, line sizing, hydraulic calculations,sizing of drums,heat exchangers & pump

My performance focused on electrical and instrument engineer, which contain electrical and instrument performance on control and trouble shooting, like dcs, plc, tranduser indicator and all mill transmitter valve.

Well Qualified, Skilled & Experienced proffer in Design, Consultancy, R&D in Civil, Structural, Geotechnical, Architectural and Industrial Engineering

Well servicing (Coiltubing, Wireline and Pumping Operations).

+15 yrs exp,Concept,FEED,Detail Engineering,Oil/Gas,onshore,offshore,power plants,Rotating Equipment,Pumps,Compressors,Turbines,Engines,Pressure Vessels,Tanks,Heat Exchangers,Chemical Injection,Instrument Air,Fire Protection,Cranes,Equipment Selection,Specification,Data Sheets,TBE,Vendor Data Review

Refinery operation, technical service to hydrocracker/hydrogen/sulphur recovery unit, commissioning of hydrocracker/hydrogen/effluent treatment plant

16 years of Piping & Pipelines Projects execution experience in the Industries Refinery, Hydrocarbon and Oil & Gas (Project piping, pipelines, Tanks, structurals, equipments). Knowledge of ASME Sections, ANSI, API & DIN codes /Standards.

Pipeline Integrity Engineer with Metallurgical & Material Engineering background, extensive experiences in the oil/gas both Offshore and Onshore (and swamp) pipelines.

FEA ENGINEER-ANSYS,HYPERMESH,ABAQUS

Masters in Electrical Engineering. Four year experienced. Skills: MATLAB, PLC Programming, Simulation,HSPICE,MULTISIM, Assembly Language, AutoCAD, Visual Basic, C/C++, Operating Systems

Sr. Structural Engineer-Ports, Marine & Offshore 8 years experienced, with knowledge of SACS, StaadPro, SAP

Mechanical Engineer with over 16 years experience within the hydrocarbons onshore & offshore, mineral processing and manufacturing industries. Degree & trade qualified experience includes, engineering design, construction, shutdowns, commissioning and maintenance. Over 10 years of on-site constru

BE Electronics, Experience in Project erection & Commissioning of Electrical & Instrumentation, Procurement of Elec & Inst. Materials

Diploma in Electrical Engineer. AutoCAD. Word. Excel. Windows.

Sr.Mechanical Engineer having 16 yrs of Experience in Petrochemical, Oil&Gas field

Experienced Engineer with 15+ years of on job experience. Conversant with ISO ,international standards and Oil and Gas industry requirements. Can lead a team of inspectors .Has worked in Saudi Arabia, Yemen, UAE and Kazakhstan. Largest contract Value 1.3 Billion USD.

Being a petroleum engineer and having many years of experiences on middle eastern countries ( OMAN,UNITED ARAB EMIRATES, QATAR, IRAN...) could merit for any advertised jobs.

OBJECTIVE My goal is use my chemical and process engineering knowledge in a position as a Process Engineer or simulation engineer in the Refining Industry. Also I would be interested in using my knowledge in Logistics in any Industry

Five Years (1/2003 : Until now ) as HSE Engineer, Supporting Health, Safety, Environmental Protection, Fire security and Training Requirements Relating to the Full Range for Offshore and Onshore Construction and Operational Activities of Oil and Gas Industry in Petroleum Company.

Reservoir and Production Engineer

Senior Mechanical / Piping / Materials Handling / Pneumatic Design Specialist, Checker, Design Supervisor, Project Manager or Consultant

Piping Layout,Equipment Layout,Nozzle Orientation,Vendor Drawing commenting,PDS,Microstation,GAD Extraction,Isometric extraction,Piping & Rack StudyClash resolving,Smart Plant Review

MORE THAN 5 YEARS EXP AS A SAFETY OFFICER IN OIL & GAS CONSTRUCRTION PROJECTS BOTH IN ONSHORE & OFFSHORE

11 years of NDT experience in the Middle East

Instrument Design Engineer; Instrument Site Supervisor c. PMT Instrument Field Engineer

Sizing process systems, Conceptual Design on projects : carrying out engineering studies at initiation, feasibility studies & concept selection,Process simulation & datasheet preparation ,Knowledge of Design Reviews and HAZOP studies,Preparation of PFD’s and P & ID’s,(B.Tech in Chemical Engineering)

CSWIP 3.1 certificate # 25917/2 ,TWI, U.K

I have nearly 5.5 years experience in piping material engineering pertaining to petrochemical projects with renowned EPC contractors. During this time I have been responsible for various piping material related activities like piping class preparation, TBE, vendor drawing review.

qa/qc inspector (welding or piping inspector)

wireline specialist and downhole gauges engineer

Chartered electrical engineer experienced in Instruemntation filed. Trained in QMS ISO Lead auditor course.

Mech Engineer, 10 years EPC experience in packages for oil & gas; gas dehydration, stabilization, water, effluent, pumps, utility equipment

Safety Officer with more than eight years of experience and presently working in Saudi Arabia with Saudi ARAMCO projects.

Facility Engineer for oil and gas

Graduate in Electrical Engineering, with 14 year experience, of which 6 years in Refinery/Gas plant. Familiar with all maintenance & construction activities.

Very good exposure to conceptualisation, business developement, sales, erection, installation, commissioning and O&M of Lean burn Gasengines/ Diesel engines

Senior PDS Designer

Master in Chemical Engineering, 3 year experience as mud engineer

Highly competent, result oriented Drilling Engineer with three years of extensive experience in drilling optimization of horizontal, directional and extended reach wells. Demonstrated skill as a successful team leader and team player. Masters in Petroleum Engineering from University of Oklahoma.

Canadian Sr. Control Systems Engineer (process control). PLC/DCS programming. I &C Design.

Exploration Geophysicist

Mechanical Engineer - Static Equipment (Design & Detailed Engineering of Pressure Vessels, Columns, Column Internals, Heat Exchangers & Storage Tanks based on various Design Codes & Standards.)

Piping designer /supervisor , PDS designer

Instrument and Control Engineer

More than 11.10 (8.10 years in Saudi Arabia, 5 months in Qatar, 1.7 years in Abu Dhabi UAE & 1 year in India) years of extensive experience in Quality Assurance and Quality Control in Oil, Gas & Petrochemical Projects, Acetic Acid Project, Ammonia Urea Expansion Project and Power Plants involving En

B Tech Degree in Mechanical engineering with 6+ years experience as a Production Planning and Material engineer in manufacturing of Oilfield equipments, Pressure Boilers, Process plants.

Searching for a challenging job in the field of PetroChemical engineering. Expert in MS Office and other computer operations.

6 years of experience in oil reservoir management. Development & monitoring low quality multilayered reservoirs. Preparing development plan, production forecast & the budget. DST, hydraulic fracture & acidizing operations supervision. Water flooding designing, operations & surveillance.

Instrument Design engineer having 6+ yrs of experience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out