Resume - A Professional Engineer with over 18 years' experiences in Process Control Syste...

Misco Jobs

Resume #81109

CONTACT INFORMATION:
View contact information...

PROFILE

A Professional Engineer with over 18 years' experiences in Process Control Systems for the design, development & implementation of process control applications, oil storage, movement & blending applications and process training simulations. Extensive knowledge in Honeywell Distributed Control Systems' (DCS) Hardware & Software: -TDC 3000/TPS system and CL programming languages for process control applications. Have extensive knowledge in Petroleum Engineering, Statistics, Optimization, Adaptive Control and Non-linear Control Algorithms as well as in process. Also have over 2 years' experiences on real-time and simulated control systems in academic environment.

PROFESSIONAL EXPERIENCE

2001 – Present LEAD ENGINEER, TECHNICAL DEPARTMENT, QATAR PETROLEUM REFINERY, STATE OF QATAR

* Responsible for Refinery Expansion Project consist of Honeywell APC (Advanced Process Control) systems and Lead Engineer work closely with vendor for configuration, implementation & commissioning of the APC systems as well as reviewing functional design & conducting acceptance test and providing user training to operation personnel.
* Study and modify the basic operational philosophies like intermediate stream blending for each product, designated product and intermediate storage tanks, product specifications, availability of instrumentation, operational flexibility of product transfer lines/unit rundowns etc for improvement in view of OM&S applications implementation.
* Coordinate with Field instrument team to attend the unhealthy instruments like FICs, MOVs, and tank gauging instruments etc for maintaining the online factor of APC applications.
* Work closely with end users (Operation & Production Planning) to make sure APC & OM&S applications such as RMPCT, Tanks Monitoring, Movements, Blend Control & Optimization packages are continually available on-line, fully utilized and provide day-to-day support on these applications to fulfill operational requirements.
* Change and improve models in existing applications after implementation, to sustain increased Refinery margins.

1999 – 2000 SR. PROJECT ENGINEER, GLOBAL SERVICES-REFINERY, ASPENTECH CANADA LTD., CALGARY, ALBERTA, CANADA

* Responsible for project related tasks including determining scope of the required system, estimating cost & schedule, the functional & detail design, configuration, implementation and commissioning of order management for blending and oil movement (Pro-Blend, Pro-Move) applications.

1995 - 1999 SR. APPLICATION ENGINEER, REGIONAL APPLICATION CENTRE, HONEYWELL LIMITED (CANADA), TORONTO, ONTARIO, CANADA

Software Applications - Project:
* Responsible for the preparation of the project specification documentation, implementation & commission of OM&S and in-line blending applications, also provide training to the client, [i.e. SDM - Storage Data Management, BRC - Blend Ratio Control, BPC - Blend Property Control (Optimization package uses MINOS1), ODM - Offsite Database Management (uses ORACLE RDBMS)].
* Prepared number of project specification documents and successfully designed and implemented number of customized SDM applications for client, i.e.
- Volume calculation of H2 & Natural Gas using Redlich- Kwong equation of state
- Sorting & Generating Tank Farm Inventory Log Report, etc.

* Successfully designed and implemented number of customized BRC & BPC applications for client:
- A single destination tank sharing by two blenders.
- Proto Octane lab data downloaded (transferred) to the BRC (i.e. into analyzer proto values).
- Lab property values from SDM tank uploaded (transferred) to the BPC blend values.
- Custom alarming for each property when calculated property giveaway exceeds a configured tolerance.
* Successfully implemented number of standard BRC, BPC & ODM applications for clients.
* Successfully designed and implemented Interlock logic for High level control and back flow isolation valve control for an in-line blending.

Hardware Systems:
* Responsible for staging/upgrading the TPS/LCN systems for every project which include setting up and installing TPS/LCN software for Global User Station (GUS), Application Processing Platform (APP), Application Module (AM), Process Manager family (HPM, APM, PM, SM, LM), Computer Module (CM), PLCG & History Module (HM) etc. Formatting, initializing & Installing HM disk drive. Network (NCF) configuration & installation of TPS/LCN systems for every project. Formatting & partitioning PC hard drive, installing Windows NT and PC network configuration using TCP/IP for GUS & APP node. Also responsible for ordering new hardware, maintaining and troubleshooting of the hardware configurations.

1991 - 1994 ADVANCED CONTROL SYSTEMS, UPGRADING LINE SUPPORT,
SYNCRUDE CANADA LTD. FORT MCMURRAY, ALBERTA, CANADA.

1993 - 1994 CONTROL / SIMULATION ENGINEER

On-Line/Main Control Systems:
* Successfully designed and implemented a Furnace Combustion (Cross Limit) Control on a Coker unit
* Designed and implemented successfully a multivariable Reactor Weighted Average Bed Temperature control application using an Optimization package MINOS1 on a Gas Oil Hydrotreater.
* Justified and implemented an alarm management control strategies on various Plants.

Process Training Simulations:
* Developed and implemented Gas Oil Hydrotreater reactor furnace and fractionator reboiler simulations model using IDSP2. Implemented control loops and schematics for the furnace and reboiler.

1991 - 1993 APPLICATION ENGINEER

On-Line/Main Control Systems:
* Successfully implemented an alternate reactor pressure control, a fractionator overhead temperature control and a low pressure steam generator's level control applications on a LC Finer process.
* Designed and implemented a Boiler Feed Water Decoupling control application and a furnace feedforward firing control application on a Gas Oil Hydrotreater. Justified and designed a control strategy on a LC Finer reactor temperature control when add new catalyst & remove used catalyst.

RESPONSIBILITIES INCLUDED:

On-Line/Main Control Systems:
* The integrity, security, design, implementation, and maintenance of process control applications.
* The identification, justification and implementation of new process control schemes to improve process unit performance through analysis of unit operation, control problems and soliciting of operation.
* Provide effective training for the process operators and technical contacts on the use of control applications to safely control all operational aspects. The technical supports for all process control troubleshooting/concerns/inquiries and Database management.

Process Training Simulations:

Maintenance:
* Implementation of software changes that have been completed on the Main System.
* Minor changes to existing Plant models; includes both Plant changes and new requirements for Training.
Development:
* Major Plant model changes & new Plant models and building new control loops.
* Migration of the Main System's applications to the Training Simulations. Loop tuning, points and schematics building.

1988 - 1990 RESEARCH/TEACHING ASSISTANT, THE UNIVERSITY OF WESTERN
ONTARIO, LONDON, ONTARIO, CANADA.

* Research focused on adaptive control & Non-linear control algorithms and use of statistical techniques as an empirical method of model design and parameters estimation. Both real-time and simulated control systems have been examined. Implemented and tested an experimental batch reactor temperature control system on Non-linear and adaptive control algorithms.
* Tutored/demonstrated students in process control, unit operations and provided assistance to students in programming. Supervised a 4th year real-time systems' advance process control course.

Duties included:
* Consultation with students during workshops advising them in interfacing real-time systems and tuning real time systems. Reviewing and signing all detailed calculation and reports.
* Evaluating performance of the students based on characteristic such as punctuality, technical knowledge, communication skills and resourcefulness.

1987 - 1988 ENGINEERING ASSISTANT, GEOCHEM LABORATORIES LTD.
CALGARY, ALBERTA, CANADA.

* Single well tracer testing analysis.
* Operating gas chromatograph for liquid samples.
* Preparation of core and cutting samples.
* Treatment of organic materials present on core and cutting samples.
* Carbon determination of core and cutting samples.

EDUCATION

1988 - 1990 M.Sc. in Chemical Engineering, Specialization: Process Control, The University of Western Ontario, London, Ontario, Canada.
Thesis Title: Experimental Testing and Evaluation of Adaptive and Non-linear Control Algorithms.
1983 - 1987 B.Sc. in Petroleum Engineering, Montana College of Mineral Science and Technology, Butte, Montana, U.S.A.
Areas of concentration included the core program, Petroleum Operation Design & Production and Reservoir Simulation & Modeling.

COMPUTER SKILLS

* In depth knowledge of real-time control systems including HONEYWELL TDC 3000 & TPS systems.
* Extensive experience with various operating systems (HP-UNIX, MS-DOS, DEC ALPHA & VAX 4000, VAX/VMS, HONEYWELL TDC 3000 & TPS).
* Real-time programming in TDC 3000 environment (APP, HPM, etc.)
* Strong background in FORTRAN, PASCAL, C++, VISUAL BASIC, IMSL (Statistical and Mathematical subroutines package); ORACLE 7 - RDBMS, SQL*PLUS, PL/SQL, FORMS; MINOS1 (Modular Incore Optimization System); IDSP2 (EXXON's Interactive Dynamic Simulation Package); Honeywell OTS; HYSIM (Hyprotech's Process Simulation Package); MATLAB (high performance software package for scientific & engineering numeric computation); PI (Oil Systems' Plant wide Process Information); MS Windows & Office, Networking using TCP/IP.
* Other skills: Problem solving and troubleshooting skills.

PROFESSIONAL AFFILIATIONS
* The Association of Professional Engineers, Geologists and Geophysicists of Alberta (APEGGA).

Nationality: Canadian

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 7040)

Go to Search Parameters...

Brief Description

MS in Petroleum Engineering, 20+ Years experience as Reservoir Engineer. Skilled in Reservoir simulation, Field Development Plans and Well & Reservoir Management.

Sailed for lasat 18 years on board Chemical, petroleum, OBO and Bulk carriers. Extensive experience on drydocking and repair yard. Completed conversion of a ship to FSO at Keppel Shipyard.

I have 18 years experience in Oil & Gas Industry.Experience in completion execution: Completion activity and workover operation, Well Testing (Oil / Gas), Gravel Pack, Gas Lift, Submersible Pumps, Perforating Technique, Well Stimulation (Acid / Frac), Cement Squeeze Operation.

Well-developed interpersonal skills.

Senior Process and flow assurance engineer with full project cycle experience.

I am a licensed Canadian engineer with M.Sc. degree and 28 years experience in Instrumentation & Control Systems (DCS&PLC) design, instruments specification (InTools), purchasing, commissioning, start-ups, maintenance, and training. In past twelve years I worked with major EPC offices in Calgary

Piping Stress Oil/Gas, Off/Onshore, FPSO's and Nuclear - Caesar,Autopipe and PSA5

I am Petroleum Geologist with +20 years experience in subsurface projects. These experiences cover mostly production geology, drilling operations and a few exploration projects. I was also involved in heavy oil projects, including drilling operations, well geostering and geocelular 3D geologic model

Experience 14 years in Refineries (Fuels & Lube) as a Process Engineer to Technical Services Manager in India. 9 years in KNPC as a Process Design Engineer, in Project Department, implemented minor and major projects in 3 Refineries. 3 years in EPC Company, Canada, Designed SAGD utilities and SRU.

Over 30 years experience in Oil and Gas Petrochemical Industries onshore and offshore in the UK and overseas. Experience gained on various onshore projects, i.e. Power Plants, Chemical Plants, Pumping Stations, Alumina Plant, and Petrochemical Refineries ;BSc Mech. Eng..

Free! I am an International Sr. Well Engineer with a wealth of worldwide experience and knowledge. I have a Petroleum Engineering degree and 27 years in the industry. I want to continue to contribute to the technological challenges of the energy arena, particularly offshore, subsea and deepwater.

Over 25 years of international oil/gas industry experience as a professional Geologist, I worked on Africa, Middle East, Canada, North Sea, India, Kazakhstan, Trinidad & others. Proven track record in geological exploration & development venues: prospect generation, new ventures andplay fairway

Drilling exploration production, per cv below

B.E. (Mechanical) - 1980

Petroleum Engineer with 26 years of professional experience mostly in Production Engineering. Spanish and English fluent speaker. Artificial lift, workover and well service recommendations. Well Completion programs. Well testing. Field Evaluation and Production Optimization.

30 + year mud engineer, experienced in all phases of drilling fluids & BOP.

I have more than 17 years experience in exploration and development domains. During my career, I have explored for hydrocarbon in the Algeria sedimentary basins. North Sea Norwegian sector, Libya and now I`m working in Canada for Fugro-jason.

23 YEARS EXPERIENCE IN PETROCHEMICALS -PROJECT , OPERATIONS ,ERECTION ,COMMISSIONING

Seasoned and versatile process engineer (Oil & Gas, Refining) seeking a Process Engineering position that utilizes my analytical and communication skills to enhance organizational growth and profitability.

Project management, Coordination with End User/ Vendors/Contractors/Consultants, Progress monitoring& reporting, Supervision, Quality/Safety assurance and Tender documents

Professional API 510 and AWS CWI Inspector

With thirty years experience in the workforce in industries such as oil & gas, mining, fabrication/construction, and marine engineering, I have a very strong mechanical aptitude in all disciplines and a strong commitment for OHSE having started with my apprenticeship as a Mechanical fitter/1st class

Petrophysicist

Over 15 years of experience in Instrumentation Engineering, Procurement, Construction, pre-Commissioning and commissioning of projects

Highly skilled and experienced Sr. Drilling Engineer, experience with land/offshore (including deepwater), having worked as Drlg Engineer through Drilling Engineering Supervisor for a large scale GoM deepwater developement project.

20 years experience in drilling/work

Engineering design, offshore and onshore pipelines and facilities, Report writing DBM, FEED, PEP

Production chemist involved in oil & gas flow assurance, development and validation analytical operating procedures, reliability plant engineering

B.E.(Mechanical); 22 Years total Industry Experience; Served with SABIC, Reliance, SPIC & Shell;

More than twenty (20) years experience in the field of Engineering Construction in

A professional, well-qualified MECHANICAL ENGINEER with extensive project management experience in the oil refining, gas, LNG/LPG, petrochemical and associated industries.

Senior Plant Inspection Engineer. Mechanical engineering graduate with 29 years of experience in Oil/ Petrochemical industries loking after Process Plant Inspection, Materials Inspection, NDT, Corrosion, Failure Analysis, Fabrication/ Welding inspection in running plants + new grass root projects.

Geologist, Heavy Oil and Oilsands. Experienced consultant, prospect generator, horizontal well planner for thermal and CHOPS applications.

I have 22 Years of experience in the Detailed Design and Engineering in the areas of Plant Design & Piping for Oil & Gas, Petrochemical, Chemical and Power Projects. I am presently working as a Head Piping.

With 20years O&G experience, my main experience has been on major projects during design. I have experience within Operations, Construction and Commissioning and also worked on site; offshore, pipeline construction and FPSO shipyard construction. I have Australian and British Citizenship.

Dedicated professional in Exploration and Production with 27 years experience working for the two largest major Oil Services Companies. Strong engineering background in Drilling and Completion Fluids as well as Drilling Waste Management through years of focused operational management.. Strong engi

Drafter & Designer experience in estimation and designing of transmission lines and poles. Facilitated department meetings for administration of projects. Have worked the industry for twenty-five years and have obtained a Bachelors of Science degree in, Business Administration. Ability to prioritize

Profile: A Specialist Seismic Interpreter with over 15 years experience in Oil & Gas exploration, in seismic interpretation and prospect generation. Having the ability to supervise seismic processing and acquisition activities and take on role as a Project Manager. Confident in ability to cont

Working with Transocean as a Drilling Manager in Integrated services Project started for 5 Jack up rig for Bombay High field with client -ONGC. Operation commence in Jan 2007.

Drilling Engineer offshore tender rigs jackups onshore land rigs

process engineer

a senior instrument & Controls engineer

Sr Piping Designer Oil & Gas 3D model

Senior Planner with more than 20 years experience in Oil & Petrocehmical Industries

Qualified professional Project Manager and licensed US chemical engineer, with 32 years oil and gas and refined products production and processing facilities, pipelines, stations and terminals.

Piping Engineer/Designer

Presently working as Drilling Manager with Transocean started up the project in India for 5 Jackup rig for ONGC along with Tony Flynn who was than our GM -Integrated services in May 2006. Direct responsibility is managing T12 and JTA ( 300' Jackup)on day to day coordination, planning and execution

AutoCAD drafting, Drawing, Painting (Acrylic, Oil, Water Color), Airbrushing, Faux Finishing, Murals, and Computer Graphics /Illustrations. Software: Adobe Illustrator, Adobe Photoshop, Adobe Streamline, Adobe 3D, Flash, Fractal Painter, Quark Xpress, Microsoft Word, Power Point and various scanning

Instrumentation, Control and Safety Systems Design Engineering - Projects

A Professional Engineer with over 18 years' experiences in Process Control Systems for the design, development & implementation of process control applications, oil storage, movement & blending applications and process training simulations. Extensive knowledge in Honeywell Distributed Control System

First 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out