Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #81281 next resume »»
CONTACT INFORMATION:
View contact information...

Place, date of birth: Brebes, May 9th. 1976
Religion: Moslem
Sex, status: Male, Married

SUMMARY OF QUALIFICATION

A. QUALIFICATION
-Graduated from Diploma I Chemistry-Chemical Analyst High School in Bandung, West of Java.
-Fluent in English both oral and written;
-Computer literate (Microsoft Offices: Excel, Word, Power Point, etc.);
-Familiar with e-mail utilization;

B. EXPERIENCE
-13.5 years working experience in Petrochemical (Polymer) industry located in Cilegon, Banten since 1995 until now. For detail 6 years working experience in Quality Assurance section as Senior Laboratory Technician, 3 years working experience and support in Mitsubishi Logistic Indonesia (Polymer products export to Japan) as Assistant Supervisor, and 4.5 years working experiences as Assistant Supervisor or Chemist in Marketing Technical Service (MTS) same as Research and Development section.
-Familiar with Laboratory works and R-D activities;
-Can work with less supervision and able to work under pressure;
-Familiar with general safety activities.
-Able to work independently or as a part of team in difference culture

C. ABILITIES
-Good knowing in handling, maintaining and calibration of analytical instrument such as: Gas Chromatography (GC-Shimadzu; GC-14B, and Agilent type), High Performance Liquid Chromatography (HPLC- Agilent 1100 series), Atomic Absorption Spectrophotometer (AAS), UV-Visible Spectrophotometer, Moisture Meter CA-06; Vaporizer VA-06, Automatic Titration GT-06, XRF, and Inductively Coupled Plasma Spectrophotometer (ICPS), Ion Chromatography system (ICS- Dionex 2000).
-Familiar in Polymer analysis with Different Scanning Colorimeter-Thermal analysis (Melt temperature, Crystal 1 & 2 temperature), Intrinsic Viscosity meter, Density instrument, Refracto-meter, FT-IR, and Color Difference Meter.
-Conducting general analysis from raw material samples, process samples, product samples, customer complaint samples, water treatment analysis, environmental monitoring, and R-D samples.
-Good application and understanding about warehouse management for gas-reagent inventory, apparatus stock, material, waste disposal, product warehouse management, export material preparation, raw material receiving, etc.
-Good understanding in data processing, charts, and statistical data (R & D methods)
-Familiar with the implementation of MSDS (Material Safety Data Sheet) relation government rules, Safety patrol, potential risk, countermeasure, and preventive action for some incident.
-Good knowing general safety treatment, emergency response, fist aids, fire fighting theory and practice; base standard in SOS methods.
-Good understanding in the implementation research and Development (Quality of Control Circle); planning, actuating, evaluating, reporting, innovating,
-Have basic knowledge of ISO 9000-2000, Responsible Care, LIMS, ASTM, JIS, OHSAS and ISO 14000

Experience job practice
I'm already gets experience job practice during Chemical of High School in National Atomic Energy Agency [Badan Tenaga Atom Nasional (BATAN)] Bandung, West of Java.

Formal education
1991-1995 Diploma I Chemistry-Chemical Analyst High School in Bandung, West of Java
-Major in Chemical Analysis.
1988–1991 Junior High School, Brebes, Center of Java

Training activities
-TPA-Polymer Facility Operation (Mr. Takahashi Isao, Mr. Hayakawa, and Mr. Miyake from MCC Japan)
-Chemical Emergency Response in Laboratory -LIPI Bandung
-Material Safety Data Sheet [MSDS]-LIPI Bandung
-GC Maintenance & Troubleshooting, PT. BERCA-Jakarta
-Validation Data for Chemical Analysis- LIPI Bandung
-Safety activity and procedure in Laboratory and Warehouse
-Gemba Kaizen, 5-S, and Hatto Hiyari
-Quality Control Circle [QCC]
-ISO-9000, 9001, OHSAS, and ISO-14000
-Calibration and Maintenance for Laboratory Instruments (AAS, ICPS, HPLC, GC, ICS, FTIR, etc)
-Outing Team Awareness Program -UI-Anyer
-First Aids Theory and Practice, Fire Institute, Jakarta.
-General Safety Module 1-4
-Fire Fighting Theory and Practice, PT. Krakatau Steel, Cilegon
-HPLC statistical data and analysis - LIPI Bandung

Internal Technical Conference (MCC India, MCC China, and MCC Indonesia)
Already get special experience about presentation of Polymer Facility Operation in Internal Technical Conference with attended by delegation from MCC India and MCC China, Factory General Manager of MCC Indonesia, all Division Manager and all Section Manager of MCC Indonesia.

Motivation and Spirit:
For good life and happy life need skills and experiences. Now works with good skills and high discipline but still not balance with salary. So if joint with new company, I hope get better life and very happy life with good salary and compensation. 'We cannot change yesterday. We can only make the most of today, and look with hope toward tomorrow.'

Other Skills
2002-1st Winner of QCC convention
2007-2nd Winner Fire Extinguisher contest
2008-2nd Winner Fire Extinguisher contest
-Public speaking Trainer (MC, Presenter, Orator, etc)
-Spiritual and Motivation Trainer
-Journalistic Trainer
-Event Organizer Trainer

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1101 to 1150 of 6985)Go to Search Parameters...
Brief Description
Instrumentation ICSS commissioning specialist
Sr. Designer with Autocad,Microstation, PDMS,AutoPlant, SmartPlant
14 years in Details engineering, Control system, Construction, Operation and Maintenance works of Electrical and Instrumentation in EPC projects Oil & Gas, Hydrocarbon, Petrochemical, Refineries
Sr. Java developer
Have B.Sc. degree (2:1 upper division) in Geology, and 11.5 years (1998 – 2009) working experience with Shell E&P (Netherlands and Nigeria) as senior Geologist and subsurface team leader. Very skilled in static modelling using Petrel, HCIIP volumetric computations, Field development planning
Senior Piping Designer/Field Coordinator/PDMS and PDS Designer
General Analysis of Petrochemical, raw materials, process, products, customer complaint. Expert in several Lab instruments as AAS, ICPS, ICS, DSC, HPLC, GC, etc.
31 Yrs. Of Experience i Rotating Equipment Maitenance /Conditio Monitoring
I have high energy level and eager to learn new skills ,I am very organized person and in my entire job I have organized my activity and other people activity.I can take responsibilities ,I am a customer focused and I have always met my deadlines.
Solid experience in Project Management and Project Control of Oil and Gas Projects.
■ Quality-driven professional with over 25 years of experience■ Verifiable track record for successful completion of projects in EUROPA ,SOUTH- AFRICA.RUSSIA and QATAR. ■ Business oriented; able to understand and execute broad corporate policy. ■ Implementatio
Senior Reservoir Engineer with 20 years experience in Reservoir Simulation and reservoir management. Very good experience in Well Test Analysis, reserve estimates, material balance and enhanced oil recovery schemes.
I am a Civil Engineer w/ 28 yrs experience in oil & gas, infrastructure and gen. const
I have been working for the past 22 years in project controls / planning, construction and maintenance disciplines in Oil & Gas, LNG, Fertilisers, Petrochemicals, Power and Refinery. I have a good knowledge of International Standards & working practices. Thorough knowledge of Primavera (P3).
Good communication,Self motivated,Analytical and Team player. B. Engr. Elect/electronic
Quality Assurance/Control * Inspection & Project Engineering * Welding * NDT * Coating * Fabrication * Construction * Offshore and Onshore Gas / Oil / Gas Plants*Jackets / Topsides / Well sites / Pipelines / Piping / Structural / Pressure Vessels / Tanks /
Telecom Engineer transmission speciality more than 16 years experience
18 years experience: design of suppression and alarm systems, manage design, review P&ID for HPR chemical plants, CFD modeling, nuclear industry FHA, performanced-based: (fire exposure, fire endurance, smoke control) designs, firefighting experience 5 years
Position Objective: Senior Managerial position in electrical or electro-mechanical industrial firm. The aim is to bring the facility’s productivity, profitability and quality up to a highly recognized standards utilizing personnel, technology & procedures.
Ph.D. materials engineer with 23 years of R&D experience in: a) Program management; b) Measurement of material properties Test method development and fixture design; c) Polymers, composites and their processing; d) Laboratory supervision and management of technical personnel.
A Professional Mechanical Engineer with nearly 13 years of experience in project as well as maintenance field in Power and Petrochemical industries, to seek a performance oriented and challenging career in the Industry.
A highly competent and hard working Instrumentation & Control Systems Engineer
Over 12.5 years experience in process piping design. In Design equipment arrangements and piping layouts, isometric and GAD piping drawings with using engineering 3d and 2d software. My other activates such as material take-offs, checking, and supervising the piping personnel as in team.
AWS,CSWIP with 16 years of experience
Sales Engineer
I 19 year experince in instrumentation.
Education : 1).M.Tech (Mech) 2) B.E (Mech) Software Skills:- CAESAR – II 4.5 & 5.0, PDMS Review & PDS / Intergraph Smart Plant Review (SPR) and Piping Stress Engineer + 7 Years of Experience
10+ years of experience in Piping Design, detail engineering, PDS, Estimation& tendering.
A dedicated, hard working and objective driven Reservoir Manager with more than Ten year diversified experience in Upstream E & P Sector.
Drilling Engineer with 7 years of experience
PABX SERVICE ENGINEER
Production Engineer with 12 years of industry experience
Having Experience in Construction of all Types of building. Industrial Substation, foundation, Water Treatment Plant ,Tank foundation, Pipe rack foundation, Infrastr
25+ Years Experience Prepared P&IDs, equipment arrangements, piping layout drawings, system and fabrication isometrics, and as-built drawings. Provided field construction support services including: QA/QC for mechanical systems, trouble shooting and correcting mechanical/piping conflicts.
Senior Drilling Engineer with over 10 years of experience in both international and domestic arenas of drilling, completions, and workover operations with dual citizenship in Canada and Brazil. Excellent cross-cultural communication skills with language abilities in Portuguese, French, some Bahasa
Process/P&ID Designer with Smartplant PID experience
Senior Vessel Designer
Good in design of pressure vessels and storage tanks, Cathodic protection, Corrosion monitoring and control of pipelines; Installation/maintenance of gas turbines; Excellent in facility management, inventory, warehouse and logistics management; Good in preventive and corrective maintenance
I am a very experienced cementer thats is hard working, enthusiastic, reliable and trustworthy and also able to lean new things fast.
Oilfield Experience: 25 years
Instrument & electrical design and field work
Sr. piping designer/checker, total 21 years experience in oil and gas field
Autocad, Bentley AutoplanXP, Navis Works, Isogen, Excel, Access, Word
Reservoir engineer - Experience in tight sands and shale and CBM
I have more than 10 years of maintenance experience as an instrument technician
I have 15 years experience as Extraction-Production Onshore Oil & Gas Engineer (artificial lift, Sucker Rod Pumping, PCP): Section Head of Field Extraction-Production Onshore Oil & Gas, Technologist Engineer, Night Shift Engineer, Echometer, Optimization Wells, Slickline
NDT Level III
My experience in different Engineering Consultancy Company like SMEC International Ltd.as well International Contractor like Construction & Industrial equipment Ltd in St. Lucia, Caribbean Island, Strabag International assigned in Libya, Willbros International Inc.,Houston Texas, assigned in Nigeria
A highly effective Chemical Engineering Professional who meets challenges head-on and creates positive change. A creative and detail-oriented Six Sigma Black Belt, with a proven record of success in new product development and process improvement; and track record of success developing and leading
BSc in env. MSc in safety eng.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   [ 23 ]   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com