Resume - Planning of all the activities of Major and Minor inspection of conventional ste...

Misco Jobs

Resume #81360

CONTACT INFORMATION:
View contact information...

Objective
Require to obtain a challenging position as a Maintenance Engineer in power generation where I can utilize my extensive experience and skills effectively in a reputed organization with a healthy working environment which enables a clear objective, development and appreciate quality work.

Highlights of Qualifications
* 14 years experience as a Maintenance Engineer
* Highly skilled in repairs and troubleshooting of various equipments associated with large fossil fuel fired thermal power stations.
* Highly skilled in planning projects and ensuring targets and budgets are met on time.
* Good skill in Ms. Office and Internet Browsing; Knowledge of computerized planning Maintenance system (Maximo and Orion).
* Professional work ethic and good team leader.

Employment Skills & Experience
Maintenance and Troubleshooting
* Complete and partial overhauling of 210 Mw TCDF, Hitachi steam turbine, 75 Mw Franco Toshi and 68 Mw pass out Steam turbines.
* Inspection, periodical maintenance and overhauling of Boiler feed pumps having capacity up to 400 tons/hr at 150 bars, Condensate extraction pumps, large capacity Mixed flow pumps and rotary water sealed vacuum pumps.
* Inspection, periodical maintenance and overhauling of double acting two stage, Vee block instrument and service air compressors.
* Tube leak detection and consequent repair in HP heaters, LP heaters, Condenser and auxiliary coolers etc.
* Routine and shutdown maintenance of 680-tons/hr Water tube Boilers and their auxiliaries.
* Inspection of boiler drum internals and repair, soot blowing system, forced draft fans, gas recirculation fans, boiler firing equipment and setting and safety valves floating checks of drum and super heater safety valves and Electromagnetic relief valves.
* Review of failure reports in Maximo, analyze the requested jobs, identify priorities, allocate work to subordinates and follow up execution.
* Review of the progress of defect correction, breakdown maintenance and lubrication work. Analyze the observations during these works and plan subsequent action.
* Report to / discuss with Concerned Manager on rescheduling of work or plant shut downs for planned and emergency corrective action.
* Analyze data obtained from defects correction, breakdown maintenance, check the type of failure and plan action in consultation with Concerned Manager.
* Coordinate with other departments as required in executing the defect correction and arrangement of support services from other agencies.
* Procurement planning and follow up action in coordination with purchase department regarding general consumables, spares and proprietary items from OEM.
* Strategic Planning for the procurement of necessary spares for next 5 years according to RLA (Residual Life Assessment) of plant equipment.
* Preparation of overhauling reports, defect root cause analysis reports and ensure safety disposal of general and hazardous waste and local municipality procedures and laws.
* Conduct tool box talk for all the activities before proceedings, assessment of safety risk involved and ensure related safety measures.
* Preparation of Risk Assessment of all the maintenance activities and review of these reports annually or after an accident.
Operations Activities
* Provide technical assistance to the owner in all corporate agreements including OMA, PPA and FSA
* Update the routine database and analyzing the trends including the performance trend, load forecasting and fuel consumption & ordering.
* Coordinate and support maintenance and performance department of O&M contractor for measures to be taken for improving plant performance.
* Review of plant systems betterment proposals/modifications submitted by O&M contractor for improving safety, reliability and availability of the plant.

Planning /Organizational Skills
* Planning of all the activities of Major and Minor inspection of conventional steam turbine of various capacities from shut down to start up and over speed testing.
* Planning, scheduling, supervision and execution of rehabilitation work Re heater Coils of unit # 1 & 2 and Ljungstrom Air Pre heater of unit # 1 at Bin Qasim Power Station (210x6 Mw) in supervision of Babcock Hitachi and ABB experts according to the specified procedures and standards provided by the manufacture.
* Planning, scheduling and execution of chemical cleaning of 680 t/hrs capacity boilers in supervision of M/s Halliburton Ltd.
* Associated with NESPAK Consulting Engineers for the erection and commissioning of Bin Qasim Thermal Power Station Ext. # 6 project, as Owner's Representative.
* Planning, scheduling and supervision of erection and commissioning activities of 210 Mw steam turbine, 680 tons/hr steam generator and their auxiliary equipments.

Employment History

Engineer Mechanical Maintenance 2005- To date
Dubai Water and Electricity Authority
Assistant Manager Operations 2005-2005
The Hub Power Company Ltd
Maintenance Engineer Mechanical 1992-2004
Karachi Electric Supply Corporation
Mechanical Engineer 1989-1991
Mohammad Din Containers (Manufacturers of Aluminum Collapsible Tubes)

Education and Training
Bachelor in Mechanical Engineering 1988
N.E.D University of Engg & Tech Karachi, Pakistan.
One year Apprentice ship Training in Mechanical Maintenance (Assistant Engineer) 1991-1992
Karachi Electric Supply Corporation at 210x6 Mw Bin Qasim Power Station.
Turbine, Generator and Auxiliaries, operation & maintenance and control system. 1997
Hitachi Works for Bin Qasim Power Station Ext#6.
Certificate of Completion (Familiarization Program) 1998
Black and Veatch International at Bin Qasim Power Station Ext#6.
Process Safety Management 2005
The Environmental Management Consultant; Karachi, Pakistan
Risk Assessment Training from Occupational Health & Safety Section 2007
Dubai Water and Electricity Authority, Dubai.
High Performance Leadership and Team Building 2008
By Dr. Mahmood Khan (TLPE, ICT International/ TEXPO)
First Aid Certificate for Appointed Person
From First Security Group Health & Safety Division, Dubai 2008

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 7055)

Go to Search Parameters...

Brief Description

diploma in chemical technology

I am diploma in Chemical Engineering. I have more than 25 years of experience as a process field and panel operator.

Currently I am Mechanical Technician in the oilfields in Sudan also have many years of experience as maintenance supervisor.

PDMS Structural Designer Offshore Experience

CFS-CV

I worked in Aker Shipyards Braila in Hull Design Department as ship designer. I was involved in several projects on making of hull structure drawings, workshop drawings, lines faring for different types of maritime vessels built in shipyards: cargo vessels, supply vessels, RO-RO, container vessels,

Free! 20 years experience in Control Systems design and drafting. Industries include: Refining, Petrochemicals, Pharmaceuticals, and Brewery. Working knowledge of AutoCad MicroStation, Microsoft Excel & Access, PDS modeling, SmartPlant P&ID, SmartPlant Instrumentation (INtools) and SmartPlant 3D.

Hungarian chief rig mechanic with 30 years experience

Twenty-Nine (29) years of experience, working under various international companies in Middle East, Europe and in South East Asia countries.

A diversified and experienced individual seeking opportunity in mechanical engineering / management support or related field.

Planning of all the activities of Major and Minor inspection of conventional steam turbine of various capacities from shut down to start up and over speed testing.

development of process flow diagram (PFD) and P&IDs, equipment sizing & preparation of datasheet, heat and material balance, simulation on HYSYS, process improvement, Hazop Reviews, line hydraulics, debottleknecking to improve plant performance, commissioning and pre-commissioning activities.

PLAN SUPERINTENDENT,PLANT MANAGER.SHUTDOWN MANAGER,MAINTENANCESUPRINTENDENT.TECHNICAL CONSULTANT.COMMISSIONG ENGINEER

Diploma In Civil Structural Engineering, Designer, Detail Engineering, FEED,Oil and Gas, EPC, PDMS, PDMS DRAFT, ACAD, Microstation, Review Reality, Terramodel, Windows (MS word, MS Excel & MS PowerPoint) on Windows NT & 2000 Novell environment

Casing Vibration monitoring and spectrum analysis of Rotating equipment by using data collector & analyzer (SKF Microlog CMVA60) and data manager (SKF PRISM4 1.35 / SKF Machine Analyst 2.2)

Process Engineer with 19 years experience on which 12 years of Project Engineering, and Commissioning in international team environment.

Lead the Project in Oil and Gas in different companies namely CB &I, Ajman, Maersk Oil Qatar, Kvaerner Powergas Mumbai, Tecnimont ICB Mumbai etc.

ASNT NDT LEVEL-III +CSWP+ISO LA+RSO

OSHA 30 - WCS Well Control School

Sr. Electrical Designer with AutoCAD background & some Microstation experience.

A result oriented professional with 11 years experience of quality control, Quality inspection Management,NDT-inspection and CAWI-certificate holder

10 years experience in Design, Operation & Commissioning in Well head facilities, Gas gathering and processing, Gas Compression, Gas Dehydration, Gas Sweetening NGL Production, Crude/Condensate Stabilization, Produced Water Systems Water Injection unit ,Hydrotreaters, Hydrogen Generation Units .

In my 31 years of I&E Design experience I have attained many skills. These include • MicroStation V8 • AutoCAD R2007 • SmartPlant Instr V7 • Intools • Intools • Safety Instrumented Sytems

Piping design autocad microstation ceasarII

Working as Sr.Instrument technician with OXY Qatar. Involved with Maintanenace and commissioning on offshore.

Senior Completions engineer with excellent welltesting skills.

Geoscience consultant for integrated studies, seismic interpretation, reservoir characterization, reservoir geophysics, and interpretive seismic processing.

QHSE + E manager worldwide

Experienced E&P Geologist cum Manager with M.Sc. (Geology) and MBA degrees with over 25 years integrated experience from discovery of new prospect to delineation and evelopment.

Drilling Fluid Engineer having 17 years experience

Thermal Designer Boiler Heaters

I have undertaken the Several Category of Scope & Quantity Verification for Cost Control, Invoice Claim and Change Order Claim to Client. And also, I have undertaken the several Type of Contract ; Fixed Price, Cost Reimbursable and Unit Price.

EDUCATION: B.S., Geology, The Pennsylvania State University, 1985. Experience in exploration, and geophysical well log.

Instrument Engineer with over fifteen years of experience in the Engineering, Construction & Commissioning of Instrumentation and Control Systems for Oil, Gas and Petrochemicals industries. Extensive knowledge and experience in the installation, commissioning, maintenance and trouble shooting of Ins

More than 16 years experience on electrical field

EXPERIENCES IN DESIGN, CONSTRUCTION,REVIEW,QC,PRECOMM AND COMM, COMPLETION ENGINEER

Multi tasking experienced Geologist(MSC.)/ P.Engineer(PhD), looking for positions in geology/ reservoir engineering (even on entry level). I am fluent in many languages, willing to relocate Worldwide, available immediately. Presently living in Canada.

Chemical process engineer with 18 yr's of Up- and downstream Oil & Gas experience

Lead Rotating Equipment Engineer / Lead Packaged Equipment Engineer / Condition Monitoring Senior Specialist

Chief Inspector for Pengrowth Corporation. 17+ years of experience in inspection in NDE, Plant enviroment and field. Certifications include CGSB UT II, MT II, API-510, Studying for National Board exam in December.

valve Inspector,Maintenance Supervisor.Advisor, SME

Experienced Refractory Project Manager / Construction Manager / Consutant

Autocad, Autoplant, Navigator, Navis Explorer, Autoplant Administrator, GTX Rastercad, LFM Modeller/Server, All aspects of Pipe support design, Piping Design Section Leader, Piping codes and standards, MS Access and all windows based software, skilled in all aspects of Piping design & layout.

Twenty-Plus years experience in the design, development, commissioning and maintenance of Process, Batch and Material Handling Control Systems. Experienced in a variety of industries including Petro-Chem, Food, Power Generation, Offshore Production and Land based Drilling.

Boiler Service Manager

Technician in mechanical engineering

With 15 years piping design and construction experience for onshore/offshore facilities, skidded process systems and topsides for clients such as Shell, Petrobras, MODEC, Petronas, BP, Saudi Aramco, Petrokemya, ExxonMobil, Mutineer & Exeter, CNOOC and Qatar Petroleum.

Rotating Equipment Engineeer with 15 yeras of Experience in Oil & Gas Sector

This is Esmaeil Rezaei from Iran and I have 37 Years old. I was graduated form Shiraz University with M.S. degree in chemical engineering. I have 12 years experience in petrochemical company in Shiraz city.

Subject: Application for the Post of Geologist

First 1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out