Resume - Bachelor in Engineering - Metallurgical Engineering.

Misco Jobs

Resume #81421

CONTACT INFORMATION:
View contact information...

Objective:
To obtain a position in the Engineering Service Industry, where I can utilize my previous work experience and expertise to advance in to upper level management.

Education:
Degree: Bachelor of Engineering (B.E.)
Branch: Metallurgy
College: Faculty Of Technology & Engineering
University: Maharaja Sayajirao University, Vadodara, Gujarat, India.

Work Experience:

Name of the company: Elecon Engineering Company Limited,
Location: Vallabh Vidyanagar, State: Gujarat, Country: India.
Company is engaged in Heavy Engineering Equipment Manufacturing i.e. Material Handling Equipments like stacker reclaimer, loader – unloader, long material conveying systems and Industrial Power Reduction Gear Boxes.

Positions & Working duration:

Senior Manager:
2004 Onwards.
Along with above responsibilities added responsibilities given were over all In-charge of Heat Treatment Shop, Metallurgical Quality Control & Material Testing Laboratory i.e. Metallography, Mechanical testing of Metallic material & Chemical analysis of Metallic Material.
Deputed as Coordinator to Management Representative for ISO 9001 implementation and Maintenance in the entire organization. Document preparation and implementation at all stages.
Deputed as Technical Manager & Quality Manager to implement & maintain the accreditation of Material Testing Laboratory according to ISO / IEC 17025. Document preparation, authorization, distribution & implementation within the laboratory.
Vendor development, educating them for QMS & TQM etc.

Manager:
1998 to 2004.
Along with above said responsibilities the added responsibilities for Quality Control at Inward stage, Process stage and final stage added for Metallurgical and Dimensional. Here also take care of Hardness & Dimension measuring instruments and metallurgical microscope with image analyzer. Process improvement, validation etc. to achieve & fulfill customer requirement. Write down the SOP and implement in the routine work..

Deputy Manager:
1988 to 1998.
During this period along with above said responsibilities worked for process improvement and establishment. Here I have change the process parameters, accessories etc. to achieve consistent quality with minimum cost & rejection or rework. This effort produces effective process cost reduction to the 30% i.e. saving in electricity and consumables and reduction in process cycle time i.e. productivity increased by 12%. Process improvement with process cost reduction.

Technical Executive:
1984 to 1988.
During this period along with Junior Engineer responsibilities worked for fixture selection (here I have recommend to change the material of fixture from Mild steel to Heat Resisting steel) which gave maximum utilization, improved output, improved life of fixture, minimum distortion, reduction in process cost and reduction in rejection cost etc. Planning & Production responsibilities.

Junior Engineer:
1980 to 1984.
During this period I have to look after the day to day working of Heat Treatment shop. Maintaining and updating log book with day to day working. Supervising the workmen and routine work and controlling various processes like Carburising, Hardening, Tempering, Annealing, Isothermal Annealing Pearlitizing, Normalizing, Stress Relieving etc. Here worked in all the three shifts.

Technical Apprentice:
1979 to 1980.
During this period I have been trained to work on shop floor in Heat Treatment shop.

Additional Responsibilities:

Assisting / helping / guiding in vendor development for bought out items for the organization.

Educating, developing and helping in upgrading the subcontractors to comply with the specified requirements.

Helping for establish TQM / QMS at vendor end.

Assisting / guiding Design & Development Department for selection of material & heat treatment according to the application.

Carry out metallurgical failure investigations and suggest remedies / changes in process sequence / material condition etc. to relevant department.

Maintaining all relevant documents for process, quality records and all test data in a proper manner that can be retrieve by all relevant easily as and when required.

Initiating budget proposals for testing equipments and other resources according to expansion plan, modernization, testing reliability improvement and effectiveness.

Managing fabrication of steel to steel, steel to alloy steel, steel / cast iron to non ferrous, steel to stainless steel.
Preparing, implementing & maintaining WPS, WPQ & PQR for various welding processes according to ASME SEC IX.

Personal: Marital status: Married
Children: One daughter & one son
US residential status: Green card holder, can work for any employer in United States.

References:

* Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2451 to 2500 of 7011)

Go to Search Parameters...

Brief Description

Technically accomplished & competent professional with over 9+ years’ rich experience on Refinery Inspection department Activities, starting from Refinery construction stage to pre-commissioning and Normal operation. Currently working as Assistant Manager (Inspection) with NRL

Having total 11 years experience out of which 10 years in Oil & Gas and Shipbuilding Industry as an Cost Estimator, Cost Control Engineer, Tender Coordinator and HSEQA Adviser in the leading FPSO/FSO Company, Shipbuilding/ship repair and conversion yard.

Chemical Engineer. Main experience as chemical treatment and corrosion engineer in Oil&Gas facilities (gas, steam and water injection plants, tank farms). Engineering and field experience. Oilfield chemicals selection and testing. Process optimization. Control and Instrumentation experience.

Wellsite geologist, wireline corelation, mapping, pressure detection, hands on well control advisor, well design, rheology and hydraulics solutions.

B.E. Mechanical Engineer, Middle Management Maintenance Executive. Demonstrated willingness and ability to quickly acquire new expertise, solving problems related with Rotating Equipment reliability and performance. Looking for challenging opportunity and career advancement.

Senior Piping Designer CADD

Mechanical / Piping Engineer

Working in all fields of civil qc civl & qs civil is maincan work as project manager for oil &gas field &bulding construction

Im graduated of bachelor of science in civil engineering, I have 14 years experience in Drafting/Design for structural steel, FPSO pressure vessel and piping layout thru P&ID. I have background in qaulity inspection for dimensional and visual, also Im NDT-LEVEL II Inspector (DPT).

Instrumentation Engineer With 10 Years Experience In Managing Engineering,Re-vamping,Installation, Commissioning And Maintenance Of HONEYWELL DCS/SCADA Systems

Project Control Manager/ Lead Planning Engineer - Oil & Gas.

I worked in automation and process consulting companies for six years.

Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices

I am Mechanical Engineer having 14 years of working experience in Maintenance of Petrochemical and Fertilizers Plants. Good knowledge of SAP, MS OFFICE.

I am an Electrical Engineer from Colorado School of Mines. I have worked for two major oil companies. I have worked on several areas of energy industry as an Electrical Engineer.

Customer service, Training and I & C; Problem Solving + fault finding; Contract negotiations / Presentations; Flexibility and adaptability to rapid changes

A result oriented professional with 15.0 years of experience in Production Planning and Control, Quality Assurance, Operations & maintenance and Projects. Currently associated with Equate Petrochemical Company, Kuwait

I have 3 yrs experience as a Mud Engineer and a landscape irrigation license. I am also working toward a Masters in Project Management

Perform a loop checking to check the data output from Field to DCS should be no Tolerance and Testing the Integrity of the Loop and the operation of any recorders or similar devices installed in the loop.

Seeking a suitable challenging position in the field of Electronic & Telecom Engineering which gives scope for future growth and learning opportunities.

15yrs In the Indian Navy as a Hydrographic Surveyor, served onboard various Indian Naval Surveying Ships and four years as a Hydrographic Surveyor with Fugro India Pvt Ltd worked on various survey ships and offshore construction Barges in oil and gas field.

Very Good Experience in Honeywell DCS,Safety Manager

Hplc Chemist,Responsible for Research & development of Analytical chemistry methods

Free! I come with17 yrs exp in the technical, operational and management aspects of Well Completions in the Oil & Gas industry. I am interested in rewarding and challenging opportunities as a Completions / Well Services / Well Test Consultant where I can contribute from my wealth of experience.

A seasoned professional with rich experience of 3.5 years in the areas of process engineering, equipment erection and commissioning with specialisation in the area of Oil and Gas Industry.

Work as Instrument Technician in oil & gas for almost 9 years. Familiar with most of the instrument and equipment for calibration. Work with Petronas,Malaysia before and now with Ras Gas,Qatar.

Electrical Engineer

Detail Driven Engineer with an experience of 3 years. Diploma in Mechanical Engineering and a track record of success in consistent achievement of engineering project goals.

Well Test and C&WI services, i.e., Coiled tubing, acidizing, sand control, wireline, Fracturing, cementing, well testing, slickline, e-line, perforation programs, down hole plugs, x-mas tree change outs, and other.

Maintenance and Commissioning of Process control Instruments in Oil and gas Plant.Trouble shooting and faultfinding of ESD and DCS loops.Servicing and calibration of Control valves,pressure,flow,temperature,level control instruments.

2+ years of experience in Automation field. Currently working as Executive Engineer in M/s.Yokogawa India Limited

Analytical chemistry lab-skills for testing materials in quantitative and qualitative purpose with conventional or instrumentation techniques (UV-VIS, Atomic Absorbance and Infra Red Spectrophotometry, High Performance Liquid Chromatography, Gas Chromatography, Flamephotometry.

I have over 36 years in the Oil & Gas Industry. International experience on land & offshore. Experience in remote location logistics. Have worked in desert, mountains, & jungle. Have drilled HTHP wells with oil base mud. Experience drilling horizontal & underbalanced. Spanish Speaking.

Bachelor in Engineering - Metallurgical Engineering.

BE in Mechanical Engr

Design Engineer-Static Equipments with 4 years Experience

Ensuring good quality control of mud system by analysis of drilling Mud additives

Have 10 years in cementing, tools and drill stem testing

MIET Polytechnic, Trichy, India Diploma in Mechanical Engineering, St.Joseph's Higher Secondary School, Trichy. Engineering Group

FEED, DFR, RFP, Detailed Engineering

GULF EXPERIENCE

Instruemnt engineer( PLC ,DCS ,ESD,field instruments )

My name is Adenowo Tosin Akeem, i hold a Bachelor of Science (B.Sc) degree in Earth Sciences(geology). Am interested in your reputable firm which i believe would need my experience. The following is a brief on my experience;

A highly motivated and experienced Construction and Structural Supervisor , with experience in oil and gas industry. An awareness and commitment to HSE implementation. Valuable team member, able to work on oBrief Description:* (Plwn initiative, with excellent man management and communication skills.

Experienced in Planning & Scheduling, Good knowlege of Primavera and MS-Project Software Operations, etc. HND in Mechanical Engineering

I have done post graduation in Geophysics with 1st class/A Grade. i have a year of seismic servicing industry experience working as an Assistant Geophysicist in one of the leading geophysical companies in Pakistan furthermore i have done 4 weeks internship in Prospect Generation Department of OGDCL

Drilling Fluids Engineer, Power Plant Engineer

A hard worker who can create mechnical design. Knowledgeable 3D design such as Autodesk Inventor and Solidworks and can give from the scartch design. Have designed various of automated machine such as test handles, coveyors, laser handlers, jigs and fixtures.

Mechanical engineer, autocad, offpipe, microsoft

Specialized in Corrosion & Materials Technology, Failure analysis, Quality control and Project Management

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 [ 50 ] Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out