Resume - Project engineering and management, electrical and process engineering, project ...

Misco Jobs

Resume #81437

CONTACT INFORMATION:
View contact information...

BIRTHDATE: 04 December 1958
MARITAL STATUS: Single
HEALTH: Excellent, non-smoker
PASSPORT: Canadian
EDUCATION: 1982 University of Calgary, Canada - BSc Electrical Engineering
1984 University of Calgary, Canada - MEng Electrical Engineering
MEMBERSHIPS / AFFILIATIONS: Association of Professional Engineers, Geologists and Geophysicists of Alberta (APEGGA), Canada: P. Eng. (Professional Engineer) since 1984
Institute of Electrical and Electronic Engineers (IEEE): Member since 1980, was Chairman of the Southern Alberta Section (Canada) for 2 years
LANGUAGES: Fluent in English and Russian (written and spoken), excellent knowledge of technical electrical and instrumentation terminology; often leads technical and business meetings in Russian.

KEY WORDS:
Project engineering and management, electrical and process engineering, project cost control and schedule, business development, electrical network simulation (ETAP), renewable energy projects; variable frequency drives, power generation equipment, transmission line and substation design, relay protection studies, soviet design standards, Russian speaking, technical translations, oil & gas, minerals and metals, FEED (front-end engineering design), drawing procedures, mentoring Russian-speaking engineers.

CAREER HISTORY
WORLEYPARSONS, KAZAKHSTAN
JAN '08 – PRESENT General Manager, Almaty Branch Office
* Reports directly to the in-country President; supports business development and tender activities in the Power Generation, Infrastructure and Minerals and Metals sectors; supports on-going work with gold and copper mines (Kazakhmys) including an alliance venture, uranium mines (Inkai), borates and potash mine (Satbor); responsible for the daily operation of the Almaty branch office including HR issues, visas and work permits; involved with pre-contract and corporate activities in Kazakhstan.
AUG '07 – DEC '07 Project Manager, Electrical / Power Division, Acting General Manager, Almaty Branch Office
* In the capacity of Project Manager, responsible for Client co-ordination, interfacing and communication of project objectives, preparation draft CTRs (cost time resources) for engineering review and development, develop and monitor agreed project execution plans; direct cost and planning engineers relating to project issues; collated and developed several bid proposals, identify, monitor and communicate critical path activities, interface with lead engineers relating to day to day project engineering issues, collating and developing project status reports, monitoring project growth, monitor project budget, monitor compliance to contract, supervise accounting relating to project issues, develop and issue weekly and monthly project reports as required by the client and internally, progress required information from Client, co-ordinate logistics for client meetings and surveys, review Client comments and approval on issued documents, collate project close out reports, compile and issue lessons learned reports. Presently, four projects are being managed.
* Acting General Manager supports business development in Power Generation and Minerals and Metals sectors.
KPO B.V., AKSAI, KAZAKHSTAN (KARACHAGANAK FIELD DEVELOPMENT PROJECT)
Karachaganak Petroleum Operating B.V. (KPO) is a 40 year joint venture between British Gas, AGIP, Chevron and Lukoil to develop the Karachaganak field (located in north-eastern Kazakhstan) which is estimated to contain 1.2 billion tonnes of oil and condensate and 1.35 trillion m3 of gas. The field pressure is 460 bar and contains 4% H2S.
JUN '05 - JUL '07 Project Engineer, Debottlenecking Project, Engineering and Project Management Department
* Project budget: $100 million to end of 2007. Project scope is to de-bottleneck all aspects of the production facilities (two processing plants, sour gas re-injection station and all gathering, trunk and export pipelines) to increase overall capacity to 110% at 95% availability. Main scopes included detailed process simulations (HYSYS and PIPESYM), DCS control system optimisation (Honeywell) and power system modelling and optimisation studies (ETAP). Updating P&IDs, PDFs, preparation of detailed purchase requisitions (heat exchangers, replacement trays for process columns, large diameter high pressure line pipe, valves, pig traps) and contract preparation for vendor representatives and specialised process engineering studies. Reports with recommendations were submitted for management approval for FEED and detailed design using external engineering companies. Responsible for project budget, schedule, reporting, inter-discipline coordination and liaison with external engineering contractors.
AGIP KCO (KAZ. NORTH CASPIAN OPERATING CO.), ALMATY, KAZAKHSTAN (KASHAGAN FIELD DEVEL. PROJECT)
Kashagan is a 40 year joint venture between AGIP, the Government of Kazakhstan and various other partners to develop the super-giant Kashagan field (located 80km offshore in the Caspian Sea) which is estimated to contain 13 billion tonnes of oil. The field pressure is 900 bar and contains 20% H2S.
AUG '04 - MAY '05 Project Engineer / Lead Electrical Engineer, Execution Contractor Management Team (ECMT)
* the initial phase of the onshore project concerns the design of the power generation station for the offshore oil field; generation capacity is 245MW @ 40C and will provided by five GE Frame 6B gas turbines and two Nuovo Pignone steam turbines.
* chair and minute weekly progress meetings with the Execution Contractor (EC) and ECMT representatives of the engineering disciplines, track, check and consolidate comments on EC-produced drawings from all engineering disciplines, ensure the timely input of such comments into the web-based document control system, track and resolve in a timely manner all Technical Queries, Change Notices and Company Instructions associated with the detailed design of the power station. Participated in HAZOPs of the Power Station.
* provide technical support to the ECMT during execution of the work; manage, supervise and co-ordinate the execution and approval of the detailed design by the EC; manage the engineering interfaces with AGIP KCO, Kashagan Development Project Contractors (KDPC), third parties and other Package Management Teams.
RTG GROUP, MOSCOW, RUSSIA
APR '04 - AUG '04 Operations Director
* interviewed and recruited senior Russian engineers and translators for oil and gas projects in Russia; worked with representatives of Shell, TNK-BP, Caspian Pipeline Consortium (CPC); prepared tender documents and personnel contracts in two languages.
TENGIZCHEVROIL LTD JOINT VENTURE, TENGIZ, KAZAKHSTAN (TENGIZ FIELD DEVELOPMENT PROJECT)
Tengizchevroil is a 40 year joint venture between Chevron, ExxonMobil, LukArco and the Government of Kazakhstan to develop the giant Tengiz oilfield (located on the northeast shore of the Caspian Sea) which is estimated to contain 25 billion barrels of oil. The field pressure is 800 bar and contains 18% H2S.
JAN '97 - MAR '04 Lead Electrical Project Engineer, Facilities Engineering Group
* front-end design and studies for various capital projects; scope definition, preparation of schedules, man-hour estimates, budgets, AFE preparation, regulatory issues, Russian language translations, fault studies, relay coordination studies, bid evaluations, supervision of local and expatriate engineers and designers.
* project detailed design (all in-house, no outsourcing): crude rail loading facility, crude stabilisation/vapour recovery systems, 35kV overhead lines and substations for new Korolev field development projects ($17 million), design and installation of 4 pre-owned GE Frame 6 (32MW) gas turbine generators ($42 million), sulphur storage and handling facilities, expansion of two 10kV 15MVA substations in existing plant ($10 million), plant power management system, replacement of existing 120MVA 110/10kV soviet-built substation ($30 million), 1600kVA emergency black start diesel generator, design and installation of new 52MVA GE Frame 6 gas turbine generator set ($26 million).
* project engineering: 35kV overhead power lines and substations for new construction camp ($10 million), construction power supply (double circuit 10kV) power lines to Second Generation Plant (SGP) and Laydown area for Contractors ($3 million), expansion of 110kV switchyard for interconnection to Second Generation Plant (SGP) site ($5 million).
JUL '93 - DEC '96 Lead Electrical Engineer, Plant Operations/Capital Projects Group, EI&C Group
* responsible for electrical and instrumentation estimates, specifications, design and start-up of projects within the refinery, DMC (Demercaptanisation) and off-plots areas; primarily retrofits and improvements to existing facilities; also involved with computer modelling and electronic metering of the plant power system.
* design and field engineering duties for Infrastructure projects, oil processing plant, LPG and sulphur plant expansion, export shipping pumps, caustic incinerator, air plant, firewater system, DMC plant; duties included detailed electrical design, work scopes, specifications, start-up, liaison and supervision of Contractors, preparation of as-built drawings and related documentation for handover to Operations Group.
INTERNATIONAL BECHTEL INC - AHMADI, KUWAIT (IRAQI WAR RECONSTRUCTION PROJECT)
MAY '92 - JUL '93 Lead Electrical Engineer, Al-Tameer / Major Projects Group
* modelled entire Kuwait Oil Company power distribution system (over 500 buses), including over current relay coordination and fault/load flow studies based on collected field data; used CAPTOR and ETAP programmes; provided reports, recommendations and cost estimates to upgrade relay protection systems and re-configure electrical systems.
* as part of the reconstruction effort, assigned duties were electrical design, work scopes, specifications for 20 existing oil gathering centres, 4 desalting facilities and 2 gas booster stations; field engineering duties included preparation of damage assessment reports, relay calibration, commissioning and start-up, supervision of commissioning teams.
RINDT ENGINEERING SERVICES LTD - CALGARY, CANADA
FEB '92 - MAY '92 * Energy Management Specialist: performed several harmonic resonance, power factor correction and variable frequency drive feasibility studies and corresponding economic evaluations; conducted seminars on similar topics.
DELTA PROJECTS INC - CALGARY, CANADA
JAN '91 - FEB '92 Senior Electrical Engineer, Power and Control Systems
* computer simulation of load flow, fault, large motor starting and power system harmonic studies for four major projects: two Co-generation projects (70 and 110MW) in Ontario; 40MW Dow Chemical ethylene plant in Fort Saskatchewan, Alta; 25MW Shell gas and sulphur plant in Caroline, Alta.
* design of PLC control system for third train of Amoco Canada Empress Gas Compressor Station; design of electrical system retrofit (2.4kV to 4.16kV) at Amoco Canada East Edmonton Pump Station.
PEACE PIPE LINE LTD - CALGARY, CANADA
Peace Pipe Line operates over 2000km of hydrocarbon liquids pipelines and is able to transport crude oil, NGL, propane, ethane and butane using a batching system through common pipelines. Gathering and pumping systems are remotely controlled over a microwave system from a central control location using RTU, radio and PLC equipment.
APR '88 - JAN '91 Electrical and Instrumentation Engineer, Pipelines and Pump Stations
* Duties included protective device coordination and calibration, PLC configuration and programming, specification of electrical and instrumentation equipment, preparation of bid documents and project estimates, preparation of detailed electrical and instrumentation designs for new and retrofitted pump stations and LACT units including single line diagrams, schematics, wiring diagrams, cable schedules, control panels and switchgear layouts, ladder logic diagrams.
WESTINGHOUSE CANADA INC – INDUSTRY SERVICE DIVISION, CALGARY, CANADA
1985 - 1988 Energy Management Specialist
* performed load research studies and load shedding schemes; power system harmonic studies on systems to 69kV (Westar Mining open pit coal mine); solving power system resonance problems; successful application of capacitors in harmonic environments; project conception to job completion including data gathering, presentation, design, specification, subcontracts, commissioning and start-up.
* provided numerous detailed reports and recommendations to customers; conducted educational presentations and seminars.
1982 - 1985 Commissioning Engineer
* duties included thorough testing, commissioning and start-up of new electrical facilities and maintenance testing of existing facilities; became proficient at coordination and setup of all types of relays, both electromechanical and solid state.
Computer Literacy Microsoft Office, Microsoft Project, ETAP (power system analysis), CAPTOR (relay protection)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 7040)

Go to Search Parameters...

Brief Description

Engineering Manager, Project Manager, Engineering Specialist

Actively seeking a position in „o PROJECT ENGINEER „o With an organization needing a professional demonstrating ability in providing consistent, cost effective methods improving quality of products while meeting best engineering practices

1. Oil and gas EPC experience for four years. 2. Design and engineering of static equipment. 3. 10 plus years' experience in mining industry. 4. Expertise in maintenance of static, rotating and utility systems. 5. Bachelor's degree in Mechanical Engineering and Master's degree in Maintenance Mgmt.

Chief Engineer STCW95 unlimited with Master's Degree. Experience on drillships, AHTS, tugs, etc. Ability to manage all engineering operations on board the drilling vessel to ensure proper operation and maintenance of propulsion machinery, drilling equipment and others whilst at sea and in port.

Project engineering and management, electrical and process engineering, project cost control and schedule, business development, power generation equipment, Russian speaking, technical translations, oil & gas, minerals and metals, FEED (front-end engineering design)

A qualified and experienced valves, piping and vessels engineer who is looking to return to mainstream engineering applications ideally as a contractor working overseas. Knowledgeable in the design and manufacturing of pressure vessels and pipework as well as valves/controls used in pressurised

A dynamic professional with more than 24 years of rich experience in Marketing, Sales, Business Development, Planning, Procurement, Process improvement, Manufacturing and Man Management.

Instrument and Control Systems Engineer, WorleyParsons, Qatar

Field operations and producing technology, Workover & Completion, Production Optimization, Water Flooding, Well Test Design and Interpretation, Artifial Lift Design and montoring, Well Planning and Development drilling, Strong software skills

8 year experience in materials, corrosion, thermal insulation and piping for the oil and gas industry, including FPSO’s, Offshore production platforms, Offshore offloading buoys, Onshore plants, LNG terminals.

A result-oriented professional with nearly 14 years experience in Piping Design, Operation & Maintenance, Quality Assurance and Relationship Management. Handled a varie

I am a Chemical Engineer and have a master's in Heavy Crude Oil Refining. i also have a master's in Work Health and Safety. I have extensive experience in Oil Refineries in the Construction and Maintenance of new plants. i am willing to travel.

SEASONED MAINTENANCE AND PROJECT MGMT. PROFESSIONAL

Senior Drilling Engineer

8 years' experience in petroleum refining; process modeling; profitability studies; production planning; LP (linear programming); PIMS; HYSYS; Petro-SIM; CrudeManager; Spyro; ProcessBook; DataLink; MS Office; M.Sc. in chemical engineering (specialized in petroleum processing)

Workover & completion supervisor

Over 20 years of experience in Plant Operations or Maintenance.

I possess over 15 years’ of experience in Project Management, Instrumentation & Automation, Operations & Maintenance, Installation & Commissioning and Man Management.

Instrumentation Engineer with 12 years experience of Instrumentation & control scope of project engineering and plant maintenance in Oil & gas,petrochemical and chemical industry.

A Design Specialist responsible for managing the setup, standards, training, design-team leadership, and coordination of Intelligent Data-centric CAD work within multiple offices and Engineering disciplines, both domestic and international. P&IDs, Piping, Smartplant, SPPID

Chemical engineer having more than 12 yrs. experience in petochemical in operation and design consultancy.Also having experience in precommissioning and commissionig of petrochemical plants.

Instrument Engineer/Inspector

Business owner, aerospace mechanical engineer, U.S. Navy military veteran.

More than 7 years experienced engineers with a PHD degree in technical construction can conduct strike-calculations and dimensioning of onshore marine constructions for oil and gas production. Skillfully use software like LS-DYNA, MARC, SESAM etc for the structural analysis.

Maintenance, Construction, commissioning for Refineries, FPSO, Offshore Platforms etc.

I am a dedicated professional who understands the importance of retaining accounts. My ability to get the job done, including quickly and accurately diagnosing and troubleshooting technical problems, has solidified the loyalty of numerous clients. I assure you, these factors, as well as the skills i

PDMS piping designer. PDMS modul design, draft, izodraft. Layout drawings and ISO sketch. Expeience in: piping design for power plants, Steam turbines, compressor plants, support design for chemical industry and refinery

I am actually working on behalf of ExxonMobil refinery in France as a system and network engineer. I have a good experience in control systems (PLC and DCs based systems) as well as in SCADA supervisory. You can find enclosed my CV with a brief description of my skills.

Worked as Material Engineer for Saudi Aramco Material Standardization Division for Equipment Spare Parts Cataloguing Project. Proficient in using SAP R/3, MACs, UNIX and ESP4.

Welding Engineer Specialist

Wellhead, X'mas Tree, Valves, Operations

Worked in Gas Dehydration, Well head, Gas Swetling, Utility & Tank Form& LPG Plants

28 YEARS OF EXPERIENCE IN ENGINEERING RELATED DESIGN AND CHECKING OF MAJOR PETROCHEMICAL, NUCLEAR, REFINERY, INDUSTRIAL AND COMMERCIAL FACILITIES UTILIZING AUTOCAD, MICROSTATION, PDS FRAMEWORKS, SMART PLANT REVIEW, TRIFORMA & BENTLEY NAVIGATOR,. WORKED ON A VARIETY OF DOMESTIC AND INTERNATIONAL PROJ

20 yrs piping detail engineering in Petrochemical/Oil and Gas / Offshore with multinational EPC companies.

Process Operations Superintendent

Team leader for Well Engineers, using probabilistic casing design & stress check software in order to design and write drilling & completion programs for deep HP/HT wells. Contract holder for drilling contractor and also active with VAR’s, WDP & other Shell initiatives.

I want drilling supervisor/Rig superintendent job

I have successfully completed innumerable complex and difficult Tasks/projects at minimum cost. At present I am working on a ‘Project’ namely ‘Rajiv cum Bush effect’ with my son (Computer Student) to revolutionize method of Production of Bits which has immense commercial value.

Over 12 years experience in oil and gas industry

As drilling fluids engineer, my experience covers a wide range of mud engineering aspect : to control the running of the mud system on the rig accordance with the operator’s requirements and in a safe manner, to ensure there are sufficent quantities of the correct materials to meet these requirement

13 years experience in oil, gas and petrochemical industrial dealing with installation, inspection, maintenance, troubleshooting and overhauling for rotating as gas turbines, compressors, pumps, gas & diesel engines, air fan cooler and heat exchangers in international companies at Egypt, Saudi Arabi

Mechanical engineer with fourteen years of international experience in engineering, consulting and construction. Extensive background with plant conceptual studies and detailed engineering in Oil & Gas industry. Expertise in designing of Pressure Vessels, Heat Exchangers, Storage Tanks

PDMS Designer with FPSO & Offshore exprience

Production Completion Engineer

I am Vasu Jajala working in Shell Nig.Ltd. As a Construction Instrument Supervisor. I have 16 years plus of practical experience in the field of Process/Machine Control Instrument of Offshore & Onshore, Petrochemical, Petroleum refinery, Oil/Gas and QATAR LNG industries.

A proactive and analytical Mechanical Engineer with over 12 years experience of Working in a Multinational and Multi cultural work environment in fabrication operations, welding processes, project management, quality / process enhancement ,maintenance with highly regarded organizations.

Over 15 years of relevant experience in Mechanical Engineering and management. Over 5 years of technical authorship in Oil & Gas Industry. Extensive knowledge of machinery, equipment and heavy duty vehicles, maintenance and repair strong practical skills and managerial abilities.

sedimentologist with 16 years of experience in siliclastic and carbonate rock:core descripton, petropgraphic analysisand diagenesis interpretation

Professional Geologist with over 16 years worldwide experience working for major operating companies in asset management/development teams, exploration and production. Worked on a wide variety of clastic and carbonate reservoirs. Key competences are listed below.

Sr. Piping Designer - CadWorx/AutoPlant

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out