Resume - i am an fabrication enginner working with saudi aramco gas oil seperation projec...

Misco Jobs

Resume #81489

CONTACT INFORMATION:
View contact information...

Objective Seeing for the challenging career and working on the Fabrication and Welding Technology in the field of Mechanical Engineering.
Training Related Experience (1)

ƒá JUNE-98 TO NOVEMBER-98 (6 MONTHS)
ƒá UNNATI ENGINEERING PVT. LTD, BAVALA, AHMEDABAD.
ƒá TRAINEE ENGINEER
Job Profile: - This was my 1st industrial training of 6 months. This training as part of our syllabus of DFT curriculum. I took training in all aspects of manufacturing of Pressure Vessel, Heat Exchanger, Reactors, all type of process equipments. I looked after production, production & planning and inspection (under third party inspection agencies like Lloyds, EIL, IBR, BVQIS, DNV, etc.)

Products: All type of process equipments like pressure vessel, heat exchanger etc. used in chemical & fertilizer industries.

Dept: Production, QA/QC, Production Planning.

Training Related Experience (2)
ƒá DECEMBER-98 TO MAY 99 (6 MONTHS)
ƒá I.O.C.L GUJARAT REFINARY, BARAODA.
ƒá TRAINEE ENGINEER
Job Profile: This was my 2nd industrial training of 6 month. This training was in part of our syllabus of DFT curriculum. I took training in all aspect of manufacturing of Piping Fabrication & erection as per GA. Maintenance of pump, valves, heat exchanger DG set, etc. I also took training of shut down maintenance and preventive maintenance. I also took knowledge of vibration monitoring.

Products: Petrol, Diesel, Gasoline, Naphtha, Asphalt, etc.

Dept: Piping Fabrication division & Maintenance dept.

Job Related Experience (1)
ƒá JANUARY-00 OT MAY-00 (5 MONTH)
ƒá RATNMANI SAW PIPE LTD. CHHATRAL, AHMEDABAD.
ƒá TRAINEE ENGINEER
Job Profile: Here my responsibilities were to supervise the shop floor and production of SAW pipe (size 8" to 42" dia), which include cutting, edge preparation and welding section. I was also involved in ultrasonic testing activity.

Cause to be out down the concern: For better prospects
And experience.

Products: Saw Pipe (MS and SS)
Dept.: Production.
Experience (2) ƒá MAY-00 TO DECEMBER-00
ƒá WELSPUN STAHL ROHREN LTD., DAHEJ, BHARUCH
ƒá WELDING ENGINEER
Job Profile: Here I was in Welding Depts. Responsibilities were to do inside/outside welding TANDOM SAW welding (Semi automatic) Lincoln make. I was responsible for to manufacturing quality welding of pipe. Maintain all parameters as per PQR/WPQ on welding m/c shop floor equipments. Maintain all records for consumption of filler material, flux, etc, as per ISO requirement. And complete final inspection before dispatch. Also check liquid penetrates test and fluoroscopy interpretation.

Cause to be put down the concern: Due to some personal problems.

Organization engaged in: Design and Manufacturing of SAW & Spiral Pipes 8" up to 42" dia. For cross country piping as per API 5L
Experience (3) ƒá DECEMBER-00 TO NOVEMBER-02
ƒá FIT-WELD ENTERPRISE (P) LTD, AHMEDABAD.
ƒá QC ENGINEER
Job Profile: Here my responsibility was to work at various site works as follow.
I was working in Pall Pharmacy lab for manufacturing of Filtration skid for L & T under LRIS Inspection agency.
I was also working there for fabricate F.C.C.U. skid of IOCL Refinery with Reactor, Structure, High pressure/temperature Piping (SA 335 P-5 & SA 335 P-9 material). Independently observe totally project form start to till final dispatch (8 months).AS PER ASME B-31.3,ASME,API.standerds
I was working at L & T NIRO Baroda for manufacturing of Savlon project form 2 mm thk SA 240 TP 316 L material. There I was qualified my company welder in DOT (Double operating technique) in GTAW process. (6Monts)
I was working at The Anup Engineering, for manufacturing spherical vessel from 45 mm thk SA 516 GR 60 of Diplex water treatment Ltd. 12 no. parallel I was also supervise heat exchanger, pressure vessel fabrication activity (6 Months)

Cause to be put down the concern: Due to some personal problems.

Organization engaged in: Take contract of whole project work like structure, piping, process equipments fabrication, erection at client work shop or site also.
Experience (4) ƒá DECEMBER-02 TO JANUARY-07
ƒá PHARMALB PROCESS EQUIPMENTS (P) LTD.
(VESSEL DIVISION) VATVA, AHMEDABAD.
ƒá QC ENGINEER (FABRICATION)

Job Profile: Here my responsibilities are to do fabrication operation engineering inspection & Production activity. When received manufacturing drawing from design department. Check availability of material like plates, coils, pipes, rods, etc. it is not in stock then indent give to purchase dept as per project requirement, parallel select vendor or contractor as per strength of machinery and man power. After allotting job of different project & guide him for each activity for fabrication to complete project as per scheduled target up to dispatch clearance by client. Activity also done by me in present of client at out site.

* I was also gone for installation and commissioning of Gelatin plant with pipeline at M/s BIO CON INDIA KLIMITED 2 Months.
* Complain for some finishing related problem also solved by me in 1 KL reactor at Dr. Reddy's Lab Hyderabad (1 Week)
* Complain for corrosion problem inside of the mixing vessel shell and crack observed in bottom dished end of the vessel its rectification by GTAW operation at TERUMO PENPOL LTD. TRIVENDRAMPURAM, KERAL. (15 DAYS)

Cause of to be put down the concern: To Excel.

Organization Engaged in: Design and Manufacturing of Process Equipments for Pharmaceutical, biotech, bulk drugs, beverages ad related industries. (Ointment process plant, multiple effect distillation still, syrup plant vessel, rubber stopper processor/sterilizer, pure steam generator, API production plant, Std. Filter press & Zero hold up F.P.

Experience (5) JANUARY-07 TO JUNE-07
ƒá THE ANUP ENGINEERING LTD.
(HEAVY FABRICATION DIVISION) AHMEDABAD.
ƒá QC WELDING ENGINEER (FABRICATION)

* Job Profile: Here I am working as a welding Engineer.
1) Understand Technical Requirements of welding related issues from customers' specification and code of construction for incoming new projects.
2) Preparation and Preservation of welding documents (Procedures, WPS, PQR, WPQR, Technical literatures).
3) Preparation and issue of shops for projects being executed by the shop to production engineer prior to commencement of any production welding.
4) Ensuring no welding takes place on the jobs with out proper welding plan.
5) Ensuring the right parameters (Process, consumables, preheat, inter pass temperatures, post heat) on production welds.
6) Ensuring only qualified welders are employed on production welds.
7) Implementation of good engineering standards in shop floor. Like ASME-II, V, IX, API-510, 650,ASME B-31.3

Cause of to be put down the concern: Opportunities work with Saudi Arabian oil company.

Organization Engaged in: Design and Manufacturing of all type of Process Equipments for Refinery, Petrochemical, Fertilizer, Research center, water treatment projects etc.

Experience (5) JULY-07 ONWARDS.
ƒá JOANNOU & PARASKEVADIES (SA) LTD.
ƒá Client:- Saudi Arabian Oil Company, GOSP Crude handling facilities.(SAUDI ARAMCO).

ƒá SAUDI ARAMCO APPROVAL NO:- 70008839

ƒá QC MECHANICAL SUPERVISOR

* Job Profile:

I am working with J & P KSA LTD as a QA QC Mechanical Equipment supervisor Saudi Aramco approved with Gas oil Seperation in Saudi Aramco in Saudi arebia Nuayyim Project since June 2007 still continoue.

1) Preparation & Issue of welding document WQT. Weld map, Weld test plan, and prior to commencement of any production weld.
2) Developing & Drafting Construction & QA/QC Procedures.
3) Monitoring welding activities to ensuring right parameters, pre heating, inter pass temperature on production welds followed by PWHT.
4) Ensuring that WPS parameters are maintained during all welding activities.
5) Stage wise inspection against RFI supporting SATIP/SAIC for all new activities at each stage of construction activities of project and take clearance from Saudi Armco PID for rotating equipment and static equipment.untill final alignment and final closer of equipment up to pre commissioning and commissioning work.as a supervisor level.
6) Materials, consumable and equipment receiving inspection.
7) Ensuring Conformance of consumable backing and holding requirements.
8) Implementation of project specification requirements and monitoring a shop and site. as per ASME ¡VII,V,IX,API-1104,ASME B-31.3.
9) Preparation of technical reports on all aspects of inspection like quality control of welding, NDT, Weld defects.

Cause of to be put down the concern: To Excel.

Organization Engaged in: Design and Construction Projects for Refinery, Petrochemical Research center, water treatment projects etc.

Computer Skills Office-00, Auto CAD-00
Education March-1995 Gujarat Secondary Education Board
* SSC 75.36 % marks obtained with science subjects.
* Objective: Prerequisite to enter in engineering field.
Education
1) 1995-1999 Technical Education Board, Gujarat.
Diploma in Fabrication Technology
Completed DFT with (elective subjects) Welding Technology and welding metallurgy with aggregate percentage is 78%.

2) UT, RT, LPT and MPT ASNT Level II With 85 % - January 2007

Additional Approval ƒá Approved As a Plant and Equipment Inspector By Saudi Aramco (Saudi Arabian Oil Company) Dhahran Area Project Inspection Section, Remote Area Projects Inspection Units.

ƒá Approved As a Material Receiving Inspector (Piping, Fittings & Structural Shapes/Plates) By Saudi Aramco (Saudi Arabian Oil Company)

ƒá APPROVED AS A MECHANICAL QA/QC SUPERVISOR SINCE JUNE 2007 STILL CONTINOUE.

ƒá SAUDI ARAMCO APPROVAL NO NO:- 70008839 Dhahran Area Project Inspection Section, Remot Area Projects Inspection Units.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 7055)

Go to Search Parameters...

Brief Description

Piping Designer with PDS, Rebis Autoplant, Plantspace, Microstation, AutoCad and ProCad experience.

E & I Technician

i am an fabrication enginner working with saudi aramco gas oil seperation project as a approved qa qc mechanical supervisor since june 2007

Automation, Instrument and Control Engineer Manager

I have B.S in Mechanical Engineering from Bushehr University in IRAN and I have more than 8 years of experience in Oil&Gas field and Power Plant companies, especially in piping division.

B.Sc.(Engineering) Metallurgy and Materials Science.

Certified Cost Engineer. Graduate Mechanical Engineer with over Eighteen Years experience in preparing Project Cost Proposals / Tendering including Estimation / Quantity Survey, Costing and all related activities. Completed Eleven Years in Gulf (Bahrain).

Fifteen years experience in the area of Seismic Data Processing including 2D and 3D land, transition zone, marine and OBC processing. Specialized areas including demultiple applications, imaging techniques, and Amplitude versus offset.

7-year offshore structural engineer with M.S degree

power system protection engineer with avery good experiance in protective relays testing control scheme troublshooting

Instrument Supervisor

Project Planner/Scheduler (Primavera P3 & MS Project Planning Software, MS Word / Excel). Vast experience in Steel Works Business - Planning, Fabrication / Erection (Storage Tanks & Steel Structures), Gas Plant / Pipelines. Completed Structural Engineering and 4 years in BS Mech'l Engineering.

Maintenance supervisor / Reliability specialist / Project Management

Broad base of experience within the Pulp/Paper, Pharmaceutical/Chemical and Bio-Technology industries involving design, engineering, construction, and commissioning. Management of projects (automation, instrumentation and electrical/instrumentation systems), quality, personnel and resources.

Developing & producing plot plans using PDMS 11.2 (CLS), pipe modelling (PDMS-PMS), Equipment modelling (PDMS-EMS), producing Piping Study & General Arrangement Drawings(PDMS-CAST), Producing Isometrics(Isodraft) & used Review Reality station for reviewing the plant model.

Certified ( Project Controls, AACE, #1366), published Engineer (BSPE and MBA) with over 15 years of direct field experience in Operations, budget design, Inventory control, Drilling Engineering, Oil Well Fire Control, Well design and Turnkey Bid estimates.

Education: Master in Chemistry Various certifications on Drilling Technology and Oil and Gas operations. Worked as Mud Engineer with MI Overseas. BakerHughes INREQ and IDF schlumberger in middle east. Worked as lab chemist with QGPC Qater, Mud Engineer with ADC Saudi Arabia ETC

Pr. Management-Estimating man hours, developing WBS CBS, Progress measurement techniques, monitoring by Primavera, project control, invoicing. Engineering-Prep. basic Instr data sheet, detailed ENGINEERING of DCS, FGS, SDS, control logic, SAFE. Commissioning -Elect system of process platforms

I am experienced in long & short range mine planning, scheduling, budgeting, design of safety procedures & standards, production & destress blasting, mine backfill, ventilation, ground control, geomechanics modeling & design of stable openings (using the bifurcation theory in mechanics).

Senior controls and Scada Systems Analyst

Mechanical Engineer Bsc. Hons. Project Engineer. Commissioning Engineer

Directional Driller with horizontal experience in shale and lime. Also have workover and completion experience,

Piping Stress Engineer

Registered civil engineer with Master’s degrees and 5 years of work experience primarily in structural design

Experience on process design of oil and gas industry units, engineering and tender documents preparation. Well familiar with process codes and standards and design requirements

Piping Engineer

Programming/maintenance of PLC/DCS controllers and SCADA systems. Maintenance of electrical/electronic and pneumatic/hydraulic instrument equipment. Maintenance of fire/gas detection systems (turbines, oil/gas production facilities). Excellent communication and management skills.

I am experienced in Air separation Units (Oxygen plants, Nitrogen plants, Argon plants) and Carbon dioxide plants. I am a plant manager and looking after all the activities involving in mafucturing and selling

I am Diploma Engineer in electrical and post diploma holder in Instrumentataion & control having 28 years experience in petro chemical, Heavy chemical , Oil & gas industries in a diffr\erent position in project, maintenance of instrumentation.

Instrumentation Automation Engineer 9+ Yrs Exp

Seeking very challengeable, risky and more responsible jobs to acquire a technical/management position where engineering experience and managerial skills will significantly contribute to product and process development

Control room operator, commissioning, precommissioning, plant start up, normal shut down, fire and gas, process, production, turbine.

Technical and sound Instrument engineer

15 years in the oil and gas industry including WesternGeco and Halliburton – Landmark Graphics Corporation. Areas of expertise include seismic data management, seismic and well data loading and conversion.

I am a Senior Instrumentation Technologist with 15+ years experience in the Instrumentation Engineering field; and I am well versed in project execution from FEED through to commission and start-up with a strong emphasis on efficiency and safety.

IT , Hysys,English language

Duties and Responsibilities:

Senior coatings/painting inspector

I am an Instrumentation and Control Engineer with a Doctorate Degree. I am experienced in designing and developing advanced controllers

Rotating equipment Engineer

QA/QC Inspection Engineer

Over Eight (8) years of total experience in Process Engineering which includes Basic Engineering, Detailed Engineering for Oil & Gas Offshore (fixed platform) & Onshore Processing Unit, Underground Gas Storage Facilities, Hydrogen Generation Unit, Naphtha Splitter Unit and Flow Assurance Study fo

Electrical commissioning technician / completions

I have spent 12 Years working as a DC Surveyor / Piping Designer in an onshore/offshore environment. Two of the main construction projects that I have been involved in was the BP Holstein and the Chevron Tahiti Spars. I have also spent a substantial amount of time working in petrochemical refineries

Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream, midstream and downstream activities in oil and gas industry.

Control System professional with 18 years experience and PMP and Six Sigma Green belt certified

Acting as QA/QC Manager/Cordinator (Welding, Inspection & NDT), with more 15 years of experience in the Middle East and European Union in the field of Oil & Gas and power piping projects. Experienced in work with multinational engineering companies (ALSTOM. TOTAL, KAVAERNOR¡K)

Experienced Instrumentation & Control system Engineer, interest in Projects, Proposals and Commissioning

Surface and Interfecial Sciences, Condensed Matter Physics, materials Sciences, UHV Techniques, Analytical Chemistry.

I have 12 years experience in drilling oil wells(development and exploration) and operation monitering. I have a bachelors degree in mechanical engineering.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out