Resume - Over 18 years of drilling and completion experience.

Misco Jobs

Resume #81623

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS
* Over 18 years of drilling and completion experience.
* Experience with land based drilling operations and familiar with HPHT, H2S wells
* Experience in drill string, casing, and cementing designs.
* A fluid expert, able to design and verify the mud systems during drilling.
* Experience in vertical, directional and horizontal oil and gas wells.
* Knowledge in geopressure and geomechanics analysis.

EDUCATION
Aug 2007-April 2008 SAIT- Polytechnic, Calgary, AB
Bachelor of Applied Technology in Petroleum Engineering

Sep 1981- May1986 University Polytechnic of Tirana Tirana, Albania
Bachelor of Science in Petroleum Engineering

WORK EXPERIENCE
2008 - 2009 Schlumberger Midland, TX
Drilling Engineer
* Prepared directional and horizontal well plans for the Permian Basin.
* Designed well plans to optimize and reduce Torturosity, and DDI (Directional Drilling Difficulty Index)
* Generated Anti-Collision reports including Traveling Cylinder plots, and Spider Plots.
* Designed BHA hydraulics to optimize Rotary Steerable performance, HSI, and hole cleaning.
* Monitored ECD (Equivalent circulating density) trend analysis, tripping load analysis, torque and drag, hole cleaning and vibration mitigation.
* Generated Plan versus Actual plots based on daily directional surveys.
2006 - 2007 Engineering Drilling Solutions Inc Calgary, AB
Mud Technologist
* Performed complete, accurate and timely well-site analysis of all drilling fluids parameters required by the company and/or the operator.
* Maintained accurate and timely maintenance of drilling fluids records such as: Mud Reports, Drilling Fluids Recaps, and other records and reports.
* Responsible for staying with the operator to solve any problems such as: Lost Circulation, Gas Kicks, Sever Chemical Contamination.

1991 –2003 Albpetrol Fier, Albania
Drilling Manager
* Managed projects and timing in a multi-disciplined environment including overall logistics from site-construction through hand-off to Production Group.
* Provided technical engineering support for drilling activity.
* Supervised all engineering preparation of drilling and completion designs, plans, cost, time estimates and reports to ensure that industry standards were met throughout all well designs.
* Wrote programs for re-entering existing wellbores to increase recovery from mature fields.
* Evaluated the effectiveness of drilling & related services to ensure company's health, safety and environmental objectives were met.

1986 –1991 Albpetrol Fier, Albania
Drilling Engineer
* Involved in all phases of drilling and workover engineering, including: drill string design, casing design, drilling fluids programs, and cementing programs.
* Monitored daily drilling operations and provided technical and engineering support to drilling operations for oil and gas wells with HPHT and H2S.
* Prepared cost estimates, AFE proposals and end of well reports.
* Predicted, detected and analyzed abnormal pore pressure by using seismic data and d–exponent method.
* Inspected wellhead, BOPs, and other equipment to ensure compliance with industry rules and regulations.

COMPUTER SKILLS
Proficient in Microsoft Word, Excel, Power Point, PEEP, AccuMap, Fekete Software (Well Testing, Field Notes), SAPHIR, and WellView database, Drilling Office, Perform Toolkit software.

CERTIFICATES AND INDUSTRY COURSES
First Line Supervisor's BOP Calgary 2009
H2S, CPR, WHMIS Calgary 2006
Directional Drilling Albpetrol Training Center 1993
Well Control Albpetrol Training Center 1992
Computer Training Albpetrol Training Center 1991

PROFESSION MEMBERSHIP
SPE Membership (Society Petroleum Engineering membership)
In process for APEGGA Membership

REFERENCES
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 7051)

Go to Search Parameters...

Brief Description

Experienced on preparing Engineering Design such as FEED preparation package and Detail Design preparation package including procurement and planning support activities and projects involves are TOTAL FPSO, Off- shore Facilities, On- shore gas plant, semi- conductor plant, pharmaceuticals plant.

Experienced engineer-seeking position in management

Mech.engineer/18 yrs exp /petrochemical/refinery/power plants (Maintenance/Projects(Piping/pipe line/equipments)/shutdown maintenance)

Over 18 years of drilling and completion experience.

I am an highly skilled and ethical professional seeking employment as a Lease Analyst or Division Order Analyst in any Oil and Gas industy. I have been in the Land dept. in oil and gas since 2005, I have a bachelor's degree in business and currently taking a course in Land Analyst Institute.

I have more than 18 years experience in engineering .I am confident that with my experience in project Design, Planning, Scheduling, I can make a significant contribution to your projects.

Extensive hands-on international and United States oil and gas industry experience focused in the full spectrum of Exploitation geology (Development and Production), from mapping and geocellular modeling through prospect generation, operations and reserves reconciliation. TX Lic. #1455

Inspection/Welding Engineer

20+ Years in Drilling, Sr. Drilling Engineer. Land & Offshore

B.E with nearly 17 Years Experience as an Instrumentation Engineer in Construction, Commissioning and Start up, Maintenance support in Power and Oil/Gas plants (On Shore and Offshore) Projects.

21 years in oil and gas industry in field operations

Mechanical Q.C. Engineer and Safety Engineer in Construction, Consultancy.

Project Engineer

civil inspector, site manager, civil engineer

DCS engineering experience : HoneyWell DCS Experion C300 / C200 / TDC2000 / TDC3000 : over 8 year experience in Oil and Gas field in Canada: Revamping and Commissioning at site, and Testing: Another 10 years PLC experience.

Has 18 years + eexp in field of Automation and control and 7 years Middleast experience Previously employed with ABB and Invensys UAE .

Mechanical Engineer/Supervisor(rotating machinery)

Extensive experience of combined domestic and international on well logging industry

Results oriented Senior Piping Designer with experience in managing project scopes, costs, and schedules for numerous small to medium size projects.

Automation Engineer with a Instrument and controls background who has installed and commissioned various DCS Systems worldwide,currently working as a C&I Specialist in the middle east as a client rep. on site acceptance of Control,ESD and Fire & Gas systems.

Process Engineering Opportunity

Dynamic Positioning Control System Specialist

More than 15 years experience in instrumentation, process control, control system (PLC / DCS) and automation (SCADA) design, programming, commissioning and startup, and maintenance. Completed a large variety of the projects in energy, oil & gas, petrochemical process, and water treatment.

Sr Subsea Controls Consultant

A Post Graduate (M.Tech. – Electrical) after Engineering (B.E. – Electronics & Communications), supplemented with training on Project Management having total experience of over 28 years, including initial 20 years in Indian Navy and later 8 years in Project design for Utilities, Oil & Gas, Process

Petroleum Engineer, Safety Specialist.Managing, Administering, and Operating Safety and Environmental Health (HSE) programs. * Management/Budgeting. * Supervision. * Team Leadership. HSE/Strategic Planning and Program Development.

I have an extensive experience in detail design and stress analysis of piping and pipeline system for Oil and Gas Project for more than 18 years. I am familiar with International Code and Standards, EPC Company standard, and Major Oil Company Standard.

Pipe stress engineer

Currently a Senior Reservoir Engineer working with an Oil/Gas Major in Lagos Nigeria. I have had various trainings, both through formal courses and on the job. I worked in a studies team in Aberdeen, basically undertaking studies of hydrocarbon fields.

Over 46 years international experience in IT-Enabled EPC projects for onshore/offshore oil and gas, pipeline, petrochemical, chemical process and cryogenic plants, thermal power including cogeneration plants, refineries, iron and steel, pharmaceutical and other industrial plant construction.

Duties & Responsibilities in different Oil & Gas Operator Companies :

16 years of continuous experience in various field of construction in Oil & Gas, Petro Chemical Plants, Manufacturing Plants, Buildings and Infrastructure as a Lead Field Control Engineer, familiarized & having experience to different kind of works of a Planning Engineer, Schedule Engineer, Cost Con

Inspection in the field of Electrical & Instrumentation Works

Passed in diploma instrument & conrtol skills in dcs system and manage/conrol our staff

Automation, Control, Electrical, Instrument, SCADA Engineer - 30+ years experience

PDMS Piping/Mechanical Designer

20+ Years piping designer

Working for Petrofac International as Commissioning Engineer

Senior process engineer

Marine chief engineer and technical superintendent onshoreGood team player with excellent organization and motivation skills

I have 14 years experience in Piping Design and 5 years in PDMS piping design. I have been responsible for job packages start to finish, Isometric extraction, material extraction, survey & field investigation, P&ID changes, working with PDMS, all versions of Autocad, Microstation, and Cadworx

A Mechanical engineer with 17 years experience in marine,mechanical, hydraulics, pneumatics, electrical, elctronics engineer, Presently working as a hydraualic engineer in bosch rexroth, United Arab Emirates.

Materials Science and Mechanical Engineering, Solid lab skills in materials testing and examination, Failure analysis to determine the root cause. +10 years manufacturing & energy industry experience. Strong Computer skills-Stress analysis, Numerical simulation. Multi-languages

Eighteen years of combined experience in the petrochemical/petroleum and aerospace industries working for engineering contractors and operating companies. Experience with project management, project development, construction engineering, equipment maintenance/reliability, design, cost estimating.

15+ years of experience

Register Mechanical Engineer & certified 3.1 Welding Inspector.Speak , write, read english fluently.Well-versed in computer & different codes & standard like ASW,ASME,API & BS.Good knowledge of AUTO CAD & engineering drawings.

ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING, FIELD SERVICE, SUPERVISION

Petroleum engineering professional with diversified domestic USA and international experience in E&P

Senior Instrument , Electrical, Rotation, Engineer, Project Management

Highly experienced in dealing with Engineering, Project and Procurement coordination for Static equipments and Packages. Experienced in EPC,PMC,FEED and Study type of jobs and well versed with renowned Codes and Owner Company Standards. For further details, please refer my CV attached.

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out