Resume - E & I Technician

Misco Jobs

Resume #81635

CONTACT INFORMATION:
View contact information...

Position Applied: Electrical and Instrument Technician

Educational Attainments:

B.S. Electronics and Communication Engineering (Graduate, March 2008)
Technological Institute of the Philippines ¡V Quezon City (TIP-QC)
938 Aurora Boulevard, Cubao, Quezon City, Philippines

B.S. Electronics and Communication Engineering (4th year college, 1998-2001)
Mapua Institute of Technology
Intramuros, Manila, Philippines

Work Experiences:

Company: Self Employed
Position Held: Electrical and Instrument Service Technician
Date: October 2008 up to present 2009

Duties and Responsibilities:
* Perform installation and wiring. Repair of booster pump for pressure switch and level switch, pump motors, lighting & small power circuits, motor starter, and control panel.

Company: EMEC / Electromechanical Engineering Company
Project Title: Power Plant Angat Dam Bulacan
Position Held: Electrical and Instrument Technician
Date: January 05 2006 - August 17, 2008

Duties and Responsibilities:
* Completion of discipline pre-commissioning works in line with project.
* Check malfunction of instrument and repair, loop checks and investigate cable defects. Check also control panel of motors.
* Witnesses and inspection test / ensure compliance with the quality system.
* Install, troubleshoot, clean, inspect, calibrate, and maintain electrical, instrumentation, and distributive control equipment throughout the facility safely and professionally.
* Performs electrical preventive, repair, and calibration maintenance procedures safely and professionally with minimal supervision.
* Ability to read & interpret schematic diagram.

Company: S.A.KENTZ / Saudi Arabia Kentz Company
Project Title: Petrochemical Plant Olefins Expansion Project / Beri Gas Plant Aramco
Project Jubail Saudi Arabia
Position Held: Electrical and Instrument Technician
Date: August 3, 2003-November 8, 2005

Duties and Responsibilities:
* Preparing commissioning work package for ongoing commissioning stage.
* Compilation and final submission of commissioning work package/dossiers to Client.
* Performs quality checks as required using the most current documentation and record.
* Install instruments, calibration of variety transmitters, pressure, flow temperature and level. Loop check and pre-commissioning.
* Have working knowledge in MCC's power distribution, motor protection and relay's.
* Competent of reading and using P&ID, logic diagrams, loop diagram and schematic diagram. Knowledge using of MTE measuring test equipment.
* Familiar in working in (DCS) distributed control system, (PLC) programmable logic control, and (F&G) fire and gas detection equipment.
* Involves in mechanical completion inspection and punch listing.

Company: Ciper Engineering Electrical Contractor's Company
Project Title: Commercial Building and Industrial Plant
Position Held: Electrical and Instrument Technician
Date: July 5, 1999-June 28, 2003

Duties and Responsibilities:
* Perform installation in commercial building and industrial plant.
* Doing cable laying, EMT conduit, PVC conduit and cable tray, flexible and armoured cable. Termination in distribution board, control panel and smoke detector P.A, public address. Repair and trouble shooting of motors control.

In-Service Training and Seminars Attended:

Industrial Process Controls
Meralco Foundation Institute PAB Accredited ISO 9001:2000 Certification
Ortigas, Pasig City, Philippines

Calibration for Process Instrumentation
Meralco Foundation Institute PAB Accredited ISO 9001:2000 Certification
Ortigas, Pasig City, Philippines

Industrial Electrician
Meralco Foundation Institute PAB Accredited ISO 9001:2000 Certification
Ortigas, Pasig City, Philippines

Programmable Logic Controls
Siemens Logic Module
Technological Insitute of the Philippines ¡V Quezon City
938 Aurora Boulevard, Cubao
Quezon City, Philippines

Seminar and Hands-On Workshop
Basic Electronics
Technological Insitute of the Philippines ¡V Quezon City
938 Aurora Boulevard, Cubao
Quezon City, Philippines

Free Space Optics Technology
Technological Insitute of the Philippines ¡V Quezon City
938 Aurora Boulevard, Cubao
Quezon City, Philippines

IC Manufacturing Processes
Technological Insitute of the Philippines ¡V Quezon City
938 Aurora Boulevard, Cubao
Quezon City, Philippines

SECES Team Building and Leadership Training
Society of Electronics and Communications Engineering Student
C.J. Gomez Private Resort
San Jose, Montalban
Rizal, Philippines

IECEP Leadership Training and Seminar
Instute of Electronics Engineers of the Philippines
Expanded Metro Manila Student Chapter
Tagaytay City, Philippines

Microwave Radio Systems Design
Technological Insitute of the Philippines ¡V Quezon City
938 Aurora Boulevard, Cubao
Quezon City, Philippines

Point to Multipoint Systems
Technological Insitute of the Philippines ¡V Quezon City
938 Aurora Boulevard, Cubao
Quezon City, Philippines

High Definition Television
Technological Insitute of the Philippines ¡V Quezon City
938 Aurora Boulevard, Cubao
Quezon City, Philippines

Digital Television
Technological Insitute of the Philippines ¡V Quezon City
938 Aurora Boulevard, Cubao
Quezon City, Philippines

IECEP Leadership Training and Seminar
Instute of Electronics Engineers of the Philippines
Expanded Metro Manila Student Chapter
Paraiso Beach and Pool Resort, Sariaya
Quezon, Philippines

Computer Aided Design II
Mapua Institute of Technology
Continuing Education Program
Intramuros, Manila
Manila, Philippines

Basic Computer Aided Design
Mapua Institute of Technology
Continuing Education Program
Intramuros, Manila
Manila, Philippines

Technical Abilities and Competency Listings:

„X Effective analytical and problem solving skills
„X High level skills with Microsoft office
„X Knowledge in AUTOCAD I, II and 2008
„X Planning & Designing
„X Excellent communication skills.
„X Proficient in Windows Server 2003/2000. Microsoft Office 2003/MS Office2000/XP, and Windows Vista. Internet Explorer 6.6/7.0. Adobe Photoshop, Macromedia Flash MX
„X Basic PC troubleshooting and Computer Networking
„X Good social skills
„X Ability to meet tight deadlines
„X Ability to work as team and exhibit objectivity in building team spirit.

Awards Received:

Department of Science and Technology Scholarship (R.A. 7687) June 1998
Career Service Sub-professional passer with GWA of 84.23

Affiliations of Electronics and Communications Engineers

Institute of Electronics Engineers of the Philippines
Public Relations Officer
Expanded Metro Manila Student Chapter

Society of Electronics and Communications Engineering Student
Public Relations Officer ¡V External
Technological Institute of the Philippines ¡V Quezon City

Personal Information:
Age: 27 Date of Birth: May 24, 1981
Civil Status: Single Languages Spoken: English and Tagalog

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 7051)

Go to Search Parameters...

Brief Description

Sincere and hardworking with good communication and interpersonal skill looking for some challenging assignment

Piping Designer with PDS, Rebis Autoplant, Plantspace, Microstation, AutoCad and ProCad experience.

E & I Technician

i am an fabrication enginner working with saudi aramco gas oil seperation project as a approved qa qc mechanical supervisor since june 2007

Automation, Instrument and Control Engineer Manager

I have B.S in Mechanical Engineering from Bushehr University in IRAN and I have more than 8 years of experience in Oil&Gas field and Power Plant companies, especially in piping division.

B.Sc.(Engineering) Metallurgy and Materials Science.

Certified Cost Engineer. Graduate Mechanical Engineer with over Eighteen Years experience in preparing Project Cost Proposals / Tendering including Estimation / Quantity Survey, Costing and all related activities. Completed Eleven Years in Gulf (Bahrain).

Fifteen years experience in the area of Seismic Data Processing including 2D and 3D land, transition zone, marine and OBC processing. Specialized areas including demultiple applications, imaging techniques, and Amplitude versus offset.

7-year offshore structural engineer with M.S degree

power system protection engineer with avery good experiance in protective relays testing control scheme troublshooting

Instrument Supervisor

Project Planner/Scheduler (Primavera P3 & MS Project Planning Software, MS Word / Excel). Vast experience in Steel Works Business - Planning, Fabrication / Erection (Storage Tanks & Steel Structures), Gas Plant / Pipelines. Completed Structural Engineering and 4 years in BS Mech'l Engineering.

Maintenance supervisor / Reliability specialist / Project Management

Broad base of experience within the Pulp/Paper, Pharmaceutical/Chemical and Bio-Technology industries involving design, engineering, construction, and commissioning. Management of projects (automation, instrumentation and electrical/instrumentation systems), quality, personnel and resources.

Developing & producing plot plans using PDMS 11.2 (CLS), pipe modelling (PDMS-PMS), Equipment modelling (PDMS-EMS), producing Piping Study & General Arrangement Drawings(PDMS-CAST), Producing Isometrics(Isodraft) & used Review Reality station for reviewing the plant model.

Certified ( Project Controls, AACE, #1366), published Engineer (BSPE and MBA) with over 15 years of direct field experience in Operations, budget design, Inventory control, Drilling Engineering, Oil Well Fire Control, Well design and Turnkey Bid estimates.

Education: Master in Chemistry Various certifications on Drilling Technology and Oil and Gas operations. Worked as Mud Engineer with MI Overseas. BakerHughes INREQ and IDF schlumberger in middle east. Worked as lab chemist with QGPC Qater, Mud Engineer with ADC Saudi Arabia ETC

Pr. Management-Estimating man hours, developing WBS CBS, Progress measurement techniques, monitoring by Primavera, project control, invoicing. Engineering-Prep. basic Instr data sheet, detailed ENGINEERING of DCS, FGS, SDS, control logic, SAFE. Commissioning -Elect system of process platforms

I am experienced in long & short range mine planning, scheduling, budgeting, design of safety procedures & standards, production & destress blasting, mine backfill, ventilation, ground control, geomechanics modeling & design of stable openings (using the bifurcation theory in mechanics).

Senior controls and Scada Systems Analyst

Mechanical Engineer Bsc. Hons. Project Engineer. Commissioning Engineer

Directional Driller with horizontal experience in shale and lime. Also have workover and completion experience,

Piping Stress Engineer

Registered civil engineer with Master’s degrees and 5 years of work experience primarily in structural design

Experience on process design of oil and gas industry units, engineering and tender documents preparation. Well familiar with process codes and standards and design requirements

Piping Engineer

Programming/maintenance of PLC/DCS controllers and SCADA systems. Maintenance of electrical/electronic and pneumatic/hydraulic instrument equipment. Maintenance of fire/gas detection systems (turbines, oil/gas production facilities). Excellent communication and management skills.

I am experienced in Air separation Units (Oxygen plants, Nitrogen plants, Argon plants) and Carbon dioxide plants. I am a plant manager and looking after all the activities involving in mafucturing and selling

I am Diploma Engineer in electrical and post diploma holder in Instrumentataion & control having 28 years experience in petro chemical, Heavy chemical , Oil & gas industries in a diffr\erent position in project, maintenance of instrumentation.

Instrumentation Automation Engineer 9+ Yrs Exp

Seeking very challengeable, risky and more responsible jobs to acquire a technical/management position where engineering experience and managerial skills will significantly contribute to product and process development

Control room operator, commissioning, precommissioning, plant start up, normal shut down, fire and gas, process, production, turbine.

Technical and sound Instrument engineer

15 years in the oil and gas industry including WesternGeco and Halliburton – Landmark Graphics Corporation. Areas of expertise include seismic data management, seismic and well data loading and conversion.

I am a Senior Instrumentation Technologist with 15+ years experience in the Instrumentation Engineering field; and I am well versed in project execution from FEED through to commission and start-up with a strong emphasis on efficiency and safety.

IT , Hysys,English language

Duties and Responsibilities:

Senior coatings/painting inspector

I am an Instrumentation and Control Engineer with a Doctorate Degree. I am experienced in designing and developing advanced controllers

Rotating equipment Engineer

QA/QC Inspection Engineer

Over Eight (8) years of total experience in Process Engineering which includes Basic Engineering, Detailed Engineering for Oil & Gas Offshore (fixed platform) & Onshore Processing Unit, Underground Gas Storage Facilities, Hydrogen Generation Unit, Naphtha Splitter Unit and Flow Assurance Study fo

Electrical commissioning technician / completions

I have spent 12 Years working as a DC Surveyor / Piping Designer in an onshore/offshore environment. Two of the main construction projects that I have been involved in was the BP Holstein and the Chevron Tahiti Spars. I have also spent a substantial amount of time working in petrochemical refineries

Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream, midstream and downstream activities in oil and gas industry.

Control System professional with 18 years experience and PMP and Six Sigma Green belt certified

Acting as QA/QC Manager/Cordinator (Welding, Inspection & NDT), with more 15 years of experience in the Middle East and European Union in the field of Oil & Gas and power piping projects. Experienced in work with multinational engineering companies (ALSTOM. TOTAL, KAVAERNOR¡K)

Experienced Instrumentation & Control system Engineer, interest in Projects, Proposals and Commissioning

Surface and Interfecial Sciences, Condensed Matter Physics, materials Sciences, UHV Techniques, Analytical Chemistry.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out