Resume - I am Mech Engg post graduate(Prodn Engg). I have experience in using CAE package...

Misco Jobs

Resume #81637

CONTACT INFORMATION:
View contact information...

Areas of excellence
- FEA Modeling and analysis using packages Hypermesh, Ansa & Nastran.
- Software using C,C++, Oracle 7.3, VB, Java

Objective:
Pursuing a challenging career in Modeling and Analysis of versatile components based on client's requirements. I would like to improve my knowledge and be in the forefront in CAE domain.

Feb 2009 –
Till date
Receiving training as functional specialist in Endeavour technologies, Hyderabad in SAP Plant maintenance module.

Mar 2000 –Jan 2009
Worked as Project engineer (CAE), In Wipro Technologies Ltd, Madhapur, Hyderabad.

Summary
1. Making time estimation of the finite element modeling projects.
2. Executing the project with team members.
3. Doing fatigue, static or free free modal run in Nastran based on the client's requirement.
4. Conducting audit of the projects.

Projects Handled – Hypermesh and NASTRAN:
Fatigue analysis of 53 teeth bicycle sprocket using Hypermesh and Nastran.
The client supplied us with Sprocket and cross arm geometry. He had provided us with tangential and radial loads that were to be applied on the teeth for two different cases. Second order Tetra meshing was done in Hypermesh for both sprocket and cross arm. The sprocket was connected to cross arm by using RBE2 elements. Constraint was applied on the rigid at the center of the cross arm. Local coordinate systems were created for each teeth to apply tangential and radial loads. Two different load collectors were created for tangential and radial loads. Load steps were created for different cases.. Subcases were created giving using load collector and constraint collector. Control cards were selected with solver 101.This was solved in Nastran and stresses, displacements were viewed in Hyperworks. Vonmises stress, max principal stress, minimum principal stresses are noted. From these values the Goodman fatigue index was calculated to determine the fatigue life of the component.
Finite element modeling of defroster assembly for Visteon in Ansa
The geometry cleanup or Topology was done for all the components in defroster model to remove the single and Triple edges. The front portion near the grills was made fine about 1.5mm and the rest of the regions were captured with 3 mm mesh.

Projects Handled – Hypermesh 7.0:

Finite element modeling of Transmission components for Nissan Jatco Japan.
The Finite Element Modeling of Transmission,Housing,Extension was done using Tria elements of 10mm size..Tetras were generated for each of these independently. Then different combinations of extensions and housings were used to evaluate the stress results in Nastran.

Finite element modelling of Global tetra models
Successfully executed Global Head & Block Tetra Model with the required tetra element node count as per the client requirement for thermal analysis. The client GMP supplied us with one single geometry file containing all the components. This geometry was segregated initially into individual collectors like water jacket, oil, outer surface, head deck face, oil pan gasket face, combustion chamber, intake port, exhaust port etc based on head or the block. Each collector was meshed individually maintaining their respective sizes. For water jacket 8-10 mm mesh was used. For outer surface 10-12 mm mesh was used.

Finite element submodeling of Engine block & head submodels.
I have successfully executed Submodeling of Engine Block and Head Tetra models for GMP as per their guidelines. Here the sizes of the components are less compared to the global models. The Water_Jacket is meshed with 3-4 mm, Outer surface is meshed with 5-6mm to achieve the desired node count.

Finite element NVH modeling of Engine block, head, intake and exhaust manifolds.
I have done the NVH Modeling of Engine block, head Intake, exhaust manifolds. In this modeling a very big size of mesh of about 15-20 mm was used.

Normal Mode Analysis on seat Assembly
Modeling of JCI seating system was done. The natural frequency of the mechanism was obtained using Normal Mode Analysis of Nastran.

Finite element modeling of Seating system for JCI
FE modeling of seating system was carried out for seat subassemblies including recliner brackets, rear hook, front hook, riser beam, torsion bar, mounting bracket, rear hook mechanism, front cross member, side cross member, upper internal bracket,upper end bracket and back panel using Hypermesh.

Finite element Modeling of DVD Player for HJCI
FE shell Modeling of DVD Player parts, brackets, dog-house was carried out using Hypermesh.

Finite element modeling of wheel rim and brackets by solid Meshing for PAULSTRA, AMCAST.
Finite element solid (3D) modeling of wheel rim and brackets was done for PAULSTRA and AMCAST using Hypermesh.

Finite element modeling of engine block,brackets and body for VISTEON
Finite element modeling of engine block,body, brackets and other components was carried out using tetramesh option in Hypermesh.

Finite element modeling and analysis of Parking Brake
The modeling of the Parking Brake assembly was done using Hypermesh. Analysis was done for different load positions.

Finite element modeling of door for CADFORM
Finite element shell modeling of all the door components of CADFORM was done using Hypermesh..

Finite element modeling for MAGNA,DURA,EDSCHA,HG
Finite element modeling of components for subassemblies like wiper assembly etc was done for MAGNA, DURA, EDSCHA, HG using Hypermesh.

Feb 1999 to
Feb 2000 Kwik Systems ltd, R.K.Nagar, Malkajgiri, Hyderabad
Worked as software developer in designing hospital management software in Java.

Feb 1998 to Jan 1999 Hindustan Machine Tools Ltd (A Govt of India Enterprise) Balanagar, Hyderabad
Worked as Graduate Apprentice Engineer and received training in CNC machining,Process planning, Tool design and maintenance departments.

Aug 1996 to Jan 1998

T.A.Hydraulics Ltd. No.59, C.I.E, Gandhinagar, Balanagar, Hyderabad.

Worked as Quality Control Engineer in the manufacturing of Hydraulic components like adaptors, sleeves, nipples. I was involved in process planning and executing them on the CNC machines like STC10 and Econo CNC26.

Education:M.E (Production Engineering) from Osmania University, Hyderabad,India. July 2007.

B.E (Mechanical Engineering) from CBIT, affiliated to Osmania University,1996,Hyderabad,India

Technical Skills:
Mechanical Software's
Hypermesh V 8.0,Ansa v 12.1.0,Nastran
Received Training in Tgrid v 368

General Software
C,C++,Oracle, VB,Java.
Plat forms Worked DOS,WINDOWS,UNIX

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 6997)

Go to Search Parameters...

Brief Description

Over ten years of experience in the design, troubleshooting, maintenance and optimisation of new and existing facilities including sweet and sour natural gas plants, oil batteries, water injection, water treatment and chemical plants.

This letter is to express my interest for a Senior position in oil & gas Exploration. Based on my skills in Geology and oil and gas Exploration and New Ventures, Experienced Geoscientist, Explorationist and new ventures activities; PhD graduated In Geology (1991), bachelor (structural geology).

Electrician - Canadian journeymen , Instrument Technician - Canadian certification,10 years Supervisory, Startup and commissioning expert. Offshore FPU FSO. PLC Expert/ DCS, Experenced Trainer. High Voltage, protection relay testing, Valve repair, Work exp. in Canada, Libya. Indonesia.

I have over 32 years in the Coatings industry, 22 years as a Coatings Inspector (British Gas/CSWIP BG57012), with 14 years as a Coatings Advisor to ExxonMobil Nigeria. My duties For Exxonmobile included Inspection of all onshore and offshore facilities also new construction projects. Other duties in

Senior Piping Designer

25+ years experience in piping design of power plant,refinery, and chemical plant exoeriences. Field experience included.

QA/QC NDT and RT Interpreter Coordinator 5 Years QA/QC Welding and Fabricating Inspector Lev 2 8 Years Welding Instructor /Team Leader 3 Years Supervisor/ Superintendent / Piping-Mechanical-Structural 7 years

Electrical Design, Drafting, Construction and Procurement

Autocad, microstation, frameworks 2-d and 3-d cad structural designer

Quantity Surveyor - Estimator for Oil and Gas, Petrochemical, Hydro Power Plant, Fabrication Shop, 24 yrs. exp.

Sr.PDS/PDMS Piping Design Engineer/Designer / PDS Administrator /Lead piping Engineer/Designer.

Project / Engineering of facilities for the domestic and international oil and gas industry with emphasis on Structural and Foundation Engineering. Strong knowledge of processing, and construction of platforms, pipelines, platform drilling /workover rigs, etc.

Fifteen years of experience in Refinery, Oil & Gas and Petrochemicals field as a Piping designer in producing plot plans, Equipment Layout, Piping General Arrangement Dwgs, Piping isometrics, Jacketed piping isometrics, M.T.O., Stress isometrics, Sketches, Nozzle orientation and as-built Drawing on

chemical engineer in pakistan steel mills

I am an IRCA (UK) Registered QMS 2000 Lead Auditor, currently working QA/QC Manager with an EPC Company for Yemen LNG Project, Balhaf site, Yemen.

Petroleum Engineer with extensive experience in Drilling, Operations, Drilling Management. Trained in: Offshore, Onshore, Inland-waters. HTHP wells, Gas wells, Horizontal drilling.

Engineering professional with 17+ years of experience within diverse oil, gas field, refinery and petrochemical industrial arenas. Expert level engineer for instrumentation and control disciplines.

Reliability / Maintenance / Rotating Equipment Engineer with 20+ years of experience in Oil / Gas / Petrochemical / Utility industries.

Over 13 years of solid experience in piping stress/pds design for Refineries,petrochemicals,fpso&power projects.

Saudi Aramco Approved Vendor Inspector SAP No. 70004827, Certified API-510, Cswip 3.1, NDT Level2, ISO 9001.

13 years oil industry experience,• Drill wells up to 6500 mt, High temperature gas wells, drilling of horizontal multi-lateral hole, sidetracks, H2S Environment,Run 5 1/2" expandable liner & Run 4 1/2" completion assy., with 4 1/2" liner cemented off bottom

Mechanical engineer graduated in 1991 from Damascus university (machinery department)since that date (15 years experience in oil and gas industry in onshore and offshore)I have been in several companies(SPC,SCOT,Alfurat petroleum co with SHELL in their gas plant.

20 years experience in process and laboratory analyzers in refinery and Petrochemicals operations world wide. Graduate degree in analytical chemistry. Willing to relocate.

Sr. Civil Structural Designer

Working as Well Site Geologist for Oil Field Instrumentation, India. Our client is MEDCO international an Indonesian company. Presently I am working in Oman. I have worked in the following fields of Oman: Simsim, Warad, Basma and Irad.

CAREER SUMMARY : Vast experience in the field of industrial piping, i.e. petrochemicals, fertilizer, synthetic fiber, refinery, polyester and pharmaceuticals industries. Main responsibilities includes - model review, piping designing, supports, drawings checking, site survey and coordination.

My career objectives, strengths and experience in the workforce I am a skilled, experienced and respected heavy equipment mechanic with substantial experience onshore & offshore Australia and overseas particularly here in Asia.

Able to make piping design from conceptual to detail design and field engineering work( see career summary on my resume)

CATIA V5 (1600 Hours), Kaizen/Kanban - Continuous Production Improvement, Lean Manufacturing/Six Sigma, Microsoft Office Systems

QA/QC Engineer-International projects-Oil&gas industry

I have 14.5 years of experience in the field of instrumentation/control system engineering for Oil/Gas industry. I have served with Reliance Industries Limited (A Indian largest Oil/Gas/Petrochemical Company ) & and SABIC (A Saudi Arabia largest Oil/Gas/Petrochemical Company).

More than 15 years of comprehensive knowledge and experience in the field of electrical and instrumentation engineering. Over 12 years of involvement in inspection and construction of Oil & Gas, Petrochemical, and Utilities Plants. Have good knowledge in implementation of SHELL DEP (Design and Engin

Analyst/Technical Assistance for reservoir/production operations

Vast experience in Well and Reservoir Surveillance, Integrated Reservoir Studies, Integrated Production Systems Modeling, Well Optimization Production Engineering and Hydrocarbon Accounting. Proven record of accomplishments in deepwater production operations in the U.S. and West Africa

Electrical Engineer

Twenty-Eight(28) years of progressive experience in Piping Design with function relevant to all aspects of Font End Engineering and Design, Plant Layouts, Piping Layouts, Isometrics, Material Take Off, Stress Analysis, Procurement and Preparation of Specifications, Plant Modifications, etc.

Over 13 years piping stress and mechanical engineering experience with EPC companies in Sinopec, China, Fluor Canada and Jacobs Canada

Having substantial knowledge and experience (14 years) in Piping/Mechanical engineering, especially in the Piping Engineering and Design. Involved in industrial plant, petrochemical. Expert in PDMS, including Design, Draft, Isodraft and ability to design and drafting Pipe support using MDS

Under Ground Piping Specialist

Accomplished petroleum exploration and production manager of people and projects. Proven broad-based experience in multi-disciplinary exploitation of petroleum reserves, evaluation work in acquisition and divestitures, information technology and project management.

A Civil/Structural Engineer having 14+ years of Consultancy experience in Structural Design and Project Management for Process, Oil & Gas and Power & Energy Projects. I have good knowledge and experience of Canadian, British, Indian, American & various Process industry standards.

Control System engineer with more than 14 years of experience with Yokogawa Systems Engineering

Electrical & Instrumentation Engineer experienced in Testing & Commissioning Instruments in FPSO, Installation of Electrical services in the Power plants (Gas turbine, Hydro, Steam turbine), Commercial Buildings, MRT and Commissioning of Process Control System in Water Treatment Plant.

APPLICATION FOR THE POST OF BLASTING AND PAINTING SUPERINTENDENT

I have different skills from farming to superivor to general labor skills inthe oil and gas industary.amd also I have some sales experance

Lead Drilling Fluids Engineer / Mud Engineer / Drilling fluids specilalist/ Mud Manager/Drilling Supervisor/ Drilling Engineer

I am Mech Engg post graduate(Prodn Engg). I have experience in using CAE packages Hypermesh,Ansa and Nastran and performing static ,Normal mode and fatigue analysis

28 years experience with industrial design drafting work. Assignments have involved equipment layouts, P&ID development, material take-offs, estimating, checking and field work in addition to developing construction drawings and fabrication isometrics.

Electrical Technician with 20 years experience in the oil and gas industry.

A total of 10+ years experience in Pipe Stress Engineering and Mechanical Stress Analysis in

First 1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out