Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #81641 next resume »»
CONTACT INFORMATION:
View contact information...

OBJECTIVE
Reservoir engineer specialized in simulation

WORK EXPERIENCE
Reservoir simulation software support at Schlumberger Information Solution, Houston, TX, USA, 2007 – present.
* Provided technical support for clients who have various problems in using ECLIPSE and Petrel RE, such as the Coal Bed Methane Model, the polymer flood model, the asphaltene option, LGR, multi-segment wells, the network options, gas lift, compositional simulation, CO2 storage, CO2 flood, endpoint scaling, tracer tracking, licensing issue, convergence issue, parallel option, flexible and fast restart, dual porosity and dual permeability model.
* Investigated ECLIPSE and Petrel RE to confirm any defect and deficiency that clients complained
* Made workflows and documented solutions for FAQs in using ECLIPSE and Petrel RE
* Collected feedback from clients for improvement of ECLIPSE and Petrel RE
* Identified business opportunities, such as consultancy, selling licenses, and providing trainings
* Assisted in teaching a training course regarding how to make a black oil simulation by using ECLIPSE
* Written technical articles for Schlumberger's technical journal, "The Click", to address certain techniques in using ECLIPSE software package and Petrel RE
* Cooperated with geologist in building 3 D models by using Petrel
Research assistant, Petroleum Engineering Department, UAF, Fairbanks, USA, Sep. 2005 – May, 2007.
* Performed research in compositional simulation of viscosity reduction EOR method on the Schrader Bluff Reservoirs
Research Assistant, Hydrology and Climate Change, UAF, Fairbanks, USA, Sep. 2001 – Aug. 2005.
* Performed research in arctic water resources and climate changes
Research Assistant, Cold and Arid Regions Environmental and Engineering Research Institute of Chinese Academy of Sciences, Lanzhou, China, Sep. 1997 – Aug. 2001.
* Performed research in using ice core to recover information of environmental and climatic changes
* Performed ice core drilling on the glacier of Mount. Everest at the altitude of 6500m above sea level in the summer of 1998
Instrumental Analyst in product quality, Henan Petroleum and Chemistry Department, Zhengzhou, China, Jul. 1996 – Aug. 1997.
EDUCATION
Master of Science, Petroleum Engineering, University of Alaska Fairbanks, Sep. 2005 – May 2007
Overall GPA: 4.0
Thesis Title: Compositional Simulation of a Viscosity Reduction Enhanced Oil Recovery Method for Schrader Bluff Heavy Oil Reservoir
Relevant Coursework:

* Applied Petroleum Reservoir Engineering
* Petroleum Production Engineering
* Advanced Phase Behavior
* Non-Newtonian Fluid Mechanics
* Waterflooding
* Advanced Petroleum Economic Analyses
* Reservoir Geology for Petroleum Engineers
* Drilling Engineering

Master of Science, Hydrology and Water Resources, University of Alaska Fairbanks, Sep. 2001 – Dec. 2004
Overall GPA: 3.25
Thesis Title: Siberian Lena River Thermal Regimes and Changes
Ph.D. Student, Cold and Arid Regions Environmental and Engineering Institute of Chinese Academy of Sciences, Lanzhou, China, Sep. 2000 – Aug. 2001, (terminated and then came to U.S.A. in pursuit of graduate studies)
Master of Science, Cold and Arid Regions Environmental and Engineering Institute of Chinese Academy of Sciences, Lanzhou, China, Sep. 1997 – Aug. 2000,
Overall GPA: 3.5
Thesis Title: The Study on Surface Chemistry of the Mineral Dust in Snow and Ice
Bachelor of Science, Chemistry, Zhengzhou University, Zhengzhou, China, Sep. 1992 – Jul. 1996.
SIMULATION SOFTWARE SKILLS
Proficient in using ECLIPSE reservoir simulation software package: ECLIPSE 100 (black oil simulation), E300 (compositional simulation), FrontSim, OFFICE, FLOVIZ, SCHEDULE, VFPi, PVTi, and also Petrel RE
Proficient in using OFM and PipeSim
Familiar with CMG WinProp, GEM, and Builder (used for completing thesis)
TECHNICAL TRAINING
Schlumberger's training in reservoir simulation with ECLIPSE software package and Petrel RE.
Schlumberger's training in teaching and making presentations
PVT tests at the Intertek Westport Technology Center, Mar. 13-17, 2006.

PUBLICATIONS
Yang D., B. Liu, B. Ye, 2005. Stream temperature changes over Lena River Basin in Siberia, Geophys. Res. Lett., 32, L05401, doi:10.1029/2004GL021568
Liu, B., D. Yang, B. Ye, S. Berezovskaya, 2005. Long-term open-water season stream temperature variations and changes over Lena River Basin in Siberia, Global and Planetary Change, doi: 10.1016/j.gloplacha.2004.12.007

WORK STATUS
United States permanent resident

REFERENCE
Will be provided

View contact information...
«« previous resume next resume »»
Search Results (Resumes 2301 to 2350 of 7051)Go to Search Parameters...
Brief Description
POLYTECHNIC INSTITUTE OF BUCHAREST, FACULTY OF AIRCRAFT ENGINEERING-MECHANICAL ENGINEER-HIGH DEGREE GRADUATE
skills and experience in appointments ranging from QC Inspector, to QC Engineer in the field of Oil and Gas as a ME
Fifteen years of diversified process and mechanical engineering experience in oil and gas offshore/ onshore facilities. Selection of key process technologies, key issues from reservoir, drilling, top side to production optim & simulation
Feasibility studies, basic and detailed engineering, cost estimates; Process Flow Diagrams (PFD’s) including mass & heat balances; Process and Instrumentation Diagrams (P&ID’s) including line sizing, equipment specifications; HAZOP participant, Vendor inspections, commissioning & start-up assistance
I have 12 years experience in Automation(DCS & PLC). I also worked as project management.
I am a Mechanical engineer with twelve years of experience. I am responsible for the execution of maintenance of rotary &stationary equipments in petrochemical Industry, spares planning, manpower planning and contract fixing etc
For the past 15 years my career in the field of Inspecting with BHEL and ARAMCO has focused onshore oil and gas production operations and construction of Petrochemical Plant, Power Plant, and LNG storage tank in India and Middle East.
Integrated Drilling Evaluation and Logging system, integrated down hole directional drilling, drilling mechanics and petrophysical data measured within few feet of the bit and transmitted to the surface in real time. Log interpretation and Formation evaluation from recorded logs.
Experienced Oil and Gas professional with over 12 years engineering, applications, marketing experience. Self starter with experience in Electric Submersible Pumps (ESP), Variable Speed Drives (VSD/VSC), downhole instrumentation, permanent monitoring and fiber optic monitoring systems.
I am a process control engineer with over 15 years of experience of design, implementation and commissioning of process controllers for the refining and petrochemical process units. I am available to work on contract basis immediately.
I'm Egyptian Geophysicist with more than 15 years experiences in seismic data processing ( 2D & 3D). I gain experiences in well logs processing and producing synthetic seismogram. My full detailed experiences are in my CV......Regards....
A total of eighteen (18) years, Electrical, Mechanical, Piping, Instrument drafting experience in a wide variety of industrial sectors
INSTRUMENTATION TECHNOLOGIST NAIT graduate June 30, 2004. Previous experience as Plant/Process Operator in coal mine. Seeking entry-level position in the industrial field that allows use of my acquired technical training and includes exposure to a wide variety of occupational related tasks
Mechanical Engineer with Masters and experience in oil and gas. Competent in thermal systems and two-phase flow analyses. Maintenance Engineering experience with rotating and fixed equipment.
SUMMARY OF EXPERIENCE •15 years Post Degree Experience in reputed multinational Oil & Gas, chemical process industries with emphasize to project execution, plant maintenance, and workshop management and inventory control on spare and consumables.
BSC in Mech. Eng., post grad. in Petroleum Eng., reservoir engineering exp.( developing and management, black oil, gas and composition reservoir simulation, tech. and econ. eval. Studies, IOR and EOR methods-8 yrs.) and IT consulting, services and project management (12 yrs.)
I have over 15 years of experience in this field and acquired enough knowledge. I had handled very challenging assignments. As an Instrument foreman I was fully involved in my business wherein I had to identify potential opportunities and gain wide knowledge.
I have ten years experience in SITEP (ENI partner) and my qualification is Maintenance supervisor
highly motivated exploration geophysicist
Instrument Design Engineer with 4 years of Experience in a world recognized oil and Gas Company JGC-Descon, having experience of Instrument Master Index , JB Wiring, ILD Generation, Main control Panel Wiring, PLC Cabinet Wiring, Main Control Panel Schematics Diagram, HOOKUps, MTO
Structural Cad Detailer, Site Engineer
Co-ordination and inspection of all Quality Control activities like Surveillance of day to day Fabrication, Welding and Erection of Piping and Structural works of Rigs, Co-ordination with clients, Reporting to Project Managers, Coordinating and witnessing of various N.D.T & Destructive testing.
Mechanical Engineer with AWS CWI # 09021281. I have 4.5 years experience in the field of Quality Control and welding inspection in Oil & Gas Projects involving Onshore Pipelines and piping of platforms, Piping of Refineries, process plants. Fabrication of Pressure vessels, Boilers and Heat ex
Heavy diesel mechanic since leaving school 20 years ago
Designer having 10+ years of experience in the Electrical detailed engineering on Power Plant, Oil &Gas (Onshore/Offshore) and Petrochemical projects in both Indian & Global projects.
ACS800,ACS550,ACS600,ACS1000(all ABB),DCS500,DCS800(both ABB),Drive Window, Winder Soft, IGSS7.0, PL7PRO, UNITY XL,FieldBus,HART,BrainTCP/IP,DH+,DNP,MODBUS
With regard to CAD capabilities, I have over 2 years experience in the following software: Microstation PDS EERACEWAY (3D Raceway Modeling) PDS DRAW (Drawing Manager), PDS PDS-EQUIP (3D Equipment Modeling), Microstation Java 7.1, Orthogen/PDS, AutoCad
Sr. Piping Design Engineer
Experienced instrumentation technician able to handle loop-check, termination, calibration of field instruments and devices
Cathodic Protetion Design,ECDA Survey,Soil Resisitivity
A result oriented professional with proven abilities in plant Electrical & control system. Preventive & Breakdown Maintenance in the field of Oil & Gas and Petrochemical Industry. Installation, Maintenance & Trouble shooting of Electric drives, HT & LT Switchgears & Protection Relays, Control Panels
Experienced Geologist with all types of Petroleum Geology experience including conventional, tight sand, shale & CBM.
To secure a position that will maximize my talent and expose me to the new challenges, as well as satisfaction in my immediate environment through hard work and professionalism
Drilling Engineer
Expertise in working with PFD's and P&ID's, Process Design Calculations and Process Simulators
Two years of experience in Process / Facility Engineering
Design Engineer with experience in 3D modelling and Stress Analysis
A highly motivated young engineer with proficient skills in ECLIPSE and Petrel RE, with great mind of problem solving, and with great personality in team work
Myself M.Tech in Naval Architecture seeking a responsible position in offshor eengineering. My area of interest is the structural analysis, fluid structure interaction, hydrodynamics, subsea pipelines analysis..
Piping Engineer
Drilling Technician
A seasoned subsea systems engineer with a detailed understanding of trees, controls and manifolds from front end feasibility and conceptualisation to offshore installation and commissioning.
Senior Structural Designer/Construction Support Specialist
qualified in six modules of different aspects of corrosion,and the confidence gained throughout the years while running my own consultancy
MWD Engineer
Control system designer / instrumentation
Civil / Structural Designer, PDMS, AutoCAD,
Quantitative Interpretation for Reservoir Characterization
13 Years Hands on Experience in Inspection (Plant Inspection) & Quality Control in Fabrication, Installation and Testing of Process & Utility Piping Work, Sub Sea Pipeline Work, Pressure Vessel and Offshore Steel Structures like Jacket, Deck, Bridge etc. in the field of Oil & Gas Development.
•Over 20 years of experience. •DCS- Delta-V , Foxboro I/A system and YOKOGAWA . •PLCs- Gould Modicon, Askawa, August Systems, HIMA etc. •Foundation Field Bus •Analytical systems Design and Engineering - Physical Property Analyzers, NIR •Field Inst. Engineering. •System commissioning.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   [ 47 ]   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com