Resume - APPLICATION FOR THE POST OF BLASTING AND PAINTING SUPERINTENDENT

Misco Jobs

Resume #81791

CONTACT INFORMATION:
View contact information...

PERSONAL DETAILS.
Age: 45
Gender: Male Place of Birth: Ipoh, Perak
Date of Birth: 5th April 1963 Marital Status: Married (Two Children's)
Race: Indian Languages: English, Malay and Tamil
Religion: Catholic

ACEDEMIC QUALIFICATON

LOWER CERTIFICATE OF EDUCATION - 1978

MALAYSIA CERTIFICATE OF EDUTATION 1980

NEGERI INSTITUTE OF TECHNOLOGY (AUTOMOBILE)

TRAINING / SEMINARS ATTENDED:

* Re ¨C Certification of Coating Inspector Institute of Materials Malaysia (IMM)
* Teknik Arahan yang Berkesan TG CONSULT SDN.BHD
* Lembaga Pembangunan Industri Pembinaan Malaysia CIDB
* Loss Prevention System ¨C (Train the Trainers) EPMI
* Passive fire Protection HEMPEL
* Offshore safety orientation and sea survival Training at TSTC
* Blasting and Painting Seminar AKZO NOBEL
* Supervisory Development Module 111 BCM CONSULTING
* Understanding Incidents And Investigation workshop MSE SDN.BHD
* JOTUN paint Seminar JOTUN (MALAYSIA) SDN.BHD
* Coating Inspector Institute of Material Malaysia IMM (LEVEL2)
* Offshore Safety Orientation and Sea Survival Training TSTC
* Management & Supervisory Development Module 11 AMCIT
* Corrosion Protection MSE
* Marine Coating Seminar COURTAULDS COATING (M) SDN.BHD
* Foreman Safety Course TG.BIDARA BEACH RESORT, MELAKA
* Safety Orientation course MSE SDN.BHD

WORKING EXPERINCES

COMPANY
POSITION HELD
PROJECTS
CLIENT
DURATION
RM LEOPAD SDN.BHD
BLASTING/PAINTING AND FIRE PROOFING MANAGER
ALL PROJECTS UNDERTAKE BY LEOPAD

VARIOUS CLIENT

30/4/2008
KENCANA HL
COATINGS SUPERINTENDENT
ALL PROJECTS UNDERTAKE BY KENCANA HL

VARIOUS CLIENT

1 YEAR CONTRACT IN 2007
VERSACORP ENGINEERING SDN.BHD

PROJECT MANAGER
OVERSEAS PROJECTS IN THAILAND AND BATAM
VETCO AIBEL THAILAND AND NIPPON STEEL BATAM

2005 TO 2006
JURUNATURE SDN.BHD
PROJECT MANAGER
FIRE PROOFING PROJECTS

VARIOUS CLIENT

2004 TO 2005
MALAYSIA SHIPYARD AND ENGINEERING SDN.BHD
TECHNICAL EXECUTIVE AND SENIOR SUPERVISOR

ALL PROJECT UNDERTAKE BY MSE

VARIOUS CLIENT

1991 TO 2004
JETTERS ENTERPRISE
OPERATION MANAGER
ALL PROJECTS UNDERTAKE BY JETTERS

VARIOUS CLIENT

1990 TO 1991
ENPATECH (S) PTE.LTD.
OPERATION MANAGER
IN SINGAPORE
ESSO
1989 TO 1991
LIBRA CONTRACTORS
SUPERVISOR
IN SINGAPORE
VARIOUS CLIENT
1985 TO 1990
TRANSEA CORPORATION (M) SDN.BHD

STOREKEEPER

IN PASIR GUDANG

MSE

1984 TO 1985
SEMANGAT MOTORS SDN.BHD

STOREKEEPER
DEALING WITH HONDA CARS

1982 TO 1984
PADOMAN SDN.BHD
STOREKEEPER
CROSS COUNTRY PIPE LINE
PETRONAS DEPOT
1980 TO 1982

ACQUIRED SKILLS:
Computer: Micro Excel, Words and Power Point

JOB DUTIES AND RESPONSIBILITIES AS A PROJECT MANAGER 2004 TO 2008

¡õ To oversea that all activities in the project execution from award to delivery shall be maintained and control through the use of documented quality general and details procedures.
¡õ To co-ordinate the interfacing with Client Site.
¡õ To ensure all activities shall be planned and controlled by the Project Management Team in conjunction with Client's Prescriptions site team to ensure compliance to quality plan, contract requirement and project schedule.
¡õ In- house progress meetings shall e conducted with the Client to address site problems, client request, schedule, non-conformance on project, HSE requirement and to initiate the appropriate corrective actions required.
¡õ To ensure the fabrication shall be carried out sequentially as per fabrication sequence prepared for the project with the consent by Client and within the time frame allocated in the Project schedule.
¡õ Optimization of manpower and facilities
¡õ Ensure all subordinates shall strictly comply with Safety Rules and Regulations and works are executed in a safe manner.
¡õ Liaise with other interfacing disciplines
¡õ Ensure that daily tool box talk and permit to work is carried out.
¡õ Daily monitoring on HSE Walkabout findings.

JOB DUTIES AND RESPONSIBILITIES AS A TECHNICAL EXECUTIVE AND SENIOR SUPERVISOR 2004 TO 1991.

¡õ Familiarize and fully understand all the technical specification, codes and standards required.
¡õ Check every discipline shop drawings as prepared by their respective designer.
¡õ Ensure design integrity and construction quality in accordance to specification and good engineering practice.
¡õ Based on overall schedule, prepare detailed schedule of blasting and coating's discipline.
¡õ Prepared the coatings scope of work, fabrication sequence, technical requirement, work schedule and necessary list of drawings for the sub-contractor work.
¡õ Based on planned schedule, monitor the manpower requirement and equipments for the project.
¡õ Accepting or rejecting the materials purchase if it is not complying with the specification.
¡õ Liaise closely with QA/QC Engineers and QC personnel to ensure that all executed works have been inspected to project requirement.
¡õ Ensure all subordinates shall strictly comply with HSE Rules and Regulations and the works are executed in a safe and proper manner.
¡õ Prepare preliminary charge proposal and submit to the project manager prior for the official submission.
¡õ Maintaining cleanliness of the fabrication sites its office.
¡õ Co-ordinate with purchasing officers on the delivery of materials.
¡õ Prepared all working procedure for the project execution.
¡õ Prepared JSA / Conduct the PERMIT TO WORK.
¡õ Liaise with scaffolding that required for Blasting and Painting works.
¡õ Ensure that daily tool box talk and permit to work is carried out.
¡õ Daily monitoring on HSE Walkabout findings.

JOB DUTIES AND RESPONSIBILITIES AS A OPERATION MANAGER 1985 TO 1990.

¡õ In charge of all aspect of accounts, progress claims, progress monitoring, manpower distribution and fabrication works.

JOB DUTIES AND RESPONSIBILITIES AS A STOREKEEPER 1980 TO 1985

¡õ Responsible for goods receiving, issuance of goods, prepare monthly stock reports to management.
¡õ Purchase of Spares and others and also conduct Audits.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 7055)

Go to Search Parameters...

Brief Description

A Civil/Structural Engineer having 14+ years of Consultancy experience in Structural Design and Project Management for Process, Oil & Gas and Power & Energy Projects. I have good knowledge and experience of Canadian, British, Indian, American & various Process industry standards.

Control System engineer with more than 14 years of experience with Yokogawa Systems Engineering

Electrical & Instrumentation Engineer experienced in Testing & Commissioning Instruments in FPSO, Installation of Electrical services in the Power plants (Gas turbine, Hydro, Steam turbine), Commercial Buildings, MRT and Commissioning of Process Control System in Water Treatment Plant.

APPLICATION FOR THE POST OF BLASTING AND PAINTING SUPERINTENDENT

I have different skills from farming to superivor to general labor skills inthe oil and gas industary.amd also I have some sales experance

Lead Drilling Fluids Engineer / Mud Engineer / Drilling fluids specilalist/ Mud Manager/Drilling Supervisor/ Drilling Engineer

I am Mech Engg post graduate(Prodn Engg). I have experience in using CAE packages Hypermesh,Ansa and Nastran and performing static ,Normal mode and fatigue analysis

28 years experience with industrial design drafting work. Assignments have involved equipment layouts, P&ID development, material take-offs, estimating, checking and field work in addition to developing construction drawings and fabrication isometrics.

Electrical Technician with 20 years experience in the oil and gas industry.

A total of 10+ years experience in Pipe Stress Engineering and Mechanical Stress Analysis in

Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.

Application For Mechanical Inspector/Engineer

B.Tech (Mechanical Engg-5years's degree course with SAP experience in Procurement in Oil /Petroleum Refinery in India)

Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.

Petroleum Engineer with 13 years experience in the Oil and Gas Industry with solid knowledge in Geopressure analysis, Well design, MWD operations and rock properties analysis; project management skill (estimating/cost, control/scheduling); bilingual Spanish-English; APEGGA EIT# 92804 and Worldwide.

To obtain a position as Suitable position in process control Instrumentation that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.

Highly Qualified Draughtsman

Total Of 16 Years Experience In Drafting And Detailing Of Piping Drawings And Other Drawings In Compliance With The International Standards. Experience Achieved Is In Line Of The Chemical / Petrochemical / Refinery And Connected Utilities Piping Jobs.

PDMS mid-level piping designer with a specialty in PDMS DRAFT, Misc. pipe supports, equipment modeling and sloped pipe.

Production/drilling engineer hold Master from IFP; working in Workover operation

Free! Worked as a Drilling Fluids Engineer / Technical Service Coordinator for the past 13 years.

Installation, commissioning, testing & operation of transformers, Power Control Centre, Machine Control Centre Panels

M.Sc with 15 years Laboratory experience in Analytical Lab.

Electrical Engineer

Piping Engineer (PDMS)

PDMS AUtocad 3d Multisteel Civil/Structural Design Draughtsman

I have been described in previous positions as hard working; honest; reliable; a team player and a good communicator. It has been said that I excel in new challenges and I have an excellent work record.I am at present available to take up any position within the cementing or tools in a supervisory

Preparation of FEED & ITB documents (Instrumentation, Telecom & F&G)

Able to plan, organize, and implement complex design projects within prescribed time and budget. Field experience and Construction Representative on major projects. Worked and knowledge of ASME B31.3, API, and ASTM.

Piping design and checking:Cadworx, Bentley 3D, Autoplant

Piping Designer - Mechanical / Piping.

G&G and engineering data management, MS-Office applications; petroleum software and databases, industry regulations, regulatory form preparations etc.

I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.

I have had twenty years experience in the Petroleum Industry ranging from Drilling, Production, Completion, and Work-over engineering in all types and configurations of wells and drilling units/production platforms both onshore as well as offshore. I have worked in Canada, Saudi Arabia and Thailand.

20+ years in offshore engineering; including marine, structural, pipeline, and project engineering

About 25 years of Process Engineering experience including fifteen years with EPC companies in the Arabian Gulf states in the Oil & Gas industry.

Sr. Rotating Equipment Engineer with 20years experience in Turbo-compressors up to 42 MW rating of Refinery, Petrochemicals & Ammonia Plants. In depth experience in troubleshooting, maintenance/major overhauling/modifications, failure analysis, condition monitoring and vibration analysis

Backround in Electrical Engineering/Design with emphasis of Project Management, Production/Manufacturing with more than 15 years experience in Electrical Design/Construction work and familiar with Standards Procedures as well as with the Industry standards such as ANSI, API, NEC, etc

Senior Rotating Engineer

A Process Engineer with a Masters Degree in Chemical Engineering from the University of Waterloo, ON, Canada and 10+ years experience in natural gas and polymer processing industries. Specialize in process optimization, manufacturing and troubleshooting.

I have over 16 years of working experience as a QC Inspector in petroleum and petrochemical construction Industry. I have knowledge and experience as Q/C inspector in various inspection activity like raw material inspection, welding procedure / welder performance qualification,various methods of NDT

I've developed leadership qualities and a proactive attitude, all of these combined with my experience in Maintenance and Well Production Operations, supported with software and techniques on Equipment condition analysis, laser alignment, corrosion testing, boroscopic inspection and vibration analys

Mechanical engineer in Oil&Gas Feild 18 yrs Experience in Installation, maintenance, QC in Static, Rotating equipments.

Able to learn Work Process and new software with ease. Experienced in the refinery of Blueprints, Isometrics, and P&ID¡¦s, Hand Skecthes. Experienced in structural steel supports and familiar in estimating material take-offs. Trouble shooting installation of pipe and assist Engineers in the field.

PhD Petroleum Engineer (Production Technologist)

M tech stctural engineer in Civil department, i am having expeerience in oil and gas as sr engineer in civil and structural department.

Assistant Driller - Main activities and responsibilities on the rig DRILLMEC HH - 220

Project Engineer & System engineer along with detail design experience and product development expertise gained from 20+ years working for NASA.

I am a Mechanical Engineer with work experience basically in Oil & Gas and Refining Project Management, Gas Compression Plant Maintenance, and Process Safety Management. Currently I live in Venezuela and planning to relocate to the United States. I have dual citizenship and fluent in both languages.

25 years of professional experience in the Front-end and Detailed Design and Engineering, Projects Engineering, PMC, Factory & Site Acceptance Testing, Supervision of Installation, Testing and Commissioning of state-of-art DCS, SCADA, Safety Shutdown and F&G Systems and field instrumentation

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out