Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #81792 next resume »»
CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE

May '08 – Dec '08 ConocoPhillips, Sembawang Shipyard
Instrument Technician Bohai Bay FPSO Phase II

Scope of Works: Responsible for calibration, testing & commissioning of Instruments for Crude Oil Emulsion Centrifuge System, Co-ordination with vendors for the communication signals (Modbus & TCP/IP) between Unit Control Panel and the Process Control in Central Control Room.

Mar '05 – May '08 ABB Industry Pte Ltd, Singapore.
Application Engineer.

Projects: 350MW Thermal Power Plant, Uong Bi, Vietnam, Excitation System for Seraya Power Plant, Singapore, Multistory Commercial Building, Singapore & Changi Water Treatment Plant, Singapore.
-Design & Co-ordination for Input / Output List for Control System in Thermal Power Plant.
-Responsible for the coordination submission of shop drawings for Multistory Building.
-Commissioning of Process Control System involves 3MVA Transformers, 1800KW Motors and Variable Frequency Drives.

Aug '03 – Dec '04 Kumagai–Skanska-HCC-Itochu JV, Senior Electrical Engineer.
Delhi Metro Rail Project, India.

Scope of Works: Electrical & Mechanical Installation includes Electrical, Environmental Controls, Fire, Hydraulic & Building Management systems for Underground metro project for 4 stations including 4.2 km cut & cover tunnel works.
-Checking of drawings submitted by the sub contractors for the services against the tender drawing and contract specifications.
-Co-ordination of E&M services with respect to structural openings during construction.
-Co-ordination with various system wide contractors like Signal & Telecom, HT & Traction power, AFC gates, Lift & Escalator contractors for their service installation.

Dec '02 – Jul '03 Jurong Shipyard, Electrical & Instrumentation Inspector.
HALLI BURTON in FPSO Conversion Project.

Scope of Works: Responsible for quality checking and ITP inspections in accommodation blocks office main deck, operation deck Lower & Upper Platform in Jurong shipyard. Pre-commissioning checks & commissioning of Fire & Gas Instruments, Electrical Installations, Ventilation and AC units. Preparation of ITP and clearing of punch list.

Aug '02 – Oct '02 Equator Engineering Sdn Bhd, Electrical Engineer
350 MW Combined Cycle Power Plant, Penang, Malaysia.

Scope of Works: Testing & Commissioning of Analog & Digital Instruments like Pressure, Temperature, Flow & Level Transmitters

May '00 – May '02 AMEC Group Singapore Pte Ltd,
Electrical Construction Engineer.
North East Line MRT Project, Singapore.

Scope of Works: Electrical Installation includes Main LV Switchboards, Distribution Boards, Cables, Bus Bar, Lighting, Power and Lightning Protection.
-Responsible for Co-ordination with Civil contractors and other System wide Contractors for the requirement of power supplies to their equipments.
-Supervision & Control over the installation of works by Subcontractor.
-Progress monitoring using work packs, attending co-ordination meeting, liaise with Design department, attending clients meeting, and following up material deliveries.

Feb '00 – May '00 Montgomery Watson Asia, Electrical Technical Officer.
Kim Chuan Sewage Treatment Works Project, Singapore.
Scope of Works: Consulting service to the refurbishment and extension of the above project.
-Review contract documents & specifications.
-Review drawings by the Contractors.
-Attending Inspections and witness tests.

Dec '98 – Feb '00 HTE Engineering Pte Ltd, Project Engineer.
HDB Flatted Factory, Bukit Batok, Singapore.

Scope of Works: Installation of LV Switchboard, Distribution boards, Bus bar, Cables, Lighting, Power and Lightning Protection.
-Supervision & Control over the installation of works by subcontractor.
-Prepare Shop drawing from the contract drawings by considering the possible implementation and comply with design requirement.
-Liaise with consultant on any design discrepancies, with the suppliers for the catalogue and sample submission, with purchase department for the material requirements.
-Attend co-ordination meeting with main contractor and other domestic contractors.

Jun '98 – Oct '98 Babcock –Hitachi K. K, Assistant Commissioning Engineer.
2 x 600 MW Steam Turbine Power Project, Tuas, Singapore.
-Responsible for the Energisation of MCC's and Motorized Valves
-Responsible for the Sequence & Functional checks for the Motorized Valves.

Jul '97 – May '98 The General Electric Company (S) Pte Ltd, Project Engineer.
New Nanyang Polytechnic, Ang Mo Kio, Singapore.

Scope of Works: Installation of LV Switchboard, Distribution boards, Cables, Lighting, Power and Lightning Protection.
-Supervision & Control over the installation of works by subcontractor.
-Liaise with Consultants on design requirements.
-Co-ordination with Main Contractor & Sub- Contractor to ensure that works progress meet Master Project Schedule and project milestones.
-Led a team of supervisors, foreman & electricians to ensure the completion of critical activities.
-Sourced materials and liased with vendors on delivery requirements.

May '94 – Jan '97 Equator Engineering Sdn Bhd, Electrical Engineer.

Project: 4 x 150 MW Hydroelectric Power Project, Kota Bahru, Malaysia.
Client: GEC (M) Sdn Bhd Period: Mar '95 – Jan '97

Scope of Works: Erection of Generator, Transformers, Auxiliary Transformers, Isolated Phase Bus Bars, Generator Circuit Breakers, 6.6 KV Switchgears, LV Bus Ducting, Switchboards and Control panels, MV & LV Cabling and Termination and Earthing Installations.
-Supervision & Control over the installation of works by subcontractor.
-Led a team of direct supervisor and skilled worker to meet the critical deadlines.
-Liaise with clients regarding technical queries and design criteria.
-Maintaining the progress records using Computer Based Project Management System (CBPMS).

Project: 3 x 110 MW Gas Turbine Power Project, Johor, Malaysia.
Client: John Brown (M) Sdn Bhd. Period: May '94 – Mar '95

Scope of Works: Erection of 33 KV Auxiliary Equipments, Landing Gantries in Switchyards, and Installation of Switchboards, Charger Panel, and Control Panels. Installation of Power, Control and Instrumentation Cables, Lighting and Small Power in Control Building
-Supervision & Control over the installation of works by subcontractor.
-Prepared weekly schedules, prepared daily and weekly progress reports.
-Submit claims for variations works.

Aug '92 – Dec '93 Meeco Graphics, Service Engineer.
10/1, Queen's Road, Bangalore, India.
-Troubleshooting of photocopier PCB Boards.

EDUCATIONAL QUALIFICATIONS

Bachelor of Engineering (Electrical & Electronics Engineering)
University of Madras, INDIA. Year of Graduation: 1992

TECHNICAL QUALIFICATION

Post Graduate Diploma in Microprocessor & Computer Hardware (PGDMH)
National Center for Computing Techniques, Bangalore, INDIA.

COMPUTER SKILLS AutoCAD, MS Office & Microsoft Project

PERSONAL PARTICULARS

Date of Birth 18th April 1970
Nationality Singapore Citizen
Sex Male
Marital Status Married
Driving License 2A/3
Language Spoken English, Tamil & Malay
Language Written English & Tamil

View contact information...
«« previous resume next resume »»
Search Results (Resumes 701 to 750 of 7055)Go to Search Parameters...
Brief Description
A Civil/Structural Engineer having 14+ years of Consultancy experience in Structural Design and Project Management for Process, Oil & Gas and Power & Energy Projects. I have good knowledge and experience of Canadian, British, Indian, American & various Process industry standards.
Control System engineer with more than 14 years of experience with Yokogawa Systems Engineering
Electrical & Instrumentation Engineer experienced in Testing & Commissioning Instruments in FPSO, Installation of Electrical services in the Power plants (Gas turbine, Hydro, Steam turbine), Commercial Buildings, MRT and Commissioning of Process Control System in Water Treatment Plant.
APPLICATION FOR THE POST OF BLASTING AND PAINTING SUPERINTENDENT
I have different skills from farming to superivor to general labor skills inthe oil and gas industary.amd also I have some sales experance
Lead Drilling Fluids Engineer / Mud Engineer / Drilling fluids specilalist/ Mud Manager/Drilling Supervisor/ Drilling Engineer
I am Mech Engg post graduate(Prodn Engg). I have experience in using CAE packages Hypermesh,Ansa and Nastran and performing static ,Normal mode and fatigue analysis
28 years experience with industrial design drafting work. Assignments have involved equipment layouts, P&ID development, material take-offs, estimating, checking and field work in addition to developing construction drawings and fabrication isometrics.
Electrical Technician with 20 years experience in the oil and gas industry.
A total of 10+ years experience in Pipe Stress Engineering and Mechanical Stress Analysis in
Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.
Application For Mechanical Inspector/Engineer
B.Tech (Mechanical Engg-5years's degree course with SAP experience in Procurement in Oil /Petroleum Refinery in India)
Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.
Petroleum Engineer with 13 years experience in the Oil and Gas Industry with solid knowledge in Geopressure analysis, Well design, MWD operations and rock properties analysis; project management skill (estimating/cost, control/scheduling); bilingual Spanish-English; APEGGA EIT# 92804 and Worldwide.
To obtain a position as Suitable position in process control Instrumentation that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.
Highly Qualified Draughtsman
Total Of 16 Years Experience In Drafting And Detailing Of Piping Drawings And Other Drawings In Compliance With The International Standards. Experience Achieved Is In Line Of The Chemical / Petrochemical / Refinery And Connected Utilities Piping Jobs.
PDMS mid-level piping designer with a specialty in PDMS DRAFT, Misc. pipe supports, equipment modeling and sloped pipe.
Production/drilling engineer hold Master from IFP; working in Workover operation
Free! Worked as a Drilling Fluids Engineer / Technical Service Coordinator for the past 13 years.
Installation, commissioning, testing & operation of transformers, Power Control Centre, Machine Control Centre Panels
M.Sc with 15 years Laboratory experience in Analytical Lab.
Electrical Engineer
Piping Engineer (PDMS)
PDMS AUtocad 3d Multisteel Civil/Structural Design Draughtsman
I have been described in previous positions as hard working; honest; reliable; a team player and a good communicator. It has been said that I excel in new challenges and I have an excellent work record.I am at present available to take up any position within the cementing or tools in a supervisory
Preparation of FEED & ITB documents (Instrumentation, Telecom & F&G)
Able to plan, organize, and implement complex design projects within prescribed time and budget. Field experience and Construction Representative on major projects. Worked and knowledge of ASME B31.3, API, and ASTM.
Piping design and checking:Cadworx, Bentley 3D, Autoplant
Piping Designer - Mechanical / Piping.
G&G and engineering data management, MS-Office applications; petroleum software and databases, industry regulations, regulatory form preparations etc.
I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.
I have had twenty years experience in the Petroleum Industry ranging from Drilling, Production, Completion, and Work-over engineering in all types and configurations of wells and drilling units/production platforms both onshore as well as offshore. I have worked in Canada, Saudi Arabia and Thailand.
20+ years in offshore engineering; including marine, structural, pipeline, and project engineering
About 25 years of Process Engineering experience including fifteen years with EPC companies in the Arabian Gulf states in the Oil & Gas industry.
Sr. Rotating Equipment Engineer with 20years experience in Turbo-compressors up to 42 MW rating of Refinery, Petrochemicals & Ammonia Plants. In depth experience in troubleshooting, maintenance/major overhauling/modifications, failure analysis, condition monitoring and vibration analysis
Backround in Electrical Engineering/Design with emphasis of Project Management, Production/Manufacturing with more than 15 years experience in Electrical Design/Construction work and familiar with Standards Procedures as well as with the Industry standards such as ANSI, API, NEC, etc
Senior Rotating Engineer
A Process Engineer with a Masters Degree in Chemical Engineering from the University of Waterloo, ON, Canada and 10+ years experience in natural gas and polymer processing industries. Specialize in process optimization, manufacturing and troubleshooting.
I have over 16 years of working experience as a QC Inspector in petroleum and petrochemical construction Industry. I have knowledge and experience as Q/C inspector in various inspection activity like raw material inspection, welding procedure / welder performance qualification,various methods of NDT
I've developed leadership qualities and a proactive attitude, all of these combined with my experience in Maintenance and Well Production Operations, supported with software and techniques on Equipment condition analysis, laser alignment, corrosion testing, boroscopic inspection and vibration analys
Mechanical engineer in Oil&Gas Feild 18 yrs Experience in Installation, maintenance, QC in Static, Rotating equipments.
Able to learn Work Process and new software with ease. Experienced in the refinery of Blueprints, Isometrics, and P&ID¡¦s, Hand Skecthes. Experienced in structural steel supports and familiar in estimating material take-offs. Trouble shooting installation of pipe and assist Engineers in the field.
PhD Petroleum Engineer (Production Technologist)
M tech stctural engineer in Civil department, i am having expeerience in oil and gas as sr engineer in civil and structural department.
Assistant Driller - Main activities and responsibilities on the rig DRILLMEC HH - 220
Project Engineer & System engineer along with detail design experience and product development expertise gained from 20+ years working for NASA.
I am a Mechanical Engineer with work experience basically in Oil & Gas and Refining Project Management, Gas Compression Plant Maintenance, and Process Safety Management. Currently I live in Venezuela and planning to relocate to the United States. I have dual citizenship and fluent in both languages.
25 years of professional experience in the Front-end and Detailed Design and Engineering, Projects Engineering, PMC, Factory & Site Acceptance Testing, Supervision of Installation, Testing and Commissioning of state-of-art DCS, SCADA, Safety Shutdown and F&G Systems and field instrumentation
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   [ 15 ]   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com